Assning a "position"  (to an object) (e.g. in cm from margin of page)

Hello,
I have a pdf-file (which was created from a MS-word.doc).
On some pages, there is a word and a line (at the top of the page) which I want to copy to all the other pages (and later I want to change the wording slightly, so that there is a different word on each page). I know how to "copy" the object with Tools/Advanced Editing/TouchUpObject and from one page to another, but:
The PROBLEM: I want to have the words on exactly the same place(=position) on every page (e.g. in centimeters from top margin and left margin of the page). So my question: Can I somehow find out the "position" of the object (e.g. in centimeters from margins of page) and then assign this position to the other object(s). Is this possible?
Thanks for your help.

Hi,
I don't think you can focus on static objects (static text, static images).
I think the down and dirty workaround is your best option. Maybe make the button very small (0.01in) and you can always place a static image (icon) over it to mask the button.
N.

Similar Messages

  • Link users - positions - roles - authorization objects

    Hi guys,
    I want to write a report that would link USERS to POSITIONS to ROLES and finally to AUTHORIZATION OBJECTS. The user would enter the SAP username in the selection screen and the report should extract all the information listed above.
    I am able to link the following:
    + Users to positions via function module RH_BRANCH_GET
    + Users to roles via table AGR_USERS
    + Roles to authorization objects via function module PRGN_1251_READ_FIELD_VALUES
    Unfortunately, I dont know how to link positions to roles
    Does anyone know how to do that?
    Also, is there a more efficient way, than the approach highlighted above, to complete this requirement
    Thanks for your time
    -TR

    Hi,
    you can find a link between role and HR object in table HRP1001. The field SOBID contains name of the role. You need to find way how to convert object ID into position role. Be careful about additional fields from that table.
    Cheers

  • How to attach an object back to its source in a master page?

    Hello,
    on a content page I can access objects from the assigned master page using the Ctrl+Shift+LeftClick combination. By doing so I detach many attributes of this object from the master page specifications. How to reset an object and attach it back to the source object of the master page?
    If you are a PowerPoint user, the option reapply slide layout may be familiar to you (this function resets all format overrides to the master settings). I am looking for a similar function in InDesign.

    I really looking for a way to change the position of the second and third text boxes relative to other items on the page.
    An overriden master page item will still respond to its master's position if its position on the page after overriding hasn't been changed. So, you can have the "directions" box on the master page, override it, add text, and as long as you don't move its x, y position in the process of adding text, it can be moved via the master page in the future. The key is not to move it in the editing process.
    Same goes for other attributes. If the fill color is red, you can change it to gray from its master later, as long as you don't change the page item's fill to pink in between.
    It's also possible to match a changed page item's attributes to its master via scripting.
    So for example if you had a 3" text box on the master and there was 100 pages with the text box, and in the editing process 50 had their width changed to varying widths and later you decided you needed a 4"width— a simple script could loop through all the pages and reset the changed widths to match the master's new 4" width.

  • URGENT: Insert multiple rows in a view object cache from the same Page

    Please let me know whether I can get insert multiple rows in the same view object from a single page.
    I'm using UIX on Jdeveloper 9.0.5.2
    Thanks a lot.

    Hi,
    please check Duncan Mills how-to on this
    http://www.oracle.com/technology/products/jdev/tips/mills/JSP_Multi_Row_Edits.html
    Frank

  • How to access objects in the Child Form from Parent form.

