At end of field

hi experts ,
i want to have a count for 2 fields in the internal table from standard table ...... table is edidc , for each mestyp there is a status ......... i m using following code to have a count of status field for each mestyp in another internal table
SORT ITAB2 BY I_MESTYP I_STATUS .
LOOP AT ITAB2 .
    V_COUNT = V_COUNT + 1 .
AT END OF I_STATUS .
    ITAB3-I_MESTYP = ITAB2-I_MESTYP .
    ITAB3-I_DOCNUM = ITAB2-I_DOCNUM .
    ITAB3-I_STATUS = ITAB2-I_STATUS .
    ITAB3-I_DIRECT = ITAB2-I_DIRECT .
    ITAB3-I_DATE   = ITAB2-I_DATE .
    ITAB3-I_COUNT = V_COUNT .
    APPEND ITAB3 .
    CLEAR V_COUNT .
ENDAT .
ENDLOOP .
LOOP AT ITAB3 .
WRITE :/ ITAB3-I_MESTYP ,
           ITAB3-I_DOCNUM ,
           ITAB3-I_STATUS ,
           ITAB3-I_DIRECT ,
           ITAB3-I_DATE ,
           ITAB3-I_COUNT .
ENDLOOP .
wat the problem is , i am getting the count of status irrespective of its mestyp
for eg .
matmas          26
matmas          26
matmas          26
z1228             29
z1228             29
zmat_trainee   29
zmat_trainee   29
the contents of itab3 should be
matmas           26      3
z1228              29      2
zmat_trainee    29      2
but its coming as
(**********)          26      3
(**********)          29      4
one more problem is there
the fields other than status & count in itab2 is getting changed to (* ) ....... if there is matmas then (****)
its happening after execution of
at end of i_status .
thanks in advance.

Hi,
some good information about that is available pressing F1 on the AT statement. And additionally this question is better asked in the abap forum, but anyway: the reason is that 'at end of', the cursor is already on the next row and so you might get incorrect values for the other fields. That's why they are displayed as '*'.
regards
Siggi

Similar Messages

Need to Make end customer field mandatory in sales order form.

I need to make end customer field mandatory when sales channel entered as some value...
for this i have used when validate record on order form
when i enter a value in sales channel as desired value the form is getting saved automatically and the field is getting mandatory
but my requirement is to make field mandatory and then to save the order.
let me know the sequence how it works if any one knows.

Sanni,
>
when i enter a value in sales channel as desired value the form is <b>getting saved automatically</b> and (then) the <b>field is getting mandatory</b>
but my requirement is to make field mandatory and then to save the order.
>
Which trigger are you using to do the "getting saved automatically'?
Does this trigger fire before the trigger that is making the field mandatory?
Regards,
PS: Is this an Oracle EBS query? If yes, this is the wrong forum
Edited by: Prabodh on Jun 14, 2012 4:48 PM

How to add two zeros end of field

how to add two zeros end of field?

Hi srinu,
If it's a number field, then just multiply by 100.
If it's a string, then just use CONCATENATE and add the '00' to your existing string.
Hope this helps.
SL

Small white cross on black square appears at end of field in form entry - how do I remove it?

Small white cross on black square appears at end of field in form entry - how do I remove it?

In Adobe Acrobat change the size of the text field.

Automatic tabbing at end of field in my dynpro

HI,
I want automatic tabbing at end of field for my dynpro field hours_start minutes_start hours_end minutes_end that are only of 2 char in dynpro.
E.g. i write 15102030 i want that automatically the dynpro field is
hours_start = 15
minutes_start = 10
hours_end = 20
minutes_end = 30
How can i move the cursor automatically when one of the field is completely filled?
I don't want set with ALT+F12 -> Option why I don't want change other programs.
Gustavo

Hi,
for example it can place the cursor in the next field after pressing ENTER, but so it's better to press TAB directly
You're right Max. However, in that case I would go with the ENTER. We can e.g. check in the PBO the length of each field in sequence, with STRLEN, and then set the cursor on the first incomplete field... This way the user only has to press enter to cycle through those fields and will stay on the same field until completely filled.
Well, kind of useless stuff I agree
Kr,
Manu.

