Attendant console error - connection failure .... using server port 1859

Hi we are having issues where the user is unable to login to the attenadnt console
the error is as follows -
A connection failure has occurred attempting to connect to server: using server ort: 1859. Please ensure the server is active, and the logging information is correct.
After reboot everything is OK
the netstat shows the app listening on 1859 is CTSS.exe? Which service does it corelate to in Windows? I can check if that service is running next time. I did not find a CTSS service ot something that sounds similar.
Also, in order to open a TAC Case where do I find the serial number for the Attendant console?

Welcome to discussions leffjay. Good one. Cheers.

Similar Messages

Sapwebdispatcher: ERROR: Connection to message server failed

Hi Team,
We have been facing an issue on the webdispatcher. Web-disaptcher is notable to communicate with the Message Server[PRD-XI].
=====================
Environment: Set-up =
=====================
1. The Webdispatcher is in DMZ. We have opened the port 8100 at the firewall.
==========================================================================
ERROR MESSAGE
==========================================================================
[Thr 2058] Fri Jan 11 18:53:27 2008
[Thr 2058] *** ERROR => NiBufIConnect: non-buffered connect pending after
5000ms (hdl 4;10.1.10.56:8100) [nibuf.cpp 4611]
[Thr 2058] *** ERROR => Connection request from (-1/65535/0) to host:
10.1.10.56, service: 8100 failed (NIECONN_REFUSED)
[icxxconn_mt.c 2738]
[Thr 2058] *** ERROR => IcmConnClientRqCreate() failed (rc=-8)
[icrxx_mt.c 5100]
[Thr 2058] *** ERROR => Could not connect to SAP Message Server at
10.1.10.56. URL=/msgserver/text/logon?version=1.2 [icrxx_mt.c 2459]
[Thr 2058] *** ERROR => rc=-1, HTTP response code: 0 [icrxx_mt.c 2460][Thr 2058] *** ERROR => see also OSS note 552286 [icrxx_mt.c 2461]
==========================================================================
SAPWEBDISPATCHER VERSION DETAILS:
==========================================================================
wd011:wpiadm 73> sapwebdisp -v
SAP Web Dispatcher Version 7.00.10, multithreaded, ASCII, 64 BIT
kernel information
system name =
kernel release = 700
database library =
compiled on = AIX 2 5 005DD9CD4C00
compile time = May 19 2007 01:59:47
update level = 0
patch number = 110
source id = 0.111
supported environment
operating system
AIX 1 5
AIX 2 5
AIX 3 5
=============================================================================
TEST OUTPUT
==========================================================================
wd011:wpiadm 71> sapwebdisp -bootstrap
SAP Web Dispatcher Bootstrap
============================
This bootstrap will perform the following steps:
1. create profile file "sapwebdisp.pfl"for SAP Web Dispatcher (if not
already existing)
2. create user for web based administration in file "icmauth.txt"(if notalready exisiting)
3. start SAP Web Dispatcher with the created profile
After the bootstrap you can use the web based administration
Generating Profile "sapwebdisp.pfl"
Hostname of Message Server (rdisp/mshost): 10.1.10.56
HTTP Port of Message Server (ms/http_port): 8100
Checking connection to message server...
ERROR: Connection to message server failed: NIECONN_REFUSED
Do you want to continue with these settings? no
==========================================================================
BACK-END APPLICATION MESSAGE SERVER DETAILS: SID: PPI [PI/XI]
==========================================================================
icm/server_port_0 PROT=HTTP,PORT=80$$
ms/server_port_0 PROT=HTTP,PORT=81$$
trc file: "dev_ms", trc level: 1, release: "700"
[Thr 1] Thu Jan 3 15:31:05 2008
[Thr 1] WLM Tag 'PPI/MSG' successfully set for this process
[Thr 1] MsSSetTrcLog: trc logging active, max size = 20971520 bytes
systemid 324 (IBM RS/6000 with AIX)
relno 7000
patchlevel 0
patchno 110
intno 20050900
make: multithreaded, Unicode, 64 bit, optimized
pid 2519162
[Thr 1] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 2519162)
[msxxserv_mt. 1824]
[Thr 1] SigISetDefaultAction : default handling for signal 20
[Thr 1] load acl file = /usr/sap/PPI/SYS/global/ms_acl_info
[Thr 1] MsGetOwnIpAddr: my host addresses are :
[Thr 1] 1 : [10.1.10.56] pi100 (HOSTNAME)
[Thr 1] 2 : [127.0.0.1] loopback (LOCALHOST)
[Thr 1] 3 : [10.1.99.4] pi100v (NILIST)
[Thr 1] MsHttpInit: full qualified hostname = pi100
[Thr 1] HTTP logging is switch off
[Thr 1] set HTTP state to LISTEN
[Thr 1] ms/icf_info_server : deleted
[Thr 1] *** I listen to port sapmsPPI (3600) ***
[Thr 1] *** I listen to internal port 3900 (3900) ***
[Thr 1] *** HTTP port 8100 state LISTEN ***
[Thr 1] CUSTOMER KEY: >R1306811094<
[Thr 1] Thu Jan 3 15:31:28 2008
[Thr 1] MsHttpReadUrl2: H-1 url = /sap/public/icf_info/urlprefix (403
Forbidden)
[Thr 1] MsHttpReadUrl2: H-1 url = /sap/public/icf_info/logon_groups (403
Forbidden)
======================+++++++++++++++++++++++++++==============================
Please find the attached file for a better understanding of the trace file.
A quick action on this would be much appreciated.
Please let me know for any information required.
Thank you.
Regards,
~sagar

