I reinstalled I-Tunes several weeks ago. Since then I can no longer burn MP3 Discs with Title and Artist Info. Sometimes it only burns every 3rd song. No Audio CD it seems to function OK. The version has the "cloud" but I don't know if that matters or
I reinstalled I-Tunes several weeks ago. I can no longer burn MP3 Disk with Song/Artist info onto disc. It comes up as No Artist/No Title on car CD unit. Old MP3 Disk previously recorded still show all info. Sometimes only every 3rd song is on the MP3 CD. On Audio Disc there is no change and all info still shows up. The new I-Tunes version has the "cloud" on it if that could make a difference. In the select Burn CD mode I can select testing and add song info for Audio Disk but it shows shadowed out for MP3/Data. I added and removed ID tagging from my list to see if that made a difference but it didn't.
Any Thoughts?
Jim
This may help. Audio files are actaully in the DATA folder. These can be editted with Soundbooth then they must be imported intot the specific slide in the Powerpoint presentation. Publish the presentation (as you'll read below) and *should* work This reply came from robva65 [email protected]
Let's try this: *Publish* the PPT deck you have. What you'll end up with is a set of files and folders, but I want you to look for the *data folder* that's created as a result of the publishing process. (Unless you specify where you're publishing to, Presenter will publish to a directory called "My Adobe Presentations" by default, so you may have to look there on your harddrive) Inside the data folder will be a list of mp3 files, which, if everything goes smoothly, should make it much, much easier to see which audio is used by a specific slide.
Here's what I mean: for example, after publishing, I have a data folder and inside I found the following file: a24x9x3.mp3 As I double click the mp3 file (which causes it to play using Windows Media on my laptop), I can hear that it corresponds to my slide 9 in my PPT deck. And there's corresponding mp3 files for each and every slide I have in my deck. I'm clicking another file (wouldn't it be nice to see what I'm doing???) a24x20x3.mp3, and that file corresponds to my slide 20 content in PowerPoint.
So again, give publishing in PowerPoint a shot and see if that makes it any easier. Well...not nearly as easy as recording in Audition/Soundbooth/Audacity, but it's close enough to hopefully dig you out of that hole you're in now.
Hope this helps ~rich
Similar Messages
-
My old PC with my Itunes library died. I have attempted to authorize it's replacement but the store tells me I have reached my limit of five. I don't recall doing this so my guess is that and old dead Ipod as well as old dead PC's could be deauthorized ONLY and I would be good. As I read the Itunes store options it appears I can only deauthorize all five. I am afraid I will loose all my library; I'm not shure I have an up to date backup with Itunes I am reluctant to take that step.
I can take the hard drive out of the dead computer and fix so that I can restore from an up to date library. I have never done this before and am scared I might erase my best option. I also have a major portion of my library on a NANO which replaced the dead IPOD which maybe can be used to restore the replacement PC.
I don't recall setting up Icloud and vaguely recall backing up to itunes but can't confirm that my library is completely backed up. Itunes tells me that my Ipad and a PC are authorized for Icloud but I don't recall setting that up. I can assume that the PC that is Icloud authorized is the one that died. If I have to deauthorize all, will I errase my library? If not will I have to restore my nano and Ipad and the replacement PC? How can I confirm that my library is backed up/in the cloud?
My Ipad shows cloud icons along whith what appears to be my library.
Given this info, what is my best option to restore my complete former Itunes library to my PC.
Thank
DRC16Many thanks lllaass,
The Touch Copy third party software for PC's is the way to go it seems and although the demo is free, if you have over 100 songs then it costs £15 to buy the software which seems not a lot to pay for peace of mind. and restoring your iTunes library back to how it was.
Cheers
http://www.wideanglesoftware.com/touchcopy/index.php?gclid=CODH8dK46bsCFUbKtAod8 VcAQg -
What do I do now that Photoshop CC has encountered an error while trying to upgrade. Suggesting retry does nothing. The numbers (49) appear, but I don’t know what that signifies. Help?
It is recommended that I ask for help, which put me here. What I really need is some customer service — not a chat room!If Windows :
Quit Creative Cloud desktop application .
Launch Photoshop cc 2014 application from C: > Program Files > Adobe Photoshop CC 2014 .
Once launched , click on Help menu in Photoshop cc 2014 and select Updates option .
It should update.
If Mac:
Quit Creative Cloud desktop application .
Launch Photoshop cc 2014 application from Applications folder:
Once launched , click on Help menu in Photoshop cc 2014 and select Updates option .
Let me know if you face any error .
Error 49 occurs while updating the application , when Creative Cloud app does not have reference / Access to installed CC app, so that it can apply updates for the same .
You can try to update from CC app like Photoshop itself and check. -
I recently upgraded to the newest version of iPhoto. I used to have version 7, I believe. Now that I have updated I can no longer see my pictures. I downloaded the upgrader but I don't know what to do next. Please help!
Go to your Applications/ Utilities folder. Finder the upgrader app. Double click it to run it.
