Attach the whole form with XML data when Emailed

Hi all
I am new to Adobe Livecycle product. I have been using IBM workplace forms and now want to migrate to Adobe Forms. I want the whole completed PDF form to be attached along with the xml data in it when someone clicks the email button and email is sent. Currently when I am able to attach only the data part to the email.
Please advice on this...
Thanks
Ullas

The default email submit button is set up to send just the data/ If you drop a button object onto the form, set it to be a submit button, then use the mailto protocol to setup who you want to send it to. One of the button parameters allows you to choose what you want to submit. in your case choose PDF.

Similar Messages

PDF form with XML data connection comes up blank at run time

Hello All,
I am a newbie to ADOBE Livecycle 9, but am very proficient in C#. I would like to request for your guidance on the following issue.
We have a desktop application in C#, WPF, Sqlserver. The requirement is to launch a Livecycle form from the application for the user to read/edit/save data
I have done this much so far -
Downloaded trial version of Livecycle 9
Developed a interactive PDf form
Created an XML based data connection. Generated fields on the form using the fields from this connection.
Set the .XML file as preview source for the form
the controls on the form are boumd to the xml data source
In design mode, the form works fine, it displays my data correctly
I have created a WPF form with a button. On click of this button, I call the Process.Start(pdf-file-path). My pdf is launched properly
I have added a combo box to my WPF form. I select a parameter from this, then call a stored procedure which returns me a datatable depending on parameter passed
Using the returned datatable, I have used the datatable.writexml and datatable.writexmlschema to create my XML and XSD files. as mentioned above, this xsd is used to create the data connection for the PDF and the XML for the preview source
This is what I want to do -
Launch the PDF from my WPF form, pre-populated with the newly created XML data from my WPF form.
So basically, as the user changes the selection criteria from the combo box, the XML file data will change and the PDF file will be launched each time with new data.
The XSD format will always be constant
Problem -
My XML and XSD get created properly, my PDF launches, but it is empty
If I change my selection criteria and run the WPF application, and then open the PDF in design mode, it asks me whether it should refresh the XML source. This means that the PDF form is connecting correctly to the XML source
So why then, does the form come up empty at run time?
What link am I missing?
I have found some sites that help using Web applications, but nothing for desktop applications. It would be fantastic if you could point me to some help for developing Livecycle forms with C# / SQLServer
Your help in this case will be highly appreciated.
Thanks and Regards

Oops, something happended with the above post. I will try again... I have tried your suggestion but I still get the same garbled XML (with data repeated and some values "cut in half". Here is what I get after decode-service and extract-to-XML-service. This is just the first barcode, the others are similar, sorry for the poor formatting, but I get a CDATA tage infront of the "istensen" value. CDATA:istensen</fld_ForMellemEfterNavn ><fld_VejNRpostByEnLinie >Superroad 99, 1330 Supertown</fld_VejNRpostByEnLinie ><fld_PrivatTelefonnummer >20724283</fld_PrivatTelefonnummer ></sub_Person ></sub_PktA ><fld_BlanketNr >kb0371ff</fld_BlanketNr ><fld_BarcodeCount /></form1 >/sub_Adresse ><sub_Person ><fld_ForMellemEfterNavn>Kim Christensen</fld_ForMellemEfterNavn ><fld_VejNRpostByEnLinie > Superroad 99, 1330 Supertown </fld_VejNRpostByEnLinie ><fld_PrivatTelefonnummer >20724283</fld_PrivatTelefonnummer ></sub_Person ></sub_PktA ><fld_BlanketNr >kb0371ff</fld_BlanketNr ><fld_BarcodeCount /></form1 Obviously this is not a legal xml-string, so I can do nothing about it. I have tried using a custom .NET component (ClearImage) for reading the same form (with the barcode) I get the correct data out from the barcodes. So I guess something is wrong with the decode-service in Barcoded Forms ES when I use compressed XML. But I can conclude since the ClearImage component can read the barcodes that they are compressed correctly. Can you help me with getting further with this problem? Sincerely Kim

