Assing company code to company

hi,
What is the t-code to view the assignment of company codes to company? In which table this assignment is stored?
Best Regards,
UR
Moderator: Please, search SDN

HI
you can assign a company code to company in t-code OBY6. how ever you can even do it in the t-code OX16.
The data base table is T001
Regards
pavan kumar

Similar Messages

Assing more than one Plant to company code when valuation area is CdCd

Hello,
Is it possible to assing more than one plant when you change you valuation area (OX14) from plant to CdCd ?
Regards

Hi,
Is it possible to change the valuation level from a plant to a company code?
We currently have two plants and this leads to cost price differences between the plants for the same materials.
From a sales point of view the business requires margin reporting to be the same no matter which plant makes the same.
Is there a procedure to be followed to do this?
If at a later stage we want to move back to plant level valuation is thie possible?
Your input and help appreciated.
Regards

Print management and billing (client only)?

Is there an easy (and inexpensive if I may add) solution for managing print jobs in a Mac OSX environment (all Leopard)?
I would like to be able to track print jobs by client (architecture studio) and then be able to bill them.
Our setup is:
3 iMacs (Intel)
2 MacPro (PPC)
1 MBP (intel)
1 MB (intel)
1 MacMini (intel)
2 TimeCapsules
On the printer side:
1 HP Plotter
1 Panasonic Workio
2 smaller printers
All printers except 1 (USB and shared with the rest) are connected directly to the LAN (switch).
Even if there are some printers (the "2 smaller printers") that cannot be tracked I don't care. Most important for me would be to have a SW on each computer where the user can assing a "code" to each print job. These codes can then be collected.
HP seems to offer something similar but, for some reasons, the user, when printing with ArchiCAD 12, is not recognized by the printer itself, making it useless...

tools > Pykota probably best choice. (US$25)
others:
applications >
accsnmp
CUPS filter quota and log 1.0
lpdacc 1.0
phpprintanalyzer 1.1
printanalyzer
It seems to me that one way to use the simplest of these, which analyze the CUPS page_log, is to implement a policy within the company that workers must log in to a separate Username for each project - then accounting is easy because the programs identify pages by Usernames.
Good luck.

Fi with mm

hi
what is the difference between
MAINTAIN COMPANY CODE FOR MATERIAL MANAGEMENT
and
CLOSE PERIODS (MMPV) in mm
pl explain
with prasanthi

Hi:
MMPV executes program RMMMPERI to close the current period and open the new period.There are a number of activities that are managed by period in the materials ledger including: certain stock totals valuations, price units, goods movements, etc.
If you do not open Posting period in MM, When you create purchase order, GR/IR, it iwll give an error displaying that Period are not open.
You have to maintain company code for Material Managment
In order to assign Purchasing organization to Company code,
Assing Company code to plant.
Normally this is done by MM Consultant.
Please let me know if you need more information.
Assign points if useful.
Regards
MSReddy

I've about had it with HP

I've been around this site for 2 hours trying to find an "Email HP for assistance!" button that works when not under warrenty. Is it so flipping hard for a huge ass company to have an email option? Everywhere I go its "find your computer"... "youre not under warrenty!" Yes.. ok, fine, shut up and let me email someone.
Can someone please give me a link to or an email for contacting someone? All i want to know is what is the serial number for my laptops keyboard so I can buy a new one.
And no, I do not mean to turn to the community in a terrible mood. It's not your guys' fault. I just hate this stupid company and I hope that someone who is actually in a position to change something does such.
Chiko

Hi,
Sorry, many people on this forum are you and me. You help me and I help someone else. For parts, HP does not use serial number but part number. Please use the following link to order part, an emai will not go to anywhere:
http://h20141.www2.hp.com/hpparts/?cc=US&lang=EN&jumpid=hpr_r1002_usen
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Customer as Vendor

Hi FI GURUS and EXPERTS,
I have a Customer (10235) which also supply some material to us, i.e. a single party which acts CUSTOMER as well as VENDOR.
We want to maintain same account for this. i.e. PAYMENT & RECEIPT ENTRIES should go in same account for this party. So, we should able to know Whether we have to pay or receive from this party.
How can we configure this case in the system. PLEASE HELP.
With thanks,
DSC.

