Assisning function code

Hi all,
We have requirement of assigning function code to radio button on screen.
It's urgent.
Thanks in anticpation.
Regards,
Rajashree

Hi as per previous answer you select and make a group of radio button by right clicking then you will be able to give it FCODE.
But now your Radio Button will work like a push button clicking it will activate the PAI event. Now in pai you have to write a case statement to know which button is pressed.
Example: With three radio button named Radio1,2 and 3 with FCODE RAD and Group name RADIO_GRP.
DATA: radio1(1) TYPE c, radio2(1) TYPE c, radio3(1) TYPE c.
MODULE USER_COMMAND_0100 INPUT.
CASE 'X'.
when radio1.
when radio2.
When radio3.
endcase.
ENDMODULE. " USER_COMMAND_0100 INPUT

Similar Messages

Function Code can not be selected

Dear expert,
Please help me, there is a uploader For MIGO, USer is uploading data using this uploader, Sometimes when user try to upload data, he gets a message on status BAR:
Function cannot be selected, When i Double Click on that Message i Get Following Information:
Message NO: 00255
Diagnosis
You entered an Inactive function code
You can trigger this by:
inputting directly in the OK code field
inputting the fastpath of an inactive menu function
choosing an inactice function key, or even by
choosing enter, if enter has an inactive function
In batch input a function code is included in field BDC_OKCODE of the session, as long as this function Code is not assigned to Enter
As well as activating function codes stastically in the menu painter(Transaction SE41), they can also be deactivated dynamically using the excluding addition with PF-STATUS.
Now one more thing i want to tell you is when user just open MIGO directly and try to enter some data and get back before saving and then Execute uploader then user can upload data without any error,
Kindly tell me what shoul i do to remove this error permanently
Thanks in advance
Regards
Shelly Malik

There is an error in this uploader, it should not call this command which is not available on that screen. What is this uploader? If it's a custom abap program, you must debug it.

How to track the standard function code eg. PRI

Dear All,
I have a requirement that says that I will execute a report. Now when the user will click on the print button may be customized or can be taken from menu (Standard PRI) I want to update a table when the printout has been taken. I am not able to track down the print functionality through AT USER-COMMAND. Can anyone please help me out.
Thanks and regards,
Atanu

open the standard program in se80
check the standard menu items in GUI status.
check the function code there..
regards.
santhosh reddy

How to find function code for buttons on toolbar in oops alv

Hi experts,
I want to remove some buttons from toolbar in oops alv, i know the procedure like get function code and pass the value in a table and pass that table to IT_TOOLBAR_EXCLUDING of
method set_table_for_first_display but I WANT TO KNOW HOW TO FIND FUNCTION CODE FOR BUTTONS ON TOOLBAR IN OOPS ALV

Hi Prakash,
-->First you have to set the pf status in your alv program by,
{FORM pf_status USING rt_extab TYPE slis_t_extab.
SET PF-STATUS 'FIRST'.
ENDFORM.                    "PF_STATUS}
-->Pass this Subroutine name in the Function module, Reuse_alv_grid_display's parameters i.e,
      i_callback_pf_status_set          = 'PF_STATUS'}
*-->Then doble click on that pf status,
From the menu bar, select Extras->Adjust Template->List Viewer,
This will give you the existing statndard gui status of the program*
->Then catch that function codes in the User command Parameter of the Function module Reuse.. i.e,
      i_callback_user_command           = 'COMM'
And make a subroutine of the name 'COMM'i.e,
FORM comm USING ucomm LIKE sy-ucomm selfield TYPE slis_selfield.
DATA: okcode TYPE sy-ucomm.
okcode = ucomm.
CASE okcode.
    WHEN 'REF'.
    CALL FUNCTION 'POPUP_TO_INFORM'
      EXPORTING
        titel         = 'MANSI'
        txt1          = 'CREATED BY'
        txt2          = SY-UNAME
      TXT3          = ' '
      TXT4          = ' '
endcase.
Hope it helps you
Regrds
Mansi

How to translate function codes from GUI-status into other language ?

