Audiences with multiple "Reports Under" rules

I am creating an audience with multiple "Reports Under" rules with the "Members satisfy any of the rules" option.
Steps
Create the audience.
Choose Members satisfy any of the rules
Choose Reports Under and specify a value (manager one name).
Choose OK, then Add rule.
Choose Reports Under and specify a value (manager two name).
Compile.
Results
Only members of manager two's team are in the audience.
Remove manager two and compile. Now only members of manager one's team are in the audience. Now add some other attribute, such as Department contains, then include manager two's department name. Compile and you see that the audience now contains all team
members from manager one (reports under rule) and manager two's (dept contains rule) teams.
Can an audience contain multiple "Reports Under" in SP2013? I seem to remember doing this successfully in SP2010.

Hi Gilbert,
According to your description, my understanding is that the audience which was set to satisfy any of the rules cannot work correctly with Reports Under rules in SharePoint 2013.
I tested the same scenario per your post in my environment, and I got the same results as you got.
We will help to submit the issue to proper pipeline for you.
Again, thank you for your report which will definitely make SharePoint a better products. There might be some time delay. 
Appreciate your time and patience.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Similar Messages

  • Advise on using DBMS_XA with multiple branches under one global transaction

    Dear all
    I need some advise on using DBMS_XA from PL/SQL with tightly coupled multiple branches under one global transaction. Basically, I've successfully written some PL/SQL code that in 3 different sessions attaches to 3 different branches of one global transaction and before ending each branch they can see each others uncommitted data. So far so good.
    However, I'm not sure I completely understand how each branch must call xa_end, xa_prepare and xa_commit correctly using two phase commit and my calls result in errors like:
    ORA-24767: transaction branch prepare returns read-only (XA error code 3 = Transaction was read-only and has been committed)
    ORA-24756: transaction does not exist (XA error code -4 = XID is not valid)
    ORA-02051: another session or branch in same transaction failed or finalized
    This is the structure of my programs (3 SQL*Plus sessions):
    main: Uses xid 123|0 (branch 0 of global transaction 123). This should be the coordinator that commits using two phase commit across the 3 branches
    m1.xa_start tmnoflags
    m2.DML
    m3.Wait for thread A + B to manually be started and run xa_end
    m4.xa_end tmsuccess
    m5.xa_prepare
    m6.xa_commit false
    thread A: Uses xid 123|A (branch A of global transaction 123)
    a1.xa_start tmnoflags
    a2.DML -- thread A can see main and thread B's data
    a3.xa_end tmsuccess
    a4.xa_prepare -- required?
    a5.Should we also call xa_commit false?
    thread B: Uses xid 123|B (branch B of global transaction 123)
    b1.xa_start tmnoflags
    b2.DML -- thread B can see main and thread A's data
    b3.xa_end tmsuccess
    b4.xa_prepare -- required?
    b5.Should we also call xa_commit false?
    The failing steps are:
    m5
    m6
    a4
    a5
    b4
    b5
    Before starting calling xa_end I see 3 rows in V$GLOBAL_TRANSACTION, eg (hex 7B = decimal 123):
    FORMATID GLOBALID BRANCHID BRANCHES REFCOUNT PREPARECOUNT STATE FLAGS COUPLING
    203348753 0000007B 00000000000000000000000000000000 3 3 0 ACTIVE 0 TIGHTLY COUPLED
    203348753 0000007B 0000000000000000000000000000000A 3 3 0 ACTIVE 0 TIGHTLY COUPLED
    203348753 0000007B 0000000000000000000000000000000B 3 3 0 ACTIVE 0 TIGHTLY COUPLED
    Thanks a lot in advance.
    Cheers
    Finn