Hi,
In SAP we should Create Both Accounts (Customer & Vendor)
Assign Vendor Code in Customer Master General Data in Control Tab As will assing Customer Code in Vendor General Data in Control Tab.
when you execute vendor / customer reports you will get net off values.
http://help.sap.com/saphelp_470/helpdata/en/01/a9b4f0455711d182b40000e829fbfe/content.htm
Regards,
Viswa
Edited by: viswanatha s on Jan 7, 2011 5:34 PM

Where we assign operational chart of accounts to country chart of account

Hi Expert,
where we assign operational chart of accounts to country chart of account.
thnx,

Hello,
Use T.code OB62.
SPRO --> Fin. Acc (New) --> Gen Led. --> Master data --> GL --> Prep --> Assing Co. Code to Chart of Accounts.
Regards,
Jaymin R. Bhatt

Link Button Not Display for Tax Amount

Hi Experts,
I have one Problem
I am creating A/R Invoice Document and I have assing Tax Code for Item
It will show Tax Amount but link button or drill button not display for tax amount
pls give me solution
Warm Regards,
Sandip Kokate

HI
How to Clear Chumb
And I am Selecting Tax Code but still it will not show Tax Amount Link button but Tax Amount is perfectly Match
Regards,
Sandip kokate

SPECIAL PROCUREMENT KEY CUSTOMISATION (OMD9)

Any one can explain the various scenario where in we need to configure special procurement keys in customisation.
1. When we need to create keys without "As BOM component" indicators?
2. When we have to use the above indicators?
Pl. explain with business scenario.

One option is create new item category for stock transfer and assign that item category to the special procurement key in MRP and assign that tiem category in the purchasing document tyoe config so it will allow this only
OR the simple solotuion without config is
Create the screen variant using SHD0 transaction for the doc type ZIC and assing transaction code e.g
ZINTRA and give the user so whenever they will enter this code, system will defulat the ZIC doc type for STO.

Hiding field in invoice

Could anyone give me the steps to hide the unplanned delivery cost field in an invoice. Thanks in advance
Eric

You can not hide the standard layout of MIRO document level settings document like PO, PR & others are available in SPRO. Well use T-Code SHD0 make transaction variant by copying standard MIRO and hide your required fields. then assing t-code if required. or You can also use the variants.
If it helps, kindly give points, thanks.
Regards,
RM

Alternative Selection Options:

Hello,
I searched through the questions and did not find a question comparable to what i am looking for.
I want to have a radio button selection screen. Based on the radio button they choose,
then display further selection criteria for that button( plant, material, etc...). Seems like this event would
occur after initialization and before start-of-selection.
If there are questions just like this, please forward them link to me.
Thanks so much!!!
Steve

First, in order it works smoothly (without pressing ENTER after choosing one of radiobuttons) you have to assing function code to your radiobuttons.
parameters: pa_1 radiobutton group rad USER-COMMAND fcode,
                    pa_2 radiobutton group rad.
This will force triggerring PAI ( AT SELECTION-SCREEN ) every time you change your selection from pa_1 to pa_2 and vice versa.
Now you can have two different solutions:
- in PAI call different selection screens, i.e. one would have certain parameters, whereas the other would have different ones on it.
"first selection screen
SELECTION-SCREEN BEGIN OF SCREEN 110.
PARAMETERS: pa ...
SELECTION-SCREEN END OF SCREEN 110.
"second one, with different parameters
SELECTION-SCREEN BEGIN OF SCREEN 120.
parameters: pa....
SELECTION-SCREEN END OF SCREEN 120.
DATA: flag_disp TYPE c VALUE 'X'.
AT SELECTION-SCREEN OUTPUT.
"first we need to call selection screen 110 - we do it only once (that's why I am using this flag and clearing it afterward)
IF flag_disp = 'X'.
    CLEAR flag_disp.
    CALL SELECTION-SCREEN 110.
ENDIF.
AT SELECTION-SCREEN.
"now depending on radiobutton selection....
IF pa_1= 'X'.
    SET SCREEN 0.   "...first we leave current call sequence
    CALL SELECTION-SCREEN 110. "then we call new selection screen
    LEAVE PROGRAM.
ELSE.
    SET SCREEN 0.
    CALL SELECTION-SCREEN 120.
    LEAVE PROGRAM.
ENDIF.
The other solution (simpler one) would be placing all the fields (parameters) on selection screen and by default make them all disabled. Now depending on radiobutton selection you make them back input ready.
"first you place all the parameters you want
parameters: pa_plant ...
                    pa_matnr...
AT SELECTION-SCREEN OUTPUT.
   loop at screen.
      case screen-name.
        when 'PA_PLANT'.
           if pa_1 = 'X' . "first radiobutton selected
              screen-input = 0. "disable PLANT
           else.
              screen-input = 1. "enable PLANT
           endif.
        when 'PA_MATNR'.
           if pa_1 = 'X' .
              screen-input = 1. "disable MAT
           else.
              screen-input = 0. "enable MAT
           endif.
      endcase.
      modify screen.
   endloop.
Regards
Marcin