Hello experts,
I've a programm called mrs - multi resource scheduling.
This programm has texts in english and german.
Now I want to translate the text also in italian.
When I opne the programm in se80, in path GUI-status
there are the ui-elements (Function codes).
When I open them in english, I get the texts in english, when
I open them in german , I get the texts in german.
Openeing in italian shows me the english texts.
Changing them into italian I get message:
You can only maintain the object in modification
lang. German (DE) in this system
If I proceed in translating the german text in italian, I get italian texts instead of german.
Some ideas ?
Thanks Gerd

Use [SE63|https://www.sdn.sap.com/irj/scn/advancedsearch?query=se63&cat=sdn_all].([Translating Objects Directly|http://help.sap.com/saphelp_nw04/Helpdata/EN/41/71601b3ab0f34a8e00aa01338c68f3/content.htm]) else work on a system where italian language is installed.
Regards

Assigning a function code to radio button in 4.5B

Ive a requirement wherein I need to trigger the PAI event in a module pool program when I select a particular radiobutton in a group and do some processing subsequently.
For this I need to assign a function code to the radiobutton group.
But the function code field is disabled for input in the properties screen of the layout. Our client system is SAP 4.5B.
I am able to assign function codes to radio button groups in esuides(4.6C) and other systems.
I want to know whether we can assign a function code at all to a radio button group in version 4.5B.
If so, please tell me how to do this.
With regards,
ramu.

Hi,
we can't assign function codes to radio buttons.
for assigning some code to radio button.check the radio button status.
in PAI.
if RAD1 = 'X'.
xxxxxxxxxxx.
xxxxxxxxx.
elseif RAD2 = 'X'.
xxxxxxxxx.
xxxxxxxxxxxx.
endif.
regards,
bharat.

"Function code cannot be selected" error while uploading a document.

Hi,
When we try to upload a document into SAP the user is getting the error "Function code cannot be selected". Detailed error is given below. Only one user is facing this error in PRD. For all other users it is working fine. We replicated the same issue in testing systems and it is working fine there with the same user's id.
The detailed error is,
No batch input data for screen SAPLF040 0300
Message no. 00344
Diagnosis
The transaction sent a screen that was not expected in the batch input session and which therefore could not be supplied with data.
Possible reasons:
1. The batch input session was created incorrectly. The sequence of screens was recordly incorrectly.
2. The transaction behaves differently in background processing in a batch work process than when running in dialog (SY-BATCH is queried and changes the screen sequence).
3. The transaction has undergone user-specific Customizing and therefore certain screens may be skipped or processed differently, according to the current user. If the person who created a batch input session is not the same as the person now processing it, this problem may occur frequently.
System Response
None.
Procedure
For 1: Either re-create the session or process it in expert mode. Correct the batch input program.
For 2. It is very difficult to analyze this problem, particularly in the case that the screen sequence or the display-only options of fields differ according to whether the transaction is being processed in the background or as an online dialog. It could also be that this kind of transaction cannot run with batch input.
For 3: Have the creator of the session process it. If no error occurs now, then this is a program with user-specific Customizing.

Hi Amar,
I am facing the same issue while processing Vendor master inbound idocs, Few Idocs gone in error with error message "Function code cannot be selected".
Could you please suggest any solution found for the same.
Thanks in advance
Shivam

ALV-Grid: Is it possible to catch "LOCAL Function Codes" in any Event ??

Hi,
is it possible that i can catch a "Local Function Code" in ALV Grid with an Event??
For example if you click to an Grid Button on the toolbar than it must call an Event!
..........BUTTON: Local APPEND (existing in ALV Toolbar)
Function Code: '&LOCAL&APPEND'
My Idea is:
--- IF i click to the Button "Local APPEND" in the ALV toolbar, than it must after this command give me an Message( "It was Successfull" ).
But the "Local Function Codes" dont called the Event "User_command" OR "After_user_command" is there any other Event for this "Local Function Codes"???
Have anyone an idea?
Thanks in forward.
Ersin

Hi,
See following thread.
http://scn.sap.com/thread/715996
Thanks
Santosh

How to change the Partner function code in Quotation

Hi All,
We have a requirement that whenever a Quote is cancelled,
We need to change one of the function codes in the partner tab and also the user status should be changed.
Can anyone give a quick solution on this?
Your response will be appreciated.
Thanks in advance.
Regards,
Ramya

You will best implement this as an action (tx. SPPFCADM), which is called on changing the status to cancelled. In this action you can call a function module changing the partner functions using e.g. CRM_ORDER_MAINTAIN as the appropriate function module.
Regards, Kai

