Assigning system to package

Hi all,
I have imported MSS package in my EP6.0 system.
I have created one system using dedicated server template for R3. Created alias and done user mapping. In system test connection I am able to connect to the system.
The problem is when I open the My staff page it says could not connect to R3 system. The error says could not connect to sap system SAP_r3_humanresources. This is not the alias that I have created. I have created STB as the alias I want to use.
How do I assign this system to the package.
Please guide me.
Thanks and regards,
Afroz

Hi Afroz
the u can't find any iview for ESS which has assigned system SAP_R3_HumanResource
but look at  ur JCO connection for webdynpro application.
SAP_R3_HumanResource is the name for JCO connection which is used for SAP_R3_HumanResource application data
there other JCO connection for Application data.
SAP_R3_Financials
SAP_R3_Travel
so u have to define this as alias for system for using Travel management from ESS.
regards,
kaushal

Similar Messages

  • Function module was assigned to 4tmp package

    Hello all,
    I have created XML-DataSource with SOAP Connection in our BW development system.
    In this regard the system created a function module to receive data via XI. This function modul was assigned to the package $tmp and it is not possible to transport this FM into production system.
    When I try to re-assign the package to our designated develop package an error message appears, which says I have to use a package which starts with /BI0/.
    Any idea how can I transport this function module. That would be great.
    Thanks upfront and Best regards,
    Stefanos from Munich/Germany

    hi Stefanos,
    try to transport the datasource/infosource to target system and check if the function module is generated there.
    hope this helps.

  • OXK3 Assign a different package to the object

    Dear all,
      I trired to create a field in OXK3, but the system returns:
    "Assign a different package to the object
    Message no. TK810"
    I have already tested with different package but it still not correct.
    Regards,
    Kit

    Hi Kit,
    Take a look at [Note 761040|https://service.sap.com/sap/support/notes/761040] to see if the solution offered by SAP for this situation will work in your case.  Here is an excerpt from the Note's solution section:
    First, check whether you have selected the correct development class for the table append structure and whether the transport routes are configured correctly in the Transport Management System.
    The table append structure must belong to a development class which is at least transported to all target systems to which the relevant table is transported.
    Best Regards,
    Jamie

  • Trashed System pref "package contents" by accident

    I was cleaning up my computer and by accident i moved system preferences "package contents" folder to the trash.
    Now being frantic from realizing what i did, i moved the contents folder then to my application folder.
    now of course my system preferences are not loading.
    what can i dO???

    Hi Lili2
    I guessing that you mean the system preferences application in the applications folder, right?
    You did a ctrl-click on it & chose 'Show Package Contents' , right?
    Then you mistakenly trashed the 'contents' folder ?
    If Yes to all that..... did you out the Contents folder back inside the system preferences application.... or just into the Applications folder ?
    I'd say it's just sitting in the Applications folder.
    So
    ctrl-click on the System Preferences application icon & choose 'Show Package Contents'.
    Now move the Contents folder that you trashed/recovered into the window that just opened & close that window.
    Now try to load your system prefs.
    let us know how you get on.

  • Customer Object PROG can be assigned to which package?

    i am a new guy in abap ,it's my first program,in it's attribute ,when i choose a package ,it pop-up error info-"Customer Object PROG cannot be assigned to package ***"
    who can help me?
    Customer Object PROG can be assigned to which package?
    tks in advanced !

    in da field for package, write Z* or write Y* and take F4.
    from da list u get, choose an appropriate package.
    Customer objects can be palced in customer packages( namespace Y or Z).
    if u dont get any package beginining wit Y or Z u'll have to create a package using tcode SE80.
    plz reward points if dis helps

  • About system defiened packages

    Hi,
    how can i check for system defiened packages in oracle.
    Is there any table or any.
    Like user_tab,user_source etc.
    please tell me.
    regards,
    siddam

    select object_name, object_type from dba_objects where object_type like 'PACKAGE%' and owner= 'SYS';