    OK, I've figured it out. This is poorly documented as it's not well explained how to handle the various return codes. Turns out that all but the last xa_prepare calls return dbms_xa.xa_rdonly (tightly coupled branches are combined -- "read only" optimization), the last one returns dbms_xa.xa_ok and this is when you should call xa_commit.
    Now my next problem is that DBMS_XA doesn't work from within jobs (DBMS_JOB and DBMS_SCHEDULER), which makes it very difficult to use DBMS_XA. My purpose of using DBMS_XA is to coordinate work across multiple sessions in one transaction but if I can't easily create the multiple sessions, I'm stuck.
    When called from a job, xa_start throws:
    ORA-24789: start not allowed in recursive call
    on Oracle 11.2. In Oracle 11.1 it works, but xa_end fails with
    ORA-25352: no current transaction
    so I guess in fact the xa_start call didn't really work either, even though it returned tm_ok.
    I'm now trying to find a workaround on how to use DBMS_XA from within jobs, please comment if you have any suggestions. Or if you have any suggestions on other means of establishing the concurrent sessions (I wouldn't like to resort to external programs that need username/password to connect as password management would be a security issue).
    Thanks in advance.
    Cheers
    Finn

  • Contacts with multiple numbers under the same labe...

    i
    I have many contacts which have numbers saved under the same label.
    For example a contact like this:
    First name: A
    Mobile: 11
    Mobile: 22
    Telephone: 33
    Telephone: 44
    When I open Ovi Suite / Contacts / Contacts in E51 and open the abovementioned contact "A" it shows:
    A
    Mobile: 11
    Telephone: 44
    Mobile (other): 22
    As you see it deleted one of "Telephone" labeled numbers. It also happened when I used PC suite.
    It is really annoying as if I save/sync the contact using Ovi, it causes loss of contacts data.
    BTW there is no problem using Backup/Restore function of Ovi/PC suite, nor "Copy to memory card" function of the phone itself.
    Ovi suit version : 2.1.1.1
    Nokia E51 v300.34.56
    Windows 7
    PS:
    tested another one with 6 different numbers under the same "Mobile" label
    the result in Ovi is:
    AA
    Mobile: 11
    Mobile (main): 33
    Mobile (other): 22
    the other 3 numbers were lost

    atammin wrote:
    Ah, you have an interesting setup here.
    Could you answer a few clarifying questions regarding this.
    > When I open Ovi Suite / Contacts / Contacts in E51 and open the abovementioned contact "A" it shows
    * Did you perform a sync? Or did you just connect the phone and look at the contact card in the phone view?
    I had performed sync before and realized that some contact data are missing in my phone, so I started investigating to see exactly which contacts are affected by creating some dummy contacts and editing them by clicking on my phones icon below the window of "Contacts" tab in ovi.
    * Did you check the contact in your phone (using the phone's UI)? Were all the details there - or are you saying that Ovi Suite lost some of the details?
    In fact both. Ovi fails to extract and show some numbers and thus fails to write them back to the phone correctly. The lost details are purged from the phone too.
    Just to confirm I've understood the scenario correctly
    1) you have contact card in phone with two mobile numbers  (same label) and two telephone numbers (same label)
    yep
    2) you sync with Ovi suite
    Either Sync or directly open and save contact.
    3) the mobile numbers have been re-labled  to Mobile and Mobile (other) but the numbers are preserved
    They are re-labled only when viewed in Ovi, but  written back to the phone with the same "Mobile" lable as created on the phone.
    4) one of the Telephone numbers is completely lost from Ovi Suite and phone.
    And this scenario happened with this setup:
    - Ovi suite version : 2.1.1.1
    - Nokia E51 v300.34.56
    - Windows 7
    I just want to be clear on the setup and scenario so we can investigate.
    thanks, Aki
    I also done another test
    This is the contact created in phone:
    BEGIN:VCARD
    VERSION:2.1
    N:;A
    TEL;CELL:11
    TEL;CELL:22
    TEL;CELL:33
    TEL;CELL:44
    TEL;CELL:55
    TEL;CELL:66
    TEL;VOICE:11
    TEL;VOICE:22
    TEL;VOICE:33
    TEL;VOICE;HOME:11
    TEL;VOICE;HOME:22
    TEL;VOICE;HOME:33
    TEL;VOICE;WORK:11
    TEL;VOICE;WORK:22
    TEL;VOICE;WORK:33
    X-CLASSrivate
    END:VCARD
    And this is what happens to contact when I just click edit and then save in Ovi.
    BEGIN:VCARD
    VERSION:2.1
    N:;A
    TEL;CELL;PREF:11
    TEL;CELL:33
    TEL;VOICE:33
    TEL;VOICE;HOME:33
    TEL;VOICE;WORK:33
    END:VCARD
    I also attached what ovi shows about this contact as an image.
    Attachments:
    displayed in ovi.PNG ‏9 KB

  • Multiple report servers - with different uifont.ali

    Can we have multiple report servers with different NLS_LANG?
    They all should be started as windows service. Also I would like to have them look at different uifont.ali. The reason is that we want to have the same report run with different fonts in different languages. This way I can map the fonts in uifont.ali as I want.
    Is it possible?