Barcoded form with XML-data

Hi all,
In our solution we have some barcodes on a form (7 barcodes on the one that I am using), they contain compressed XML data (I know that this uses much space in the barcode - anyway it should work regardless of this).
What the interesting thing is what is returned from the "decode-service" in WB.
When I run a scanned form through the process I have created I get "garbled" xml in my XML-doc that is returned from the decode-service.
If I use a handheld scanner (with a customly created program that handles the compression) I get the correct data from the barcode.
If I do not use compression in the barcode I get the correct XML data from the barcode (with the decode-service). This is weird to me... What is going on???
Some time ago I posted this issue (http://www.adobeforums.com/webx?128@@.3c058293) but never really caught up with a solution.
Can you help me with this?
Sincerely
Kim

Oops, something happended with the above post. I will try again... I have tried your suggestion but I still get the same garbled XML (with data repeated and some values "cut in half". Here is what I get after decode-service and extract-to-XML-service. This is just the first barcode, the others are similar, sorry for the poor formatting, but I get a CDATA tage infront of the "istensen" value. CDATA:istensen</fld_ForMellemEfterNavn ><fld_VejNRpostByEnLinie >Superroad 99, 1330 Supertown</fld_VejNRpostByEnLinie ><fld_PrivatTelefonnummer >20724283</fld_PrivatTelefonnummer ></sub_Person ></sub_PktA ><fld_BlanketNr >kb0371ff</fld_BlanketNr ><fld_BarcodeCount /></form1 >/sub_Adresse ><sub_Person ><fld_ForMellemEfterNavn>Kim Christensen</fld_ForMellemEfterNavn ><fld_VejNRpostByEnLinie > Superroad 99, 1330 Supertown </fld_VejNRpostByEnLinie ><fld_PrivatTelefonnummer >20724283</fld_PrivatTelefonnummer ></sub_Person ></sub_PktA ><fld_BlanketNr >kb0371ff</fld_BlanketNr ><fld_BarcodeCount /></form1 Obviously this is not a legal xml-string, so I can do nothing about it. I have tried using a custom .NET component (ClearImage) for reading the same form (with the barcode) I get the correct data out from the barcodes. So I guess something is wrong with the decode-service in Barcoded Forms ES when I use compressed XML. But I can conclude since the ClearImage component can read the barcodes that they are compressed correctly. Can you help me with getting further with this problem? Sincerely Kim

Populating a PDF form with XML data

Hi folks,
I would like to create some pdf form template, populate it with xml data and output from it a pdf file.
Can I do such thing using LiveCycle?
Yair

With the recent release Adobe changed the name to Adobe Digitial Enterprise Platform (ADEP)..
http://www.adobe.com/solutions/customer-experience/enterprise-platform.html
ADEP server software comes with lot of services to help with many solutions for the enterprises, so it would be better to call the Adobe Sales team and discuss your needs and they will be best people to suggest what suits your company requirements.
Thanks
Srini

Populate PDF form with XML data

Although a seemingly simple task, this question has occupied way too much of my time the last week and I am asking the following out of sheer desperation and frustration.
I have a pdf form created with Designer 7.0. I have a separate XML data file to populate the form with. I can test using the preview in Designer and everything looks great. Now, all I want to do is deploy this pdf to a standard web server (IIS, Windows) such that any visitor to the site (using Reader) is able to open it/view it/print it, with the data there. That's it.
This was easily accomplished using Acrobat 6 by creating an ASP page that output an FDF file which referenced the PDF. Not so with the latest version.
I have downloaded three separate several hundred page documents that do not explain how to accomplish this task simply. So to summarize:
1. Does this task *require* a separate piece of software (Document Server) that was not required before?
2. If Document Server is not required, what are the steps to publish the pdf file and reference the data file?
Please help, extraordinarily frustrated :-(.