AT SELECTION-SCREEN ON/END OF FIELD

Hi all,
     I want to know the exact difference between AT SELECTION-SCREEN ON field and AT SELECTION-SCREEN ON END OF field. Could you give me the answer with an example.
Sathish.

Hi,
Let`s say you have a radio button on your selection screen and you want to perform some action once the user clicks the radio button. You can attain this functionality by using AT SELECTION-SCREEN ON FIELD. This event block is raised before the AT SELECTION-SCREEN event, on action performed on that particular field.
"AT SELECTION-SCREEN ON END OF field",
Consider the following example :
AT SELECTION-SCREEN ON END OF <seltab>
event is triggered. This event block allows you to check the whole selection table <seltab>. Warning messages are displayed as dialog boxes, not in the status line.
AT SELECTION-SCREEN ON END OF CARRID.
LOOP AT MATNR.
    IF MATNR-HIGH NE '   '.
      IF MATNR-LOW IS INITIAL.
        MESSAGE Wxxx(MSG).
      ENDIF.
    ENDIF.
ENDLOOP.
Hope the info. is helpful, if so reward points.
Regards

End routine field not populated

Hi,
I have made the following end routine in order to populate the field YNEGOCIO with two characters.
I´m uploading data from DSO 0FIAR_O03 to customized DSO. When i activate this DSO i don´t see the field YNEGOCIO populated but the strange thing is that when i make a debbugg to the end routine, the result package-YNEGOCIO at the end of routine IS POPULATED with the correct values.
Can anybody help me with this?
LOOP AT RESULT_PACKAGE INTO e_s_result.
**Recover characters 14,15 from YNEGOCIO.
CLEAR lv_negocio.
           SELECT SINGLE
             /BIC/YYKEY
            FROM /BIC/AYSDLASPV00
            INTO lv_key
                WHERE
                  /BIC/YYVALUE EQ e_s_result-GL_ACCOUNT.
            IF sy-subrc EQ 0.
              MOVE lv_key+13(2) TO lv_negocio.
            ENDIF.
      LOOP AT gt_inv_gl9_doc INTO gs_inv_gl8_doc
        WHERE ac_doc_no = e_s_result-ac_doc_no.
* Calculate Importe Aplicado
        MOVE e_s_result to aux_s_result.
         aux_s_result-record = v_count + 1.
        IF aux_s_result-DEB_CRE_DC IS NOT INITIAL.
          aux_s_result-PROFIT_CTR = gs_inv_gl8_doc-profit_ctr.
          aux_s_result-USERNAME = gs_inv_gl8_doc-USERNAME.
          aux_s_result-deb_cre_dc = gs_inv_gl8_doc-DEB_CRE_DC.
          aux_s_result-/BIC/YI_WRBTR = gs_inv_gl8_doc-DEB_CRE_DC *
            aux_s_result-/BIC/YI_WRBTR / aux_s_result-DEB_CRE_DC.
          aux_s_result-/BIC/YNEGOCIO = lv_negocio.
          APPEND aux_s_result to e_t_result.
        ENDIF.
      endloop.
    endloop.
    REFRESH RESULT_PACKAGE.
    MOVE e_t_result[] TO RESULT_PACKAGE[].
Regards,
Diego

hi,
   check your changelog table and see data over there, i guess this situation generally happens when you do delta laod , itmight happening bcoz of two image are created which might be cancelling each other when request gets actiavted in DSO and also see for 0recordmode value.
hope it helps
regards
laksh

Deleting Zeros at the end of fields in ALV report

I want to make an ALV report that include both integer and decimals in same column.
for example :
1 - 1234.0000
2 - 0.0027
i dont want to see zeros at the end of value.
But the type will be decimal and integer values will be shown with zeros at the end.
For Ex.
I want to take report like this ;
1 - 1234
2 - 0.0027
How can i make this?
Thanks.
Edited by: aydnbk on May 14, 2010 3:22 PM

Hello aydnbk.
As far as i know, there is no way to do what you want using standard ALV-Functions. There is a field 'DECIMALS' in structure LVC_S_FCAT, but using this field you could only define ONE setting, that would affect ANY value.
Furthermore i am asking myself, if this feature is really sensible - when numbers are right-justified, a global setting for the number of decimals makes it much easier to compare the values - at least this is my personal opinion...
If i had to do this trick, i would simply add some character fields to the output-structure and write the values to the charater-fields to enforce this quite special layout.
Additionally i would set the fields 'NO_OUT' and 'TECH' for the fields of type 'P', that are holding the values - 'NO_OUT' hides the column and 'TECH' ensures, that the field can not be selected in a user-defined layout.
Hope this helps.
Regards, Jörg

At end of field, for dynamic internal table entries ?