    I don't think this is possible with multiple reports servers with one Oracle 9iAS home. You will have to install multiple 9iAS, in different Oracle homes.
    This also means that you have different URL's (port numbers) for the two environments.
    I have used this configuration before to install a test and production environment on one web server. Changing the conf files, variables etc. in the test environment doesn't influence the production environment that way.

  • Can we use the built-in Row fetch for Multiple reports in a page?

    I need to create a page with multiple report regions. Each of it is based on a table. Those tables are different. I somewhat remembered that we can NOT use the built in automatic row fetch process if there are multiple report regions, neither the built in DML process. You have to make your own fetch and insert/update/delete process if you intend to.
    Also if I write my own row fetch and update processes, do I have to consider lock mechnism? or just simply write select and insert/update?
    Any input is appreciated.

    I think I found the answer. Would Scott or other gurus take a look at the thread and confirm it, in case the limitation is not in 2.0?
    Re: automatic row fetch
    What I am concered about is that the locking mechanism. If I have to write my own process to fetch and insert/update, other than the regular select and insert/update statements, do I have to put commit by myself, or htmldb can handle it automatically? Is there an example for this?
    Thanks in advance.

  • Visual Source Safe keeps checking out my .cs file associated with a report

    Hello there.
    I am new in this community and I need some help. I am part of a team that works with Crystal Reports under .NET framework and we are using Ms Visual Source Safe. Any time we open a solution (.sln file) all .cs files associated  with a Crystal report are checked out. This, of course, drives all of us crazy. If I try to delete the .cs file, it is added automatically. And we could not find any solution to this problem.
    I compared the 2 .cs files (before and after check out) and the indeed differ. The namespace , to be more specific is different.
    I believe the problem is that we are using a separate project that contains the report files and then those .rpt files are added as links to the main project.
    So ... my question is... is there anyway I can tell Sourcesafe or Crystal report or any other program, application or person to stop checking out my .cs files or stop modifying them?
    Thank you.

    Hello  Don.
    Thank you for your answer.
    It seems I have SP1 already installed. I am referencing the following files with versions in my report project:
    CrystalDecisions.CrystalReports.Engine v12.0.2000.0
    CrystalDecisions.Enterprise.Framework v12.0.1100.0
    CrystalDecisions.Enterprise.InfoStore v12.0.1100.0
    CrystalDecisions.ReportSource v12.0.2000.0
    I personally believe that the problem is with the link files.
    To be more exact, I have several projects (csproj) that handle all reports and report loading. I also have several applications that refer these projects (not all in the same time). Because all .rpt files are loaded at runtime, I made these files Embedded resources and I created a folder in the main projects named Reports where I added all .rpt files as links.
    When I open main application A solution, all .cs files associated with the .rpt files are checked out (the namespace is modified to A).
    When I open main application B solution, all .cs files associated with the .rpt files are checked out (the namespace is modified to B).
    And so on.
    And since we are a team of several developers working with all main applications, this is rather annoying.
    I hope this presents my situation a little more clear.
    Any ideas?
    Thanks again

  • Dynamically hide/display multiple report regions.

    Hi,
    I need to build a dashboard like homepage for users with multiple report regions. Users should be able to pick the regions they want and the display point for those regions.
    Is this possible?
    Thanks in advance

    Hello Asha,
    I think the "where" part would have to come from CSS. If you visit http://apex.oracle.com/pls/otn/f?p=49882:3653 you can see a couple of HTML type regions which I placed using div tags and putting something like<div class="rpt_query" id="rpt_query">in the region Header and </div> in the region footer. You can accomplish the same with Report type regions and maybe any type of region.
    As for whether or not a region is shown, that can be done in the Conditional Display attributes. I do this by selecting "Value of Item in Expression 1 = Expression 2" as the Condition Type, a hidden page item as Expression 1, and a number (perhaps corresponding to check box as mentioned previously) as Expression 2. I'm actually using pseudo tabs and when a user clicks one of the tabs it changes the value of the hidden page item and submits the page to get the new region to show up.
    Hope this helps,
    Gregory

  • HT204053 Can I set up icloud services on multiple iphones under a single account? More specifically, can I use- find my iphone services -under one account?

