Can't assign system to logical component

Hello everybody,
I try to configure my Maintenance Optimizer. I have created a system with main instance SAP ECC Server. In view Landscape components i can see my system in node systems->sap erp. When i try to assign a Logical component SAP ECC an a massage "Logical component SAP ECC cannot be assigned to this main instance" is displayed and component is not assigned.
What have I wrong made? What should I check/configure?
Regards
Bogdan

If you go to help.sap.com and SOlution Manager and look for the assign logical components menu item you will find instructions on this. Basically from SMSY click on the system then on top left menu tree select "Other Objects"
when the popup comes up enter the system id in the "System field"
Then at the bottom of that popup you should see an icon like to pieces of paper called"Intalled product versions" click on that and you get another popup to show products installed on the box. If it is not listed in the bottom , you can use the top section to select the product using free product selection , then you should see this error disappear as you have identified the main instance it is talking about and furthermore you should be able to then assign it to a logical component

Similar Messages

  • XI 3.0 and BW 3.5 system type/logical component in Solution Manager

    We are in the process of performing an upgrade for ERP 2004, XI 3.0 and BW 3.5. Initially this is being done in the sandpits. All systems are configured and connected our Solution Manager to download the packages.
    We are unable to determine what type of system the XI 3.0 and BW 3.5 should be configured under. For example, previously we had an issue where ERP was configured as ECC 5.0 rather than ERP 2004. This was causing an issue in MOPZ where the upgrade option wasn't visible in a maintenance transaction. The same issue is now happening for XI and BW.
    Please advise on the system type (logical component to use) for XI 3.0 and BW 3.5 in Solution Manager as SAP have made it very confusing. Currently both are under type Netweaver 04.
    Regards,
    -Rohan

    Hi
    I believe that SAP hasn't upgrade option for BW 3.5, Check link:
    https://service.sap.com/solman-mopz
    Upgrade
    a "straight" upgrade for SAP Business Suite (upgrade from SAP ERP 2004 to SAP ERP 6.0, for example) is not supported by Maintenance Optimizer
    Upgrade with an Installation of an Enhancement Package is supported for SAP ERP, SAP SCM, SAP SRM and SAP CRM
    Regards
    William Neira

  • Which SAP Product version to assign to a Logical Component in SMSY (SOLMAN)

    Dear SAP Colleagues,
    In our SAP environment, we do have 2 versions of ERP systems :
    1. CON - SIF - CDP systems are 'SAP ERP Central Component 5.0' product version.
    2. CDD - CDT - CDP systems are 'SAP ECC 6.0' product version.
    Question :
    When I want to assign these systems to a Z_LOGICAL_COMPONENTS, which product version do I have to choose ?
    Example for CON - SIF - CDP systems :
    1. They are 'SAP ERP Central Component 5.0' product version.
    2. In SMSY in our SOLMAN system, logical component are created using
        'SAP ECC 5.0' product version.
    Example for CDD - CDT - CDP systems :
    1. They are 'SAP ECC 6.0' product version.
    2. In SMSY in our SOLMAN system, logical component are created using
       'SAP ECC 6.0' product version.
    Question :
    What about 'SAP ERP 2004' and 'SAP ERP 6.0' product version ?
    In which case must I use this product version to assign CON-SIF-CPS
    or CDD-CDT-CDP to new Logical components ?
    Are they OSS Note or any matrix which give me the right product version to choose ?
    I have heard that 'SAP ECC x.x' product version should not used any longer ?
    Thanks
    Best regards
    P.C

    Hi,
    Read the following document, the mapping for systems and component versions is described in here:
    https://websmp202.sap-ag.de/~sapdownload/011000358700000074392009E/SP18_SolMan_Setup_Guide_V2.pdf
    For ECC 6.0 you should select ERP 6.0
    regards,
    Jaap

  • How can we assign system fields like sy-datum, sy-uzeit to the ztable field

    hi experts,
    i have created one ztable inthis one it has some fields like date changed , time changed... in this table when the user enters the data it automatically updates time and date... for this where i have to assign those fields and code pls....

