Attribute calculations dimension is absent while refreshing database in planning app

Dear All,
I have loaded two attribute dimensions and a custom dimension called "Program" in my planning application. These attributes has to be associated with the "Program" dimension members". After loading these dimensions I tried to refresh the planning application. But it throws me the following error.
"Attribute calculations dimension is absent"
Kindly guide me to overcome this issue.
SC

I take that you are using EPMA (the fact that you were able to create an attribute dimension without associating it with a base dimension).
You'll have to create an association, to attach the attribute to a sparse dimension.
Creating Dimension Associations
You can create a property for each attribute (I usually call it as <name of the attribute>_Prop)
Regards
Celvin

Similar Messages

  • Planning webservice terminating while refresh database

    Planning websevice terminating while refresh database from planning to essbase.
    It's new setup.Planning version 11.1.1.3.
    We have loaded metadata into our planning application.
    One of our product dimention have 2,75,000 records.
    While refreshing database,Planning server utilization going 100% and services are terminating.
    We have 8 GB RAm on planning server.
    Our Essbase is on Solaris box.
    Thanks,
    Venkat

    927875 wrote:
    Planning websevice terminating while refresh database from planning to essbase.
    It's new setup.Planning version 11.1.1.3.
    We have loaded metadata into our planning application.
    One of our product dimention have 2,75,000 records.How many members does your product dimension have
    275,000 or 2,750,000 or ?
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Refreshing Database From Planning

    Hello,
    I have three datases in my Planning application.
    I am going to perform a refresh from Planning to Essbase.
    Is it possible to control which database is refreshed?
    - If so, please tell me how. or point me to a resource I can use as a guide.
    Or do I have to refresh all three every time I perform a refresh?
    Thanks,
    Dave

    user1651519 wrote:
    I am a little hung up on this - so please forgive me - I think I need a bit more clarification.
    I have Essbase and Planning installed on separate servers.
    Application: BUDGET
    Database: Sales
    Finance
    If I use the following command:
    HspCubeRefresh.Cmd /A:<application_name> /U:<user_name> [P:<password>]
    C [D] [F[S|V]][RMIPORT:<rmi_port>] [L] [DEBUG])
    [R] - Specifies a refresh
    [D] - Specifies the database for the refresh
    So if I specify my Sales database - to me this looks like I will only be pushing my Sales metadata from Planning to Essbase.
    Am I incorrect?
    If I am correct - then the Finance database metadata is not refreshed from Planning - Right?
    Why would the command allow me to specify a database if it is going to force a refresh of all databases in that application?
    Dave,
    You need not specify any database name at /D. It is just to let planning know that you want to refresh database.
    You have two options when you do a refresh.
    1. database
    2. security filters
    /D specifies that you are gonna refresh database and by default it will update changes to all databases( nothing needs to be mentioned in specific). /F specify that you are gonna refresh filters. You can use both parameters as well.
    I suggest you to look at the planningweb goto administration--->manage database. This will give you a clear picture of what a Refresh does.
    Hope this helps!
    Hope this helps!

  • Error 1054013 when attempting to refresh database from planning

    I get the error 1054013: Syntax error loading filters - operation canceled when attempting to refresh the database from planning. I refreshed the security filters but it did not fix the problem. Has anyone else experienced this or does anyone have an idea on the root cause? Thx in advance.

    HiThis is actually an Essbase issue. If you stop and start the application it shoudl stop happeningNot sure what causes it, but seems to be long filters (generally created from Planning). It would be worth speaking with Hyperion or checking on the knowledge base for any further info.I have previously cleared the security file and recreated which clears the problem. Hope this helpsAndy Kingwww.analitica.co.uk

  • 'dimension attribute was not found' error while refresing the cube in Excel

    Dear All,
    Thanks for all your support and help.
    I need an urgent support from you as I am stuck up here from nearly past 2-3 days and not getting a clue on it.
    I have re-named a dimension attribute 'XX' to 'xx' (Caps to small)in my cube and cleared all dependencies (In Attribute relationship tab as well).
    But while refreshing the data in excel client (of course after processing the full cube) I get an error
    'Query (1, 1911) the [Dimension Name].[Hierarchy Name].[Level Name].[XX] dimension attribute was not found' error.
    Here I am trying to re-fresh an existing report without any changes with the new data.
    Does not it re-fresh automatically if we clear the dependencies or there something that I am missing here (Like order of the dependencies).
    Cube processed completely after modifications and able to create new reports without any issues for same data. What else could be the reason?
    Can some one help me here?
    Thanks in Advance and Regards,