    Can I use Find My iphone service with multiple iphones under one account? I have 4 iphones in my family and I want to monitor all phones by logging into one account!

    You can create and use different iCloud accounts on the same computer, whether they are single or multiple user.
    There is a limit of 3 accounts you can create from a device but I thought this was only iOS devices - maybe not.
    iCloud accounts can only be created using a valid email address, so I guess I'd start there to retrace what accounts you have.
    My Apple ID and iForgot.com may be useful sites for you.

  • Creating Profile type report that hold fields with multiple values

    Really hoping someone can please help me out as I am very new to Crystal Reports.
    We use Maximizer CRM and we have been in need of some custom reports to rule out risk for regulators. I contacted Max and they suggested the only possible way is to create through Crystal. Its been almost one month already and I still cannot for the likes of me get this report operating properly. I have been inside and out on all sorts of forums, posted topics but no luck! So I will give it one more attempt in hopes that one of you geniuses can show me the way.
    In Maximizer CRM there is date, numeric, alphanumric and table. Our table fields items can be set to either single value or multi-value. So in crystal i did a default join of Client.tbl and the user-defined fields from view and joined the client id and contact number from all the view fields to client table. See Image:
    and I have dragged all the relevant fields in rows (in details section) rather then columns because we would be reporting on more then 1 record at a time. My problem is - If there is a table with multiple items selected (values), the records triple in count and it will show the same record over and over with just single field value changing at a time.
    The formula field you see in the image is from when I posted a discussion and Abhilash assisted me by providing the formulas I should add:
    1) Create a formula with this code and place this on the Details Section:
    whileprintingrecords;
    stringvar s := s + {field_with_multiple_values} + ", ";
    2) Next, move all the fields (except the formula field above) from the Details section to the Report Footer
    3) Create a formula with this code and place this on the Report Footer. This field would replace the existing field that contains multiple values:
    whileprintingrecords;
    stringvar s;
    Left(s, len(s)-2);
    This method is not working out for this type of report. When I add the formula Crystal is still counting my 2 records as 5 records but I can only view it as a single record and the multi-field has all the values for both records and displaying as a single record. See image:
    Can anyone please assist and advise where I am going wrong?
    -Jared

    Hi Jared,
    Thanks for taking down memory lane that is Maximizer.  Nice to see their table structure hasn't been simplified in the last 20 years.
    If I understand what's happening, you should only see 2 records and not 5.  That means your joins are creating duplicate records.  For now I'm going to skip over trying to optimize your query because I still have bad dreams of linking Maximizer tables.
    There are a couple of ways to work around the duplicates, one is to create a group and instead of having your formula in the Detail section, put it in the Group Header.  The question is what would you create your group on that would get you a unique record?
    If you know where the duplicates are coming from, create a Record Selection Formula that will remove the duplicates.
    There is also the menu option Database | Select Distinct Records.  I've never really had success with this one but there's no harm in giving it a shot.
    I would have you try and find which table or combination of tables is generating the duplicates but that requires playing with your links.  Normally I'd start by adding one table at a time and dropping one field onto the report.  If it doesn't repeat then add another table and field and repeat until you get your duplicates.  Once you know where they are coming from then you can either drop that table from your query or create a selection formula that removes the duplicates.
    Good luck,
    Brian

  • Design a single template for multiple reports with different column order

    Hi,
    I need to migrate the existing reports from SQL Server Reporting Services to Crystal Report 2008, and the column order in the report is very important to the clients since clients have existing code to ingest these reports into their database. Now I want to create a single template with lot of parameters for all reports. My question is how I might use one template to create multiple reports with different column orders in the reports?
    For example, client A has the following column order in their report: firstName, LastName, DateBirth, SSN. Client B has the following column order in their report: SSN, DateBirth, LastName, FirstName. Can I use one template to create these multiple reports?
    Thanks in advance.