Dear All,
I've data in my dynamic internal table.
But, to understand in a better way I created a test program with static entries.
Case 1 -->
DATA: BEGIN OF itab OCCURS 0,
        year TYPE char4,
        name TYPE char10,
      END OF itab.
DATA: BEGIN OF itab2 OCCURS 0 ,
        year TYPE char4,
        name TYPE char10,
        count TYPE i,
      END OF itab2.
DATA: gv_count TYPE i,
      gv_flag TYPE char1.
itab-name = 'AAAA'.
itab-year = '2008'.
APPEND itab.
CLEAR itab.
itab-name = 'AAAB'.
itab-year = '2008'.
APPEND itab.
CLEAR itab.
itab-name = 'AAAC'.
itab-year = '2008'.
APPEND itab.
CLEAR itab.
itab-name = 'AAAD'.
itab-year = '2008'.
APPEND itab.
CLEAR itab.
itab-name = 'BBBB'.
itab-year = '2007'.
APPEND itab.
CLEAR itab.
itab-name = 'BBBA'.
itab-year = '2007'.
APPEND itab.
CLEAR itab.
itab-name = 'BBBC'.
itab-year = '2007'.
APPEND itab.
CLEAR itab.
itab-name = 'BBBD'.
itab-year = '2007'.
APPEND itab.
CLEAR itab.
itab-name = 'CCCC'.
itab-year = '2006'.
APPEND itab.
CLEAR itab.
itab-name = 'CCCA'.
itab-year = '2006'.
APPEND itab.
CLEAR itab.
itab-name = 'CCCB'.
itab-year = '2006'.
APPEND itab.
CLEAR itab.
itab-name = 'CCCD'.
itab-year = '2006'.
APPEND itab.
CLEAR itab.
itab-name = 'CCCE'.
itab-year = '2006'.
APPEND itab.
CLEAR itab.
itab-name = 'CCCf'.
itab-year = '2006'.
APPEND itab.
CLEAR itab.
itab-name = 'DDDD'.
itab-year = '2005'.
APPEND itab.
CLEAR itab.
itab-name = 'DDDA'.
itab-year = '2005'.
APPEND itab.
CLEAR itab.
itab-name = 'DDDB'.
itab-year = '2005'.
APPEND itab.
CLEAR itab.
itab-name = 'DDDC'.
itab-year = '2005'.
APPEND itab.
CLEAR itab.
itab-name = 'DDDE'.
itab-year = '2005'.
APPEND itab.
CLEAR itab.
SORT itab BY year.
LOOP AT itab.
* Counter
gv_count = gv_count + 1.
AT END OF year.
    itab2-count = gv_count.
    MOVE-CORRESPONDING itab TO itab2.
    APPEND itab2.
    CLEAR gv_count.
    WRITE:/ itab2-name,
    itab2-year,
    itab2-count.
    CLEAR itab2.
    CLEAR gv_flag.
ENDAT.
ENDLOOP.
Now for the above program the Output is :
Name     Year          Count
********** 2005          5
********** 2006          6
********** 2007          4
********** 2008          4
" Forget about the asterisk values as it's an example !
The above output is correct, But in my real case the table structure is not like the above .
The order of the field are in reverse.
i.e. The internal table is like this :
Case 2 -->
DATA: BEGIN OF itab OCCURS 0,
        name TYPE char10,
        year TYPE char4,
      END OF itab.
DATA: BEGIN OF itab2 OCCURS 0 ,
        name TYPE char10,
        year TYPE char4,
        count TYPE i,
      END OF itab2.
In this case if I'm using at end of year the output is coming wrong.
Even on change of is also not working.
Request you guys to help me out so that I can achieve the same output as of case 1 with the table declaration as of CASE 2.
Regards,
Deepu.k