How to trap the two function code in the bdc

Dear All,
I have a bdc program now i need to pick up function code based on some condition. means if some condition then goto one function code and else don't go. I tried it but not working. It is working in shdb but not in the program.
eg.
    if not zcontract_no is initial.
       perform bdc_dynpro using 'SAPMZW_CREATE_SALES_ORDER_STD'
                                '9000'.
       perform bdc_field using 'BDC_CURSOR'
                                    'P_CONTRACT'.
        perform bdc_field using 'BDC_OKCODE'
                                <b>'=COPY'.</b>
      endif.
perform bdc_field using 'BDC_OKCODE'
                                <b>'=SUBMIT'</b>.
Please suggest.
Regds,
Anup

Hi ,
    In your second case u r not specifying the BDC DYNPRO screen number , your code should be
if not zcontract_no is initial.
perform bdc_field using 'BDC_OKCODE'
'=COPY'.
else..
perform bdc_field using 'BDC_OKCODE'
'=SUBMIT'.
endif.
Kunal

How to get the partner function code by partner function?

For example, I need to know the partner function code for 'Reported By' and it's 'SLFN0002', How can I get this information by abap code?
Best regards,

Hey Blake,
You can look up CRMC_PARTNER_FT( Db table ) which is used in the above maintainance view...
Use select stmt to populate an internal table.. then use Read Table( which key DESCRIPTION = < Sold to party > and so on...
Just Get an Abaper and things would be easy..
Reward points for usefull posts..
Regards,
Anand

Error in Module pool:Function code

Hi All,
I am using IW52 transacion for which I have activated the Screen exit and inserted table control on it.
The table control entries has to be deleted for which I have added a Delete button with function Code 'DELE'.
When trying to delete the entry the system throws an error message saying that 'The function code DELE is not available here'.However after pressing enter the entries are deleted.
I have debugged for the error and could find that the table T185F is being checked in the function module screen sequence.
Could someone please let me know how to customize the table with the function code I have added.
Thanks.
Arvind

Hi Neha,
The link says that we cannot enter Custom User command in the SAP Screen exit.But I think there is a way to maintian T185* table in VFBS transaction.
I tried the same and now not getting the error message that "Function code XXX is not available here".
The problem is now that the system is always keeping the OLD sy-ucomm value.That is when I press delete records I get a confirm prompt message ( custom ) and record gets deleted.After this I again press enter the pop up comes again.
I checked in de bugging and found that the sy-ucomm was not cleared.I tried to clear sy-ucomm values but the main program of the transaction again resets the Sy-ucomm.
Please let me know if you or anyone has any solution to deal with this.
Thanks.
Arvind
Edited by: Arvind Soni on Jan 19, 2009 11:34 AM
Edited by: Arvind Soni on Jan 19, 2009 11:34 AM

Function code for dropdown on OO ALV Grid to trigger user_command

Hi Experts,
I know we can add a dropdown to a column of an OO ALV Grid, set values to the dropdown list and allow the user to select some these values.
However , what I'm not sure is that if we can *assign a function code to the dropdown * which would then trigger the event user_command ( PAI ) of the ALV class so I can handle the changes to when a particular value is selected from a dropdown list, just like we do in normal dialogs.
Now I know that I can register the 'Enter' event and handle the data changes in data_changed event, but that is something I want to avoid the user from doing as far as possible to make the report more user friendly.
Awaiting your valuable inputs and would really appreciate your help.
Thanks & regards,
Advait