Vipin,
I don't have access to our firewall myself to confirm what ports and services we opened (I worked with our Network Operations team to get this done), but if I recall correctly, it was pretty limited, just http and https over tcp ports 80, 443, 8100, and 8101. Probably could even restrict that to just https over 443 and 8101. However, from your configuration, you don't yet have your web dispatcher configured to talk to your message server over https, only http. I would recommend that you get the web dispatched completely configured and working in as close to your final desired configuration as possible while keeping it inside your firewall, not your dmz. Then move it to the dmz and see what breaks, and that way you know it's just the firewall that needs configuration at that point.
To configure the SSL termination, the following are the parameters required and the way that I configured them in our scenario (which terminates incoming SSL requests and re-encrypts them when sending them on to the backend, and also uses SSL for message server communication):
rdisp/mshost = mshost.domain.org
ms/https_port = 8101
wdisp/server_info_protocol = https
wdisp/group_info_protocol = https
wdisp/url_map_protocol = https
icm/server_port_1 = PROT=HTTPS,PORT=443,TIMEOUT=30,PROCTIMEOUT=600
icm/server_port_2 = PROT=HTTPS,PORT=8101,TIMEOUT=30,PROCTIMEOUT=600
icm/host_name_full = wdhost.domain.org (note, use the externally visible name as registered on your SSL certificate for web dispatcher here; does not need to match the actual machine hostname, but must be resolvable in external DNS)
icm/HTTP/admin_0 = PREFIX=/sap/admin,DOCROOT=\usr\sap\RW1\W00\data\icmanroot/admin,AUTHFILE=\usr\sap\RW1\SYS\global\security\data\icmauth.txt,PORT=8101
ssl/ssl_lib = $(DIR_EXECUTABLE)\sapcrypto.dll
ssl/server_pse = $(DIR_INSTANCE)\sec\SAPSSLS.pse
ssl/client_pse = $(DIR_INSTANCE)\sec\SAPSSLC.pse
wdisp/ssl_encrypt = 2
wdisp/ssl_auth = 1
is/HTTP/show_detailed_errors = FALSE
wdisp/permission_table = $(DIR_INSTANCE)\sec\ptab
On the backend host I have the following parameters:
sec/libsapsecu = \usr\sap\RP1\DVEBMGS00\exe\sapcrypto.dll
ssl/ssfapi_lib = \usr\sap\RP1\DVEBMGS00\exe\sapcrypto.dll
ssl/ssl_lib = \usr\sap\RP1\DVEBMGS00\exe\sapcrypto.dll
ssf/name = SAPSECULIB
icm/server_port_2 = PROT=HTTPS,PORT=443,PROCTIMEOUT=-1
ms/server_port_1 = PROT=HTTPS,PORT=8101
Naturally, a server certificate is configured on the backend that the web dispatcher trusts (it can be an internally generated certificate; the outside public just needs to trust the web dispatcher's certificate, so that one should come from a recognized CA). Port 8101 is NOT open from the outside, just from the dmz and only to/from the web dispatcher host (this does allow me to use the webadmin interface from the inside). The https service also has to be activated on the backend in SMICM.
There's good advice about security setup for the web dispatcher in Note 870127, and troubleshooting advice in the Note mentioned in your tracefile output, 552286. Fairly complete documentation is in the online help at http://help.sap.com/saphelp_nw70/helpdata/en/de/89023c59698908e10000000a11402f/frameset.htm. Note 538405 is also good, more for performance configuration than security.
I hope you find this helpful.
--Matt