Hello Rich Heilman,
Again you came for my rescue ............
My code for this scenario is like this :
DATA: BEGIN OF itab OCCURS 0,
        name TYPE char10,
        year TYPE char4,
      END OF itab.
DATA: BEGIN OF itab2 OCCURS 0 ,
        name TYPE char10,
        year TYPE char4,
        count TYPE i,
      END OF itab2.
DATA: gv_count TYPE i,
      gv_flag TYPE char1.
itab-name = 'AAAA'.
itab-year = '2008'.
APPEND itab.
CLEAR itab.
itab-name = 'AAAB'.
itab-year = '2008'.
APPEND itab.
CLEAR itab.
itab-name = 'AAAC'.
itab-year = '2008'.
APPEND itab.
CLEAR itab.
itab-name = 'AAAD'.
itab-year = '2008'.
APPEND itab.
CLEAR itab.
itab-name = 'BBBB'.
itab-year = '2007'.
APPEND itab.
CLEAR itab.
itab-name = 'BBBA'.
itab-year = '2007'.
APPEND itab.
CLEAR itab.
itab-name = 'BBBC'.
itab-year = '2007'.
APPEND itab.
CLEAR itab.
itab-name = 'BBBD'.
itab-year = '2007'.
APPEND itab.
CLEAR itab.
itab-name = 'CCCC'.
itab-year = '2006'.
APPEND itab.
CLEAR itab.
itab-name = 'CCCA'.
itab-year = '2006'.
APPEND itab.
CLEAR itab.
itab-name = 'CCCB'.
itab-year = '2006'.
APPEND itab.
CLEAR itab.
itab-name = 'CCCD'.
itab-year = '2006'.
APPEND itab.
CLEAR itab.
itab-name = 'CCCE'.
itab-year = '2006'.
APPEND itab.
CLEAR itab.
itab-name = 'CCCf'.
itab-year = '2006'.
APPEND itab.
CLEAR itab.
itab-name = 'DDDD'.
itab-year = '2005'.
APPEND itab.
CLEAR itab.
itab-name = 'DDDA'.
itab-year = '2005'.
APPEND itab.
CLEAR itab.
itab-name = 'DDDB'.
itab-year = '2005'.
APPEND itab.
CLEAR itab.
itab-name = 'DDDC'.
itab-year = '2005'.
APPEND itab.
CLEAR itab.
itab-name = 'DDDE'.
itab-year = '2005'.
APPEND itab.
CLEAR itab.
SORT itab BY year.
LOOP AT itab.
* Counter
gv_count = gv_count + 1.
IF sy-tabix GT 1.
    ON CHANGE OF itab-year.
      itab2-count = gv_count.
      MOVE-CORRESPONDING itab TO itab2.
      APPEND itab2.
      CLEAR gv_count.
      WRITE:/ itab2-name,
      itab2-year,
      itab2-count.
      CLEAR itab2.
      CLEAR gv_flag.
    ENDON.
ENDIF.
ENDLOOP.
The Output is :
DDDC       2005          2
CCCf       2006          4
BBBD       2007          6
AAAD       2008          4
The above output is wrong.
Can u correct me where I'm doing wrong ?
Regards,
Deepu.K

Addition of Start & end date fields in the View 'My team's open leads' .

Dear all,
I want to add Lead Sart date & Expected End date in the personalize list of view 'My team's open Leads' in the Overview page of Lead management
I tried it by changing the field name in PDVField as LEAD_DATE_START/visibility=false ' for start date in the detailed view of I view ' 'My team's open leads'.But it is not reflecting in Personalize list of fields.
Can any body give solution to this ASAP as it is high priority requirement.
Maximum points would be rewarded for solution.
Regards,
Basavaraj V.Patil

Hi,
I have a similar problem. There appear to be some configurable attributes in the iview such as 'PDVField' and 'Column'. The PDVField attribute contains values such as 'QUAL_LEVEL_MAN_TXT/visibility=true'. When running the iview, this field is visible. However when I change this setting to false, the field is still visible. There is a PDVCachingOn field and this I have set to false however this also seems to make no difference.
Regarding the 'column' field, I have no idea what can be done here as the initial value is blank.
The suggestion in the post above requires customising the standard iView. That may be the case, but clearly the purpose of these 'configurable' attributes does not seem to be very clear.
Mr.T

In SharePoint Calendar lists, fields [Start Time] and [End Time] do not exist at the Site Column level.