    Hi Gopal,
    Make use of the events in Table maintenance generator,
    Generate a Table maintenance genrator and in TMG make use of the events
    Link to create the events
    http://www.goodpeople.co.in/jobseeker/JobDetailPage.aspx?postjobid=43001
    select the table maintenance event maintenance dialog as 05
    in the event between form and endform write the following code
    field1 = sy-uname.
    field2 = sy-uzeit
    field3 = sy-datum.
    regards
    prasanth

  • Logical Component Assignment : Use '_' as a separator

    Hi experts,
    I can not assign a system to a logical component in SMSY.
    I tried to assign an SRM 7 system to logical component : "SAP SRM EBP-SRM SERVER" and then I get error message : "Use '_' as a separator".
    Any idea to sort this out?
    Where could I manage logical component name?
    Many thanks in advance.

    Hello there,
    Does the logical component you mention have any systems already assigned? I would guess that it doesn't and that it is one of the logical components already present when Solution Manager is installed.
    Have you tried creating a new logical component?
    Best regards,
    Miguel Ariñ

  • Error in Solar02 " Error - No system found for component SAP LEARNING.....

    Hi,
    I have selected the Business repository from the Tcode Solar01c, and i can see the list of configuration under Business Scenario,
    when i am trying to execute any Tcode,(My understanding is that this Tcode must execute in Development system) it gives the following Error,
    " No system Found for Component SAP Learning Solution and Role Evaluation system in project ZPROJ.
    In SMSY i have created Two systems Dev :100 and Qas:300  Which are assigned to one logical component whose producted Version in SAP ERP.
    Please advise by reviewing above scenario.
    Regards,
    SM

    Hi Irfanl,
    I've had the same issue with regards to getting the error below when assigning transactions to a Blueprint business process.
    "No system found for component and Evaluation system in the Project"
    But I think I have solved it and seems pretty simple to change the system role from Evaluation System to any other that is relevant in your landscape.
    Go to transaction SOLAR01 > Click on the first level of the Project Name (Under Business Blueprint Structure) to select the Project.
    Click Business Blueprint in the Menu > System Role > Choose the relevant System Role (in my case Development)
    Click Copy
    This should replicate to all nodes and then you should be able to assign transaction to the business processes.
    Quite strange and seems simple, I checked the Solution Directory, Solar Project Admin etc etc but couldn't find the solution until this which should work.
    If not, there is a similar work around which also works.
    Go to transaction SOLAR_PROJECT_ADMIN
    System Landsacpe Tab
    Systems subtab
    Click System Role Assignment
    Remove the Evaluation System (or all those not relevant to your Project and Logical Components)
    Save Project
    Go to SOLAR01 and it should reflect it in the Blueprint.
    You can always go back to this and add the System Roles you removed and the Blueprint will reference the correct Role.
    Hope this helps,
    -Rohan

  • Solution Manager - Logical Component for SAP Netweaver EHP2

    Hello,
    I installed the newest SAP Netweaver Ehp2 (with usage type AS ABAP only) for a future integrating with BI_CONT (SAP BI requirement). So... what I want to know is... I want to do an update of support packages to the latest Stack (SPS) and in this product version (NW EHP2) the latest stack is stack 06 !! But I ´m facing with a problem which is, because I have to maintain this system in Solution Manager (for Maintenance Optimizer activity)...so what I want is configure this new system on Solution Manager Ehp1 (with SPS 23) but in tcode SMSY I didn´t found this Product in Logical Components for I can apply this system to my Solution... I only see SAP Netweaver with EHP1 and not with EHP2 which is the version that I want to apply this new system. (This is mandatory task, because without it, I will not be able to download the support packages for NW 7.0 EHP2)
    Tell me two things... first if this level version of Solution Manager that I have here (SPS 23) have this product in logical components, and two... if not it, is necessary to raise the level of Solution Manager support packages (to latest stack SPS 25) for I can see that logical component SAP Netweaver EHP2?!
    Thank you very much
    João Dimas - Portugal

    Hi João,
    You can verify if the EHP2 is available (if) in your system, this can be done once you are in SMSY -> Product Definitions -> SAP Netweaver where you should able to see the EHP2. If so, then it's a matter of marking the leading Product & Product Version under the Header Data ->Change Product Assignment where you can use the drop down arrow to select the Product and Product Version. If it's not available, then by checking the 'Free Product / Select Product Version' then use the drop down arrow to select the product & Product Version, once you selected that then click on copy and mark that as active and save.
    Then you need to create a new logical component in System Group & logical Component under SAP Netweaver, then assign the system to the logical component. Once this is done you can use the logical component in a solution and create a maintenance transaction.
    I hope this help you to proceed further, thanks.
    Jay Soma.