Error connecting to ftp server

Dear All,
I'm doing file to file scenario through XI. The receiver communication channel is a normal file adapter and it is working perfectly fine . My sender communication channel is a FTP adapter. I'm trying to send a file from FTP to a folder on my integration engine. When i went into adapter monitoring, i got the error in the sender file adaper for ftp. The error is - " Error connecting to ftp server ".
normally, i'm able to do the ftp from integration server to my ftp server, but through XI , it is giving me the above mentioned error. I think some of my properties are not specified correctly. Kindly advise . The properties that i have specified in the ftp adapter are -
adapter type - file
transport protocol - ftp
message protocol - file
adapter engine - integration server
server - ip address of the ftp host
port - 21
username - username of the ftp server
password - password of the ftp user
connect mode - per file transfer
transfer mode - binary
folder - name of the folder created on the ftp root directory ( without the path ) Do i need to give the full path here ?
file name - file in the above specified folder
Kindly let me know.
Regards.
Naveen

HI Naveen,
This link explains all the parameters that need to be entered for a file adpater. Just check it out and compare it with your values and your FTP settings.
http://help.sap.com/saphelp_nw04/helpdata/en/e3/94007075cae04f930cc4c034e411e1/content.htm
//folder - name of the folder created on the ftp root directory ( without the path ) Do i need to give the full path here ?
Yes, i think you should specify the full path here.
Regards,
bhavesh

Error connecting to Essbase Server when running business rules

We recently migrated from v9.3 to v11.1.1.3. I have two users with Administrative access who need to run business rules on a native Essbase application, but cannot. They get the message 'Error connecting to Essbase Server'. They get this message when trying to set this execution database. They can't even expand the server to see the list of applications. I have tried deprovisioning them in Shared Services, refreshing security, then adding it all back in and refreshing again, but it doesn't work. My own id has identical access to that which I'm granting them, and I have no problems. I even created a native user with the same access and it works as well. No matter what I do, I cannot get these two users to be able to run their business rules in EAS.
We also have a Planning application, and the Planning Administrative user has the same issue. However, this user is able to get around it by running rules using the Planning connection rather than the Essbase connection. She has the same issue of not seeing anything under the Essbase Servers when trying to set the execution database though.
In version 9, we were not using Shared Services for Essbase security. Unfortunately our consultant chose to set it up using Shared Services security when migrating, and according to the documentation, one cannot go back to using Native Essbase security.
I also tried running the Externalize Users wizard and the three users with issues failed to externalize. My own id did, and the native user I created succeeded.
Has anyone experienced an issue like this or have any ideas on how to resolve?
Thanks,
Sabrina

Follow up - Oracle has finally resolved this. It's so simple, yet no one thought to check until now. The three users with problems all have mixed case user id's in ldap. They have always logged into EAS with all lower case ids. In version 9, on native security, this was never a problem. But in version 11 using Shared Services (not sure which factor changed it), it doesn't work. The simple solution is to log in with their exact mixed case user ids. It only took Oracle three months and the creation of a bug issue to figure this out for us.
Sabrina

"Connection failed ... There was an error connecting to the server"

Hi,
I have a late-2009 imac, running Snow Leopard and all the latest updates.
However, since ugrading to ilife '09, I now see the following error
"Connection failed
There was an error connecting to the server
"BeechMac". Check the servername or IP address and then try again"
However, "Beechmac" was the name of the older G4 Mac from which I upgraded (using Time Machine) to the imac last year - and it no longer exists on the network.
As a test, I copied over to this Mac Mini (also latest OS and updates) all the iphoto directory prior to update and then updated to ilife '11 - same problem is seen.
I assume some files have some form of symbolic links to a networked partition ?
The only difference to my network/system has been updating to ilife '11 - and all I use is iphoto.
However, the error pops up every hour or so - and the mouse disappears and its tricky to gain mouse focus again to remove the message.
I've scoured the Internet - but no help.
- Paul

