Attaining PDF version 1.3 using Crystal Reports 10.5

Hi,
I'm using VS 2008 for a Web Application. I'm generating Reports using Crystal version 10.5. When I export the Report to PDF I'm getting PDF version 1.2. I'm using Windows 7 and my PDF Viewer software is Adobe Acrobat 9.0. Kindle Suggest me how to attain PDF version 1.3 using Crystal Reports 10.5
Thanks & Regards,
Karthik Sivakumar.

Hello,
For backward compatibility CR 10.5 exports to 1.2. There is no control over the version of PDF CR exports to in any version.
But this would be a great feature, add your suggestion to Idea place as an enhancement request.
Thank you
Don

Similar Messages

Total No of pages different in report printed using Crystal Report XI R2 vs SAP Crystal Reports, developer version for Microsoft Visual Studio (File Version 13.8)

Currently in our application, we are using Crystal Report XI R2 for generating the reports. We are in the process of upgrading the Crystal Report to SAP Crystal Reports, developer version for Microsoft Visual Studio (File Version 13.8). I updated that on my machine and all the reports work fine. I didn't have to modify any of the reports.
However when comparing the reports, we found that there are few reports on which the total no. of pages differ from the report displayed using Crystal Report XI R2 vs SAP Crystal Reports, developer version for Microsoft Visual Studio (File Version 13.8). Comparing the reports, it looks all the data that were fit on one page earlier with version XI R2 doesn't fit on the same page with version 13.8, thereby increasing the page counts.
The fonts, page margins everything set on report itself. Nothing being set in the code.
Both the application is using the same report that is pulling the data from the same database. Our application is a web application.
Any suggestion, why this is happening.
Thanks.
Sanjay

I am not sure what is being compared here?
CRXI R2 designer to CRVS?
CR XI R2 in some version of .NET to CRVS?
CR XI R2 using RDC SDK to CRVS?
Also, is this happening on your development computer or after you deploy?
If you compare the the "Page setup" options dialog between reports that work and those that do not work, do you see any difference?
Is this a web or a win app?
Are you seeing the same issue when viewing and exporting - say export to PDF?
What is the printer driver used and it's version?
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

Error when use Crystal report Bundled Version with Vs2003 on Windows Vista

Post Author: MartinoLuccarelli
CA Forum: .NET
Hi, I have developed a software with Vs2003 that uses Crystal report Bundled Version. I have created a Installation package that include the merge modules, and i have entered the Licence Key for Crystal_regWiz2003 module. If i install and use the software in the computer with XP or Windows 2000 I do not have problems. But when i install the software on the PC with Windows Vista i have this error when the probram show a report "Operazine di Crystal Report non Riuscita perche' non e' stato possibile ottenere una licenza gratuita nel tempo allocato" Thank's

Uninstall CRVS2010 that you currently have installed.
To remove the assemblies from the GAC use gacutil. Google will get you a number of links on how to. Also, see the KB [1535325 - How to remove CRVS2010 Beta 2|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333533333335333333323335%7D.do].
Reinstall CRVS2010 SP1 from here:
SAP Crystal Reports, developer version for Microsoft Visual Studio: Updates & Runtime Downloads [original link is broken]
- Ludek

Using Crystal Reports version 8.5

Hi,
    I am using legaly Visual Studio 2008 Professional Edition and Crystal Reports Basic for VS 2008 for software developing and reporting.
    My client usees a third party software with reports designed in Crystal Reports 8.5 and I have to create new reports for that application. My client has Crystal Reports 8.5 Runtime installed. I tested, if I install Cristal Reports 2008 Runtime for my new reports, the other reports in 8.5 version is not work correctly. The migration of the existing reports to new version of Crystal Reports is not possible.
    My questions are:
    1. I can legaly use Cristal Reports 8.5 developer software if I have Crystal Reports Basic for Visual Studio .NET 2008?
    2. If I can, please tell me a link to download Crystal Reports 8.5.
    3. Can I install Crystal Reports 2008 Runtime and Crystal Reports 8.5 Runtime on same computer and all the reports, designed in the two versions of Crystal Reports, to work correctly?
Thank you!

