Audigy2 NX USB not recognized after Standby-M

Hi,
if somebody uses a Laptop there is only the possibility to use an USB, Firewire or PCMCIA Soundcard.
I am using the Audigy2 NX USB with my portable PC (Windows XP SP2 installed).
When I close the lid of my Laptop and it goes into <EM>Standby-Mode</EM> and then reactivating Windows again an Error Message appears when Music is going to be played.
The Device seems to have a driver problem.
I need to reboot Windows XP everytime again when I want to play Sound. :angry:
(I've installed the newest Soundblasterdrivers and Firmware with Autoupdate!)
Questions:
: Is this a known problem?
2: Is there a solution?
3: Which external Creative-Soundcards do support Notebookfeatures like Standbymode?
4: Why aren't 64bit drivers released for Win XP64bit's

PAPPL wrote:
Hi,if somebody uses a Laptop there is only the possibility to use an USB, Firewire or PCMCIA Soundcard. I am using the Audigy2 NX USB with my portable PC (Windows XP SP2 installed).When I close the lid of my Laptop and it goes into <EM>Standby-Mode</EM> and then reactivating Windows again an Error Message appears when Music is going to be played. The Device seems to have a driver problem. I need to reboot Windows XP everytime again when I want to play Sound. :angryI've installed the newest Soundblasterdrivers and Firmware with Autoupdate!)?Questions:: Is this a known problem?2: Is there a solution?3: Which external Creative-Soundcards do support Notebookfeatures like Standbymode?4: Why aren't 64bit drivers released for Win XP64bit's
. Not a known problem at least I dun read it here.
2. The problem maybe with Windows itself cos I known that the OS have many problem with standby. If you go to microsoft website and do a search in their kbase, you will find many problem occur with USB device after standby.
3. As say, it may be a problem of OS and not the card.
4. There are 64bit driver being developed but just not release yet. This is what I found on their kbase.
http://us.creative.com/support/XPx64/
Here's one solution I found at microsoft kbase.
Do not configure your computer to turn off USB devices to save power while the computer is on standby. To do this, follow these steps:
. Click Start, click Control Panel, and then double-click System.
2. In System Properties, click the Hardware tab, and then click Device Manager.
3. In Device Manager, double-click Uni'versal Serial Bus Controllers.
4. Right-click USB Root Hub, and then click Properties.
5. In USB Root Hub Properties, click the Power Management tab, and then click to clear the Allow the computer to turn off this device to save power check box.
6. Repeat steps 4 and 5 for each instance of USB Root Hub that is listed in Device Manager.

Similar Messages

  • Wlan adapter not recognized after Standby (S205, Windows 8)

    Hi!
    I installed Windows 8 to my Lenovo IdeaPad S205 Netbook just a few days ago. Unfortunately, I have problems with Wlan. In the beginning, it didn`t work at all. Then I found a thread in this forum, where somebody recommended to set the network as the first booting device. Doing so made the Wlan work!
    But, after using the Standby-Mode of the netbook, Wlan doesn`t work again. The system says the adapter would be deactivated, though it certainly is activated. To make Wlan work again, I have to reboot the netbook.
    I also noticed that sometimes it is not possible to start the Bios while booting. Always when that`s the case, Wlan doesn`t work.
    I installed the newest drivers, also a driver I got from Atheros, the newest Windows 8 updates and I tried to de-/activate Lan adapter and to change the energy management setting - without sucess.
    It seems I´m not the only one with these problems, but I didn`t find any solution so far.
    Do you have any idea?
    Best regards
    Philipp
    Btw: I had no problems before with Windows 7.
    Solved!
    Go to Solution.

