Audigy 2 ZS: Cannot save setti

Hi,
my problem is: after each start of my PC, I have to open
- Equalizer
- EAX-Console
- Speaker-settings (here I have to recalibrate the 5. speakers, so that my rear speakers will work.)
I made profiles, they are saved, but they aren't acti've after restart. This, especially the calibrating of the speakers, is very disturbing.
My speakers: Teufel Concept E Magnum
The files in the creative folder are all NOT read only!
Thanks in advance
Rolf

I have the same problems if i update the drivers. If i use the original drivers from the cd, the settings are saved. But if i update the drivers, then i must change the settings everytime i login in Windows.
Try to install the older drivers from the cd (if you have the newer drivers).
I like to get an answer for this problem, about updating the drivers and the settings i like, are not there at the next boot.
Creative?

Similar Messages

My calendar will no longer let me add new event or delete them, it comes up with an error saying "cannot save event, no end date set" or "event does not belong to that event store". can anyone help with this?

my calendar will no longer let me add new event or delete them, it comes up with an error saying "cannot save event, no end date set" or "event does not belong to that event store". can anyone help with this?

Hi,
To configure your ODBC DataSource, go to Control Panel ---> DataSources(ODBC) (If you are in a Windows environment).
Select the tab System DSN. If you have not added your data source, then do so by clicking on the Add button. If you have added the datasource, click on the Configure button to configure it.
Give the datasource name, then the database name.
You have to give the hostname, service name and server name. I guess, in most cases, the datasource name and host name will be the same, service name and server name will be the same. If you are using TCP/IP, the protocol will be onsoctcp.
There will be a file named Services under C:\WINNT\system32\drivers\etc where you have to give the port number for accessing this server.
It will be like this <service name> <portnumber>/tcp
Hope this helps...
best wishes,
Nish

"cannot save event. no calendar has been set." what does this mean and how do i fix it?

I keep getting the error message when I try to enter a new event or edit an existing event to my calendar:
"Cannot save event. No calendar has been set."
Any ideas on how to fix it? VERY inconvenient!
Thanks.
txwyrick

Well, there's a lot we don't know ... for example, if you have actually set up a calendar somewhere you're trying to sync to.
Anyway, with no other information than what you provided, here's a possible troubleshooter:
iCloud: Troubleshooting iCloud Calendar

How to set document cannot save as in content Management in Portal

Dear Sir,
Is it possible to set document in content managment in Portal cannot "save as" in content Management in Portal, because our requirement need cannot save and save in document.
Please advise.
thank you and best regards,
Vimol

Hi,
Content Administration -> Portal Content--> double-click the role you want to set priority to- click properties and find Sort Priority.
Refer this link, it will explain you...
http://help.sap.com/saphelp_nw04s/helpdata/en/92/3e703e632c7937e10000000a114084/frameset.htm
Regards,
Senthil K.

I have lost my calendar and now I cannot add events to it. I keep getting cannot save event no calendar has been set.

I have lost my calendar and now I cannot add events to it. I keep getting message "cannot save event no calendar has been set."

Maybe you need to Tap the Calendar Button in the upper left corner of the calendar app and select a calendar in which to add the event.
Do you have. + sign in the lower right corner of the App? If not go to Settings>iCloud>Calendar>On. If you want to sync the calendar with iCloud, leave it set to on. If not, then set it to Off.
Or try this of those suggestions don't work.
Close all app scompletely and reboot the iPad. Go to the home screen first by tapping the home button. Double tap the home button and the recents tray will appear with all of your recent apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

All of a sudden I cannot save events to my calendar. It says a calendar has not been set. Any ideas?

All of a suddent I cannot save events to my calendar on my iPhone 4. It says a calendar has not been set but my calendar is checked.

Have you tried to Enable and Disable Restrictions? Go to Settings > General > Restrictions.

