Assigning lower level contract

hi all,
I created a master contract and now I want to assign a lower level contract to it but it receive this message:" Contract data cannot be edited for document type CQ". I have already completed the customizing of VORB ( I assign CQ to GK here) but still I receive this error and system do not let me to link the lower contract to the master contract with GK type. Also I have read all appropriate links in scn and sap helps and those links was not helpful for my case.  Any suggestion in this case will be really appreciated.
regards,
Nooshin

Go to VOV8, select that contract type and execute.  There check what is maintained for the field "Message: Master Contract".  It should be blank.
G. Lakshmipathi

Similar Messages

  • Assigning Lower Level Contract(s) to Master Contract

    I've looked all around here and can not find the answer.
    So I have a Master Contract (type GK). Now I want to create other Contracts and have them displayed as lower levels in the Master Contract.
    If I create a new Contract, and enter the Master contract number in the header, I receive the error "Referenced document  is not a group master contract"
    Ultimately I want to create numerous contracts referencing the Master, so I can view them all under teh Master Contract. I do not simply want to create with reference and use doc flow.
    Anybody ?

    Hi PLs refer below steps
    Creating Master Contracts
    1. In the initial screen, choose Logistics -->Sales and distribution -->Sales.
    2.Choose Contract -->Create.
    3.In the Contract field, choose the contract type Master contract (GK is the master contract type in the standard system) and, if necessary, the organizational data.
    The values for sales organization, distribution channel, and division may be proposed from the user parameters. Entries for the sales office and sales group are optional.
    4.Choose Enter.
    5. Enter the number of the sold-to party in the Sold-to party field.
    6. Choose Enter.
    7. Check the data on the following screens and, if necessary, enter additional data:
    Business data
    Partner
    Contract data
    Billing plan
    Linking a Contract to a Master Contract
    On the initial screen, choose Logistics ->Sales and distribution ->Sales.Choose Outline agreement ->Contract ->Create.
    You can also link existing contracts to master contracts. In this case, choose Outline agreement ->Contract ->Change. Then enter the contract number and go to step 6.
    Enter the contract type and, if necessary, the organizational data.
    The values for sales organization, distribution channel, and division may be proposed from the user parameters. Entries for the sales office and the sales group are optional.
    Choose Enter.
    If you have activated the check for existing master contracts in Customizing and master contracts already exist for the customer, a dialog box appears. You can branch from the dialog box into the list of master contracts and select a suitable master contract from the list by placing the cursor on the master contract and choosing Copy.
    If no dialog box appears, you reach the contract overview screen. Either enter a master contract number or search for a suitable master contract using a matchcode.
    Choose Enter.
    The system determines whether the reference is valid by checking that
    u2013 The contract type can refer to the master contract type
    u2013 The identical fields match
    If the reference is valid, the system copies the data from the master contract into the contract according to the referencing procedure assigned to the master contract.
    If the reference is not valid, the system issues an error message. If the identical fields do not match, it deletes the number in the Master contract field. In this case, either enter a suitable master contract number or check the settings in the Customizing activity Define Referencing Requirements.
    Enter any other data you require.
    The referencing procedure in the master contract controls whether you can change the data which was copied from the master contract.

  • Collective Planned orders Scheduling for lower level orders with reference to the Superior order

    Hi All,
    Collective planned order scheduling.
    I have been trying to reschedule the superior planned order and i was expecting the lower level planned orders to reschedule based on the superior planned order.
    My problem is
    when i try to reschedule the superior planned order the system is not rescheduling the lower level planned orders.
    For example if i change the basic finish date of superior planned order as 30/09/2014 and reschedule the planned order it is only scheduling the header planned order and the lower level planned order is not scheduling.
    Could some one tell me why this is not happenning at planned order level.
    As the rescheduling of collective order will work at production order level but for some reason it is not happening at planned order level(as there is no option available to do so).
    Please give your thoughts on this asap.
    Mahee.

    Hello Mahee
    Please observe that your system is working as designed. Planned orders are scheduled independently, even when they are part of a network/collective order. Note 152319 explains the planned order scheduling in detail and it provides the following information:
    * No scheduling of overall networks is executed although a directly manufactured component is assigned.
    Note that no scheduling of the overall network is executed for planned orders. For the components requirements dates are determined. In order to cover them, planned orders are created in the next MRP run. Since the requirements are not managed using the exact time, the results of the planned order scheduling and of a scheduling of the overall network of the converted collective order can differ.
    BR
    Caetano