    hi Phil205de,
    If you're having issues accessing the BIOS after a shutdown, check this article.
    As for the WLAN card not being recognized or not being able to detect wifi networks, try to:
    1. Turn the computer OFF and remove the wifi antenna (see page 42 of the hardware maintenance manual)
    2. Turn the computer ON and when it gets to Windows, shut the PC off.
    3. Reconnect the wifi antenna and turn the PC ON.
    If you still get the same problem, try to Install Ubuntu via Wubi (can be uninstalled after) and try to check if you can now detect wifi networks. If everything's ok on Ubuntu, you need to reinstall Windows and load the wireless driver on Windows Setup as discussed in this article.
    Cheers
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Have reinstalled ITunes correctly-after USB not recognized for new Shuffle

    New Shuffle- 1st time it says USB not recognized- Apple sends me info to uninstall and re-install I-Tunes- I-Phone is still seen- try Shuffle- first message says USB port recognized- next one says something about hardware not being installed properly. Try again and am back to the original problem- USB not recognized. Of course Apple Support is now closed- any ideas?

    DId you uninstall iTunes and all it's components? Or just the iTunes program?  Apple Mobile Device would be the main cause more than likely. So it is important whether you uninstalled all the programs or just iTunes. If so what I would try next is putting the device into recovery mode and seeing if it detects it like that.

  • HT202274 Password change old password not recognized after 10.9.5 upgrade

    God bless you, peace.
    macbook pro 2012 user password not recognized after 10.9.4 too 10.9.5 upgrade plus tech work at apple.
    I want to change user password, it is allowing me to get into user account and admin account on computer but I recently changed it for the tech work to be done. I would like to put the password back now to old password or a new one but... The few days old new password pre update and pre tech work is not being accepted to allow me to change to another password.
    recent update, after 10.9.4 to 10.9.5 update and apple tech work done.
    1. Tech work replaced optical drive,
    2. 10.9.4 to 10.9.5 upgrade left computer endlessly booting up, then got into finder window tried to read backup drive and screen went to black curser and could not backup information as techs decided may need to be done before I left it with them.
    3. Also track pad was not (is not again) selecting text to drag unless real hard press and then only intermittently would select text or just drop the selection (not hold the selected text after a long scroll select, did work at first after tech work but back to not working). It is still not responding easily when pressed, but it is much better, as they did something with software they said. Today While typing this I am trying to select words misspelled and it does not select them unless I press not as hard it is becoming the same as before I see now, sometimes less pressure is needed but more than should be used.
    I noticed today after tech work The Spell check is not responding with a two finger tap on the red underlined misspelled words without multiple try's with two finger tap. The curser moves around after selecting words also, or when selecting words so hard the curser moves to another place not on the desired words or check box. The curser arrow tip should select the word but it does not recognize unless I put the tail of the arrow onto the word then it recognizes the misspelled word for spell check on two finger gesture.
    It looks like I need to take it back, I tried to call and check to confirm if the track pad intermittently and curser adjustment was serviced. In order to verify I had called three times to get that information to no avail. endless looped in the phone que, one would answer take info and then forward me to a endless loop dial ing phone that never was picked up, supposedly at the Bay street store tech section. Phone voice mail from apple support status on the repair, ...Juliano from Bay Street Apple repair store Emeryville, ca left a voice message... just generically said optical drive replacement is successfulI, I noticed right away three items were to be addressed but only the optical drive was mentioned, so I called three times to try and verify the other problems. One whole minute just to select this text and copy it to notes for a backup. It would not select at first, then after selected it would not copy it, then it would not paste to notes, it paste the last cut and paste I did 10 minutes ago.
    I do not have a easy excellent wifi connection for my wifi only phone and would prefer email or chat for repair help. apple Repair No: R142180337

    Try running the combo update. It fixes more files/data than the App Store upgrade.
    10.9.2

  • My ipad will no longer connect to the laptop. it comes up with usb not recognized. also when trying to connect to the power the first time i connect, nothing, but when i unplug from ipad and plug in a second time it charges

    my ipad will no longer connect to the laptop. it comes up with usb not recognized. also when trying to connect to the power the first time i connect, nothing, but when i unplug from ipad and plug in a second time it charges

    yeah tried all that. the only thing that i havent tried is to delete itunes completely and restart. its the same with the ipad. i havent done a master reset. i just think it has to be something rather simple as it acknowledges that i have plugged in the ipad as it makes the noise it just come up usb not recognized. it shows up as an unknown device that doestn have  any drivers
    its driving me round the bend at the minute