    Thnaks alot Vikram,
    In se11  ,when i was trying to activate the  /BIC/FZBKUPC , it is showing the warnings  like
    Key field KEY_ZBKUPCP has num. type INT4: Buffering not possible, Transport restricted.What it means.
    In PErformance Window it is showing like:
    A numeric type was used for a key field. A table of this sort cannot be buffered.When buffering, the table records for numeric values cannot be stored in plain text.
    Procedure
    You can enter "no buffering" as an attribute of the technical settings and then repeat the activation process. The table is not buffered.
    If you want to buffer the table, you must replace the type in the key field by a character type, i.e. that you must modify the table.
    Please adivice with your valueable suggestyions.
    Thanks Vikram.

  • Database Error while refreshing webi report

    Hi,
    I am getting following error while refreshing webi report. And also all my scheduled webi reports are getting failed because of same issue. What would be the reason for this error.
    Regards,
    PRK

    Hi Praveen,
    As you are getting error 'IES10901' it is related to database connection issue.
    Find below link it might help you.
    Database error in Web I ( BO 4.0)
    check your universe connections to DB(ODBC connections).
    Regards,
    Samatha B.

  • Hyperion Planning migration error while refreshing/creating Essbase cube

    Hi,
    I'm migrating a Hyperion Planning application (11.1.1.4) to a complete other environment (due to the split of the companies). I have read most post on otn, but unfortunately nothing that helped me to solve the issue, yet... I hope someone can help me. Thanks in advance!
    I have executed the following steps:
    1. Create a new Oracle database
    2. Create a datasource to the Oracle database and to Essbase (both tested succesfully)
    3. Create a fresh planning application (I have used a native Admin account and not the original owner)
    4. Go into the database tables for the planning app and look at table HSP_USERS, store the SID value against user 50001
    5. Go into the database planning system tables and HSPSYS_APPLICATION, clear out the version field for the application you have created - I did not do this since I could not delete this value. null is not accepted.
    6. Stop Planning
    7. Restore the planning application database over the one created in the first step (I had to drop the existing tables first)
    8. Go into the HSP_USERS table and update the SID for user id 50001
    9. Start planning
    10. Log on to planning and I did see the webforms, etc as expected.
    11. Now, when I try to refresh the database, I receive an error:
    Cube refresh/create in progress
    Status failed
    Step 4 Adding dimensions
    java.lang.NoSuchMethodError: getAttributeType
    Does anyone has an idea? Hope someone can help me since the deadline is getting closer and closer.
    Thanks!
    Kind Regards
    Martin

    Hi John,
    Thanks for your reply.
    I have exactly done what you have described. I droped the schema and recreated it with an impdp to import.
    But, in the meantime I have been investigating the dimensions and there's indeed something very wrong. Some dimensions have been mixed up. In the 'old' environment I have 10 stored dimensions and 4 attribute dimensions (as well as in EAS as in Planning, offcourse as you expect). In the 'new' environment, two stored dimensions have been mixed up with two attribute dimensions.... How is that possible?
    I have never seen that. Could this be caused by the reason that we use a different version of Oracle (11G release 2 vs 10G (10.2.0.4))? Or went something wrong with exporting the schema...? Can you tell me what I can do to investigate this?
    Thanks!
    Kind Regards,
    Martin

  • Error occured while refreshing webi report in bi system

    Dear Experts ,
    please look into my problem
    While refreshing WebI report in BIDEV system, we are getting the following error. The problem occurs only while refreshing the report.
    ERROR: a database error occured. the database error text is unable to connect to sap bw server incomplete logon data.. (wis10901)
    Regards

    HI ayur
    In the universe connection if the username and password is hardcoded then make sure those username and passwords are correct.
    else
    Make sure you are in the right BOX, for example if Universe is pointed to Prod, and you execute the report associated with that universe  in the Dev, then  that error will show up. So in universe connection find out to what BOX(dev, test, prod) it is pointed to and login to webI in the same BOX as universe pointed to and execute the report.
    It should work, if not please let us know.