Cannot save email attachments to folders in Finder

Ughhh, I'm getting a sinking feeling.... It's happening again.
Ever since I installed Mavericks back in June of 2014, I've had nothing but problems. In fact, the actual install (perhaps coincidentally, I'm told) caused my hard drive to fail in mid-install, even though it was only 2 years old. Apple Care cheerfully paid for the new hard drive and installed Mavericks for me, but ever since my previously fast, responsive computer has been incredibly sluggish, lots of beach balls, tons of problems with things like the one I'm experiencing again today -- can't save email attachments to folders in Finder (the computer behaves as if the save was successful, but when you go look in the Finder later, you discover it was never saved anywhere). Also, I can't create any new folders because it says the location is Read Only (I've tried various file locations -- same result).
Since June, after countless visits to the Genius Bar and all sorts of attempts to fix the accumulating problems, the Genius erased my User Library last December in a final attempt to get the computer to work right before my Apple Care ran out. It was one of many attempted fixes that would actually work pretty well for a few days, but then the problems would accumulate again.
Last week, Word kept crashing. I took it to the Genius Bar and the June 2014 hard drive failed a diagnostic test. Even though Apple Care had expired, Apple replaced the hard drive for free because they could see the long list of notes from all of the visits I had made to the Genius Bar. I restored everything and, although it seemed to be working okay at first, I was still getting a lot of beach balls. Sometimes it can take 30 seconds to open a Word document, even if the application is already open. (FYI, I don't keep a lot of applications running.) But at least it was working. Today, however, I'm seeing some of the old familiar problems creep in. I cannot save email attachments to a folder. I cannot create new folders. I've tried restarting the computer multiple times. All of this was working fine as recently as yesterday.
1. Am I doing something that is causing this? This is my sixth Mac and I've never a serious problem with ANY of the others (including one that I bought USED) and I use them at least 8 hours a day. As far as I know, I'm doing everything the same way I've always done it.
2. Has anyone else encountered this "Read Only" problem and do you know how to fix it? I'm starting to think this is just a bad computer and that this is a symptoms that something is very wrong again.
3. Do I simply need to start over with a brand new computer (although, frankly, I'm scared to restore everything onto a new computer and risk "infecting" the new one). This is my work computer and I am self-employed, so I really cannot afford to be running to the Genius Bar once or twice a week any longer. Any advice? It's a MacBook Pro that I bought in December 2011. According to the stats, I'm using 354.68 GB of my 499.25 GB storage capacity.
Sorry this is so long. Just trying to give the context.

Hi:
Of course this is possible on SharePoint Server 2010 and is a very nice functionality, in this link (http://www.sharepointboost.com/blog/setting-up-sharepoint-2010-incoming-mail/)
you can find a detailed information of how to set up the incoming email o SharePoint 2010 document library step by step.
I hope this helps
Please mark as answer if helps you

My Calendar on my iPhone won't allow me to save any events. It says "cannot save event" does anyone know how to fix this issue?

After updating my phone earlier this month to the 5.1 software my calendar won't let me save any events. It displays "Cannot save event" I have tried googling the error and I have tried restarting the app, restarting my phone and even cutting the calendar off and back on....nothing has worked. Any other suggestions???

Select the drive and Finder > Get info and at the bottom "ignore permissions on this volume"
You can copy the files, but the ownership on the files still belongs to the other user account, once your done copying, then perform a #6 Reset Users Permissions and that will set all the ownership to that account.
..Step by Step to fix your Mac
Another method is to copy the entire folder, then change it's permissions.

Cannot Save File because of disk error

I selected 4 RAW images in Lightroom and chose the Merge to Panorama In Photoshop. After the file was created and I cropped it to my desired dimensions I tried to perform a simple save. I was asked what name to give the file and I went with the default settings and clicked OK on the Maximize Compatibility dialogue but I get an error that said "Cannot Save XXXXXX.PSD because of a Disk Error.
There are no details and not other options to find details. The drive these images came from have permissions set to Read and Write so I don't know what the issue is.

Your OS has reported a disk error - which usually means that there is a serious problem with the disk.
Photoshop is just passing along the error it got from the OS.

Cannot save a bookmark to NEW folder - FF wants me to rename EXISTING parent folder

I cannot save a bookmark to a new folder. This is the path I am taking from the main menu:
Bookmarks | Bookmark This Page
Click the drop-down arrow to the right of Folder
Select Choose
Scroll to the parent folder in which I would like a new subfolder
Click New Folder
Then, instead of creating a new folder as it always did in the past, it highlights the parent folder for editing. If I type in a new folder name, the parent folder is changed to that new name. A new subfolder is created with the name New Folder.
Things I have already tried that did *not* resolve the problem:
- Deleting and then restoring bookmarks from a saved bookmark backup file.
- Running the Add-On "Places Maintenance"
- Rebuild "Places" database
I have not yet reset Firefox or created a new profile but can try that if you gurus think that would help.
I am using FF 32.0.2 on Win XP SP3.
I have hundreds and hundreds of bookmarks, but from what I have read, there is no max size limit.
Thank you in advance!
Carol