OK. this post turned out to be longer than I intended, but I hope it clarifies your situation and options.
I am not sure what you mean when you say:
I tested, if I install Cristal Reports 2008 Runtime for my new reports, the other reports in 8.5 version is not work correctly.
But here is a stab at an answer; Reports created in Crystal Reports Basic for Visual Studio .NET 2008, can not be run by CR 8.5 as the file format is too different and CR 8.5 does not understand it.
Next time, it will be helpful to describe what is happening. Saying "...not work correctly" is pretty lame.
A few things I want to clarify:
I can legally use Crystal Reports 8.5 developer software if I have Crystal Reports Basic for Visual Studio .NET 2008?
- Yes, you can. What AG meant to say was that CR 8.5 can not / should not be used in .NET. Not tested, not supported. But you can install CR 8.5 and it will live quite happily side by side with Crystal Reports Basic for Visual Studio .NET 2008
If I can, please tell me a link to download Crystal Reports 8.5.
- Not sure what you are asking for. CR 8.5 had to be purchased. As it has been out of support for over 10 years now, you can not purchase it any more.
Can I install Crystal Reports 2008 Runtime and Crystal Reports 8.5 Runtime on same computer and all the reports, designed in the two versions of Crystal Reports, to work correctly?
CR 8.5 and Crystal Reports Basic for Visual Studio .NET 2008 will work side by side fine. However as I mentioned above, reports created in Crystal Reports Basic for Visual Studio .NET 2008 will not work with CR 8.5. Reports created in CR 8.5 will work in Crystal Reports Basic for Visual Studio .NET 2008.
Another point. I notice you say:
Crystal Reports 2008 Runtime
Very careful there as there is Crystal Reports 2008 (v 12.x) and the runtime would be Crystal Reports 2008 Runtime. There is a version of CR that bundles with VS 2008 (Crystal Reports Basic for Visual Studio .NET 2008) which as file version of 10.5 and thus a CR 10.5 runtime.
Finally, to what I think you are really after. Correct me if I am wrong:
1) You have a customer that has a 3rd party app built using CR 8.5
2) Neither you, not your customer have CR 8.5
3) You want to build additional reports for the customer
If my interpretation above is correct, then you are probably out of luck. As already mentioned, CR 8.5 is not available for purchase. Versions of CR later than CR 8.5 create rpt file formats that CR 8.5 does not udnerstand.
Your options:
1) Create a new app in .NET2008 using Crystal Reports Basic for Visual Studio .NET 2008. You have to use the CR assemblies for .NET and you can use the CR 8.5 reports and any new reports you might want to create.
2) Call sales (866-681-3435) and see if there is any way you can still purchase CR 8.5. Umm, don't hold your breath, but you never know...
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

Problem while exporting to PDF with japanese character in Crystal Report X1

Hi,
I am using Crystal report X1 with classic ASP on a Windows 2003 Enterprise Server, SP 2. In my application, I have to export the report into PDF, CSV, DOC formats. I am have Japanese strings in the report. While exporting to PDF, empty boxes has displayed in the place of Japanese string and in CSV file, question mark has been displayed instead of Japanese string. But the Doc file is exported correctly. I have not installed any language support software either in server or in client machine. I have used MS Gothic and Arial Unicode MS fonts for the text-objects which has Japanese strings.
Please give me a solution so that I will get PDF file with Japanese strings instead of empty box or question mark.
Do I need to install any language support pack software?
Thanks in advance.
Regards,
Manju

Hi Don,
Thank You for your reply. I have resolved the issue of exporting to pdf from crystal report X1 having Japanese data after installing the language pack.
But when I am exporting to CSV or TXT, i am getting ??? instead of Japanese characters. I have tried "export" through crystal report designer and got ??? instead of Japanese.
The Crystal report version I am using is Crystal report X1 11.0.0.1282
Crystal Report Desinger is installed in Windows Xp machine
Font set for Text object is Arial Unicode MS, MS PMincho, MS PGothic
Does the Crystal report X1 11.0.0.1282 has the UTF-8 support for CVS / txt
Please provide me a solution
Thanks in advance,
Regards,
Manju

How to use Crystal Report in JDeveloper

Hi all,
I'm a JDeveloper fresher. To day, i want to use Crystal Report 2008 in JDeveloper.
Please support to me: how to setup, config Crystal Report to use with JDeveloper.
share to me your demo if you have.
Thanks!