  • Assignment of Maintenance Package to Inspection Plan operation

    Hi All,
    For Stability Study I have created Inspeciton Plan and now I need to assign Maintenance Package to Operation. Please help in assiging Maintenance Strategy/Maintenance package to Inspection Plan operations.
    Thanks in advance.
    Regards,
    Devang

    Hi Luke,
    I was able to assign Maintenance Strategy and corresponding package to operation. Thanks for your help.
    But now I am stuck with some other issue. I have completed initial testing, then scheduling as well as result recording against scheduled inspection lots. But when I check "Display Stability History", I am getting tab for Initial Test along with one tab for each assigned conditions. But here issue is, under Intial Test tab I can see all characteristics results while for under other tabs (condition tabs) system shows only first characteristic result. Here please note that I have used same Inspection Plan and even result racorded and valution done (all accepted) is same for intial inspection lot as well as scheduled inspection lots for conditions.
    I am unable to understand why system is showing All Characteristics results under Initial Test tab but only first characteristic is shown under Condition tabs.
    Hope you can help me with this as well.
    Thanks and regards,
    Devang

  • System settings Package management part crashes on open

    Hello all,
    Whenever I open the system settings and then go to "package management" EVERY TIME the screen shows up and inmediatly closes and I get a KDE crash handler window.
    Please note I am using KDEmod repos.
    If I hover over the Package Management icon I get that it contains 2 items, which are "Aqpm global configuration" and "Aqpm databases configuration"
    No idea of what could be happening, I checked and the package kdemod-aqpm is installed
    Any more info you need just ask I will be around.
    cheers

    There'sa forum for kdemod here - you might get a quicker/better answer there.

  • Which jar files for pcm.system.ISystems package?

    Hi ,
    Which jar files are needed for the packages:
    com.sap.portal.pcm.system.ISystems
    com.sap.portal.pcm.system.ISystem
    and under which path I coul dfind them.
    Thnx
    Regards
    Meesum.

    Hi Meesum
    just install WinRAR (yeah, get a licence, it's worth), point the dir to .../irj/root/WEB-INF/portal/portalapps and search for ISystem*.class - and you're done.
    This time I have done it for you:
    Application com.sap.portal.ivs.api_landscape/lib/com.sap.portal.ivs.api_landscapeapi.jar
    Hope it helps
    Detlev

  • CUA with HR-Org - How to assign systems for role

    Dear all,
    we are planning to use CUA with HR-Org assignment. Can please anyone explain to me how or where the system for the role comes from.
    I mean, normaly in SU01 -> Role Assignment I have in the first colum the system and in the second colum the role. It the role assigment come from HR-ORG there is always the local logical system in the system colum. This is not what we want.
    CUA is on Solution Manager, HR-ORG is replicated from R/3 HR Systeme and the user needs the roles in ECC production systeme.
    So how can we manage the system/role combination assignment?
    Thanks for any hints.
    Best regards
    Roman

    Hi,
    If I understand your problem you want to do role assignment from the HR-Org structure on a system that is using CUA.
    I have only managed this successfully when the CUA master is also the system with the HR-Org structure on it. Otherwise you have lots of issues with replicating data between systems. I did this for a UK council's SAP solution where we allocated all the roles from the HR system, including roles on ECC, SRM(EBP), CRM and BI - so it does work.
    PO13 on the system with the org. structure will only allow you to allocate a role that exists on that system, but if the roles that you are allocating are composite roles that include single roles on other systems, you can achieve this sort of business role allocation without having to go the IdM route.
    Darren Hague (no relation) gave a presentation at SAP Tech Ed 07 on such a scenario, that explains how the composites would be set up far better than I can, but in essence you use the CUA connectivity and the rights of the CUA master system (which includes the org. structure) to allocate roles on other systems / clients in your CUA landscape.
    Have a search through SAP Tech Ed 07 presentations and you should find what you are looking for.