Cor-el, thank you very for your reply.
I started Firefox in Safe Mode. The problem still occurs in Safe Mode. My understand is if the problem persists in Safe Mode, it is *not* being caused by an extension, theme or hardware acceleration. Other possible causes could be plugins or changes made to Firefox preference settings, which are not disabled in Safe Mode.
As you suggested, I did check Add-ons > Appearance. (I don't think I have ever had any Appearance other than the default theme.) It was and still is set at Default 32.0.2 By Mozilla. Since the bookmarks problem persists in Safe Mode, I think we can rule out this as the cause anyway.
All of my Plug-Ins are up-to-date except iTunes Application Detector 1.0.1.1. Status is "unknown". I have all Plug-Ins set to "Ask to Activate" or "Never Activate". None of them are set to "Always Activate".
My cache, cookies and history have been cleared. I have rebooted my computer.
Per your instructions, I did *not* reset Firefox. Should I reset Firefox or reinstall Firefox?
The bookmarks problem still occurs.
Thank you so much!
Carol

Windows 8.1 enterprise screen saver custom time wont save setting??

i have no idea why i cannot save time settings for my screen saver. it keeps the same time default no matter what. any ideas how i can custom set this?
very annoying.
system specs:
OS Name   Microsoft Windows 8.1 Enterprise
Version   6.3.9600 Build 9600
Other OS Description    Not Available
OS Manufacturer   Microsoft Corporation
System Name
System Manufacturer   MSI
System Model   MS-7642
System Type   x64-based PC
System SKU   To Be Filled By O.E.M.
Processor   AMD Phenom(tm) II X4 965 Processor, 3400 Mhz, 4 Core(s), 4 Logical Processor(s)
BIOS Version/Date   American Megatrends Inc. V1.8, 12/24/2010
SMBIOS Version   2.5
Embedded Controller Version   255.255
BIOS Mode   Legacy
BaseBoard Manufacturer   MSI
BaseBoard Model   Not Available
BaseBoard Name   Base Board
Platform Role   Desktop
Secure Boot State   Unsupported
PCR7 Configuration   Binding Not Possible
Windows Directory   C:\Windows
System Directory   C:\Windows\system32
Boot Device   \Device\HarddiskVolume1
Locale
Hardware Abstraction Layer   Version = "6.3.9600.17196"
User Name
Time Zone
Installed Physical Memory (RAM)   8.00 GB
Total Physical Memory   7.50 GB
Available Physical Memory   4.28 GB
Total Virtual Memory   8.69 GB
Available Virtual Memory   5.81 GB
Page File Space   1.19 GB
Page File   C:\pagefile.sys
A hypervisor has been detected. Features required for Hyper-V will not be displayed.

Hi boadiceaa,
Is the machine in a domain environment ?How did you configure the screensaver ?
Usually we can configure it here .
Right click the blank desktop ,choose personalize ,screensaver.
There is a registry key we can configure the timeout of the screensaver .
HKCU\Control Panel\Desktop\ScreenSaveTimeout
If it is a domain environment ,please check whether the screensaver group policy has been configured.
We can run "rsop " to have a check .
We also can try to configure it from the group policy
Screen Saver timeout
https://technet.microsoft.com/en-us/library/cc961876.aspx?f=255&MSPPError=-2147217396
If the issue persists, we can try to login with another account and configure it to have a check .This will help us to narrow down whether this issue is caused by the specific account .
Best regards
im not exactly sure what you mean by domain but its for my home network, just simple SOHO. ive tried using another user account to change it but it doesnt matter what it only goes to 15 mins max time.
youd suggest i look into the registry for starters or?
thanks again for the reply

Cannot Save Export Presets PPro CC2014 (also in AME CC2014)

I cannot save any export presets in Premiere CC 2014 (PPro CC 2014) or import any presets. Also applies to Adobe Media Encoder CC 2014 (AME CC 2014).
When I go File > Export > Media (or ⌘E) and set my format and output specs, I cannot save the preset. The preset says "custom" and then I hit the "save preset" icon. Type a name in the "Choose Name" dialog box, then click OK. The "Choose Name" dialog box disappears, but nothing happens. The preset line still says "custom" and there is no preset file available to choose. The preset is not saved. Export works, but the settings must be manually entered each and every time.
I also cannot import any presets. Have .EPR files with presets that I've used in the past and NONE of them will import using the "import preset" icon.
The presets will also not import into AME CC 2014 via any method at all - icons, dragging/dropping, copying to various directories... cannot load them. I cannot add them to the user presets & groups at all, no matter what method I have tried. It's frustrating and becoming infuriating. I can create a "New Group" in the user presets and groups, but nothing can be added to the group. Clicking the + for "create new preset" does nothing - no window opens or appears. Clicking "import presets" opens the "import preset" dialog box and I can choose files and click open, but they do not import or appear anywhere withing AME CC 2014.
3.33 6-Core "Mid-2012" running OSX 10.9.4 with GTX 680 (official version) and 32GB RAM
Also see this discussion:
AME CC 2014: "Adobe Media Encoder has encountered an unexpected error and cannot continue."

