Assigning Territory Attribtues Using Rule Builder

Hi ,
I am not able to assing the Territory Attributes using the Rule Builder.
1. I have create the Rule Policy and Rule set in the Rule Builder.
2. Under the territory I assigned myself as employee and I have created a Rule saying that 'if the Account Hierarchy is X then the Terriotry is X'
3. I go to the Trade Promotion applicaton.
i. I search for the Account hierarchy, the Terrioty is defaulted but no Account Hierarchies are found Under that.
ii. when I search for all the available account Hierarhcies and assign the one that I used in the rule I get a warning '' Account Hierarchy X is not assigned to Territory X "
What additional steps am I missing . Is it possible to assign Territory attributes using rule builder. Is there any other way of doing it.
Thank you,
Siva

HI,
You need to run a program to update the territory relationships/chnages..
you can search for it in se38 -- terrProcrel..
rgds,
Venkat

Similar Messages

Agent assignment in Workflows using Rules.

what is Agent assignment in Workflows using Rules.

Hi
[Check this article|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/70c6c6e7-3ede-2a10-deb8-8da2071fbaf0]
Regards
Pavan

How to build shared members using Rules file

hi all,
we have a source file like below,in that Bold members are shared member. we doknow how to modify the source file for building shared members using Rules file.
Conf Total,~,Config A,*Lightbolt 365 A*
Conf Total,~,Config A,*Lightbolt 540 A*
Conf Total,~,Config A,*Lightbolt 730 A*
Conf Total,~,Config A,*Thunderball 365 A*
Conf Total,~,Config A,*Thunderball 270 A*
Conf Total,~,Config A,*Roadranger 123 A*
Can anyone give suggestion to resolve this issue.
Thanks in Advance

hi John,
Here i'm building the dimension through generation build method.
setting the properties as
Field, Dimension, Field Type, Field Number
Field1,Product,Generation,2
Field2,Product,property,2
Field3,Product,Generation,3
Field4,Product,Generation,4
After mapping it shows dimensions are correctly mapped.
When i load the source file and the rule file, it shows error partially loaded data,.And it doesn't shows the shared member property. That is what asked How to modify the source file for building shared members using Rules file.
Thanks,
Edited by: user@99 on 25-May-2010 15:37

Error while creating rule policies in rule builder

hi all ,
We are using CRM 7.0 , we are configuring territory management using building block ( C06 ).
In territory management while configuring territory atributes through WEB UI , I am facing a problem in step no. 4.5.3 of building block (C 06) which states:-
4.5.3     Define Rule Policy and Rule Set
Use
Rule Sets logically group rules and define their parameters.
Procedure
1.     Access the activity using the following navigation options:
CRM Web UI          Logon using the role Sales Manager
Navigation          Sales Operations- Search - Rule Policies for Rule Builder
2.     Click New and select TM- Territory Management as Rule Policy Type. Enter the description BP Territory Management for your Rule Policy
+After this step I am not able to edit or create a node for it...which is said to be done in next step..+
3.     Select the newly create policy and click on new Node to enter a new rule set. In the pop-up window, select the option Rule Set to create a new rule set from scratch. You can also select the option Rule Set with Template if you would like to create a new rule set based on a previously created set. Enter a description.
Field name     User action and values
Description     Postal Code Assignment
4.     Choose Save.
thanks
SHIKHAR ARORA

Hi,
we are facing the same error. (CRM 7.0 SP05)
Did anybody fix this problem right now.
Thanks
Christian

Unable to "Add Rule Policies for Rule Builder"

Hi,
I have requirement to implmenet territory management. But I am unable to add 'Rule Policies for Rule Builder' in WebUI. When I go to Rule Policies(under the section 'Sales Operations') and Click on 'New'. A Pop up comes up with ID- 'TM' (Territory Management) as selection option. But when i click on it nothing happens. Please let me know the reason and solution of the same.
Please note that I have already implemented below mentioned steps:
1. Copy Rule Attributes in Client 000 to Transport request
2. These services are Active:
u2022 md110empbp_job
u2022 md110fdt_tmgmt
u2022 md110h_tmgmt
u2022 md110m_tmgmt
u2022 md110simu_tmgmt
u2022 md110s_tmgmt
3. Assign authorization object CRM_FDT to business role.
4. Tried checking in firefox, as it was not working on IE.
Please suggest a fix for this.
Regards,
Amit

Hi Amit
Hope this documentation link helps you
http://help.sap.com/saphelp_crm70/helpdata/en/1e/606658bed54f8eb2d00a34991d85d5/frameset.htm
thanks & Regards
Raj

Using rules file

using rules file how to create consolidation signs like +,-,%,*etc..in the outline.