    I have a requirement in which I have to first open a Child Form from a Parent Form. Then I want to access objects in the Child Form from Parent form. For example, I want to insert a record into a block present in Child Form by executing statements from a trigger present in Parent Form.
    I cannot use object groups since I cannot write code into Child Form to first create object groups into Child Form.
    I have tried to achieved it using the following (working of my testcase) :
    1) Created two new Forms TESTFORM1.fmb (parent) and TESTFORM2.fmb (child).
    2) Created a block named BLK1 manually in TESTFORM1.
    3) Created two items in BLK1:
    1.PJC1 which is a text item.
    2.OPEN which is a push button.
    4) Created a new block using data block wizard for a table EMPLOYEE_S1. Created items corresponding to all columns present in EMPLOYEE_S1 table.
    5) In WHEN-NEW-FORM-INSTANCE trigger of TESTFORM1 set the first navigation block to BLK1. In BLK1 first navigable item is PJC1.
    6) In WHEN-NEW-ITEM-INSTANCE of PJC1, code has been written to automatically execute the WHEN-BUTTON-PRESSED trigger for the "Open" button.
    7) In WHEN-BUTTON-PRESSED trigger of OPEN item, TESTFORM2 is opened using the following statement :
    open_form(‘TESTFORM2',no_activate,no_session,SHARE_LIBRARY_DATA);
    Since its NO_ACTIVATE, the code flows without giving handle to TESTFORM2.
    8) After invoking OPEN_FORM, a GO_FORM(‘TESTFORM2’) is now called to set the focus to TESTFORM2
    PROBLEM AT HAND
    ===============
    After Step 8, I notice that it passes the focus to TESTFORM2, and statements after go_form (in Parent Form trigger) doesnot executes.
    I need go_form with no_activate, similar to open_form.
    Edited by: harishgupt on Oct 12, 2008 11:32 PM

    isn't it easier to find a solution without a second form? If you have a second window, then you can navigate and code whatever you want.
    If you must use a second form, then you can handle this with WHEN-WINDOW-ACTIVATED and meta-data, which you have to store in global variables... ( I can give you hints if the one-form-solution is no option for you )

  • Exception Handling for many bean objects of a container class in a JSP page

    Hello,
    I have on container bean class. In this container class, there are several others class objects and the getter methods to get these objects out to the JSP pages.
    I have one JSP page which will use different objects in the container class object through the getter methods of the container class.
    My question is how to implement the exception handler for all the objects in the container so that the JSP page can handle all exceptions if occurrs in any object in the container?
    Please give me some suggestions. Thanks
    Tu

    Thanks for your reply.
    Since the container is the accessor class, I have no other super class for this container class, I think I will try the try catch block in the getter methods.

  • Help!! How do you keep objects in the same order in a 20 page doc when inserting a new object?

    I am creating a catalog of pictures only, as objects.
    They are organized alphabetically, 4 images per page as a 2x2 grid, for 20 pages.
    I want to insert a NEW object (image) in the middle of these 20 pages, and want all the objects after it to shift over one spot to make room.
    How do I get the objects after the inserted ones to shift, as text would if you inserted more text in the middle of a paragraph?
    I can't figure out how do do that (without just putting the images in a text box and in-line, but then I lose all the spacing controls)...
    Thank you!
    Lawrence

    ID ships with a free Image Catalog script in the sample scripts. You don't need to buy one.
    And that isn't going to do what you want, exactly. You'd have to re-run the script each time you add an image to make a new file, and you don't get to set the sort order yourself.

  • I am so frustrated.  I put ab object and/or a text box on a page and then cannot select it - the Text cursor (not pointer) is put on the object or text box and nothing happens.  It is so frustrating!  I then open up Everweb and the same thing,

    I put an object and/or a text box on a page and then cannot select it - the Text cursor (not pointer, just the text cursor shows) is put on the object or text box and nothing happens.  It is so frustrating!  I then open up Everweb and the same thing, I create an object and then try and elect it to make it bigger etc and cannot.  I know it must be something system wide as it happens in apps other than Pages.

    I put an object and/or a text box on a page and then cannot select it - the Text cursor (not pointer, just the text cursor shows) is put on the object or text box and nothing happens.  It is so frustrating!  I then open up Everweb and the same thing, I create an object and then try and elect it to make it bigger etc and cannot.  I know it must be something system wide as it happens in apps other than Pages.

  • View link creation on two view objects, and both view objects are populated program(not from sql)

    I have master and detail VO , both views data is loaded in program. Now for show/hide feature, I create View Link Object and using one element from both child and master VO , View Link Object created properly.
    But I can not able to add that view link object into AM.
    Now because of that , I cannot say what is a instance name of that view link object.
    Hence getting following error  -- Invalid or missing view link. Please attach view link with the bean.
    Please can you provide some directions.

    I have master and detail VO , both views data is loaded in program. Now for show/hide feature, I create View Link Object and using one element from both child and master VO , View Link Object created properly.
    But I can not able to add that view link object into AM.
    Now because of that , I cannot say what is a instance name of that view link object.
    Hence getting following error  -- Invalid or missing view link. Please attach view link with the bean.
    Please can you provide some directions.