  • Cumulation of lower level item prices to higher level items

    Hi,
    We have a specific requirement that we use high-level materials that is not relevant for pricing and lower level items connected to higher-level item that are RA and billing relevant. How do we modify the pricing procedure to cumulate (roll-up) the lower level items to higher level item which is not price relevant but statistical value should be updated at this level for billing purpose.
    We want to achieve this using/modifying only pricing procedure and not via user exit..
    Request SAP experts to provide some inputs to this issue..
    BR/Rajasekhar

    Hi rajsekhar
    But generally if you want to transfer the cost of the sub item to  main item then you can  check the box Cumulative cost in copy control VTFL . But your requirement is quite opposite .So you need to go to assign a New Reqt / Alt calc type  to the cond type , telling that the header item cost which is not relevant for pricing has to be transferred to sub item .So you need to integrate with the ABAP'er to give inputs to him and giving our requirement also
    Regards
    Srinath

  • "Low-level" authorizations for accessing BW reports - add users to role

    Using the advice in Topic "Low-level" authorizations for accessing BW reports, I have been able to publish a query to a role that has 3 test users and each user gets the same query but with different data, as determined in the tables.
    Is there a way to look up the users and e-mail addresses from a table and associate them to the role? We have several hundred e-mail recipients that will not need BW access, but only need an e-mail with a static report that contains data on their own territories.

    Hi!
    i think programatically it might be complex. You got to maintain a seperate variant of report per user and use this variant to send mail. that means you need to maintain a variant and a Broadcast setting per user. once maintained you can use it any number of times the values will be recalculated everytime.
    with regards
    ashwin
    <i>PS n: Assigning point to the helpful answers is the way of saying thanks in SDN.  you can assign points by clicking on the appropriate radio button displayed next to the answers for your question. yellow for 2, green for 6 points(2)and blue for 10 points and to close the question and marked as problem solved. closing the threads which has a solution will help the members to deal with open issues with out wasting time on problems which has a solution and also to the people who encounter the same porblem in future. This is just to give you information as you are a new user.</i>

  • Low-level logging

    Hi,
    When i login to apps via browser, i get the warning on the top
    Low-leve logging is currently enabled...
    My apps is not working properly. All requests are failing.
    What is the is low level loggin ? How to disable this ?

    try the following please (note 313848.1 and 364172.1)
    1. Login to E-Business as the user who can modify the Workflow System Administrator and navigate:
    Workflow Administrator Web Applications > Administration
    Then select either the SYSADMIN user or the Workflow Administrator Web Applications responsibility as the Workflow System Administrator.
    2. Select Workflow Administrator Web Applications > Workflow Manager > Notification Mailers > Launch Summary Notifications
    NOTE: We highly recommend that the Workflow System Administrator be assigned to the Workflow Administrator Web Applications responsibility. This allows the assignment of this responsibility with its administrator menu items to users within your organization that are responsible for administering workflow.
    or
    1) Log in as SYSADMIN
    2) Query the System Administrator responsibility for editing
    3) Add the Workflow Administrator Web Applications role to the Sys Admin Responsibility
    4) Observe the untitled attachment error and issue no longer presenting
    fadi
    http://oracle-magic.blogspot.com

  • Low-level code MRP

    Dear gurus,
    i find in the material master (MM02 and in the table MARA) the parameter "Low-level code" = 000 , how  use this parameter ?
    When this value is write?  At saving of Bom? Is a setup of customizing for value possible?
    Thanks a lot
    Daniele Pistilli
    PP TEAM

    Hi
          Pl go thru the following may be useful
    The lowest level that a material appears in any product structure of the
    company. The low-level code controls the sequence in which the material
    is planned in an MRP run: First the materials with low-level code 0 are
    planned, then the materials with low-level code 1, and so on. The lower
    the low-level code, the higher the number that is assigned to the
    material.
    The level that is set in the material master record represents the level
    at which the material will be planned. This means that the material will
    only be planned once all assemblies in which it occurs have been planned
    and exploded.
    The low-level code is set internally in the material master record when
    the BOM is maintained.
    When you create a bom item for a assemblyparts ,the item's low-level code will equal (assemblyparts's low-level code + 1),but if (assemblyparts's low-level code + 1) < bom item then the bom item's low-level code not changed
    Ram

  • SNP - Issue with PDS as source of supply in low-level code run

    Hi All:
    I have a bunch of PDS that is giving me the following message when the SNP Low-level code is run:
    ''Invalid source 00000010382991380SLT1 S is not considered for low-level code calculation.  The source of suppy 00000010382991380SLT1   S is available actively in the Supply Chain Model. The location product for which the source of supply is intended, does not exist, however, or is no longer assigned to the model. The source of supply is therefore invalid. ''
    I tried all of the following but still did not get to work
    1. Made sure that FG and all the active component of one FG and the location and the PDS were in an active model.
    2.  Made sure that there was one production version and hence one PDS
    3.  Intialiazed the Planning area with the version
    But still would not generate the low level code for the product location.  Can some one throw share some insight and help pl?
    Thanks
    Ryan