-
I want to update my OS from X10.6.8 to the next level but I don't know what that is. Can someone tell me the next version to us? Thanks.
Upgrading to Lion
If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
You can purchase Lion at the Online Apple Store. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
Lion System Requirements
1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
or Xeon processor
2. 2GB of memory
3. OS X v10.6.6 or later (v10.6.8 recommended)
4. 7GB of available space
5. Some features require an Apple ID; terms apply.
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase a redemption code at the Online Apple Store: OS X Mountain Lion. Mountain Lion is $19.99 plus tax. Use the code to redeem a download of Mountain Lion from the App Store. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
OS X Mountain Lion - System Requirements
Macs that can be upgraded to OS X Mountain Lion
1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later.
2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model
Identifier 5,1 or later.
3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later.
4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later.
5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later.
6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later.
7. Xserve (Early 2009) - Model Identifier 3,1 or later.
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
See App Compatibility Table - RoaringApps.
Upgrading to Yosemite
You can upgrade to Yosemite from Lion or directly from Snow Leopard. Yosemite can be downloaded from the Mac App Store for FREE.
Upgrading to Yosemite
To upgrade to Yosemite you must have Snow Leopard 10.6.8 or Lion installed. Download Yosemite from the App Store. Sign in using your Apple ID. Yosemite is free. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
OS X Mavericks- System Requirements
Macs that can be upgraded to OS X Yosemite
1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
See App Compatibility Table - RoaringApps. -
I'm trying to connect to my home wifi with my imac gh5. After I enter the password it says connection timeout or password incorrect. I know there's no issue with the connection but I don't know what else to do. Does anyone know how to fix this problem?
What is the make & model of your home Wi-Fi router that you are attempting to connect your G5 iMac to? Which exact model of iMac do you have?
What wireless security type is your router using: WEP, WPA, or WPA2? If you temporarily disable wireless security, can the iMac connect to it now? -
My iPhone was stolen. How do I retrieve the pictures etc that were on imt. I know they must be in the iCloud but I don't know how to get into it from my iPad. Also, I would like to try to locate the phone ...how do I do that from my iPad?
These links may be helpful.
How to Track and Report Stolen iPad
http://www.ipadastic.com/tutorials/how-to-track-and-report-stolen-ipad
Reporting a lost or stolen Apple product
http://support.apple.com/kb/ht2526
Report Stolen iPad Tips and iPad Theft Prevention
http://www.stolen-property.com/report-stolen-ipad.php
How to Find a Stolen iPad
http://www.ehow.com/how_7586429_stolen-ipad.html
Oops! iForgot My New iPad On the Plane; Now What?
http://online.wsj.com/article/SB10001424052702303459004577362194012634000.html
Cheers, Tom -
I lost my ipod touch 5 in the school, but i don't know am i open the iclound
I lost my ipod touch 5 in the school, but i don't know am i open the icloud, and i don't know how to using icloud to find my touch, this touch is very important, have a lot of information
Did you set up find my ipod on the ipod itself?
Is the ipod on?
Is it connected to wi-fi?
If yes to all the above then go to icloud.com and see if you can find it.
Otherwise it cannot be tracked at all. -
<blockquote>Locked by Moderator as a duplicate/re-post.
Please continue the discussion in this thread: [/forum/1/675115]
Thanks - c</blockquote>
== Issue
==
I have another kind of problem with Firefox
== Description
==
My post on facebook disappear. My friend told me to try refreshing the page but I don't see a refresh button. How can I do this?
== This happened
==
A few times a week
== when i began posting on facebook
==
== Troubleshooting information
==
none
== Firefox version
==
3.6.3
== Operating system
==
Windows XP
== User Agent
==
Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3 (.NET CLR 3.5.30729)
== Plugins installed
==
*-getplusplusadobe16249
*nphpclipbook
*DivX Web Player
*Office Plugin for Netscape Navigator
*Adobe Shockwave for Director Netscape plug-in, version 10.2
*The QuickTime Plugin allows you to view a wide variety of multimedia content in Web pages. For more information, visit the QuickTime Web site.
*Coupons, Inc. Coupon Printer DLL
*Adobe PDF Plug-In For Firefox and Netscape
*Default Plug-in
*Shockwave Flash 10.0 r45
*iTunes Detector Plug-in
*Windows Presentation Foundation (WPF) plug-in for Mozilla browsers
*Next Generation Java Plug-in 1.6.0_17 for Mozilla browsers
*Npdsplay dll
*DRM Store Netscape Plugin
*DRM Netscape Network ObjectSee Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4.
Some users have reported as many as 8 or 9 attempts were necessary before success.
If the issue persists...
Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
Be sure to make an appointment first... -
I need to check the information i have into the cloud boy i don't know how to reach it.
I Need to check the information i've in Icloud but i don't know how to reach it.
Go to http://icloud.com and log in. Whatever is in iCloud that c an be seen, should be able to be seen from there. Other things may need to be restored directly to a device to be seen though.