Hi Advait,
No problem. Yes, this functionality requires changing the focus to other cell.
I think there is other solution. As the dropdown is kind of F4 activity try this way:
data: it_f4 type lvc_t_f4,
        wa_f4 type lvc_s_f4.
        wa_f4-FIELDNAME = 'CONNID'.
        wa_f4-REGISTER = 'X'.
        wa_f4-GETBEFORE = 'X'.
        wa_f4-CHNGEAFTER = 'X'.
        append wa_f4 to it_f4.
"register F4 event
CALL METHOD g_alv_grid_ref->register_f4_for_fields
    EXPORTING
      it_f4 = it_f4.
"Once you try to pick the value HANDLE_DATA_CHANGED event will be triggered
"Definition
     methods:
     handle_data_changed FOR EVENT data_changed OF cl_gui_alv_grid
                              IMPORTING er_data_changed e_onf4 e_onf4_before e_onf4_after,
"Implementation
METHOD handle_data_changed .
    DATA: ls_mod_cells TYPE lvc_s_modi.
    IF e_onf4_before = 'X'.
      MESSAGE 'Data changed before F4' TYPE 'I'.
    ENDIF.
    IF e_onf4 = 'X'.   "if event triggered by F4
      MESSAGE 'Data changed on F4' TYPE 'I'.
    ENDIF.
    IF e_onf4_after = 'X'.
      MESSAGE 'Data changed after F4' TYPE 'I'.
    ENDIF.
   "here you know which cell was modified
    LOOP AT er_data_changed->mt_mod_cells INTO ls_mod_cells.
     "just example test case, here you can implement your code for modified cells
      IF ls_mod_cells-value >=5.
        CALL METHOD er_data_changed->add_protocol_entry
          EXPORTING
            i_msgid     = 'SABAPDOCU'
            i_msgty     = 'E'
            i_msgno     = '888'
            i_msgv1     = 'Only numbers below 5 are possibe'
            i_msgv2     = 'Please correct'
            i_fieldname = ls_mod_cells-fieldname
            i_row_id    = ls_mod_cells-row_id.
        CALL METHOD er_data_changed->modify_cell
          EXPORTING
            i_fieldname = ls_mod_cells-fieldname
            i_row_id    = ls_mod_cells-row_id
            i_value     = space.
      ENDIF.
    ENDLOOP.
ENDMETHOD.                    "handle_data_changed
This approach works fine for picking value from input help. Never tried it for dropdown list. You have to try it out.
Regards
Marcin

How to create function code for field in GRID like list box in screen

Hi all,
I have requirement like drop down is created for field1 in GRID,
and have given f4 help for it, as soon as i change the data in the field
event has to trigger to update thevalues in other field.
This scenario i worked on screens where field is created with listbox and assign function code to it
when the field value changes the event triggers .
Is there is anything like that which will fire the event for field value changes.
can i update anything through the fieldcatalogue.
anybody help me on this
Regards,
Madhavi