  • Can any one help me to fix my ipod touch it wont recognized by my laptop and itunes its said usb not recognized itried all the tips like reboot and restore plshelp me thanks

    can any one help me to fix my ipod touch it wont recognized by my laptop and itunes its said usb not recognized its freeze iin display usb and itunes logo pls help me pls itried all the uninstall unknown device and reboot the ipod and restore pls help me thanks

    Try the suggestions found here: http://www.apple.com/support/ipodtouch/assistant/itunes/

  • IPhone is not appearing in iTunes 12, USB not recognized by Windows 8.1

    S.O.S
    My iPhone 5s is not appearing in iTunes 12.
    Windows 8.1 says "USB Not Recognized".
    iPhone not appearing in iTunes 12 on iMac and MacBook Pro as well
    iPhone can charge with no problem.
    Try different cables and same problem nothing changed.
    I had tried;
    Reset and Restart iPhone.
    Cleaned the charging input.
    Tried in 3 different computers.
    I can't perform the method like uninstall/reinstall the USB driver on my Windows because in my Windows the USB showed unrecognized instead of "Apple USB/iPhone USB" on Device Manager.
    P L E A S E    A D V I S E

    Hi Since ios 7 almost everything can be dropped over your WiFi When you charge your phone if Automatically backs up to iCloud If you have problems backup to iCloud over your WiFi Then Restore iPhone back to Factory Settings Use same Apple ID Then you will get all your apps & data back. We have 2 iPhones & 3ipads & have not used a pc for over a year with them. Cheers Brian

  • External USB not recognized on my iMac (intel) in Disk Utility, Finder as well as in Terminal diskutil list but is listed in System Profile, which includes the location ID of 0xfa400000 / 5.  Can the location ID be used to restore USB identity ?

    My 1TB Seagate external USB not recognized by my iMac (intel) in Disk Utility, nor in Finder as well as in Terminal "diskutil list" but it is listed within the System Profile, which includes the location ID of 0xfa400000 / 5.  Can the location ID be used to restore the identity of my external USB ?

    Hello JNotorious,
    Thank you for using Apple Support Communities.
    For more information, take a look at:
    USB and FireWire Quick Assist
    http://support.apple.com/kb/ht1151
    Have a nice day,
    Mario

  • Logitech trackball not recognized after 10.5.8 update- LCC 3.1 needed

    Logitech Trackman wireless trackball was not recognized after 10.5.8 upgrade. At re-boot, the "searching for bluetooth mouse" screen appeared, pushing the re-set button on the wireless base and trackball did not solve the problem.
    Had to plug in my Apple mouse (worked immediately), go to the Logitech website and download the latest Logitech Control Center software for Snow Leopard, dated 9/22/09 (version 3.1)
    After install and re-start, Logitech hardware worked perfectly, as before.
    Not sure if it would avoid this issue, but I recommend installing LCC 3.1 before you install the 10.5.8 update. That or be sure you have an Apple mouse on hand.

    aaron08544 wrote:
    Turns out the 10.5.8 update is missing a very important file which is
    /usr/X11/lib/X11/fonts/misc/fonts.alias
    After I copied one from my Centos 5.2 box, things are finally back to normal.
    -Aaron
    I have that file on my system and x11 was updated using 10.5.8 combo update. it works just fine.

  • USB not recognized from my ipod touch 2nd gen on any of computers.

    USB not recognized from my ipod touch 2nd gen on any of computers.

    Just what are you doing where?
    Are you trying to sign into Settings>iTunes and App Store?