  • Getting error while refreshing the Webi report

    Hi Guys,
    I am getting error, while refreshing Webi reports. Error like:
    A database error occured. The database error text is: Error in MDDataSetBW.GetCellData. Time limit exceeded.. (WIS 10901)
    Could anyone please reply.
    Regards,

    Hi,
    If it's not the universe limits, then I think you've hit the "MDX result contains too many cells" (more than 1million) problem.
    So, I suspect a long running query, no filters/variable restrictions, and You've probably got a dump in ST22.
    I don't know what BW you have, but if it is BW 7, do you have Enhancement Pack 01 and SP05<->10  ?
    You should check out all the latest corrections from component BW-BEX-OT-MDX
    the final proof of the pudding would be to enable MDA / SOFA log , capture the MDX SELECT statement and test it in BW MDXTEST - i bet you get the same error there.
    regards,
    H

  • WIS 10901 error while refreshing report in rich client

    I'm facing a strange issue while refreshing a report from Rich client. Here are details
    Environment: BO XI 3.1 SP3, Oracle application DB. Weu2019ve 2 BO servers (S1 and S2) on cluster and load balancer (common URL) in front.
    While login to S1 with 6400 port, I can refresh report in rich client.
    While login to S2 on 6400 port or using common url, during refresh gives below error u2013
    u201CA database error occurred. Database error text is: (CS) u201CDBDriver failed to load: C:\Program Files\.....\dbd_oci.dllu201D (The specified procedure canu2019t be found) (WIS 10901)u201D
    Iu2019ve installed oracle8i client on my system. Any idea what causing this issue?

    Yes. Oracle 10g client installed on both application server. I've teste the universe connection from server, it's working fine.
    Any idea what could be probable causes of "DBDriver failed to load: C:\Program Files\.....\dbd_oci.dllu201D error?
    One observation, the path of dbd_oci.dll is the BO installation directory of my local machine (on server BO is not installed on C drive). Why it's referring dbd_oci.dll from local client even in 3 tier mode?

  • Database Refresh errors in Planning 9.3.1

    Hi,
    While refreshing the database in planning 9.3.1, i am getting the below errors
    com.hyperion.planning.olap.HspVerifyOutlineException: Verify Outline failed with the following errors:
    **     Error [1042006] detected in member formula for member "Education Allowance".**
    **     Error [1042006] detected in member formula for member "Telephone Allowance".**
    **     Error [1042006] detected in member formula for member "Leave_Allowance".**
    **     Error [1042006] detected in member formula for member "Overtime".**
    **     Error [1042006] detected in member formula for member "Bonus".**
    **     Error [1042006] detected in member formula for member "Turnover Adjustment".**
    **     Error [1042006] detected in member formula for member "Social Security Tax".**
    **     Error [1042006] detected in member formula for member "Medicare".**
    **     Error [1042006] detected in member formula for member "112000".**
    **     Error [1042006] detected in member formula for member "112001".**
    **     Error [1042006] detected in member formula for member "112002".**
    Regards,
    PC

    Hi John,
    Thanks for the prompt reply..
    I checked the error code *1042006* in esb_err_msgs PDF, it showing the errors as "*Network Error message: Unable To*
    *Connect To serverName. The client*
    *timed out waiting to connect to the*
    *Essbase Agent using TCP/IP. Check*
    *your network connections.*"
    But, i am getting different errors in planning. As you suggested, i checked all the member formula. Its validating fine.
    I confused here, which i have to follow John...
    Thanks,
    PC

  • Problem in submitting data while refresh in web application

    Hi all,
    I have problem in submitting data while refreshing the page.
    In my application voucher number is generated automatically and as soon as number is genereated voucher detail is inserted in database for newly generated voucher number.
    Both of these activity done on the same page as my client want so.
    Now I have problem that while refreshing the page, the same data for incremented voucher number stored in database that should not be done.
    If there is any solution for this situation other than 1) Generating number in one page and inserting on another 2) block refresh activity, then please reply me.
    It's urgent. Your help will help me a lot.
    regards,
    Deepalee