Hi Madhavi,
yes we can do that by registering edit events..
check the below example.. has both the variants dropdown/f4 hlp...
screen flow logic
PROCESS BEFORE OUTPUT.
MODULE pbo.
PROCESS AFTER INPUT.
MODULE pai AT EXIT-COMMAND.
program
*       CLASS lcl_event_responder DEFINITION                           *
CLASS lcl_event_responder DEFINITION.
PUBLIC SECTION.
    DATA : ls_changed_cell TYPE lvc_s_modi,
            lv_language     TYPE spras..
    METHODS refresh_changed_data FOR EVENT data_changed
                                  OF cl_gui_alv_grid
                                  IMPORTING er_data_changed
                                            e_ucomm.
ENDCLASS.                    "event_responder DEFINITION
DATA: go_handler         TYPE REF TO lcl_event_responder,
      go_container       TYPE REF TO cl_gui_custom_container,
      go_grid            TYPE REF TO cl_gui_alv_grid,
      gt_fieldcat        TYPE lvc_t_fcat,
      gv_language        TYPE spras VALUE 'E',
      gt_outtab          TYPE TABLE OF makt WITH HEADER LINE.
PARAMETERS : dropdown TYPE char01 RADIOBUTTON GROUP grp,
             f4help   TYPE char01 RADIOBUTTON GROUP grp.
START-OF-SELECTION.
CALL SCREEN 100.
END-OF-SELECTION.
*       MODULE PBO OUTPUT                                             *
MODULE pbo OUTPUT.
SET PF-STATUS 'BASIC'.
PERFORM create_and_init_alv CHANGING gt_outtab[]
                                       gt_fieldcat.
ENDMODULE.                    "pbo OUTPUT
*       MODULE PAI INPUT                                              *
MODULE pai INPUT.
SET SCREEN 0. LEAVE SCREEN.
ENDMODULE.                    "pai INPUT
FORM create_and_init_alv CHANGING pt_outtab LIKE gt_outtab[]
                                  pt_fieldcat TYPE lvc_t_fcat.
CHECK go_container IS NOT BOUND.
CREATE OBJECT go_container
    EXPORTING
      container_name = 'CUSTOM'.
CREATE OBJECT go_grid
    EXPORTING
      i_parent = go_container.
PERFORM build_display_table.
PERFORM build_fieldcat CHANGING pt_fieldcat.
IF dropdown EQ abap_true.
    PERFORM set_drdn_table.
ENDIF.
go_grid->set_table_for_first_display( CHANGING it_fieldcatalog      = pt_fieldcat
                                                  it_outtab            = pt_outtab ).
go_grid->set_ready_for_input( 1 ).
" raises the 'data_changed' event when we select another cell/any action after changing the data
go_grid->register_edit_event( EXPORTING i_event_id = cl_gui_alv_grid=>mc_evt_modified ).
CREATE OBJECT go_handler.
SET HANDLER go_handler->refresh_changed_data FOR go_grid.
ENDFORM.                               "CREATE_AND_INIT_ALV
FORM build_display_table.
FREE gt_outtab.
SELECT * FROM makt UP TO 20 ROWS INTO TABLE gt_outtab WHERE spras EQ gv_language.
ENDFORM.                               "build_display_table
FORM build_fieldcat CHANGING pt_fieldcat TYPE lvc_t_fcat.
DATA ls_fcat TYPE lvc_s_fcat.
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
    EXPORTING
      i_structure_name = 'MAKT'
    CHANGING
      ct_fieldcat      = pt_fieldcat.
LOOP AT pt_fieldcat INTO ls_fcat.
    IF    ls_fcat-fieldname EQ 'SPRAS'.
      ls_fcat-edit       = abap_true..
      ls_fcat-outputlen = 8.
      IF dropdown EQ abap_true.
        ls_fcat-drdn_hndl = '1'.
        ls_fcat-checktable = '!'.        "do not check foreign keys
      ENDIF.
      MODIFY pt_fieldcat FROM ls_fcat.
    ENDIF.
ENDLOOP.
ENDFORM.                               "build_fieldcat
FORM set_drdn_table.
CHECK go_grid->offline( ) IS INITIAL.
DATA: lt_dropdown TYPE lvc_t_drop,
        ls_dropdown TYPE lvc_s_drop.
ls_dropdown-handle = '1'.
ls_dropdown-value = 'EN'.
APPEND ls_dropdown TO lt_dropdown.
ls_dropdown-handle = '1'.
ls_dropdown-value = 'DE'.
APPEND ls_dropdown TO lt_dropdown.
CALL METHOD go_grid->set_drop_down_table
    EXPORTING
      it_drop_down = lt_dropdown.
ENDFORM.                                " set_drdn_table
FORM change_display_table USING pv_language pv_rowno TYPE i.
READ TABLE gt_outtab INDEX pv_rowno.
SELECT SINGLE * FROM makt INTO gt_outtab WHERE matnr = gt_outtab-matnr AND spras = pv_language.
IF sy-subrc EQ 0.
    DELETE gt_outtab INDEX pv_rowno.
    INSERT gt_outtab INDEX pv_rowno.
ELSE.
    CLEAR : gt_outtab-maktx,
            gt_outtab-maktg.
    DELETE gt_outtab INDEX pv_rowno.
    INSERT gt_outtab INDEX pv_rowno.
ENDIF.
ENDFORM.                    "change_display_table
*       CLASS event_responder IMPLEMENTATION                          *
CLASS lcl_event_responder IMPLEMENTATION.
METHOD refresh_changed_data.
    READ TABLE er_data_changed->mt_mod_cells INTO ls_changed_cell INDEX 1.
    CALL FUNCTION 'CONVERSION_EXIT_ISOLA_INPUT'
      EXPORTING
        input = ls_changed_cell-value
      IMPORTING
        output = lv_language.
    PERFORM change_display_table USING lv_language ls_changed_cell-row_id.
    go_grid->refresh_table_display( ).
ENDMETHOD.                    "click
ENDCLASS.                    "event_responder IMPLEMENTATION
Cheers,
Jose.

How to maintain the function code added to a custom screen in IW31

Hello gurus,
Does anyone know how can I maintain the function code of the push button I have in my enhancement screen in IW31 (Service Order). 'Coz it says "Requested function 'my fcode' is not available". I tried it in VFBS but don't know the screen sequence or what's the right data to put. Please help me with this. Thanks.
Regards,
AyemSheera

Hi, you need add Your Function Code into the Tables T185x (x like T, F...). Call Transaction SM30 (SM31), put the Table name T185 into Table name and select the Button 'Maintain' or Customizing. The Transaction will navigate you to right position in Customizing. Next, you need to find in the Table's T185x Line with the Program Name SAPLCOIH. Then add your code into the Table's. At next, You have to maintain Your function Code in the PAI module of your Custom screen in the TA IW31.
Sincerely Yours,
Lubomir.

Assisning function code

Similar Messages

Maybe you are looking for