Ravinder, were you actually able to get your PDF Document (Form) to load with data? I have not been able to get my .NET page to populate my PDF document - the PDF loads in my Browser but has no data. If you can post sample code that you were able to get to work, it would be appreciated, or if you notice something wrong with my code below, please let me know. Also, when my PDF document loads in my browser, I am prompted to "Open or Save" my .xdp file and if I click "Open", my PDF Form loads, but the fields are not populated. How do I stop this prompt from loading? I don't want the user(s) to be able to see this. My .NET page and XML file are listed below: ------------------------- .NET ----------------------------------- Imports System.Text Imports System.IO Public Class WebForm1 Inherits System.Web.UI.Page #Region " Web Form Designer Generated Code " 'This call is required by the Web Form Designer. <System.Diagnostics.DebuggerStepThrough()> Private Sub InitializeComponent() End Sub 'NOTE: The following placeholder declaration is required by the Web Form Designer. 'Do not delete or move it. Private designerPlaceholderDeclaration As System.Object Private Sub Page_Init(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Init 'CODEGEN: This method call is required by the Web Form Designer 'Do not modify it using the code editor. InitializeComponent() End Sub #End Region Private Sub Page_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load 'Put user code to initialize the page here Dim responseString As New StringBuilder Dim sr As StreamReader Dim xmldata As String Response.ContentType = "application/vnd.adobe.xdp+xml" responseString.Append("<?xml version='1.0' encoding='UTF-8'?>") responseString.Append("<?xfa generator='AdobeDesigner_V7.0' APIVersion='2.2.4333.0'?>") responseString.Append("<xdp:xdp xmlns:xdp='http://ns.adobe.com/xdp/'>") responseString.Append("<xfa:datasets xmlns:xfa='http://www.xfa.org/schema/xfa-data/1.0/'>") responseString.Append("<xfa:data xfa:dataNode='dataGroup'>") sr = File.OpenText("c:\\inetpub\\wwwroot\\PDFFiller\\TestForm_data.xml") xmldata = sr.ReadToEnd() sr.Close() responseString.Append(xmldata) 'responseString.Append("<form1>") 'responseString.Append("<txtFirstName>Homer</txtFirstName>") 'responseString.Append("<txtLastName>Simpson</txtLastName>") 'responseString.Append("</form1>") responseString.Append("</xfa:data>") responseString.Append("</xfa:datasets>") responseString.Append("<pdf href='http://localhost/PDFFiller/TestForm.pdf' xmlns='http://ns.adobe.com/xdp/pdf/' />") responseString.Append("<xfdf xmlns='http://ns.adobe.com/xfdf/' xml:space='preserve'>") responseString.Append("<annots/>") responseString.Append("</xfdf>") responseString.Append("</xdp:xdp>") Response.Write(responseString) Response.Flush() Response.End() End Sub End Class ----------------------End .NET ----------------------------------- --------- XML (TestForm_data.xml) -------------------------------- <form1><txtFirstName>Homer</txtFirstName><txtLastName>Simpson</txtLastName></form1> ----------------------End XML -----------------------------------

Filling PDF Form with XML data file

Hello everybody.
I need help.
I created a form with LiveCycle Designer. I filled it and generated a XML data files. Now, I would like to fill the same blank PDF form with this XML data file.
I know that I can do it with Adobe 8.0 but I must do it in an C# / .NET application that I have to create.
(Forms I'm creating are not for me, I create the forms. Client uses them form but he don't have Adobe Acrobat 8.0, so he can't realise the automatic PDF filling with Adobe Acrobat 8.0)
So I am looking for help with ".NET" "COM" or other library to help me to do it. If someone has other idea just give it.
Thanks for your reply
Jean Pierre (sorry for my bad English)

Hello Mike
Thank's for your reply. I used XPAAJ and it works very well but my company his develloping software with C# langage.
I tried to convert XPPAJ to C#, I did it with the Java Langage Conversion Assistant but "Adobe Library" included in jar files cannot be translated to C#/.NET library. So, I can't use it.
I found some C#/.NET API on the NET but they are very expensive and my company don't want to pay. They want me to create my own solution with library given by Adobe when you buy Adobe 8. So I am looking for this library.
Is there an Adobe LiveCycle Designer SDK to help me.
Thank you in advance for your reply
Jean Pierre (student developing with LiveCycle Designer)

Repeating sub-form with XML data from aspx page

Hi, I am doing a POC where I have a repeating subform in my Life cycle form. Now I want it to show data based on the XML that I have written, sample is below. My problem is that the sub-form does not repeat. Can you help me with this problem or if you can let me know your experience if this is possible that would be great. Thanks, Manish strXML = "<?xml version='1.0' encoding='UTF-8'?>"; strXML = strXML + "<?xfa generator='AdobeDesigner_V7.0' APIVersion='2.2.4333.0'?>"; strXML = strXML + "<xdp:xdp xmlns:xdp='http://ns.adobe.com/xdp/'>"; strXML = strXML + "<xfa:datasets xmlns:xfa='http://www.xfa.org/schema/xfa-data/1.0/'>"; strXML = strXML + "<xfa:data>"; strXML = strXML + "<RepeatForm>"; strXML = strXML + "<emp>name</emp>"; strXML = strXML + "</RepeatForm>"; strXML = strXML + "<RepeatForm>"; strXML = strXML + "<emp>name1</emp>"; strXML = strXML + "</RepeatForm>"; strXML = strXML + "</xfa:data>"; strXML = strXML + "</xfa:datasets>"; strXML = strXML + "<pdf href='http://servername/projectname/filename.pdf' xmlns='http://ns.adobe.com/xdp/pdf/' />"; strXML = strXML + "</xdp:xdp>";