  • Creating Logical Component in Solman 7.1

    Hi,
    I want to create a Logical component for my SAP ECC managed system, could you please let me knowhow to create it.
    OR is there any standard SAP document available on how to create Logical component in Solman 7.1 SP10.
    Regards
    P Kumar

    hI kUMAR,
    Check in SOLMAN 7.1 master guide which is available in SAP marketplace.
    You can try below for creating logical component in SOLMAN:
    1)Make sure that managed system has correct details in LMDB (like product components,version...etc)
    2)Go to SMSY-->click on logical components in left hand side-->search for your product version i.e ERP 6.0 or Netweaver 7.0 or SCM etc.
    3)Expand ERP 6.0 (in ur case)-->right click -->create logical system-->Give logical system name and version details-->Save
    4)After that select systems i.e Dev system ,QUA system,PROD system of your ECC ,Then save
    Thanks,
    Prakash

  • Replace logical component in solar01

    Hi,
    We have an issue with Logical component maintained in "transaction"  tab for business process under Project in solar01.
    Logical components for ERP systems have been changed from SAP ECC to SAP ERP. All ERP systems are now maintained in SAP ERP and corresponding Logical component. But the business processes mainatained refer logical component SAP ECC.
    We tried to replace and delete the logical components in solar_project_admin -> System Landscape but it does not allow to delete neither replace with new SAP ERP logical components.
    Get message "Logical component SAP ECC is still being used"
    Please help on solution.
    Thanks & Regards,
    Anthony.

    Thanks for reply.
    actually we tried to add new SAP ERP logical component and updated in the project.
    When we try to use Logical Component replace function we get below message :
    "The logical components SAP ECC and Z_ERP have different products"
    So the logical component in "transaction" tab still cannot be replaced.
    Moreover in few business process it does not list Z_ERP logical component to manually replace same in Logical component dropdown.
    we found one SAP note :
    SAP Note 1429697 - SMSY: Converting product versions
    this SAP note refers to a report SMSY_SWITCH_PRODUCT which can be used to switch logical componment SAP ECC to SAP ERP.
    But SAP ECC is used in atleast 15 more projects so need to know impact of running this report.,
    Thanks & Regards,
    Anthony

  • Managing more than one logical component in SMSY Current System Assignments

    Hi,
    I have a problem with managing logical components in TA SMSY in my Solution Manager System, in the section "System Groups and logical Components". I want to maintain more than one logical System e. g. from Type Application Server ABAP --> SAP NETWEAVER APPLICATION SERV.
    That means e. g. i want to maintain 2 or more Demo Systems from different Servers or Instances of the same Product Version in the same logical Component .
    What I want to know is, is there a way to display these logical components in tne  "Current System Assignments" - View in that form
    Logical Component is e.g. : SAP NETWEAVER APPLICATION SERV
    product/main instance is   : SAP NETWEAVER [Application Server ABAP]
    Product Version | Development System | Demo System | Training System | Production System | ...
    |--|||--
    |
    SAP NW 7.0        |                                         | ZB1: 100           |                               |                                     |
    |--|||--
    |
    SAP NW 7.0        |                                         | ZB2: 800           |                               |                                     | ...
    Thanks beforehand for your help.
    Greets C. Peifer
    Edited by: Carsten Peifer on Dec 15, 2008 4:03 PM

    Thanks for your quick answer,
    but i have to say, that this is not exactly what i've been lookin for.
    What I need in my System Landscape is to have each demosystem as a logical Component from the same type (e.g. SAP NETWEAVER APPLICATION SERVER ABAP).
    So that in Change Management in a Maintenance Optimizer Transaction i can choose between each demo system in my System Landscape (from the type SAP Netweaver Application Server ABAP) that i will maintain in Maintenance Optimizer, e.g. download a new SP Stack.
    My Intention is to create new logical components from type  SAP NETWEAVER APPLICATION SERVER ABAP in my Namespace e.g. ZSAPNW01, ZSAPNW02, ... and to maintain the types of systems (Demo, Development, Training etc ...) for each logical component.
    Is this the only Possibility?
    Or do i can also display my logical components the way i descriped beyond?
    >
    Product Version | Development System | Demo System | Training System | Production System | ...
    |--|||--
    |
    SAP NW 7.0 | | ZB1: 100 | | |
    |--|||--
    |
    SAP NW 7.0 | | ZB2: 800 | | | ...  

  • Assign ECC logical component

    I have a problem to assign logical component to my ECC system in t-code SMSY.
    Every other system works fine...
    Please help me with some new things to try!