You need them in a seperate column in your dim build then tag them as a "Property" from the Dimension Build Properties tab.

Reg: To open a Browse Window Using Form Builder

Dear All,
I am trying to open a browse window using form builder.I am using forms 10g.
I have user the following code.
Declare
l_file_name Varchar2(383);
Begin
l_file_name := webutil_file.file_open_dialog( );
If
l_file_name Is Not Null
Then
If
:images.Rowid Is Not Null
Then
create_record;
End If;
client_image.read_image_file ( l_file_name, Substr ( l_file_name, Instr ( l_file_name , -1 ) ), 'images.images' );--block.item
End If;
End;I have attached the webutil.pll in attached library.
It shows an error" WEBUTIL Object group not attached to this form".
Can any one help me how to attach that object group.
Thankx in advance.
Cheers,
Jai.

write this in your 'Browse' Button's , when_button_pressed trigger
DECLARE
filename VARCHAR2(500);
BEGIN
filename:=GET_FILE_NAME(' ',NULL,NULL,'Choose any directory.',OPEN_FILE,TRUE);
:txtbx3:=filename; -- Here you will assign to you form's field.
END;Edited by: Tuts009 on May 10, 2010 5:00 AM

How to group data and assign cell names using Excel templates

Hi all,
reading the article "Real Excel Templates 1.5" on the Tim Dexter's Blog, I found that I need hierarchical data for Excel templates. So only in this way I can group my data.
My hierarchy is composed by 3 levels:
lev 1 DESTINATION: is the higher level that groups SERVICES and COUNTRY
lev 2 SERVICES: is the level that groups the countries
lev 3 COUNTRY: is the lowest level with the COUNTRY, CALLS and CALLS_MINUTES details
An example of my hierarchy is this:
lev 1 INTERNATIONAL
lev 2 INTERNATIONAL FIXED
lev 3 Albania 90 438,15
lev 3 Armenia 1 16,95
lev 2 INTERNATIONAL MOBILE
lev 3 Albania Mobile 161 603,35
lev 3 Australia Mobile 6 34,38
lev 1 NATIONAL
lev 2 HELLAS LOCAL
lev 3 Hellas Local 186,369 707940,6
lev 2 HELLAS MOBILE
lev 3 Hellas Mobile Cosmote 31,33 43856,97
lev 3 Hellas Mobile Q-Telecom 2,398 4343,78
lev 2 HELLAS NATIONAL
lev 3 Hellas Long Distance 649 1499,55
lev 1 INTERNET
lev 2 INTERNET CALLS
lev 3 Cosmoline @Free 79 2871,3
So, my data template is the following (with exactly the hierarchy I want for my data):
<dataTemplate name="emp" description="destinations" dataSourceRef="GINO_DB">
     <dataQuery>
          <sqlStatement name="Q1">
               <![CDATA[SELECT 1 TOTAL_CALLS, 2 TOTAL_CALLS_MIN from dual ]]>
          </sqlStatement>
          <sqlStatement name="Q2">
               <![CDATA[SELECT dest.ID_DESTINATION, dest.DESC_DEST from ale.AAA_DESTINATION dest order by dest.ID_DESTINATION ]]>
          </sqlStatement>
          <sqlStatement name="Q3">
               <![CDATA[SELECT ser.ID_SERVICE,
ser.ID_DEST,
ser.DESC_SERVICE,
count.ID_COUNTRY,
count.ID_SERV,
count.COUNTRY,
count.CALLS,
count.CALLS_MIN
from ale.AAA_SERVICE ser, ale.AAA_COUNTRY count
where ser.ID_SERVICE= count.ID_SERV
and ID_DEST = :ID_DESTINATION
order by ser.ID_SERVICE ]]>
          </sqlStatement>
     </dataQuery>
     <dataStructure>
          <group name="G_TOT" source="Q1">
               <element name="TOTAL_CALLS" value="G_COUNTRY.CALLS" function="SUM()"/>
               <element name="TOTAL_CALLS_MIN" value="G_COUNTRY.CALLS_MIN" function="SUM()"/>
               <group name="G_DEST" source="Q2">
                    <element name="DESC_DEST" value="DESC_DEST"/>
                    <element name="DEST_CALLS_SUBTOTAL" value="G_COUNTRY.CALLS" function="SUM()"/>
                    <element name="DEST_CALLS_MIN_SUBTOTAL" value="G_COUNTRY.CALLS_MIN" function="SUM()"/>
                    <group name="G_SERV" source="Q3">
                         <element name="DESC_SERVICE" value="DESC_SERVICE"/>
                         <element name="SERV_CALLS_SUBTOTAL" value="G_COUNTRY.CALLS" function="SUM()"/>