No, I don't have example (I usually work with Crystal Reports inside MS Visual Studio and C#)
But some very basic example would be:
1. Create rpt file in Crystal Report Designer
2. Download CR Java Runtime files from here: SAP Crystal Reports, version for Eclipse - Down... | SCN
3. Add necessary jar files from previous step to your jdev project
4. Create new java servlet and map to some url (for example: /reports)
5. Add button/link to invoke this servlet, for example <a href="reports" target="_blank">click here</a>
6. Inside your servlet add code similar to this:
public void doGet(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException {
 ReportClientDocument reportClientDoc = new ReportClientDocument();
 try {
 reportClientDoc.open("Path to your report file", 0);
// for example, to output pdf file
response.setContentType("application/pdf");
 reportClientDoc.getPrintOutputController().export(ReportExportFormat.PDF, response.getOutputStream());
 } catch (Exception e) {
 e.printStackTrace();
If you want to use Crystal Reports JSF Viewer then you need to copy "crystalreportviewers" folder from downloaded CR Java Runtime to public_html location inside your app
and adjust code in servlet:
public void doGet(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException {
 ReportClientDocument reportClientDoc = new ReportClientDocument();
 try {
 reportClientDoc.open("Path to your report file", 0);
 Object reportSource = reportClientDoc.getReportSource();
 CrystalReportViewer viewer = new CrystalReportViewer();
 viewer.setOwnPage(true);
 viewer.setReportSource(reportSource);
 viewer.setPrintMode(CrPrintMode.PDF);
 viewer.processHttpRequest(request, response, getServletConfig().getServletContext(), response.getWriter());
 } catch (Exception e) {
 e.printStackTrace();
Of course, you can embed this viewer in existing page(instead of opening in new page/tab)
Dario

Problem on using Crystal Report Viewer on windows application ("specified type is not valid ")

Hi
I am having problem on using Crystal Report Viewer on one of my windows application.
I am not sure how to put the Crystal Report Viewer 11 Control onto the tool box.
I could found a Crystal Report Viewer control on my computer, but it is version 8.5.
I have also found another one which is Called Crytal ActiveX Report Viewer, i don't think it is the one I can use. As when I try to load a dummy report on to the Crytal ActiveX Report Viewer, It return an error. "specified type is not valid"
Please see the Code sample below.
private sub loadReport()
 Dim r as New ReportDocument
 'v is the name of the Crystal ActiveX Report Viewer Control
 r.Load("C:\Report1.rtp")
 v.ReportSource(r) <---It throw error on this line.
End Sub
Could you give me some advice about what have I done wrong, How to check if I have set up the Crystal Report Component correctly in my Visual Studio 2005 Standard edition.
Thanks in advances.
Many thanks
Chi

VS 2005 Standard and Express editions do not come with Crystal Reports; only the Professional and higher editions will have CR bundled. However, I believe you can purchase CR XI R2 Developer and it will give you the components you need to create a VS .NET 2005 application using the Standard edition.
-MJ

Deploy Visual Basic 6.0 RDC application using Crystal Reports 9 on Windows Vista

Post Author: albe
CA Forum: General
When attempting to deploy a Visual Basic 6.0 Report Designer Component (RDC) application using Crystal Reports 9 on Windows Vista systems, the application fails after the first print or preview (that show normally) and an error occurred: -2147417848 Method '' of object '' failed.
The app use the RDC and Active Data; I verify that the problem is encountered when the app calls the 'SetDataSource' method.
I tried everything that came in my mind: reinstalling it a few times, with administrator priviledges, disabling uac, manually registering dlls, ...
I hope that this will be fixed, since Crystal Report 9 is the last CR version compatible with windows 98.
thanks in advance,
Alberto

Hello,
This forum is for community use and is not considered a support site. For assistance you need to purchase a case from our support site. But 9 is no longer a supported version so this is your only place to get assistance.
Try downloading the only patches available from:
ftp://ftp1.businessobjects.com/outgoing/CHF/cr90actxwin_en.zip
ftp://ftp1.businessobjects.com/outgoing/CHF/cr90dbexwin_en.zip
ftp://ftp1.businessobjects.com/outgoing/CHF/cr90devwin_en.zip
ftp://ftp1.businessobjects.com/outgoing/CHF/cr90mainwin_en.zip
Thank you
Don