    -As I mentioned you can find Template Field object in Insert menu of crystal report Designer 2008.
    As soon as you select Template Field object you will be able to see a box beside ur mouse cursor. Drag and drop this box at required place. Now when you place this object in report you will get some thing like this "<TemplateField1>" listed under Formula Fields tree. Double click "<TemplateField1>" formula to add your conditions.
    -I have not tested it for large amount of Customers. However as the number of customer increases the number of conditions will get increased.
    For the customer that want the same ordering of columns you can put those customers under one condition.
        for Example...
              if(?Client in ['clientA','clientA']) then
                        <TableName>.<Field>......
    -What do you mean be 40 columns? Do you mean 40 fields or you want to show 40 columns in report? Please elaborate.
    Regards,
    Amrita
    Edited by: Amrita Singh on May 21, 2009 7:54 AM

  • Report for CS15 tcode with multiple material nos. in selection screen.

    I want to develop a report for cs15 but with multiple materials.
    Like in cs15 we enter the material and its plant, then click on multi level check box and get the output. But cs15 works only for a single material. I want to develop a report in which i'll give multiple material nos. and then i should get the output for each material entered just as the output that would appear in cs15 for that material.
    How do i do it.
    I have tried but i'm not able to track back.

    Hi Priti,
          try develop a interactive report which lists all the materials in the first screen and when you double click on each of the material then call transaction CS15 output by skipping the first screen .Use set parameter to pass the material .
    Regards,
    Sirisha

  • Report printing in excel with multiple sheets

    Hi Experts,
         I am working in Oracle Reports 10g.  I need to print the report in Excel....
    For this i have created .JSP file and now printing in Excel(Sheet1).
    My requirement is i need to print the report in multiple sheets.
    For example if i run the departments report then the generated excel file should be as below
    (Sheet1 - HR, Sheet2 - FINANCE, Sheet3 - MARKETING, etc.,)
    How can i do this?
    Thanks in Advance.

    Hi All,
       Is this possible  Report printing in excel with multiple sheets??
    Please give solution for my above post Report printing in excel with multiple sheets..
    Thanks,
    Su.gi

  • Report with multiple Detail Area

    Hi All,
    Please see the Report pointed to the link below:
    [Report with multiple Detail Area|http://us.share.geocities.com/felix5ac/fairway.jpg]
    Some Explanations:
    ========================
    (1) The line with "ABCDEFGH..." is variable data coming from the database in the Detail Area
    (2) The lines with "WBLNX'" "123, 123.12", 
                             "WBLNX'"
       are variable data associated with the same Heading: "ABCDEFGH..."
    (2b) There can be multiple lines of data in the detail area (i.e. 1 or more "ABCDEFGH..." and the associated WBLNX and numbers...)
    (3) Item Code Descriptions ==> is a Header Info
    (4) ARL ... and FPHI... ==> are variable data and lines in these area can be 1 line; it can be 4 lines; it can be 10 lines...
    (5) Lines FROM "Artwork Procedures..." to the the end of the page are static.
    QUESTION:
    ===================
    How do I best design these Report with the multiple detail areas? Again, please see link of the Report above...
    Thanks and Best regards,
    Felix

    Hi Felix
    You can place the less detailed fields in the regular sections of the report and wherever you require multiple lines you can use the subreports.
    Hope this helps.
    Regards
    Nikhil