  • Camera RAW, file not recognized after import and migration, Aperture 2.1

    Hi,
    I have recently purchased a 1DMKIII and am constantly getting "file not recognized" after I import and even after migrating RAW files. My 1DS MK1 RAW files have no issues. The RAW files render just fine using CS4 bridge. Any ideas here on a fix? Other than ditching Aperture (not desireable)
    Thanks,
    Greg

    Hummmm..I have just 'manned-up' from a 2gb macbook running tiger+CS4 to a iMac 24" 8gb running leopard BUT!
    I shoot RAW and the iMac will not recognize the NEF RAW files! this is soo frustrating - tried to update Camera Raw but to no avail.
    please help! I've got 987 raw wedding photos to process!!
    I dont know what to do!

  • Airport does not reconnect after standby...

    Is anyone having issues w/ wireless not reconnecting after standby? In order to resolve the problem, I have to turn airport off then back on. Most of the time I can get back on using on/off method, but seldomly I have to reboot. This is my config:
    SSID is not broadcasted, using capital letters and numbers for SSID Name.
    WPA TKIP set for router encryption. WPA Personal selected on Airport.
    I don't seem to have this problem on my Macbook running Leopard, so I'm pretty sure it's hardware/driver related to my Macbook Pro. I have to keep tabs on this, but I almost think this problem does not appear when a network SSID is broadcasted and/or unecrypted. It could be my imagination but not sure.
    Any ideas or same issues out there?

    I always have the same problem; I assume it has something to do with the fact that I regularly switch my cable modem to "standby" when done surfing the internet. Seemingly Airport loses the signal (or whatever) because the modem isn't feeding a signal being in standby mode? When I turn the modem back on, I have to turn Airport back on as well. So far, I've just felt it to be a small inconvenience.

  • My Ipod Touch when I try to connect to ANY computer with ANY USB cable I get "USB Not Recognized" Other Ipod devices work with ALL computers and ALL USB cables PLEASE HELP!!!

    I am using an IPod Touch 3. I get the error message USB Not Recognized. Now I have tried three different USB Cables and three different computers...... Same error message. My daughters IPod Touch 4 works perfectly with all of those USB Cables and computers, so this is not a USB problem or a computer problem. It must be something with my IPod Touch 3. Every article I go to wants me to look at stuff on the computer but how could that make sense if other IPod Devices work fine? Please. Any information would be greatly appreciated.

    You need to provide more information about your network. What frequency does it use (2.4ghz or 5.0ghz), which wireless protocol (a, b, g, b/g compatibility, n), and what security are you using (WEP, WPA2, etc.)?
    Please also provide more information about your iPod Touch. Which model is it, and which version of the iOS are you running on it?

  • I have got an iphone 4 and i have plugged it into my windows 8 laptop and a message pops up on the laptop saying usb not recognized, what do i have to do to make my laptop recognize my phone?

    i have got an iphone 4 and i have plugged it into my windows 8 laptop using the usb cable, and a message pops up on the laptop saying usb not recognized, the iphone doesnt say its charging or anything, how do i get my laptop to recognize my phone?

    Start here:
    http://support.apple.com/kb/TS1538

  • HT1923 USB not recognized! HELP URGENT

    Heyy Everyone!
    I really need help!! Okay so this is the case I connected my iPod touch to the laptop Sony Vaio, and this is the first time it ever happened it says USB not recognized, doesnt open itunes or anything, yes I searched and searched did everything nothing worked please if you know how to fix this.. I tried it on couple more laptops/computers still the same any idea what could caused the problem, i used it like couple of times and left it for a month-ish oh and its 22,321,272 minutes locked and I really want to restore but really cant desprately need help

    ok, Im sorry to update this thread again but I fixed one issue and made another...
    So on another thread I read that sometimes the issue is fixed from shutting down the computer and actually unplugging it from the wall. I did that and at restart it worked! It prompted me to restore my settings and it went through and works fine now. HOWEVER... my apps are gone! I did a backup on itunes today that it loaded, but the apps are not there.... what happened?? Please tell me they are not lost.....

Maybe you are looking for