    Hi
    <u>You can use either of the BADIs depending on your requirement.</u>
    BAdI Definition Name Description                                                                               
    BBP_PGRP_ASSIGN_BADI EBP Purchasing Documents: Assign Purchasing Group(s)       
    BBP_PGRP_FIND        Shopping Cart: Determine Responsible Purchasing Group(s)                                                                               
    BBP_DOC_CHANGE_BADI
    BAdI for Changing EBP Purchasing Documents
    <b>Please read the Standard documetation available with them using SE18 transaction in SRM system.</b>
    Which SRM version you are using ?
    Hope this will help.
    Please reward suitable points.
    Regards
    - Atul

  • Refresh Database

    Hi All,
    I have migrated hyperion 9.3.1 to 11.1.2 and i have some problem when refresh database to update essbase cube.
    I have 3 db and detacted in Manage Dimension> performance setting as Plan1, Plan2, and Plan3
    But when i refrash database only Plan1 created on Essbase.
    Could you please let me know how to created all db from Planning To Essbase?
    Thanks

    When doing a refresh from Planning, all databases are refreshed.
    Did you try doing a "Create" instead of "Refresh the first time? Be aware that if you have uploaded data in Plan1, it would get deleted with a Create Database. So be ready for that if you want to try this route.
    Cheers,
    Abhishek

  • OBIEE Plug-in for AWM error: Missing spread attribute for dimension\

    Hi,
    While trying to export a cube to OBIEE administrator using the AWM plugin for OBIEE we get the following error for a lot of dimensions.
    AWM version is 11.1.0.7.0B on a 11.1.0.7 DB
    ERROR: Missing spread attribute for dimension DAY_FLG at level ALL_FLAGS
    ERROR: Missing spread attribute for dimension DAY_FLG at level FLAG
    ERROR: Validation problems found for dimension DAY_FLG
    Dimension DAY_FLG will not have UDML generated
    As suggested in other forums I have created a long_desc attribute and selected the "created level attribute in views" option for all the dimensions in the cube, still the error persists.
    Please help.
    Regards,
    Abhishek
    Edited by: 866977 on Jun 20, 2011 3:30 AM

    Thanks for you response David. But I'm afraid this does not solve the problem. I did it to all the dimensions and the error on day_flg persists. I noticed that an error on one of the other dimensions thougfh has changed. Detailed error below:
    ERROR: Missing spread attribute for dimension DAY_FLG at level ALL_FLAGS
    To Fix error: In AWM on the attribute panel for the long description attribute of each applicable dimension -
    select the check box 'Create level attribute columns in views'
    ERROR: Missing spread attribute for dimension DAY_FLG at level FLAG
    ERROR: Validation problems found for dimension DAY_FLG
    Dimension DAY_FLG will not have UDML generated
    ERROR: Missing spread attribute for dimension HOUR at level ALL_HRS
    ERROR: Spread Attribute HR_LONG_DESC found but is not visible for level HR
    The dimension HOUR will be marked invalid and no UDML will be generated for this dimension or any cube dimensioned by this dimension.
    ERROR: Validation problems found for dimension HOUR
    Please help

  • Attribute calculation

    Hi ,
    I have a Material , it is having Attribute name called creation Date
    Now my requirement is i need add one year to the creation date but i dont know some how i could not do it
    please some one help me
    MATERIAL
    Creation Date
    launch year = creation Date + 1
    Thanks,
    GAL

    Tim,
    I now recall why the solution isn't as simple as dividing the calls attempted by 168. It's not the average hourly calls attempted for a given week that is needed. Instead, I need the hourly average calls attempted by hour of the day for a week (or for that matter any time range selected by the user). So, for example, I would need to produce a line graph containing avg calls attempted on the Y-axis and the 24 hours of the day as plots on the X-axis. Each of the 24 points on the graph would represent the average calls attempted for that hour (i.e., HR00, HR01, HR03....HR23) over a range of time that is selected. This is why I was attempting to utilize the "Hours" attribute dimension in the averaging calculation. All I'm attempting to do is mimic the attribute calc dimension automatically computed by Essbase, however, I need to SKIPNONE in the calculation.
    Thanks,
    Joe

Maybe you are looking for