  • Can't assign system to logical component

    Hello everybody,
    I try to configure my Maintenance Optimizer. I have created a system with main instance SAP ECC Server. In view Landscape components i can see my system in node systems->sap erp. When i try to assign a Logical component SAP ECC an a massage "Logical component SAP ECC cannot be assigned to this main instance" is displayed and component is not assigned.
    What have I wrong made? What should I check/configure?
    Regards
    Bogdan

    If you go to help.sap.com and SOlution Manager and look for the assign logical components menu item you will find instructions on this. Basically from SMSY click on the system then on top left menu tree select "Other Objects"
    when the popup comes up enter the system id in the "System field"
    Then at the bottom of that popup you should see an icon like to pieces of paper called"Intalled product versions" click on that and you get another popup to show products installed on the box. If it is not listed in the bottom , you can use the top section to select the product using free product selection , then you should see this error disappear as you have identified the main instance it is talking about and furthermore you should be able to then assign it to a logical component

  • Account assignment category for Packaging mterial

    When I create purchase order for a packaging materials , it is asking for a account assignment category. We dont want to create accounting documents as well as we dont want to use account assignment category. Is there any way to suppress the error message - account assignment mantory for material type?

    Hi,
    For Packing materials which material type you used. I think you have created in Non stock materials/Non Valuated Materials material type.
    If you use NLAG material type then you need to enter the A/c assignment category.
    So always for Packing Materials you should use VERP Material type. As Packing materials are Inventory items so you don't need to enter the Account assignment category in PO.
    Hope you got it.
    rgds
    Chidanand

  • Assigning System Alias to an iView

    Hi all
      I have a System "mySystem" and alias as "myAlias".
      How do i assign my Alias (myAlais) to an iView(salesOrder) ???
    Thanks
    Kay

    if this is a custom iview, you can create a propertie in the "portalapp.xml"
      <components>
        <component name="myIview">
          <component-config>
          </component-config>
          <component-profile>
            <property name="systemAlias" value="myAlias"/>       
    then in the code for the IView, you can ask for the alias
    systemAlias = aRequest.getComponentContext()
                 .getProfile().getProperty("systemAlias");
    and use it to get a connection using JCA
    This allows to set a default alias, and  later to change it in the properties of the iview.
    regards
    Guillaume PATRY

  • [SOLVED] Would "pacman -S foo" fail if system's package list is old?

    I'm new to Arch and want to understand my system as much as possible.
    In several places in the wiki it is recommended to install a single package with "pacman -S foo" instead of "pacman -Sy foo" unless I'm doing a system upgrade at the same time, so that versions of foo and its dependencies are in sync with all the other packages on my system. This seems to be good advice and I follow it.
    However, I recently read that the Arch repos only have the latest version of any given package. Now I'm confused. So what happens if the versions of foo and its dependencies on my package masterlist are outdated? Would "pacman -S foo" fail? If not, how can it possibly work if pacman is trying to install package versions that are no longer in the repository?
    Last edited by bdantas (2014-06-18 12:34:01)

    To be safest, always use `pacman -Syu <newpackage>`.
    I generally use `pacman -S <newpackage>` which is a bit quicker - and this is fine if you update frequently.  I do a `-Syu` at least once a day.
    Never ever do a `pacman -Sy <newpackage>`.  This can lead to severe breakage and potentially a completely unbootable system.  In fact never do `pacman -Sy` in any way unless there is also a 'u' there (i.e. "-Syu").  I think a feature request for pacman could be made to have a prompt when such a command is entered "Are you an idiot?[Y/n]  Do you want pacman to destroy your system? [Y/n]".
    In contrast, `pacman -S <newpackage>` should never do any damage.  If your package database is still current, it will work fine.  If you package database is too old, it will exit with an error message without making any changes to your system.  The error message is along the lines of the package/file not being found in the repos or on the server(s).
    EDIT: as this is already well covered in the wiki this may be best suited to the NC.

  • Assigning System Administrator role to a new user in OIM 11gR2

    I am trying to assign full access as xelsysadm to a newly created user but not able to. Unable to identify option to add System Administrator role. System Administrator admin role is available to TOP organization and we can not create a new user in TOP. any suggestion will be helpful.

    goto-> organization-> search and select Top organization-> open detail page-> click on Admin Role-> select Adminrole(System Administrator) -> click on Assign button-> select user and add it-> finally click on okay.

Maybe you are looking for