                         <element name="SERV_CALLS_MIN_SUBTOTAL" value="G_COUNTRY.CALLS_MIN" function="SUM()"/>
                         <group name="G_COUNTRY" source="Q3">
                              <element name="COUNTRY" value="COUNTRY"/>
                              <element name="CALLS" value="CALLS"/>
                              <element name="CALLS_MIN" value="CALLS_MIN"/>
                         </group>
                    </group>
               </group>
          </group>
     </dataStructure>
</dataTemplate>
Not considering the CALLS and CALLS_MIN details (I focused only on the COUNTRY which is as the same level), with this data template, making tests on my excel template, I noticed that I can group ONLY two nested levels using the format XDO_GROUP_?group_name?
XDO_GROUP_?G_DEST?
XDO_GROUP_?G_SERV?
or
XDO_GROUP_?G_DEST?
XDO_GROUP_?G_COUNTRY?
or
XDO_GROUP_?G_SERV?
XDO_GROUP_?G_COUNTRY
If I try to group all the three level together in this order
XDO_GROUP_?G_DEST?
XDO_GROUP_?G_SERV?
XDO_GROUP_?G_COUNTRY
I don't have the output I would like to have.....
Practically, in my excel I have 3 rows with the following labels
DESTINATION (called XDO_?DESC_DEST? - =Sheet1!$A$3
SERVICE (called XDO_?DESC_SERVICE? - =Sheet1!$A$4
COUNTRY (called XDO_?COUNTRY? - =Sheet1!$A$5)
where
XDO_GROUP_?G_DEST? (=Sheet1!$A$3:$B$5)
XDO_GROUP_?G_SERV? (=Sheet1!$A$4:$B$5)
XDO_GROUP_?G_COUNTRY     (=Sheet1!$A$5:$B$5)
I noticed that if I don't use the last one (XDO_GROUP_?G_COUNTRY), my output is correct even if I don't have more than one country for each service....As soon as I put XDO_GROUP_?G_COUNTRY....I loose all the 2nd level and the most of times the 3rd level too....
So...I think that the problem is how I choose the excel cells when I assign the XDO_GROUP_?group_name?
Anybody had made some tests, or can help me ???? I'm becoming crazy.....
Any help will be appreciated
Thanks in advance
Alex

But how can I use tags XDO_GROUP_?? to group data correctly using hierarchial xml, I don't want to use flat XML.
Yep, I using Template Builder in Excel to run reports localy, and output is wrong
It's seems that groups couldn't define the level of nesting, I think...
How can I write it in XDO_METADATA sheet?
Though I have hierarchial XML and groups should define nesting level correctly.
I have no clue.....

How to use Report Builder with permission extension

Is there any method to let web site which use SSRS and Report Builder use different permission extension module?
In our web site project we use ReportingService2010 Methods to show and operate folder and report which stored in Report Service, in our project configuration file, we use windows authentication mode for Report Service.
In requirement 1.User can do any operation in folder “A” and folder “B” (we can create and delete report or folder) in web site. 2.User can’t use “Report Builder” to save reports which created by Report Builder to folder “B”, Reports which created by Report
Builder only can be saved in folder “A”. [User click “Report Builder” button in our web page to start Report Builder, use “Report Builder” to create report, if user want to save report, we need to hidden folder “B” in “Report Builder” or we need to remove
some operate right from folder “B”.]
We have two solution:
1. We want to write extension module to process this issue, we want to re-write CheckAccess method which will be called by web site backend and Report Builder, but how can we know who called CheckAccess method[Web site backend called CheckAccess method
or Report Builder?]
2. We want to let Web site back-end use permission extension module named WebSitePer.dll, and Report Builder use PBPer.dll, how to modify the configuration file?