    Could you please check whether in the Product Master, Procurement tab, the Procurement Type is set as "P - external procurement planning"? If yes, then that's the reason as the Low-Level Code is only calculated for Products that are to be planned in APO. In this case, change procurement type to X or E and it should work.
    Regards,
    Tiago

  • DMR Not showing materials of Lower level WBS

    Hi,
    I have multiple WBS under 1st level. It is working find with cost reporting. But when i create DMR with DP91, it shows materials attached with activity comes under 1st level WBS only. How can i bring materials of lower level WBS activity materials into DRM while triggering DP91 with Upper level WBS...?

    Hi rajsekhar
    But generally if you want to transfer the cost of the sub item to  main item then you can  check the box Cumulative cost in copy control VTFL . But your requirement is quite opposite .So you need to go to assign a New Reqt / Alt calc type  to the cond type , telling that the header item cost which is not relevant for pricing has to be transferred to sub item .So you need to integrate with the ABAP'er to give inputs to him and giving our requirement also
    Regards
    Srinath

  • Error while Assigning database level role (db_datareader) to SQL login (Domain Account)

    Team,
    I got an error while creating a User for Domain Account. Below is the screen shot of the error (error : 15401)
    Database instance is on SQL 2000 SP3. ( I know it is out of support, But the customer is relutanct to upgrade)
    On Google search, i found below article which is best matching for this error
    http://support.microsoft.com/kb/324321
    I have follows each step of troubleshooting. But still the issue persists.
    Step 1. The login does not exist == The login is very much exist in the domain as i am able to add the same domain id to other database instances
    Step 2. Duplicate security identifiers == i have used this query to find duplicate SID
    /*  SELECT name FROM syslogins WHERE sid = SUSER_SID ('YourDomain\YourLogin') */
    But there was only one row returned with create date of today's.
    Error while Assigning database level role (db_datareader) to SQL login (Domain Account) 
    Step 3. Authentication failure == Domain is available. User is able to login on other servers via RDP connection.
    Step 4. Case sensitivity == Database collation is set to Case insensitivity. (CI)
    Other two 5. Local Accounts & 6. Name resolution == is not applicable to me.
    I tried other ways also.
    A. Creating login and providing permission in one go only = User account is not created
    B. Instead of GUI, use query to create login and provide required permission = Same error.
    Does anybody has faced any such situation
    Chetan

    See the below output
    srvid
    sid
    xstatus
    xdate1
    xdate2
    name
    password
    dbid
    language
    isrpcinmap
    ishqoutmap
    selfoutmap
    NULL
    0x010500000000000515000000A1F66E1BFC1DC75D26E72530A2B80400
    14
    20:25.9
    57:33.4
    UKBAA\LHRAPPMuttavarapuS
    NULL
    1
    us_english
    0
    0
    0
    Chetan

  • Question about CHKDSK ,S.M.A.R.T and low level format

    hi,
    I like to know the difference     exactly  between CHKDSK and S.M.A.R.T and low level format program(I know that  low level format  writes zero"s) I mean besides the low level format writes  zero's what onother
    benefits it  has , it repairs some bad sectors or mark bad sectors ect?
    very short explanation wil be enough.
    thanks
    johan
    h.david

    H.david
    1-CHKDSK http://en.wikipedia.org/wiki/CHKDSK  CHKDSK verifies the
    file system integrity on
    hard disks or
    floppy disk and fixes logical file system errors.
    2-S.M.A.R.T http://en.wikipedia.org/wiki/S.M.A.R.T.  smart is a monitoring system for
    computer
    hard disk drives (HDDs) and
    solid-state drives (SSDs)<sup class="reference" id="cite_ref-1">[1]</sup> to detect and report on various indicators of reliability, in the hope of anticipating failures.
    3-Low level formatting  http://en.wikipedia.org/wiki/Low_level_format
    Wanikiya and Dyami--Team Zigzag

  • Unable to create a folder in lower levels of root folder

    It appears to me I cannot create a new folder in the lower levels of root folder. Currently, I have to create a new folder right below root folder and then drag it to lower level folder. Why I can't do it in one go. Thanks!