  • CMS crash with core files and multiple report output generation

    Happy new year to everyone,
    Our BOXIR3.1SP6FP2 env has recently started behaving weirdly by triggering multiple output to users inbox and email notification out of scheduled reports. Also we have noticed the CMS crash with core file (almost 4GB) generation at the time of multiple report output.
    Most of the times, CMC crashes and recycles itself. At few times, CMS services alone went shut down.
    OS details: RHEL 5.5, 32 GB RAM, 8 core processor on each of the clustered node, Oracle 10GR2.4 CMS DB server, 11GR2.4 oracle reporting DB server and oracle 11.1.0.6 client.
    2015/01/21 23:54:37.946|>=| | |28123|1534131088|{|||||||||||||||DBQueue::Read
    2015/01/21 23:54:37.946|==| | |28123|1496185744|
    |||||||||||||||(OracleStatement.cpp:156) Prepare: SQL: SELECT ObjectID,
    Version, LastModifyTime, CRC, Properties FROM CMS_InfoObjects6 WHERE ObjectID
    IN (1004050) ORDER BY ObjectID
    2015/01/21 23:54:37.946|==| | |28123|1496185744| ||||||||||||||(OracleStatement.cpp:183) Prepared statement Execute
    2015/01/21 23:54:37.965|==| | |28123|1496451984| |||||||||||||||SResourceSource::LoadString 50293
    2015/01/21 23:54:37.966|==| | |28123|1496451984| |||||||||||||||SResourceSource::LoadString Unknown exception in database thread
    2015/01/21 23:54:37.967|==| | |28123|1496451984| |||||||||||||||SResourceSource::LoadString 33007
    2015/01/21 23:54:37.967|==| | |28123|1496451984| |||||||||||||||SResourceSource::LoadString CMS is unstable and will shut down immediately. Reason: %1...
    2015/01/21 23:54:38.506|==| | |28123|1496185744| |||||||||||||||(OracleStatement.cpp:156) Prepare: SQL: SELECT ObjectID,
    Version, LastModifyTime, CRC, Properties FROM CMS_InfoObjects6 WHERE ObjectID IN (1009213) ORDER BY ObjectID
    2015/01/21 23:54:38.506|==| | |28123|1496185744| |||||||||||||||(OracleStatement.cpp:183) Prepared statement Execute
    2015/01/21 23:54:38.512|==| | |28123|1455592672| |||||||||||||||(sidaemon.cpp:549) SUNIXDaemon::run: server restart flag is 1..
    2015/01/21 23:54:38.513|==| | |28123|1455592672| |||||||||||||||(sidaemon.cpp:552) SUNIXDaemon::run: in abort ...
    2015/01/21 23:54:38.513|==| | |28123|1455592672| |||||||||||||||(sidaemon.cpp:555) SUNIXDaemon::run: doing the WithAbort case ...
    2015/01/21 23:54:38.520|==| | |28123|1496185744| |||||||||||||||(dbq.cpp:1357) DBQ: Time required to read 1 objects: 20.000000 ms
    Thank you,
    Karthik

    Hi Denis,
    I'm trying my best for the last few weeks to understand the core issue along with SAP however it is still a mystery.
    >Ulimit -a
    core file size          (blocks, -c) 0
    data seg size           (kbytes, -d) unlimited
    scheduling priority             (-e) 0
    file size               (blocks, -f) unlimited
    pending signals                 (-i) 270335
    max locked memory       (kbytes, -l) 32
    max memory size         (kbytes, -m) unlimited
    open files                      (-n) 1024
    pipe size            (512 bytes, -p) 8
    POSIX message queues     (bytes, -q) 819200
    real-time priority              (-r) 0
    stack size              (kbytes, -s) 10240
    cpu time               (seconds, -t) unlimited
    max user processes              (-u) 270335
    virtual memory          (kbytes, -v) unlimited
    file locks                      (-x) unlimited
    Below is the observation as part of troubleshooting:
    1. CMS breaks at threshold of 3.9 G.
    2. CMS DB sits in a different Linux server than BOE server.
    3. All core files were generated by boe_cmsd process and are almost 4GB in size (same as max threshold which it breaks).
    4. Shell script which I've added in the BOE servers shows that the CMS DB is available/connecting at the time of CMS crash.
    5. SAP analysed the Core files and skeptical about the below lines.
         #3  0x58687b80 in skgesigCrash ()
          from /opt/oracle/product/11.1.0/client_1/lib32/libclntsh.so
         #4  0x58687e0d in skgesig_sigactionHandler ()
    I'll continue troubleshooting with a hope to fix it at the earliest.
    Thanks,
    Karthik

  • How to generate a report in Excel with multiple sheets using oracle10g

    Hi,
    I need a small help...
    we are using Oracle 10g...
    How to generate a report in Excel with multiple sheets.
    Thanks in advance.
    Regards,
    Ram

    Thanks Denis.
    I am using Oraclereports 10g version, i know desformat=spreadsheet will create single worksheet with out pagination, but my requirment is like the output should be generated in .xls file, and each worksheet will have both data and graphs.
    rdf paperlayout format will not workout for generating multiple worksheets.
    Is it possible to create multiple worksheets by using .jsp weblayout(web source) in oracle reports10g. If possible please provide me some examples
    Regards,
    Ram

Maybe you are looking for