  • Placing objects in Smart Cut Pro from Illustrator

    I know in CorelDraw, you can create a contour of the object, break it apart and place it into the cutting program and be able to cut out both shapes. I was wondering if it is possible to do something like that with an outlined object created in Illustrator. Also, can you just copy and paste an object into Smart Cut Pro from Illustrator?

    FCP has limited tools for this, because, after all, it is a NON-LINEAR EDITOR, not a compositing or visual effects program. And what you are trying to do falls squarely in that catagory.
    Shake, After effects...these are what you need to look for. And ROTOSCOPING...
    Shane

  • "COM object that has been separated from its underlying RCW cannot be used.

    I am constantly getting the following error when closing my app if we viewed/printed a report.  What do I need to do to correct this error?  For the following error, I opened my app, viewed a report on the screen using the 'CrystalReportViewer', closed the report viewer window, closed my app.  When closing the app, the following error occurs.
    CR version: 11.5.3300.0
    VB.NET v2.
    System.Runtime.InteropServices.InvalidComObjectException was unhandled
      Message="COM object that has been separated from its underlying RCW cannot be used."
      Source="mscorlib"
      StackTrace:
           at System.Runtime.InteropServices.UCOMIConnectionPoint.Unadvise(Int32 dwCookie)
           at CrystalDecisions.ReportAppServer.%. {(_ISCDClientDocumentEvents_OnClosedEventHandler  u)
           at CrystalDecisions.ReportAppServer.%.remove_OnClosed(_ISCDClientDocumentEvents_OnClosedEventHandler value)
           at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.DisconnectEventRelay()
           at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.  (Boolean  \b, Boolean       )
           at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Dispose(Boolean bDisposeManaged)
           at System.ComponentModel.Component.Dispose()
           at CrystalDecisions.CrystalReports.Engine.ReportDocument.  (Boolean      :)
           at CrystalDecisions.CrystalReports.Engine.ReportDocument.  (Boolean      ;)
           at CrystalDecisions.CrystalReports.Engine.ReportDocument.Close()
           at CrystalDecisions.CrystalReports.Engine.ReportDocument.
        (Object      >, EventArgs      ?)

    Hello,
    First thing is to install Service Pack 6 which you can get from the download page by clicking on BusinessObjests tab above and then downloads on the left...
    When you close your viewer be sure to add/have Youreportobject.close and Youreportobject.Dispose. Adding a GC.Collect may help also.
    Thank you
    Don

  • Accessing object of the main class from the thread

    Hi, I'm having problem accessing object of the main class from the thread. I have only one Thread and I'm calling log.append() from the Thread. Object log is defined and inicialized in the main class like this:
    public Text log;  // Text is SWT component
    log = new Text(...);Here is a Thread code:
    ...while((line = br.readLine())!=null) {
         try {
              log.append(line + "\r\n");
         } catch (SWTException swte) {
              ErrorMsg("SWT error: "+swte.getMessage());
    }Error is: org.eclipse.swt.SWTException: Invalid thread access
    When I replace log.append(...) with System.out.println(..) it works just fine, so my question is do the log.append(..) the right way.

    This is NOT a Java problem but a SWT specific issue.
    It is listed on the SWT FAQ page http://www.eclipse.org/swt/faq.php#uithread
    For more help with this you need to ask your question on a SWT specific forum, there is not a thing in these forums. This advice isn't just about SWT by the way but for all specific API exceptions/problems. You should take those questions to the forum or mailing list for that API. This forum is for general problems and exceptions arising from using the "core" Java libraries.