I think I've identified the problem (or at least a solution).
There were broken Alias links for some of the photos in my iphoto directory.
I navigated Finder to the root of my iphoto collection and searched for "Kind: Alias"
I then checked (using Right-Click:"Get info") that the Alias was working (if not a broken Jpeg icon was shown), and if not fixed up.
It appears that in my system moves from taking photos from PC onto my original G5 Mac and then into iphoto (which had two partitions) some of the files had been aliased rather than copied. (Not sure exactly how this happened).
Anyway, I was able to repair the broken file by going into the Terminal and copying the required JPEG onto the Alias.
I wish there was an easier way to find broken Aliases - it was fairly tedious.
- Paul

HBR running error (Urgent, please help) Error connecting to Essbase Server

Hello All Expert
When running business rule either from Planning Web (Planning 9.3.1.1.8) or EAS, sometime there will be a error "Error connecting to Essbase Server" appear.
After the error appear, all the can't be run.
But after a while, problem may disappear and all the rules can be run.
Anyone having this problem before, please help
Eric

I am actively using the EAS, but the error is suddenly come that I think I am not logout by server

HT4519 I have a yahoo email account and i keep getting an "error connection to the server failed"

The email account i have always used on my ipad mini is through yahoo. Now i keep getting an error "connection to the server failed" when trying to access my email.

its a common message but could be due to several possible causes
try this
close the mail app by double tapping the home button, swipe the screen until you see the large icon of the mail app. Swipe the app up and off the screen to close. Tap the home button to return to home screen. Open mail app again.
if that didn't work, then...
Reboot device by pressing both the home button and sleep/wake (power) buttons at the same time for 10-15 seconds until the apple logo appears on the screen, then let go.
If that doesn't work then reset the device by going to settings/general/reset/reset all settings (or for network connection issues 'reset network settings').
(no media or data will be deleted from the device, this will only take a minute).
Unplug your wifi router for 5-10 minutes and at the same time reset settings on the ipad
settings/general/reset/reset all settings
(no data will be lost)

Error connection to sql server files (*.mdf)

please tell me how i resolve this error
"error connection to sql server files (*.mdf) require SQL Server Express 2005 to function properly. Please verify the installation of the component or download from the URL: http://go.microsoft.com/fwlink/?LinkId=49251"
whenever i tried to make database i got this error.
please help me

please tell me how i resolve this error
"error connection to sql server files (*.mdf) require SQL Server Express 2005 to function properly. Please verify the installation of the component or download from the URL: http://go.microsoft.com/fwlink/?LinkId=49251"
whenever i tried to make database i got this error.
please help me
Hello,
After googling I found below
http://forums.asp.net/t/1120411.aspx?connection+to+SQL+Server+files+mdf+require+SQL+server+express+2005+to+function+properly+
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

HBR Error connecting to Essbase server

Hi,
Getting an error " HBR Error connecting to Essbase server" while selecting the outline in create new business rule.Tried the below workaround,but still getting the same error.
* Copy the HBRServer.properties from AAS (<HyperionHome\Hyperion\AdminServices) to the Planning Server
(<HyperionHome\Hyperion\HyperionPlanning\AppServer\InstalledApps\...)
* Restart the services.
* Login to Hyperion Planning application. Connect to each application at issue to establish RMI connection.
* Log into AAS, Refresh security from Shared Services
Any solution/ workaround could be of very helpful.

Hi,
Are you trying to create a business rule for planning or essbase, the error message you have posted is for trying to connect to essbase and you usually get that message if essbase is not started or unreachable.
Cheers
John
http://john-goodwin.blogspot.com

Error connecting to planning server from EAS

We implemented Hyperion Planning about 1 month ago. We are having this intermittent issue with connecting to Planning servers. When the users attempt to add a Business Rule, they select an outline, and browse to the planning servers. When they click one of the two servers they get the message "Error connecting to Planning server <<Server A>>". The message only happens on Server A.
I check the planning service, it is running. I login directly to the planning application (http://<<Server A>>:8300/HyperionPlanning/) , it works fine. However I still get the error. The problem comes and goes, but once is happens the only solution seems to be restart all of the services on the Planning server.
Is anyone experiencing this issue?
If so is there a resolution? Is this a common thing with Hyperion Planning?
I opened a TAR, but because the issue is only happening occasionally (1 day in 5) I thought I would try the forums. Any help or suggestions would be appreciated.