<header style="box-sizing:border-box;color:#777777;line-height:1;font-size:13px;padding-right:46px;margin-bottom:3px;font-family:'Helvetica Neue', arial, sans-serif;">
</header>
I'm doing SP app development and have the following problem.
I need to check Start time and End Time in SharePoint Calendar using CAML query and then add a new event to Calendar list using the Start time and End Time that user has entered in 2 datapickers
in the form.
function AddCalendarListItems() {
var SD = document.getElementById("datepicker1").value;
var SThh = document.getElementById("St1").value;
var STmm = document.getElementById("St2").value;
var ED = document.getElementById("datepicker2").value;
var EThh = document.getElementById("Et1").value;
var ETmm = document.getElementById("Et2").value;
var T = document.getElementById("Title").value;
var S1 = SThh;
SD = SD.slice(6, 10) + "-" + SD.slice(0, 2) + "-" + SD.slice(3, 5) + "T" + SThh + STmm + ":00Z";
ED = ED.slice(6, 10) + "-" + ED.slice(0, 2) + "-" + ED.slice(3, 5) + "T" + EThh + ETmm + ":00Z";
//alert("SD= " + SD + " , ED= " + ED);
var siteUrl = SiteCollurl + "/SharePointApp11";
var clientContext = new SP.ClientContext(siteUrl);
var oList = clientContext.get_web().get_lists().getByTitle('Calendar');
var ListItemCInfo = new SP.ListItemCreationInformation();
var newEvent = oList.addItem(ListItemCInfo);
newEvent.set_item("Title", T);
newEvent.set_item("EventDate", SD);
newEvent.set_item("EndDate", ED);
newEvent.update();
clientContext.executeQueryAsync(Function.createDelegate(this, this.onQueryAddCalendarSucceeded2), Function.createDelegate(this, this.onQueryAddCalendarFailed2));
function onQueryAddCalendarSucceeded2(sender, args) {
alert("Success");
function onQueryAddCalendarFailed2(sender, args) {
alert('Add new item to the calendar failed. ' + args.get_message() + '\n' + args.get_stackTrace());
But I receive the following error:
Add new item to the Calendar failed. Column 'Start time' does not exist. It may have been deleted by another user.
I've checked and 'Start time' does exist. So it seems in SharePoint Calendar lists, field [Start Time] and [End Time] exist but do not exist at the Site Column level.
Please advise.

Hi Khojasteh,
Use “EventDate” for Start Time field, and “EndDate” for End Time field. They are the internal name of the two fields, you can check it in the column settings page url like “Field=EndDate”.
If it isn’t the issue, please debug the code, in which line the error occurs.
Thanks,
Qiao
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Qiao Wei
TechNet Community Support