Hi Fang,
As far as I know, SQL Server Reporting Services (SSRS), have no permission extension. In Reporting Services, it is use role-based security to grant user access to a report server. There are two types of roles: Item-level roles and System-level roles.
Based on my test, if we assign user with System User System-level role, the user will have permission to user Report Builder to create report. However, if we only assigned Browser or Report Builder Item-level role to the user, he/she will have no permission
to publish the report to the report server. In this situation, although user have permission user Report Builder to edit the report, it will have no effect of the report in report server. User who has assigned Browser or Report Builder Item-level role will
have no permission to delete report in the report server.
There is an article about Setting Permissions in Reporting Services, you can refer to it.
http://technet.microsoft.com/en-us/library/aa337491(v=sql.105).aspx
Hope this helps.
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support

DIM: how to load metadata to Essbase without using rule files

Hi,
The Essbase adapter has been installed in the informatica PowerCenter (v8.1.1). We want to create a Essbase target definition to load metadata. In the Table Creation Wizard, we select Table Type: Dynamic dimension building (Type 3), but it needs to specify Rules file in the Column Creation Wizard.
Any method to load metadata into Essbase without using Rules file?
Thank you in advance.

You could load the data into Essbase without Rule file by means of free form loading which the Datasource would be a file.

Routing Service tickets using Rule Modeler

Hi experts,
We plan to use Rule Modeler for routing Service tickets created in Interaction center.
But, I am not aware of how it can be done. Could you let me know how this can be done?
Thanks & Regards,
Raj

Hi Raj
There is an "Escalate" button on the Service ticket. If you are planning to use that then heres how to configure routing using rules policy:
Business Role: IC_Manager
1. Open search in the rule modeler, select the context ID ORDER and start the search.
2. Select the policy DEFAULT and configure it to meet your business requirements by creating rules and assigning relevant conditions and actions.
To create your own policy.
IMG > Customer Relationship Management --> E-Mail Response Management System --> Service Manager --> Define Service Manager Profiles.
To forward to an organization, use the object type "O".
I hope this helps
Regards
Rupesh

Rule Builder Validity Date error

I've created territories with validity dates, rule policy, ect. When I start entering rules, no matter which territory I select, I get the following Consistency Check error.
Validity dates of rule TN Territories should lie with in the selected validity 00/00/0000-00/00/0000.
The rules are within the validity dates of the territories but those validity dates don't seem to be picking up in the rule builder. Anyone have any ideas????

Dear Seguin,
I have the same problem at one of my customers system. I was glad to see your thread.
Could you please give me more details how you solved this issue.
Thank you and best regards
Stefanie

EAS7.1 aso dimension property change using rule file.

I have a outline having 1 dimension "Terms" as a account type and data storage as "data store".Now i am trying to load members using rule file.
Outline: ABC (Active Alias Table: Default)
Scenario Stored <2>
Currency Stored
Terms Accounts
Now i have ceated a rule file using source file like
"Terms","T1","Terms Hierarchies","~O","",""
"T1","TOT"," ","~O","",""
"T1","OTH","","~O","",""
"OTH","Loaded Days","","~","",""
"OTH","Loaded FX","","~","","Loaded.FX",""
"TOT","R99"," ","~ "," "," "
"R99","R90","","+ "," "," "
"R90","R901","","+ "," "," "
i am using parent child relationship and i hav cheched the option s
like "allow property changes" and allow formula changes....in dimension build settings..the rule shows valid ..but during dimension member load it is giving me the folowing error
"\\Outline verification errors:
\\Member Terms has no value source. Aggregate storage outlines require non level-0 members in accounts dimension to be either non-stored members or have internal/external formula.
\\Member [Terms] has an unspecified error.
but if i am removing "~O" property with "O" only in data source file then the dimension member load is suuccessful...
wat i feel is anyhow the "dimension property change is not being set"...
can any one please tellme wat option i m missig to check in rule file..??
your opinion and suggestion will be highly appreciated.....