hi this is a sample i created for this check out this link
http://anilmathewm.blogspot.com/2010/07/how-to-post-data-from-flash-to-php-or.html

Prepopulating Interactive Form with XML Data using VBA

I have an excel spreadsheet with data on it. I need to click on a button that will cause an Interactive PDF form to open and be populated with data from the spreadsheet. To do this I want to use an XML data file. I know how to create the file, but how do I cause the PDF to open in Adobe Reader with the XML data file using VBA? The link needs to be a soft link, in that the name of the XML file could change.
Many thanks for answers.

 strXFDFFile = "c:\temp\" & strFileName & "tmp.xfdf"
 'Open the PDF file
 appPDFInit = True
 Status "Processing " & strFileName
 DoEvents
 ' Create PDF File, if any
 If strXFDFFile <> "" Then
 Dim fldValue As String
 Open strXFDFFile For Output As #1
 Print #1, "<?xml version=""1.0"" encoding=""UTF-8""?>"
 Print #1, "<xfdf xmlns=""http://ns.adobe.com/xfdf/"" xml:space=""preserve"">"
 Print #1, "<f href=""" & strFilePath & strFileName & """/>"
 Print #1, "<fields>"
 For Each fdField In rsData.Fields
 If IsNull(fdField.Value) Then
 fldValue = ""
 Else
 fldValue = fdField.Value
 fldValue = XMLit(fldValue)
 End If
 If InStr(1, fdField.Name, "ID") > 0 Then
 fldValue = Format(fldValue, "##########")
 End If
 If InStr(1, fdField.Name, "ZIP") > 0 Then
 fldValue = Format(fldValue, "#####")
 End If
 If InStr(1, fdField.Name, "Rate") > 0 Then
 fldValue = Format(fldValue, "#0.00#")
 End If
 ' Write #1, fdField.Name,
 Print #1, "<field name=""" & fdField.Name & """>"
 Print #1, "<value>" & fldValue & "</value>"
 Print #1, "</field>"
 Next
 Print #1, "</fields>"
 Print #1, "</xfdf>"
 Close #1
 End If
 Dim x As Long
 For x = 1 To 1000000: Next x
 LaunchPDF.LaunchFile strXFDFFile, 0, 2
Make sure you reference the Adobe Acrobat Browser Control Library under Tools | References
It will merge to Adobe Reader. Note that I have made the strXFDFFile variable unique by including the name of the PDF file. This assures that you can merge to more than one PDF at a time (this is taken from a loop for multiple PDF files). Note that the XFDF file must include the path and the PDF file name in order to open the correct PDF for merging.
I don't have time to explain the code, but if you have any questions let me know.
Daniel H. Smith
Smith Enterpises LLC

About the exporting and importing xml data file in the pdf form

Hi all,
I need help for importing xml data file in the pdf form. When I write some thing in the text field with fill color and typeface (font) and exported xml data using email button. When I imported that xml file in the same pdf file that is used for exporting the xml data then all the data are shown in the control but not color and font typeface. Anyone has suggestion for solving this problem. Please help me for solving this problem.
Thank you
Saroj Neupane

Can you post a sample form and data to [email protected] and I will have a look.

Update a system form with XML: empty screen when this is a target document.