  • Object synchronization method was called from an unsynchronized block of co

    I have installed DotNETWebControlConsumer_3.0_sp1
    in my machine I am very much new to Plumtree
    I am building the application in vs 2005 or .Net 2.0 environment and plumtree 6.0
    here is my web.config file code
    <httpModules>
    <add type="Com.Plumtree.Remote.Loader.TransformerProxy, Plumtree.WCLoader, Version=3.0.0.0, Culture=neutral, PublicKeyToken=d0e882dd51ca12c5" name="PTWCFilterHttpModule"/>
    </httpModules>
    and I get the error Object synchronization method was called from an unsynchronized block of code
    I just removed the html format for posting purpose i mean all the less than and greater than sign
    please I need it so badly

    Regarding your first issue (because it looks as if you removed the <httpModules> node from your web.config to move on from that issue), I changed 'Aqualogic.WCLoader' to 'Plumtree.WCLoader' in <httpModules ../>, added a reference to Plumtree.WCLoader in my project , then added another <add assembly="Plumtree.WCLoaderyadayada...> accordingly to the <assemblies> node in the web.config and then it worked. Well, almost, now I'm seeing a new error:
    [NullReferenceException: Object reference not set to an instance of an object.]
    Com.Plumtree.Remote.Transformer.PTTransformer.HandleRequest(HttpContext ctx) in e:\buildroot\Release\wcfilter\3.0.x\filter\src\Com\Plumtree\Remote\Transformer\PTTransformer.cs:60
    Com.Plumtree.Remote.Transformer.PTTransformer.BeginRequestHandler(Object sender, EventArgs e) in e:\buildroot\Release\wcfilter\3.0.x\filter\src\Com\Plumtree\Remote\Transformer\PTTransformer.cs:54
    System.Web.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +92
    System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +64
    Mine is a .net 2.0 portlet that will work if I don't try to use the WCC 3.0SP1 (by pulling the <httpModules> node. But then I'm guaranteed no inline refresh. I have no fix yet, but when I do, I'll post it. I've contacted Plumtree Support in the meantime because others must be having the same problem.
    p.s. Also using edk 5.3 signed, though I'm going to upgrade to 5.4 and see if that does anything.

  • ERROR: ld.so: object '/usr/lib/libInternalSymbols.so' from LD_PRELOAD

    Hi DBA's
    I am getting the following error after cloning.
    But Cloning done successfully.
    When I run the application environment and services to start or stop i am getting the following error.
    ERROR: ld.so: object '/usr/lib/libInternalSymbols.so' from LD_PRELOAD cannot be preloaded: ignored.
    ERROR: ld.so: object '/usr/lib/libInternalSymbols.so' from LD_PRELOAD cannot be preloaded: ignored.
    ERROR: ld.so: object '/usr/lib/libInternalSymbols.so' from LD_PRELOAD cannot be preloaded: ignored.
    ERROR: ld.so: object '/usr/lib/libInternalSymbols.so' from LD_PRELOAD cannot be preloaded: ignored.
    ERROR: ld.so: object '/usr/lib/libInternalSymbols.so' from LD_PRELOAD cannot be preloaded: ignored.
    ERROR: ld.so: object '/usr/lib/libInternalSymbols.so' from LD_PRELOAD cannot be preloaded: ignored.
    ERROR: ld.so: object '/usr/lib/libInternalSymbols.so' from LD_PRELOAD cannot be preloaded: ignored.
    ERROR: ld.so: object '/usr/lib/libInternalSymbols.so' from LD_PRELOAD cannot be preloaded: ignored.
    ERROR: ld.so: object '/usr/lib/libInternalSymbols.so' from LD_PRELOAD cannot be preloaded: ignored.
    ERROR: ld.so: object '/usr/lib/libInternalSymbols.so' from LD_PRELOAD cannot be preloaded: ignored.
    ERROR: ld.so: object '/usr/lib/libInternalSymbols.so' from LD_PRELOAD cannot be preloaded: ignored.
    ERROR: ld.so: object '/usr/lib/libInternalSymbols.so' from LD_PRELOAD cannot be preloaded: ignored.
    ERROR: ld.so: object '/usr/lib/libInternalSymbols.so' from LD_PRELOAD cannot be preloaded: ignored.
    ERROR: ld.so: object '/usr/lib/libInternalSymbols.so' from LD_PRELOAD cannot be preloaded: ignored.
    ERROR: ld.so: object '/usr/lib/libInternalSymbols.so' from LD_PRELOAD cannot be preloaded: ignored.
    ERROR: ld.so: object '/usr/lib/libInternalSymbols.so' from LD_PRELOAD cannot be preloaded: ignored.
    ERROR: ld.so: object '/usr/lib/libInternalSymbols.so' from LD_PRELOAD cannot be preloaded: ignored.
    ERROR: ld.so: object '/usr/lib/libInternalSymbols.so' from LD_PRELOAD cannot be preloaded: ignored.
    ERROR: ld.so: object '/usr/lib/libInternalSymbols.so' from LD_PRELOAD cannot be preloaded: ignored.
    ERROR: ld.so: object '/usr/lib/libInternalSymbols.so' from LD_PRELOAD cannot be preloaded: ignored.
    ERROR: ld.so: object '/usr/lib/libInternalSymbols.so' from LD_PRELOAD cannot be preloaded: ignored.
    ERROR: ld.so: object '/usr/lib/libInternalSymbols.so' from LD_PRELOAD cannot be preloaded: ignored.
    ERROR: ld.so: object '/usr/lib/libInternalSymbols.so' from LD_PRELOAD cannot be preloaded: ignored.
    ERROR: ld.so: object '/usr/lib/libInternalSymbols.so' from LD_PRELOAD cannot be preloaded: ignored.
    ERROR: ld.so: object '/usr/lib/libInternalSymbols.so' from LD_PRELOAD cannot be preloaded: ignored.
    ERROR: ld.so: object '/usr/lib/libInternalSymbols.so' from LD_PRELOAD cannot be preloaded: ignored.
    ERROR: ld.so: object '/usr/lib/libInternalSymbols.so' from LD_PRELOAD cannot be preloaded: ignored.
    ERROR: ld.so: object '/usr/lib/libInternalSymbols.so' from LD_PRELOAD cannot be preloaded: ignored.
    ERROR: ld.so: object '/usr/lib/libInternalSymbols.so' from LD_PRELOAD cannot be preloaded: ignored.
    ERROR: ld.so: object '/usr/lib/libInternalSymbols.so' from LD_PRELOAD cannot be preloaded: ignored.
    Thanks,
    SG