-
I am confused as to how to connect my external start botton. I would like it to function like a start button on a front panel of a VI. I would like to use the +5V on pin 14 but I really don't know where to go from here. Any guidence for a novice would be most appreciated.
phod,
This is the LabVIEW Real-Time forum, so I suggest that in the future that you post this type of question to the Multifunction DAQ forum.
For the simplest solution you will have to connect your button to a digital line of your board, consult the sc-2345 user manual for a diagram of where these lines are exposed. You will have to connect your start button in series with a line that is high, such as your 5V pin or another digital line. Then connect this to a digital line that will be your start trigger.
Your program can poll the digital line that is connected to your button in a while loop and when it goes high, it lets the rest of the program execute. For the programming, I suggest you take a look at the shipping examples that come with LabVIEW. If yo
u have LabVIEW 7.0 go to Help>>Find Examples. Open Hardware Input Output>>Traditional DAQ>>Digital Input and Output>>E Series for some examples of digital I/O programming with E-series boards.
Hope that gets you started.
Gerardo -
A few days ago, I updated the OS. Since then, I have been unable to access saved recordings on my Voice Memo app. Additionally, recordings I have made since then have been made unavailable to me as well. All of the recordings are listed, but will not play when I select the play option, nor will the app allow me to edit them if I wanted to change their names, or something. There is nothing noticably wrong with the touch screen itself, meaning, there are no dead spots that do not respond to touch. I cannot figure out why the memos will not play.
Is this a glitch with the new update? If so, how do I revert back to the OS setting I had prior? Preferrably, I would like to find a fix for this situation in the condition my device is now without having to adjust the OS settings.Can you record and play new VMs?
Can you sync them to your computer?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from a back that was made then the VM played back. See:
iOS: How to back up -
Download for the cloud but I don't have a cloud
I just downloaded Itunes 11 and was messing with it when I noticed the cloud buttons in the corner. I click one, to investigate and it downloaded a song. It was a song that I never owned before. I havne't paid for iCloud, and I don't recognize half of the songs. Can someone explain this to me please because it's really confusing. Thanks
Cloud Plans https://www.adobe.com/products/creativecloud/buying-guide.html
Adobe Education
One Year Intro Price http://forums.adobe.com/thread/1448933?tstart=0
http://www.adobe.com/products/creativecloud/students.edu.html
http://www.adobe.com/products/creativecloud/buying-guide-education.html
http://www.adobe.com/education/students/student-eligibility-guide.edu.html
ID Proof http://www.adobe.com/store/au_edu/academic_id.html -
I want the photos from my phone to be uploaded to the icloud but I dont want photos to be downloaded to my phone. Is there a way I can do that? the photos are taking up too much space and I can't download the new IOS 6.
If by 'Allfiles' you mean 'All My Files' then what you see is correct. The All My Files option under Favorites shows all the files in your user folder. All your documents, music, movies, pictures, everything. Under the View menu you have an 'Arrange By' selection that can arrange all your documents by what kind they are, by what Application owns them, or by name, date, etc.
Since this isn't what you want, unselect 'All My Files' and choose the folder you want to see. BTW, those items under Favorites are user adjustable. You can drag a folder into that blue area under Favorites to add it to the Favorites and you can remove one by holding the Command key and dragging it from favorites into the desktop. You'll see the icon change into a cloud and when you release the mouse it will disappear. -
I am very frustrated. I decided to cancel the restoring process and I can't still access my music because is loading iTunes Match.... this has been going on now for weeks, where i ahve turned off the data mobile and stick to wifi.... Nothing seems to work. Any help mroe than appreciate it.
Hi
You should ask your relative to physically take the iPhone to the store rather than shipping it because as diesel vdub has said:
"No Apple store will accept an iPhone shipped to them"
All you have to do is safely pack and ship your iPhone from the Philppines to your California-based relative.
HTH?
Tony
Maybe you are looking for
-
Jbo.domain.Date - what the heck is ...
Hello, I am trying to import some data from file into view. I get my hands on ViewObject, I createRow() and ... when I try to set my jbo.domain.Date mapped attribute with row.setAttribute("StartTime", date), where Date is a valid java.util.Date (or w
-
OS clients supported by WLC vesion 7.0.240.0
Hi, I want to know the supported OS clients by the WLC version 7.0.240.0. I went through the release notes of this vesion but did not find anything related to supported OS clients. Customer wants to run Windows 8 on this version. WLC model is 4402 an
-
Hi experts, I have a problem with PO. I am using BAPI_PO_CREATE1 function module for generating orders. Problems concern delivery dates. Generally when the del. date should be saturday or sunday system will automatically change this date to first wor
-
Hello guys, Just one question, How can i put one long text in TWO lines in the message area..? I am showing a messager error too longer, so i would like to take off the scroll bar and split the text in two lines. thx..
-
Hi All, I created an workbook and inserted an query into the workbook, but upon refreshing the query in workbook it is not asking for a date to refresh,do you know the setting to ask for a date when i click refresh. Thanks, V.Singh.