This was not directly a permissions issue. Had checked that numerous times previously and applied settings to all enclosed items on every folder that was related. This workaround was attempted several times previously, but had not worked. Now, it's working.
Re: AME CC 2014: "Adobe Media Encoder has encountered an unexpected error and cannot continue."
I will say, what I did differently this time was trying to edit the Adobe Media Encoder CC 2014.app via Show Package Contents before attempting to do any of this. Not sure if that's why it suddenly worked or not, but worth mentioning.

Cannot save form although I've enabled the rights using Acro 8 Pro

I created a form in Acrobat 8 Pro (using the 30 day trial, trying to see if I can do it first as suggested I can before I buy). I prepared the form in the design mode, I enabled it with save (and other) capabilities for Reader (under the advanced menu), but when I test it by opening it in Reader 6.0 (latest version I have), I am not able to save it.
Do I need to have a later version of Reader? My customers likely won't.
In reader, I type into it and get the pop up telling me I cannot save anything typed into the form, etc. etc. I try to click the SUBMIT and PRINT buttons I enabled while in Acro 8 Pro, nothing works.
Have I missed a step ... or 5????
Would like this capability, cannot for the life of me figure out how to get it to work! I would buy the software if this was possible, and can make good use of the 500 and under document rule in the EULA.

I created the form using Live Cycle Designer b/c that was how Adobe prompted me to create INTERACTIVE forms that would be able to be assigned privilges. From your comments (Steve Foxall), it seems I do have the option but didn't take it. I will look into that also.
Aandi - I set up the submit and print through the Designer wizard-system and provided an email address (which works when I open the document using Acro 8 PROFESSIONAL, but not READER).
I have tested it in Reader 7 and 8, it works in both. But not 6, it seems. Same form, no changes. Hmmm.

Cannot Save Word files as a PDF in Office 2013 with Office customization tool

Hello
I'm deploying office 2013 as a part of a post clone task. Using the customization tool I created an msp with the full installation (without outlook,Link, or skydrive) I noticed that I cannot save or export files as PDF files. If I do a manual
install (without MSP) I can save files as pdf. I can't find anywhere in the customization tool that allows me to choose different "save as" file types. In office 2010 I used to be able to save word files as PDF files. Any ideas would
be greatly appreciated.
Charles

Hi,
In regarding the issue, could you give me more information? Did you test to install the Office 2013 by using MSP and manual installation in the same computer? Did the other Office suits can not save files as pdf?
Let's do some test to narrow down the issue:
If you use the only one computer to test, please export a new MSP file include all the suits and use the all the default setting. Then we follow the
link to deploy again.
If the issue still exists, please try to change a computer, and update Adobe programs to install the new MSP file to test.
If you get some error message when you save as pdf through Word, please upload, I'll do more deeply research.
Regards,
George Zhao
TechNet Community Support

Help Cannot Save As File

I'm a brand new InDesign user. Have had one class and am expected to do all types of collateral here at work. I've opened files, started designing but when I click Save As, the whole thing freezes up. The only way out is to cancel through the task manager. I have InDesign CS3 running on Microsoft XP. The same thing happens if I try Save As in Photoshop. I am not going to be very effective if I cannot save my work. I am in marketing and not a techie. So if any one could help me without having to know a tremendous amount about program set up it would be greatly appreciated.
C-

Bob:
Thanks for getting back to me so quickly. Actually, Escape does get me
back to work. Unfortunately, I do not know if my monitor is set to
native resolution.
C-
From: BobLevine [email protected]
Sent: Thursday, February 25, 2010 1:48 PM
To: Carolyn Doran
Subject: InDesign Help Cannot Save As File
Sounds like the save dialog is off the screen. Does escape get you back
to work? Is your monitor set to native resolution?
Bob

Audigy 2 ZS: Cannot save setti

Similar Messages

Maybe you are looking for