Problems with concurrency tests using Crystal Reports for VS 2005

Post Author: condeagustin
CA Forum: General Feedback
Hi
My name is Agustin and Im using Crystal Reports for VS 2005
and NET 2.0 to generate pdf files. This is the scenario:
I created a COM+ object in c# and everytime the
COM+ creates an instance of this object, the following flow is executed:
it reads an xml file from a database, then it feeds the report with this
xml file, afterwards it generates a pdf file and finally this pdf file is
inserted into the database. Both fields (xml and pdf fields) are varbinary in the
same table in sql server 2005. All the flow from reading the xml to inserting
the pdf into the database is executed in memory, it never goes to the hard
disk. In other words both the xml and the pdf file are stored in memory (the
RAM). That is the only function of that COM+ object and I already have it in a
production server and it works GREAT!!
The PROBLEM is the concurrency tests. I made the following tests
in the same production server:
1. First I went to the registry and I set the PrintJobLimit to
100 in HKEY_LOCAL_MACHINESOFTWARECrystal Decisions10.2Report Application
ServerServer
2. I shut down the object in the COM+ and I executed 100
threads all at the same time. Each thread created one instance of the object in
the COM+ and the 100 pdfs were generated SUCCESFULLY in 5 minutes!!
3. Then I executed again 100 threads (WITHOUT shutting down the
object in the com+). 10 pdfs were generated succesfully but the rest were
never generated and there was no exception because my object was NEVER
INSTANTIADED in the COM+, I mean, the 90 instances were never created in the
COM+, so my object was never executed, THAT IS MY PROBLEM!! Do I have to
modify something in the registry files of crystal reports to fix this? What can
I do? I have revised the code in that object a LOT OF TIMES and believe me,
everything is being closed and disposed at the end (the memory streams, the
ReportClass objects, the connection to the database, even the dataset used to
store the data of the xml file!
So to sum up the problem is not with the execution of my object
(cause once is created the object works great and the pdf is generated
perfectly!), the problem is with the com+ TRYING to create another instance
of my object given that test scenario. Help me please, What do you
suggest?
The production server has this specifications:
Operative System: Windows Server 2003 Enterprise Edition with Service Pack 2
Processor: Dual Core AMD Opteron 2212 2.00GHz
RAM: 820MB
Hard drive: It is partitioned in 2 drives --> C
drive has 20GB and D has 60GB
Note: Each generated pdf has only one page and if you bring it
to disk its maximum size is 56KB
I hope your answer and thank you
Agustín Conde Martí

Post Author: John Werner Enoksen
CA Forum: General Feedback
Hi, im about to write a simular solution where I will use VS2008/Com+ to be in compliance to an existing solition written in VB6.0, so I was googling to look for bumps. Did you figure this one out?
Best regards,
John Werner

I couldn't use Crystal Report Viewer Control in my ASPX page.

Please I'm having a problem with crystal report viewer control which I couldn't resolve. I'm using VS 2008 and Framework 3.5.
I building an ASP web application and when I add a CrystalReportViewer to my ASPX page I'm getting the following
error.
"Error 20 Type 'CrystalDecisions.Web.CrystalReportViewer' is not defined."
I think maybe because I'm not having the right reference file. I'm using Crystal Reports 2008 and also I installed the following
Service Packs:
cr121_redist_install
CR2008-SP1
CR2008SP1-Fixes 1 and 2
cr121_clickonce
I check all the reference files in my project and they are as follow:
CrystalDecisions.CrystalReports.Engine (12.0.2000.0)
C:\Program Files\Business Objects\Common\4.0\managed\dotnet2\CrystalDecisions.CrystalReports.Engine.dll
CrystalDecisions.Enterprise.Framework (12.0.1100.0)
C:\Program Files\Business Objects\Common\4.0\managed\CrystalDecisions.Enterprise.Framework.dll
C:\Program Files\Business Objects\Common\4.0\managed\CrystalDecisions.Enterprise.InfoStore.dll (12.0.1100.0)
C:\Program Files\Business Objects\Common\4.0\managed\dotnet2\CrystalDecisions.ReportSource.dll (12.0.2000.0)
C:\Program Files\Business Objects\Common\4.0\managed\dotnet2\CrystalDecisions.Shared.dll (12.0.2000.0)
Please Why I'm getting this problem? How I can resolve it?
Thanks.

If you have a viewer on one of your forms, delete it off the form and re-add it, ensuring that the crystalreports.web assembly referenced in your project is version 12.
Ludek

How to use crystal report in php

hello
i need help for how to use crystal report for view the database report spacilly crosstab report i need it very much to complete my project ill be very thank full for help
from farooq

Hello sir
i am sudeep and i need to deploy crstal reports in php
i want to integrate it in sugar crm (open source project(
can u plz tell me how to do it
i have written this code
<?php
//echo phpinfo();exit;
$ObjectFactory= New COM("CrystalReports11.ObjectFactory.1");
$crapp = $ObjectFactory->CreateObject("CrystalDesignRunTime.Application");
//$crapp = new COM("CrystalRuntime.Application.10");
$reportToRun="C:\Report4.rpt";
$creport = $crapp->OpenReport($reportToRun, 1);
//reportToRun=full path to *.rpt file
$creport->Database->Tables->
Item(1)->ConnectionProperties['User ID'] = $user;
$creport->Database->Tables->
Item(1)->ConnectionProperties['Password'] = $pass;
//fomatType = integer 22=xls, 31=pdf etc
$creport->ExportOptions->FormatType = $formatType;
//type 1 is to output to a file I think 2 is email
$creport->ExportOptions->DestinationType = 1;
//location = full path to report output file
$creport->ExportOptions->DiskFileName = $location;
$creport->DiscardSavedData();
$creport->Export(False);
?>
thanks in advance

How to use Crystal Reports XI release 2 Preview with Lotus Notes Scripts ?