Performance: reading huge amount of master data in end routine

In our 7.0 system, each day a full load runs from DSO X to DSO Y in which from six characteristics from DSO X master data is read to about 15 fields in DSO Y contains about 2mln. records, which are all transferred each day. The master data tables all contain between 2mln. and 4mln. records. Before this load starts, DSO Y is emptied. DSO Y is write optimized.
At first, we designed this with the standard "master data reads", but this resulted in load times of 4 hours, because all master data is read with single lookups. We redesigned and fill all master data attributes in the end routine, after fillilng internal tables with the master data values corresponding to the data package:
*   Read 0UCPREMISE into temp table
    SELECT ucpremise ucpremisty ucdele_ind
      FROM /BI0/PUCPREMISE
      INTO CORRESPONDING FIELDS OF TABLE lt_0ucpremise
      FOR ALL ENTRIES IN RESULT_PACKAGE
      WHERE ucpremise EQ RESULT_PACKAGE-ucpremise.
And when we loop over the data package, we write someting like:
    LOOP AT RESULT_PACKAGE ASSIGNING <fs_rp>.
      READ TABLE lt_0ucpremise INTO ls_0ucpremise
        WITH KEY ucpremise = <fs_rp>-ucpremise
        BINARY SEARCH.
      IF sy-subrc EQ 0.
        <fs_rp>-ucpremisty = ls_0ucpremise-ucpremisty.
        <fs_rp>-ucdele_ind = ls_0ucpremise-ucdele_ind.
      ENDIF.
*all other MD reads
ENDLOOP.
So the above statement is repeated for all master data we need to read from. Now this method is quite faster (1,5 hr). But we want to make it faster. We noticed that reading in the master data in the internal tables still takes a long time, and this has to be repeated for each data package. We want to change this. We have now tried a similar method, but now load all master data in internal tables, without filtering on the data package, and we do this only once.
*   Read 0UCPREMISE into temp table
    SELECT ucpremise ucpremisty ucdele_ind
      FROM /BI0/PUCPREMISE
      INTO CORRESPONDING FIELDS OF TABLE lt_0ucpremise.
So when the first data package starts, it fills all master data values, which 95% of them we would need anyway. To accomplish that the following data packages can use the same table and don't need to fill them again, we placed the definition of the internal tables in the global part of the end routine. In the global we also write:
DATA: lv_data_loaded TYPE C LENGTH 1.
And in the method we write:
IF lv_data_loaded IS INITIAL.
lv_0bpartner_loaded = 'X'.
* load all internal tables
lv_data_loaded = 'Y'.
WHILE lv_0bpartner_loaded NE 'Y'.
Call FUNCTION 'ENQUEUE_SLEEP'
EXPORTING
     seconds = 1.
ENDWHILE.
LOOP AT RESULT_PACKAGE
* assign all data
ENDLOOP.
This makes sure that another data package that already started, "sleeps" until the first data package is done with filling the internal tables.
Well this all seems to work: it takes now 10 minutes to load everything to DSO Y. But I'm wondering if I'm missing anything. The system seems to work fine loading all these records in internal tables. But any improvements or critic remarks are very welcome.

This is a great question, and you've clearly done a good job of investigating this, but there are some additional things you should look at and perhaps a few things you have missed.
Zephania Wilder wrote:
At first, we designed this with the standard "master data reads", but this resulted in load times of 4 hours, because all master data is read with single lookups.
This is not accurate. After SP14, BW does a prefetch and buffers the master data values used in the lookup. Note [1092539|https://service.sap.com/sap/support/notes/1092539] discusses this in detail. The important thing, and most likely the reason you are probably seeing individual master data lookups on the DB, is that you must manually maintain the MD_LOOKUP_MAX_BUFFER_SIZE parameter to be larger than the number of lines of master data (from all characteristics used in lookups) that will be read. If you are seeing one select statement per line, then something is going wrong.
You might want to go back and test with master data lookups using this setting and see how fast it goes. If memory serves, the BW master data lookup uses an approach very similar to your second example (1,5 hrs), though I think that it first loops through the source package and extracts the lists of required master data keys, which is probably faster than your statement "FOR ALL ENTRIES IN RESULT_PACKAGE" if RESULT_PACKAGE contains very many duplicate keys.
I'm guessing you'll get down to at least the 1,5 hrs that you saw in your second example, but it is possible that it will get down quite a bit further.
Zephania Wilder wrote:
This makes sure that another data package that already started, "sleeps" until the first data package is done with filling the internal tables.
This sleeping approach is not necessary as only one data package will be running at a time in any given process. I believe that the "global" internal table is not be shared between parallel processes, so if your DTP is running with three parallel processes, then this table will just get filled three times. Within a process, all data packages are processed serially, so all you need to do is check whether or not it has already been filled. Or are you are doing something additional to export the filled lookup table into a shared memory location?
Actually, you have your global data defined with the statement "DATA: lv_data_loaded TYPE C LENGTH 1.". I'm not completely sure, but I don't think that this data will persist from one data package to the next. Data defined in the global section using "DATA" is global to the package start, end, and field routines, but I believe it is discarded between packages. I think you need to use "CLASS-DATA: lv_data_loaded TYPE C LENGTH 1." to get the variables to persist between packages. Have you checked in the debugger that you are really only filling the table once per request and not once per package in your current setup? << This is incorrect - see next posting for correction.
Otherwise the third approach is fine as long as you are comfortable managing your process memory allocations and you know the maximum size that your master data tables can have. On the other hand, if your master data tables grow regularly, then you are eventually going to run out of memory and start seeing dumps.
Hopefully that helps out a little bit. This was a great question. If I'm off-base with my assumptions above and you can provide more information, I would be really interested in looking at it further.
Edited by: Ethan Jewett on Feb 13, 2011 1:47 PM

Can you create a user entered text field that flows content in a subform?