Error in account determination: table T030K key 1000 VSE-URGENT

Hi Guys,
I have service P.O for which Automatic G.R has been made through Service entry and MIRO has been posted.
While reversing (Cancelling) the MIRO document through t-code MR8M I am getting error message as "Error in account determination: table T030K key 1000 VSE".
On doing trial and error we found the following.
For Account key VSE If we assign Tax code in ( Rules: On checking Tax code) we could able to reverse. We are not supose to assing Tax code we should only assign G/L account number for Account key. If we do so again we are getting the above error.(This was done in T-code:OB40)
Please guide how do I trouble shoot this.
Thanks
Dhanu
Edited by: Dhananjayappa E on Jul 28, 2008 3:21 PM

Hi Pankaj
We have maintained TAX CODE WITH THE percentage in Fv11.
But Other condition type G/L accounts are not maintained with the Tax code.In OB40 we have maintained JEC4 G/L account with out tax code. When doing same thing to JES4 we are getting the said error.
Hope you are getting the issue. If confusing Please let me know.
Dhanu
Edited by: Dhananjayappa E on Jul 28, 2008 4:42 PM

Webcast with JMF

I'm an under-graduate Engineering student - computer division, and I'm developing a virtual classroom application as a part of my graduation project.
I'm doing most of my project using JAVA techonologies, and I waneted to do the virtual classroom part using JAVA too.
I need to do some kind of video/audio conference using JMF, where users can join the conference, see the instrucor, and instructor's screen, also the instructor should be able to receive requests from participants to grant or deny them.
I was playing around with JMF in the last week and I found some interesting features, I also check the JMF solutions, and I ran some of the RTP stuff offered there, but what I need to do involves something like a webcast, which I could not find anything about.
Need help please
Thanks in advance
J.MAX

My latest thoughts on this (after some hacking):
RTSP server available called VODKA (Video On Demand Kicks Ass) some code is there, a reply from a developer was 'try it' so I think you could get something out of it.
Using RTP I wrote my own sockets controller to count how many connections there are (also sending setup, start, stop and teardown, like RTSP, so the 20-30% cpu of the transcoder isn't always on), you could then send video to each person who asks...) or if you are on the same subnet or VPN then you could multicast.
multiple unicasts would require datasource cloning? I am not sure... hope this helps you work some things out, my solution was to use multicasting with some custom sockets

Customer / Vendor number range company Code

Hi All,
I have Created two Account Groups each for customer and vendor masters.
Domestic and International. We have 5 Comapany Codes. I want to Use the same Account Groups in all the company Code.
If i Create a vendor for domestic in company Code 1, It creates a Vendor with number 1001.
next I create a vendor for domestic in comapny Code 2, system assing 1002 as vendor number. but i want to use the start with number 1001 for company code 2 and also for company Codes.
Is it possible to acheive this with having only two account groups and assigning number based on company code.
Regards
Karthik

Dear Karthik,
Create customer and vendor account group company wise.
For eg Raw material vendor - xxx1 co code, Raw material vendor - xxx2 co code
This exercise will increase the no of vendor and customer groups. Just check the feasibilty of managing the same.
Regards,
Kiran

Contract from centralized purchase organization without company code

Hi Experts.
We have six company codes
And having one centralized purchase organization and it is not assigned to any company codes
While creating contracts all company code uses this centralized purchase organization.
My question is :-
I want to create contract with above centralized purchase organization without company codes in it so while converting above contract to po we can use any one company code in the po.
How to create contract with centralized purchase organization without company code? (Later this contract can be used to convert po from any the company codes )
Please helpu2026
Thanks in Advance
Prashanth.Venkategowda

Hi,
What you need to do is:
In SPRO->Org.Structure->Definition->Materials Management->Maintain
Purch. Org. you need to "declare" all your Purch. Orgs.
In "SPRO->Org.Structure->Assignment->Materials Management->Assing
Purch. Org. to company code" you must NOT assign your corporal Purch.
Org to any company.
In the Plant assignment screen assign your corporal Purch. Org to all
the relevant Plants.
In this kind of hierarchy you make all the purchasing activities
(contracts, PO's etc.) for this purch org.
Thats all.
In the case that you have 2 level hierarchy: one corporal and many
company\plant assigned purch. orgs you need to do additional step.
After assigning a "small" purch. orgs to the plants and companies you
can assign them to "reference" Purch Org. (that not assigned itself to
any plant/company) in the ""SPRO->Org.Structure->Assignment->Materials
Management->Assing Purch. Org. to reference Purch. Org."
That kind of hierarchy allows you to make a contracts at the "reference"
org. level and use them in PO's by the lowest purch. orgs.
Hope that it will help.
Regards,
Udaya.

Assing company code to company

Similar Messages

Maybe you are looking for