 Hi all, How to use Crystal Reports XI release 2 Preview with Lotus Notes 7 Scripts ? Thank's 

Hi,
we are using Lotus Notes and Crystal Reports for preview and printing reports from our Lotus Notes Applications. We use the RDC object model. For previewing the reports we export them in an pdf-file and then start the PDF Reader to show the Preview. This works fine.
But with Crystal Reports > 11 the RDC Object Model is no longer supportet, so we look for another way to preview and print our reports.
I try to preview a report build with crystal report XI release 2 in my thick client (Lotus Notes) using java reporting component JRC, this report uses an native xml file as datasource. If the datasource is saved with the report everything works fine, but otherwise I have the following error:
JRCAgent1 detected an exception: javax.xml.namespace.QName: method getPrefix()Ljava/lang/String; not found
I also tried the .jars from Crystal4Eclipse. Doesn't work. When I use Eclipse to view the report everything works fine. The class QName exitsts in the jaxrpc.jar and in the xbean.jar, but only in the xbean.jar a Methode getPrefix exists.
This is what we tried:
Works fine with RDC. Doesn't work with JRC until now.
Did this help you ?
Perhaps you con help me with the JRC, because I'm a java newbee so any ideas could be helpful.
Oliver
<a href="http://www.cominform.de">www.cominform.de</a>

How to use Crystal Reports 11 with Visual C++ 2005 ?

Post Author: compvis
CA Forum: General
Hello everyone !
Plz tell me how to use Crystal Reports XI with Visual C++ 2005 ?
Thank you so much !

Moved to .NET SDK forum.
Need more info, version of the assemblies you are using and the assembly file system version number ( not the same as what you see in the properties of the project.
As well, what happens if you use OLE DB as a test?
Thank you
Don

Creating Employee Badges using Crystal Report.

Hi,
I have a requirement where i have to create Badges for Employees using Crystal Reports. The report is created but the issue here is when i generate the PDF output, apart from the portion of the rectangular Badge, there is lot of white spaces on the report and when i give it for printing, the entire PDF with white space is also coming up. I tried with resizing the crystal report but it did not worked. I want only the rectangular portion of the badge to come on the PrintPreview which can then be given for Print. Is it something to do with the print setting? I am using a special kind of printer(Evolis-Pebble) which is used to print badge cards.
Any help will be greatly appreciated.
Thanks,
Ashish.

Thanks Jayaprakash, we have asked for the installation of printer driver on the server machine where we design the report. Hopefully, we should get options to customize the report template to correct size as of the Badge size. Currently only default options are coming which doesnot allow us to use custom option to have the report to exact size of the Badge in the page setup.
Thanks,
Ashish.

Database Location using Crystal Report XI

Crystal Report XI Developers Edition; VB 6 Enterprise Edition
Prior to using Crystal Reports, I will create (if not already there) a database in my Visual Basic project file.
Via Crystal Report XI, when I designed reports, I used Database Location as my project file where I stored a copy of the .mdb file.
Prior to creating an "installaltion setup" package, I will create a Directory in Program Files. Let's use and example--I'll call the Directory in Program Files "Sports" so what I do is to copy the ".mdb" file to this directory and change the database location in the rpt files to "C:\Program Files\Sports".
I have a question, in most install packages, the installer has the option to change the location of the setup files. Let's say installing my application, the user changes the directory. Therefore, the setup files (including the database) are not in "C:\Program Files\Sports" they are in "C:\Program Files\SomeOtherDirectory".
QUESTION: How does Crystal Report know about this change? Remember in the design I setup the database location as ""C:\Program Files\Sports". Is there a way to tell CR where the database file is located (i.e. application path)?
Thanks,
Sam

The Crystal Reports dlls must be in the correct Bin directory (depends on the version of CR used). You can not change this. If you are using a database such as Access mdb, you can set the report to look in it's own directory for the mdb database. If that is what will work for you, ensure that the report and the database file are in the same folder. let me know if you need more info on this.
Ludek

Attaining PDF version 1.3 using Crystal Reports 10.5

Similar Messages

Maybe you are looking for