I am working on a conversion project taking a document library of over 600 forms from Word into PDF, for the most part it's simple and binding fields to the database schema and using subforms is working quite well - however, there are some instances where there is a combination of user entered fields mixed with database fields and in some cases the end user fields are all there are but the amount of content can vary from 250 characters to thousands. The project manager wants a PDF that enables users to enter whatever amount of text they need to and have the form layout function the way it does as if all fields were populated by the database - I don't know of a way to make that work unless content is entered in the schema first (or implement CM and have all users working in LiveCycle, but the database uses PDF, sothat's not an option right now).
If anyone has any ideas how to make these things work I would greatly appreciate hearing about it.
Thank you so much,
R

Hi,
    If you can post your form in the post, I can have a look at it and provide my feedback.
    I created a sample file for your reference..
    1) The Content property for the Page1 was set to Flowed.
    2) Each text box is placed inside a Subform which is also has the content property set to Flowed.
    3) In the Form Properties, under the Default tab, set the PDF render format as Dynamic XML form.
    4) In the Form Properties, under the Preview tab, set the Preview Type as "Interactive Form" and Preview Adobe XML Form as "Dynamic XML form". (this step is for the previewing the PDF in the designer).
    5) Finally save the form as Dynamic XML form. (File Menu -> Save As).
Hope this helps.
If you still have issues, please post your form..
Thanks
Srini
Please find the sample file at the below location
https://acrobat.com/#d=qQohvZGsJrky-sTdPTJbzA

Creating a Calendar View using alternative date fields

I have a Sharepoint 2007 calendar list that includes the standard Start and End Date fields. I also have "Suggested Start Date" and "Suggested End Date" fields that are utilized by users to recommend the Start and End Dates for
the event.
I can create a Calendar view that displays the events according to the Start and End dates.
I cannot create a Calendar view that displays the events according to the Suggested Start and Suggested End date fields.
In practice, all items are not displayed on this second calendar view that should be displayed even though you can choose these fields as Time Interval values when establishing the calendar.
Is there a way to create a Calendar View that will use date fields other than the default Start and End date fields?
Thanks,
Chris Mang>> JDA Software Group, Inc.

Hello,
It seems problem with time value. Have you included time value in custom datatime column wile creating? What happens when you select "date only" from column settings?
You can also try below suggestion to include "IncludeTimeValue" parameter in CAMl query by designer:
http://stackoverflow.com/questions/18362853/how-do-i-filter-by-today-and-time-in-sharepoint-list-view
OR else create two more calculated column and save date only in those columns then filter by them.
Hope it could help
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help

OIM 11g Modify User Profile for Updating End Date

Hi Gurus!
We have an OIM implementation where users may request the creation of other users by means of a Create User request template. In this template we set the End Date to be 3 months after the request date.
In order for the requester to extend the period of a user's OIM user account (along with its provisioned resources) we customized a Modify User Profile by displaying the End Date field and automatically populate it again to 3 months after the request date. Also we developed a custom event handler to enable the user when it is disabled and the End Date is updated to a future date.
This Modify User Profile is working great when the user is still enabled (the End Date is still in the future), however, when the End Date has passed (and the user is Disabled) the requester is not able to see the user when selecting the Modify User Profile request template.
Is there a way to allow requesters to also see disabled users in the Modify User Profile request template?
Thank you in advance.
Regards,

Hi Kevin,
thanks for your reply!
But, in this case, when the user is already disabled due to his End Date, how can a requester, through the Self Service TAB, enable it?
The Enable User request template does not work since when trying to enable the user, OIM sees the End Date is already passed and the DataSet validation throws an exception.
The only way I saw was providing a Modify User Profile Request template to change the End Date and developing a custom event handler to enable the user upon the extension of the End Date...
How can, in this situation, a requester enable the user and extend its End Date?
Thank you!
Regards,

At end of field

Similar Messages

Maybe you are looking for