Hi,
It is possible to update a system form with an xml file.
In the UI_Application.LoadBatchActions(xmlDoc). In the xmldocuemnt I update a system form by adding controls on it. This all works fine, except one (big) problem.
Assume that I Alter the 'Good Receipt PO'.
This document can be the target document of a Purchase order document. When you open a PO and click the icon on the toolbar for going to the target document, you see the target document filled in, in OK (view) mode.
When you alter the 'Goods Receipt PO' form with XML you get an empty goods receipt form, in Add mode.
Is this a known problem, how can I solve it?
Thanks in advance
Eddy

Hi Florian,
The XML looks like:
<?xml version="1.0" encoding="UTF-16"?>
<Application>
 <forms>
 <action type="update">
 <form AutoManaged="1" BorderStyle="0" FormType="143" ObjectType="20" SupportedModes="15" appformnumber="143" client_height="424" client_width="570" color="0" default_button="1" height="458" left="207" mode="3" pane="1" title="Goederenontvangst (bestelling)" top="23" type="0" uid="F_233" visible="1" width="578">
 <items>
 <action type="add">
 <item AffectsFormMode="1" backcolor="-1" description="" disp_desc="0" enabled="1" font_size="0" forecolor="-1" from_pane="0" height="19" left="434" linkto="" right_just="0" supp_zeros="0" tab_order="830" text_style="0" to_pane="0" top="398" type="4" uid="100001" visible="1" width="85">
 <AutoManagedAttribute>
 <Attribute description="editable" id="2" modeAdd="1"/>
 </AutoManagedAttribute>
 <specific caption="Container"/>
 </item>
 </action>
 <action type="update">
 <item AffectsFormMode="1" backcolor="-1" description="" disp_desc="0" enabled="1" font_size="0" forecolor="-1" from_pane="0" height="19" left="315" linkto="2" right_just="0" supp_zeros="0" tab_order="1160" text_style="0" to_pane="0" top="398" type="4" uid="68" visible="1" width="114">
 <AutoManagedAttribute>
 <Attribute description="editable" id="2" modeAdd="1"/>
 </AutoManagedAttribute>
 <specific caption="Voorfactuur"/>
 </item>
 </action>
 </items>
 </form>
 </action>
 </forms>
</Application>
Thank you very much for trying this.
Eddy

I'VE CREATED A FORM WITH IMAGES. WHEN I OPEN THE FILE IN ACROBAT READER, THE IMAGES ARE BALCK BOXES!

I'VE CREATED A FORM WITH IMAGES. WHEN I OPEN THE FILE IN ACROBAT READER THE IMAGES ARE BLACK BOXES.
THE FORM HAs (extend features to acrobat reader). THE FORM WAS DISTRIBUTED.
NON OF MY EMPOYEES CAN SEE THE IMAGES. WHAT'S WRONG? CAN YOU HELP?

However, the view large images is an issue for a form that is being distributed. Either a note needs to be added to the PDF to tell how to enable the view or the images need to be changed so that the enabling is not needed.

My I phone has plenty of storage but will not download any apps free or paid for when I press install the installation symbol appears briefly and then the page reverts to the original form with the price or free on the right hand side.

My I phone has plenty of storage but will not download any apps free or paid for when I press install the installation symbol appears briefly and then the page reverts to the original form with the price or free on the right hand side.

Call 1-800-275-2273...ask to talk to "Customer Relations"...no one else.
Good luck.

Want to print the whole month with or without overtime for each employee

Hi,
I have Oracle forms/reports10g R2, Below query returns employee overtime correctly but I want to add the whole month with it in simple words if one employee have overtime for five days in a month I want the query to return the whole month including five overtime days for each employee and let say if we have ten employees query return whole month for each employee either he have or overtime or not how can I implement this in report it becomes agony for me, anyone please suggest a solution.
Thanks and regards, Khawar.
---Query---
select o.ot_date , o.start_dt_time as start_time, o.end_dt_time as end_time, o.ot_details, et.holiday, et.staff_id, e.staff_name, e.desig
from overtime o, emp_ot et, employee e
where o.complain_no = et.complain_no
and o.inc_type_code = et.inc_type_code
and et.staff_id = e.staff_id
order by 1, 2, 3, e.staff_id

Hi Michael,
Thanks for reply, I think I didn't explain as I should, I want to print Overtime report for each employee let say employee A123 did overtime for five days in DEC than what I want is to print report for employee A123 for the whole month means when I print report blank cell should come where A123 don't have data (I mean other 25/26 days).
The structure of tables are as
SQL> desc overtime
Name Null? Type
COMPLAIN_NO NOT NULL NUMBER(5)
OT_DATE NOT NULL DATE
START_DT_TIME NOT NULL DATE
INC_REF_NO NUMBER(5)
END_DT_TIME NOT NULL DATE
INC_TYPE_CODE NOT NULL VARCHAR2(10)
DISTRICT_CODE VARCHAR2(6)
BUSBAR_VOL VARCHAR2(5)
OT_DETAILS VARCHAR2(2000)
SQL> desc EMP_OT
Name Null? Type
STAFF_ID NOT NULL VARCHAR2(8)
COMPLAIN_NO NOT NULL NUMBER(5)
INC_TYPE_CODE NOT NULL VARCHAR2(10)
HOLIDAY NUMBER
Each employee associated with primary key i.e COMPLAIN_NO and INC_TYPE_CODE
in each OVERTIME table record we may have more than one employee in EMP_OT table.
above detail may clear my query.
Thanks and Regards,
Khawar.