    Hi Ray. That is normal behavior for Snow Leopard now. The OS wants to reserve the root level for itself. Also, folders you create at the root level may not accurately reflect the correct permissions.
    You want to try to keep all your files/folders in your Home (User) folder. That way all your documents remain portable when you move to another Mac or migrate your data back after an Erase & Install. If your docs are scattered all over the drive there is a chance some stuff will not get transferred during a move. So try to keep everything inside your Home folder.
    If you have to place a new folder at the root level, try creating the folder on your Desktop, then dragging it to the root level.
    And Welcome to the Macintosh!
    You might find the following links helpful:
    http://www.apple.com/support/switch101/
    http://www.apple.com/support/mac101/
    Cheers!

  • Issue in determining Low level codes

    Hi Gurus,
    We are having an issue running heuristics when running  along with Temporary low level codes. We are in SCM 7.0 environment.
    The SNP Heuristics jobs are failing with this message "Low-level code
    not available for product XXXXXXX at location XXXX
    Job cancelled after system exception ERROR_MESSAGE"
    Also, the message in the job log  for the product in was flagged for deletion and I am not too sure why is this being picked up for processing and then failing?
    I tried using SDP relevance as '1' for the product flagged for deletion for testing purposes and then the program is not considering this SKU, but stopping at another SKU and also that SKU is flagged for deletion. But the flip side of using SDP relevance is that that setting is at global level andmay have issues where the SKU is active.
    I have couple questions:
    1) Is there a way for the program to skip the code which has an error and move forward instead of failing the job? and provide a spool with error codes.Also, to provide the LLC number for all the correct SKU's instead of failing at that point and not generating the LLC's?
    2) Why is the program also considering the codes which are flagged for deletion which should not be the case?
    Also, I tried another way of maintaining the codes in thevariant which are not flagged for deletion and tried running heuristics in the background but failed at a point and it gave a message stating Low-level code not available for product XXXXXXX at location XXXX,     Job cancelled after system exception ERROR_MESSAGE
    But the product which was displayed in the job log is an active SKU. I am not too sure why the job failed with this error?
    I tried running that individual SKU in the background including the temporary determination of LLC, it was successful. I am not too sure why it failed when it was a part of selection?
    Any suggestions, would really help us a lot.
    Thanks and regards,
    Murali

    Hi Datta - Thanks for the replies. I was able to have a workaround by using selection profiles excluding the Procurement type 'P' and it worked.
    At our client, whenever a product is made 'non-X0'  in ECC, procurement type is set to 'P' and by excluding that piece in the variant I was able to continue with my processing.
    But still, don't you think the products which are flagged for deletion shouldn't be picked up heuristics?
    Thanks and regards,
    Murali

  • Difference between Low level and Normal IMAQ ?

    There are two options in IMAQ palette a low level and a normal one. Both have the same function names and the same icons the only difference being the balck and white icon of low level functions and colored icons of the normal functions. What is the difference between these two and what is the need of making a low level palette of functions ?
    Regards
    Asad Tirmizi
    Design Engineer
    Institute of Avionics and Aeronautics
    " Its never too late to be, what u want to be"
    Using LabVIEW 8.2

    Low level imaq functions gives you relatively more function to control the hardware. Buffer functions is one which is not there on the high level palatte

  • How to disable Wifi and Network access in low level setting for security ?

    Hi
    New to here
    One of our final customer bought imac last months. OS 10.9, SN is c02*******J4i
    Since they are security printing, all the necessary ports accessing to outisdes need to be disabled in low level setting(not the ons just like turn on and off ).
    The ports including USB storage, Network and WIFI.
    I googled and found the following
    Open the /System/Library/Extensions folder.
    To remove support for USB mass storage devices, drag the following file to the Trash: IOUSBMassStorageClass.kext
    Open Terminal and enter the following command: $ sudo touch /System/Library/Extensions The touch command changes the modified date of the /System/Library/Extensions folder. When the folder has a new modified date, the Extension cache files (located in /System/Library/) are deleted and rebuilt by Mac OS X.
    Choose Finder > Secure Empty Trash to delete the file.
    Restart the system.
    I want to confirm this before sending to final user. Since I didn't have mac on hand, just wonder whether there are similar kext files for network and wifi to remove.
    Just like step 2 described.
    I would like customer to backup these files before permanently removed.
    Many thanks
    Kevin
    <Edited By Host>

    chiqui wrote:
    Is it possible to disable Internet access point and WAP as when I use WiFi some connections to WAP server of my provider are still made and I get charged. I am looking for the option not to delete it entirely from the access point list, but rather disable it as I might need connection when WiFi is not available and I want to be able to enable it as once I delete the server name and setting I won't know it.
    Is it possible to do it and how?
    You could delete WAP accesspoint. Not all providers (carriers) allow this.
    ‡Thank you for hitting the Blue/Green Star button‡
    N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

Maybe you are looking for