Hi,
What version of planning are you running, there was patch 9.3.1.1.1 that addressed
6636367 (8-665086601) When the Business Rules connection to the relational database is lost, Business Rules does not reconnect to it. To solve this problem, an optional property, HBR_CONNECTION_VALIDATE_TIME, was added to HBRServer.properties. This property specifies a time interval for checking the connection between Business Rules and the relational database. If the connection is not valid, a new connection is established. The time interval is specified in milliseconds and defaults to 300,000 (five minutes).
This maybe the same sort of issue you are experiencing.
Cheers
John
http://john-goodwin.blogspot.com/

Recieving Error connecting to Planning server when validating BusinessRule.

Hi,
I am recieving an error when validating business rules.
Internal error connecting with given connection information. Get details for more information.
When I click on Get Detail I see the below information.
Details:Error connecting to Planning server xxxxxx.
Details:Exception occurred. Please check your log file for details.
I do have one more issue I cannot access Applications through Web. Recieving the following error Unsuccessful Logon Check Log for details.
Hyperion Planning Version is 9.2.
Please help.
Thanks.
Edited by: user8887080 on Aug 18, 2010 1:39 PM

I recommend logging into My Oracle Support and having a read of doc id - 763345.1
It goes through different options for resolving business rules issues.
Though you will need to be able to log into your planning applications first, make sure all your connection information is correc e.g. the connection details to the relational databases.
Cheers
John
http://john-goodwin.blogspot.com/

How do I get rid of the error message "There was an error connecting to the server “Office AirPort Extreme” ?

How do I get rid of the error message "There was an error connecting to the server “Office AirPort Extreme” ? This message shows up 3 times when I boot my iMac.

I do have a USB hard drive hooked up to the Airport. I've never created an AppleScript for it. Should I disconnect the USB drive and see if I still get the error message?
Thanks for your reply!

Trying to sync my macs but getting this... error connecting to the server

trying to sync my macs but get this .....error connecting to the server,check server name or ip address ?????

Same problem . . . any resolutions out there?

Hi, I have keep seeing a small 'Connection failed' warning box popping up: [[Connection failed There was an error connecting to the server "Warning; Self Aware"]]. Question for you gods - what does it mean. is it important? my computer connects to my

hi, I have keep seeing a small 'Connection failed' warning box popping up: [[Connection failed There was an error connecting to the server "Warning; Self Aware"]]. Question for you gods - what does it mean. is it important? my computer connects to my server works. Could it be related to "Network Preference & Monitor icons missing from my system preferences page? and my guest sign=in account is now the main account?? thanks you. jb

hi, I have keep seeing a small 'Connection failed' warning box popping up: [[Connection failed There was an error connecting to the server "Warning; Self Aware"]]. Question for you gods - what does it mean. is it important? my computer connects to my server works. Could it be related to "Network Preference & Monitor icons missing from my system preferences page? and my guest sign=in account is now the main account?? thanks you. jb

Console cannot connect to Admin Server in a local network

Hi,
This issue may has been asked before, but I didn't find corresponding answer. So I ask again:
The Directory server 5.2 P4 is running on Windows XP and a console running on the same server (192.168.1.80) works fine. However second console which is running on 192.168.1.50 can not connect to admin server. Error message is:
Cannot connect to the Admin Server "http://homeserver.keiban.com:5201/" The URL is not correct or the server is not running.
I noticed that if I use http://192.168.1.80:5201 to connect admin server instead of http://homeserver.keiban.com, it took 10 seconds to show Initialization Failure:
Connect connect to the Directory Server "ldap://homeserver.keiban.com:5200" LDAP error: failed to connect to server ldap://homeserver.keiban.com;5200 Would you like to attemt to restart the Directory Server?
In Control Panel -> Windwos Firewall -> Exceptions, I have added port number 5201 for Sun ONe Admin Server 5.2 on TCP.
In etc/host file, an entry is already added:
192.168.1.80 homeserver.keiban.com homeserver
Both computers are in a local network and via cable DSL to connect to Internet. Is there some thing I am missing?
Your help will be appreciated,

1. Make sure your FQDN is set up correct on both
client and Server.Victor, you are right! I setup FQDN on server properly, but forgot to have FQDN setup to map FQDN to IP address on client. So the Console goes to Internet to find the directory server in which it causes failure.
Thanks your hint,
a. ping xxx.xxx.xxx.xxx from client to Server
Check the Admin Server for Client Access Control
configuration.
Victor

Attendant console error - connection failure .... using server port 1859

Similar Messages

Maybe you are looking for