The documentation explains the difference with examples, now I was going to post the link but I might as well post the info from the link.
Joining Fields
You can join multiple fields into one field. The new field is given the name of the first field in the join. For example, if a data source has separate fields for product number (100) and product family (-10), you must join the fields (100-10) before loading them into the Sample.Basic database.
Creating a Field by Joining Fields
You can join fields by placing the joined fields into a new field. This procedure leaves the original fields intact. Creating a field is useful if you need to concatenate fields of the data source to create a member.
For example, if a data source has separate fields for product number (100) and product family (-10), you must join the fields (100-10) before you load them into the Sample.Basic database. If, however, you want to preserve the two existing fields in the data source, you can create a field (100-10) using a join. The data source now includes all three fields (100, -10, and 100-10).
For other rule options read - http://download.oracle.com/docs/cd/E17236_01/epm.1112/esb_dbag/ddlfield.html
Cheers
John
http://john-goodwin.blogspot.com/

Getting a "waiting..." or "installing..." message after sideloading an Enterprise signed app onto iOS 7 iPad Mini (among others) using App Builder 3.1.0.

Getting a "waiting..." or "installing..." message after sideloading an Enterprise signed app onto iOS 7 iPad Mini (among others) using App Builder 3.1.0. The app icon remains "dim" on iPad desktop with one of the two messages. The messages change depending upon sync with iTunes or power-up from a shutdown. Tried assigning v30 and v31 as viewer versions, neither appear to work. The certificate signing appear to work without incident. The appropriate profile appears correctly within the iPad does not show it is expired.

This happens when the mobileprovision file does not include the device ID of the device you are attempting to install onto. You need to recreate the .mobileprovision file and make absolutely sure the device ID for the devices are included.
Neil

Error while creating a cube using Cube Builder

we have installed the Cube builder for SSM 7.0
while creating the cube I am facing a error and the .TRC file contents are as follows :-
LSS>
LSS> set control LINKID SSM_CB_EA
LSS>
LSS> .... capture cube id in a control var to simplify queries on other tables
LSS> access lslink
LSLink> connect SSM_CB_EA
LSLink>
LSLink> SELECT ID FROM CPMS_CB_CUBES WHERE NAME = 'CUBEBUILDER1'
[Microsoft][ODBC SQL Server Driver][SQL Server]Invalid object name 'CPMS_CB_CUBES'.
SQLSTATE: S0002
SQL System code: 208
LSLink> lss create code = 'set control CUBEID ' + ID
LSLink> output proc setcubeid;PIPADMINDEFAULT over
LSLink> peek create nohead nonumb
No Fields currently Selected
ACC004:
No Record Has Been Accessed From the Database.
ACC004:
No Record Has Been Accessed From the Database.
CHE FRE
CHE UPD
Kindly help me out........

Hi Martin,
I believe that the issue you are encountering now is that you're using the wrong set of procedures for accessing MS SQL Server.
In section 5.4.1 (Setting up SAP NetWeaver System database software) in the Strategy Management configuration guide, there is a section which discusses steps that are required depending on whether or not you are using MaxDB or MS SQL Server as your system database behind NetWeaver CE. My guess is that you have not followed the steps described for SQL Server here. This is simple to do thoughm, because all you need to do is copy the files in the "<install-dir>\SAP\SSM\InternetPub\procs\sqlsrvr_procs" into the <install-dir>\SAP\SSM\InternetPub\procs" directory.
This is required because, when using Cube Builder or Entry and Appropval, the PAS component communicates directly with the system database in order to load data from there into PAS. Because MaxDB and SQL Server have different SQL syntax, specifically regarding field concatenation, slightly different SQL is required. So if you copy the SQL Server specific procedures across, you should be able to successfully build your model from Cube Builder.
Of course, having read through your question again I'm not 100% sure that this is what you are hitting. The problem you're seeing seems to be that, when we internally concatenate some selected fields together, we aren't finding a field called ID. However, the SQL select being issued doesn't seem to have returned any error messages, so I'm not sure why there is a problem referencing the field.
The only thing that comes to mind is a problem that I ran into at one point with the type of driver I was using to connect to SQL Server. The PAS component of Strategy Management, even though it runs on Windows 2003 Server 64bit, is still only a 32bit component. This means that, when configuring the System Data Sources within the ODBC applet in Control Panel, it is critical that the 32bit version of that ODBC applet be used - as documented in the note at the end of section 5.4.3 in the configuration guide. The reason this is important is because, if you use an OLEDB connection to SQL Server, for some reason the field names are not returned correctly. It is only when using the ODBC driver that the field names are returned correctly.
So please ensure that you are using the ODBC driver for your Link ID which connects to SQL Server, and not an OLEDB connection.
Hope this helps,
Robert
Edited by: Robert Holland on Dec 19, 2008 3:23 PM

Assigning Territory Attribtues Using Rule Builder

Similar Messages

Maybe you are looking for