    1. I open the assign logical component wizard
    2. for my SAP ECC Server I browse for a logical component
    3. Then I select SAP ECC and press ok
    And then the error pop-up:
    Logical component SAP ECC cannot be assigned to this main instance.
    /Micke

  • Logical Component for HANA DB system

    Hi Friends,
    I am doing Managed System Configuration for HANA DB system.
    I have created Logical Component for the same, but I am unable to put it in Solution(in SMSY).
    Can some one suggest.
    Thanks & Regards,
    Solman Starter

    Hi,
    What is the error you are getting ?
    What your solution manger version and SP level ?
    Check below note and see if they help.
    1958910 - EarlyWatch Alert For HANA Database
    Regards

  • Logical component can not be set to &&

    Hi
    I will create a new Business Process.
    If I set the name of Business Step and the name of Logical Componets appaers the following message ..
    Logical component can not be set to /NSN/PROJECT VIEW
    Message no. SOLAR_EN204
    Diagnosis
    The parent business process of the current process step is 'production', therefore you can not set logical component to  /NSN/PROJECT VIEW, which is without logical system in the leading role.
    System Response
    You can not set the logical component /NSN/PROJECT VIEW
    Who has a solution for me ??
    Thanks for your help  )

    The only way I can see it working is if the direct-to-field mapping is writable and the 1:1 is set as read-only since otherwise, if the OBB reference is null, it means the objects PK is null. I'm not sure how it was even queried with a null OBB as it means its OBA.id is null as well. This worked in 904 as it did not correctly validate PKs in the uow - this was fixed through bug 4569755. If you feel this should not have been changed, please file it with support and the fix can be revised.
    The way I have mapped this in the past is that tab1 and tab2 are linked using the pks have same name option in the workbench (this makes tab2.id dependent on tab1.id). The OBA object then would have an id attribute that would represent the tab1.id and be writable, and if required, a 1:1 representing the OBB reference that was read only - allowing the OBB reference to be null if OBA entries can exist independently.
    Best Regards,
    Chris

  • SMSY//Logical component definition - multiple roles for one system?

    Dear all,
    as our client has a divided system landscape (three-tier operational line as well as two-tier development line) some systems have more than one role to fill. The development system on development line is source system for all developments, as well as post-processing system for retrofit purpose from operational line. The maintenance system on operational line is target system for developments from development line, as well as source system for maintenance activities on operational line.
    --> What are the consequences of assigning multiple roles to one system?
    --> Is there anonther option than assigning multiple roles?
    Best regards
    Nick

    We have Event Manger 7.0 installed into a stand-alone SCM 7.0 system. When trying to set this up in SMSY, the only options given for setting up the Logical System is to associate with with EHP3 or EHP4 for in ECC 6.0.
    Obviously we have not installed EM into ECC. So where are the other appropriate entries in SMSY for recognizing that EM is installed in SCM?
    1) This system must be maintained as SCM 7.0 in SMSY and not as SAP ERP 6.0 or EHPX for SAP ERP 6.0, this is the reason as you can see this system SCM 7.0 can be assigned just to SAP ERP 6.0 or EHPX for SAP ERP 6.0.
    2) There's no Main Instance available to be selected when you have a SAP SCM 7.0. You must select one or more of the following main instances below.
    BI Content
    SCM Server
    cFolders on SCM Server
    GEOCODING
    Portal Content
    SAP LiveCache
    SAP NW - Adobe Docu. Service
    SCM Optimizer
    SCM WCL
    XI Content
    These are the main instances available to SCM 7.0

  • Can One Business system have two technical systems assigned to it

    Can One Business system have two technical systems assigned to it

    hi,
    the technical system describes the physical view and the business system the logical view, respectively.
    So in most cases you must define both but while a technical system can only link to one WEB AS, more than one business systems can link to the same technical system.
    But one Business System can have only one technical system.
    Logical system for senders and receivers in XI can be defined as business systems which is associated with technical systems. You may req to create BS for identifying individual senders and recievers. Technical system is gateway having the technical details and it is in the ID we designate it to be either a sender or a receiver.
    Follow the link below to learn moer on it:
    http://help.sap.com/saphelp_nw04/helpdata/en/97/9d84494b9f45caabe0713296d89b72/content.htm
    Regards
    Mamta
    Edited by: Mamta Yadav on Sep 12, 2008 11:13 AM

Maybe you are looking for