Merge LiveCycle Form with XML using JAVA

Hello.
I am trying to find out how to merge non-interactive form with XML (using JAVA) so the users can see the final output form with the data filled in.
What are my choices..?
So far, I have created the interactive forms as template using LiveCycle 8 and wrote ASP.NET code to extract data and store it in SQL database when the user fill out and submit the form.
It works great but another agency wants to access the form as well.
They told us that they will create the XML themselves from the database, so they just need to combine the form with XML to display it (non-interactive form).
They want to use JAVA but I am not sure how to do that...
Any suggestion?

Assuming that you start with XML in an org.w3c.dom.Document that stores the XML data. Before you can merge it into a form, you have to convert it to a com.adobe.idp.Document object. TO convert a org.w3c.dom.Document to a com.adobe.idp.Document object -- use the following Java code:
private Document convertDataSource(org.w3c.dom.Document myDOM)
byte[] mybytes = null;
try
//Create a Java Transformer object
TransformerFactory transFact = TransformerFactory.newInstance();
Transformer transForm = transFact.newTransformer();
//Create a Java ByteArrayOutputStream object
ByteArrayOutputStream myOutStream = new ByteArrayOutputStream();
//Create a Java Source object
javax.xml.transform.dom.DOMSource myInput = new DOMSource(myDOM);
//Create a Java Result object
javax.xml.transform.stream.StreamResult myOutput = new StreamResult(myOutStream);
//Populate the Java ByteArrayOutputStream object
transForm.transform(myInput,myOutput);
// Get the size of the ByteArrayOutputStream buffer
int myByteSize = myOutStream.size();
//Allocate myByteSize to the byte array
mybytes = new byte[myByteSize];
//Copy the content to the byte array
mybytes = myOutStream.toByteArray();
catch (Exception e) {
System.out.println("The following exception occurred: "+e.getMessage());
//Create a com.adobe.idp.Document object and copy the
//contents of the byte array
Document myDocument = new Document(mybytes);
return myDocument;
THen you can merge myDocument into the Form using renderPDFFOrm:
FormsResult formOut = formsClient.renderPDFForm(
formName, //formQuery
myDocument, //inDataDoc
pdfFormRenderSpec, //PDFFormRenderSpec
uriValues, //urlSpec
fileAttachments //attachments
Hope this helps!

Problem on refreshing with XML Data Connection

Hi all,
I have just created a Xcelcius 2008 interface which is consuming data from XML Data connection that I created using an ASPX web form (webservices). On Xcelsius 2008, I set to refresh the data on every 30 seconds.
And I have found problem that the Xcelsius 2008 refresh XML Data intermittently. It doesn't want to refresh the latest data, and it still shows the previous data. But the strange thing is when I open the web services to check the validity of the data, the xcelsius is able to update and show the data exactly same with the opened data that I checked.
And next, I repeatly refrehsed my browser (F5), oddly, the Xcelsius Flash reload data, and when I stop to refresh it. The Xcelsius stop to refresh the data also.
So what happen to this Xcelsius? Any solutions?
Regards,
Devin Wood

Hi Devin,
I am also facing the same problem, what codes you exactly use to control the cache. I have used the following but getting same old data.
Response.Cache.SetExpires(System.DateTime.Now);
                    Response.CacheControl = "no-cache";
                    Response.AddHeader("Pragma", "no-cache");
                    Response.AddHeader("Pragma", "no-store");
                    Response.AddHeader("cache-control", "no-cache");
                    Response.Cache.SetCacheability(HttpCacheability.NoCache);
                    Response.Cache.SetNoServerCaching();
Hope to get help from you.
Regards
Bikram

Attach the whole form with XML data when Emailed

Similar Messages

Maybe you are looking for