    Hi Sawwan,
    What value should i give for LD_PRELOAD ? can you please tell me and I set the environment in .bash_profile as bellow.
    # .bash_profile
    # Get the aliases and functions
    if [ -f ~/.bashrc ]; then
    . ~/.bashrc
    fi
    # User specific environment and startup programs
    PATH=$PATH:$HOME/bin
    #export PATH
    unset USERNAME
    export LD_ASSUME_KERNEL=2.4.19
    export ORACLE_BASE=/s03/CLN
    export ORACLE_SID=CLN
    export ORACLE_TERM=xterm
    export NLS_LANG=AMERICAN
    export ORACLE_HOME=$ORACLE_BASE/clndb/10.2.4
    export LD_LIBRARY_PATH=$ORACLE_HOME/lib
    export PATH=$PATH:$ORACLE_HOME/bin
    export ORA_NLS10=$ORACLE_HOME/nls/data/9idata
    Thanks
    SG

  • Positioning quiz slide objects

    I am working on a Captivate 5 project with many quiz slides. The quiz slides were put into the project by someone else. I need to move the various quiz slide objects (submit button, back button, clear button, question text, review area, hint caption, and so forth).
    These objects need to be moved to the same position in all of the quiz slides. I've been moving these objects into place one by one and it is very tedious.
    Is there a way to set up a style to move all of these objects on all quiz slides at once?

    Each of the objects you mention on the quiz slide are a special type of object in Captivate.
    So although Object Styles do not allow you to specify the X and Y coordinates of an object, you CAN just move one of these objects on one slide to the location you want them all to be, and then go to the Position and Size accordion in the Properties tab (Transform accordion in Cp5.5), look for the small dropdown in the top right corner of the accordion, and choose the option to Apply to all items.
    The name is a bit misleading because it make you think this will actually apply the positioning setting to every item in the project.  But the fact is that it will only apply it to items OF THE SAME OBJECT TYPE. So although you would never do this for something like text captions in the main part of your project, you can safely do it for things like Submit, Clear, Back, and Next buttons in quiz slides because each of them are actually totally different object types as far as Captivate is concerned.
    Note also the option to Apply to all items of same style.  This means you can create custom styles and apply them to just certain buttons or captions if you only wanted SOME items to be positioned in a certain way, while all other items should retain their original positions.

Maybe you are looking for