Audio will only play when started from the beginning of the sequence

I am running CS5 Premiere Pro on a Mac, the audio plays fine in one of my sequences but only from the beginning of the sequence and on. If you stop it, or move the play head to any spot on the sequence, then the audio becomes very off and sometimes doesn't even play any sound. Has anyone else had this issue before?

I tried that, but it doesn't appear that I have a com.apple.audio.AggregateDevices.plist file in my preferences folder. I don't even have a com.apple.audio file of any type.

Similar Messages

Audio only plays when started from the beginning?

Hi! I'm fairly new to flash, i'd consider myself a beginner, but recently i've been tasked with making an animation for someone! There is a song playing in the animation, it's a wav and it's on its own layer. There are also drawings i imported in too.
My problem is, i want to be able to sync up the little drawings to the words of the song, but the audio only plays when i start at 0 on the timeline. If i were to start at let's say frame 24, it won't play. Does anyone know how to fix this? This commission needs to be finished by Wednesday and it's a S L O W process, having to start it over only to hear like one or two words later on

change the sync property (in the properties panel after clicking the keyframe where your sound starts) from event to stream. retest.

My iPod shuffle says it has 9 songs on it , but it will only play two of them. What is the problem and what do I do to hear the other songs

My iPod shuffle says that there are 9 songs on it, but it will only play two of them. What is the problem and how can this be fixed?

Does the iPod connect to other networks?
Does the iPod see the network?
Any error messages?
Do other devices now connect?
Did the iPod connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

I downloaded an album from Itunes but one of the songs will only play first 4 minutes. It is the last song on the album. All other songs will play.

I downloaded an album from i Tunes but one of the songs will only play first 4 minutes of 26 minutes and then stop. It is the last song on the album. All other songs will play. The Album is U.F.O. 2 One Hour of Space Rock.

Jim, wanted to let you know it worked. I deleted the entire album since it was an album only (26 minutes long) song, then I went to the home icon of iTunes store, clicked on purchased and saw previous purchases and bam, I downloaded the album again and it now works!!! Thanks..
Angelo

Creative Cloud will only "run" when started in "Run as Administrator"

For some reason, sometime in the past month Creative Cloud will not give me access when started from any of the normal methods; the Task bar Shortcut, the Start Menu shortcut, or even directly from double clicking on "Creative Cloud.exe." It starts in the background but does not appear on the monitor. This is confirmed with Task Manager. I have found that if I use Task Manager to "End Task," I can start the program (from any of the above methods) by choosing "Run as Administrator" and it appears on the monitor and I have complete access.
Today, I updated to the newest version and the situation remains the same (except, that before I did not have to "end Task" in Task Manager prior to "Run as Administrator.)
What is causing this and how do I fix it?

I tried every solution I found online suggesting deletion of apps, fresh installs, deletion of folders, permission changes, etc. I finally had an hour long chat session with an Adobe tech who had me do much of the same thing again, only to have the issue remain.
Here was the end solution which worked for me:
1. Create a new Admin account
2. Log out of your computer, and then back in under the new admin account
3. use the Creative Cloud uninstaller app to uninstall CC desktop. (Doing this prompted an alert message telling me I couldn't do this because some CC apps required it. So, I deleted the 2 CC apps I had installed, Lightroom and Photoshop)
4. After the uninstall completes, install a new copy of CC desktop. (Once I did this, it opened and ran correctly.)
5. Log out and log back in under your usual account.
6. If CC desktop doesn't start on its own, double click the application itself to start up.
After completing step #6, CC desktop started up on its own. I re-downloaded Photoshop and Lightroom through CC and all is working normally so far.

CS5.5 audio will not play upon start up

I am using a Mac. This doesn;t happen every time, but more than 60% of the time it does. When I start up CS5.5, I can see my audio and past sessions when I open them, but nothing will play in Multitrack or single mode. The only fix I have been able to come up with is, if I create a new recording and hit "Record"... CS5.5 will start recording. After I hit stop, then and only then will all my files start to play. I've tried to play from the space bar, as well as clicking on the play buttons. Can someone help me figure this out?
FYI _ I am aware of the Hardware settings and have checked all of those. I can't see any issues with them as it relates to this problem.
Thanks

Hi,
Try downloading and installing a basic codec pack such as the one on the link below - if you do try this one, just accept the default setting during the installation.
http://www.codecguide.com/download_k-lite_codec_pack_basic.htm
When the installation has completed, restart the notebook.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

ITunes will only play first track from an album!

Hi all
Have recently upgraded to iTunes 9.2 and it's broken!! For some unknown reason when double clicking on an album in my library, unlike in old iTunes the whole album would play, it now only plays the first track then stops. It will play all the tracks, but I have to keep selecting the next track to play. I want the old, fully working and polished iTunes I'm used to, not this half baked ill thought & rushed out alleged "upgrade"
Any help or advise would be gratefully appreciated.

Have the tracks become unchecked? iTunes will skip unchecked tracks, so if they're all unchecked, iTunes will play one and then stop. If this is indeed the case, re-checkmark the tracks - control-click on any checkbox will select or unselect them all - and you should then have continuous playback.
Hope this helps.

Real player plugin won't work anymore? How do i fix it? Videos will only play when the plugin is turned off and i am unable to download videos?

the download video box does not come up anymore and the videos do not play?

Probably due to the RealPlayer Browser Record Plugin being blocked by Mozilla due to the huge number of crashes it has been causing over the last week and a half, or so.
https://addons.mozilla.org/en-US/firefox/blocked/i106 <br />
https://addons.mozilla.org/en-US/firefox/blocked/i107

I have an apple tv 3 but when i use Home Sharing from my Windows Laptop the Apple TV shows all my music on the TV but it will only play 1 or 2 songs and then stops!!! Annoying, so I have to re-start iTunes on my Laptop and it will play 1 or 2 more songs

I have an apple tv 3 but when i use Home Sharing from my Windows Laptop the Apple TV shows all my music on the TV but it will only play 1 or 2 songs and then stops!!! Annoying, so I have to re-start iTunes on my Laptop and it will play 1 or 2 more songs then stops again!!! still annoying.
Can anyone assist me with this issue?
Thanks

To downgrade, you'll need to download the previous software version here: ATV3 http://appldnld.apple.com/AppleTV/041-4361.20120605.grjot/AppleTV3,1_5.0.2_9B830 _Restore.ipsw
ATV2: http://appldnld.apple.com/AppleTV/041-4362.20120605.t8i4U/AppleTV2,1_5.0.2_9B830 _Restore.ipsw
Next, plug the Apple TV into your computer with a micro-usb cable (most phones today use these) and start up Itunes. It should detect the Apple TV in recovery.
After that, hold down Option on Apple or Alt on Windows and click Restore. This should open a window that allows you to select the software update you want to apply. Select the one you downloaded earlier.
It will then go through the restore process, which takes only a few minutes, and then you will be able to plug the Apple TV back in to your display and set it up again.
I recently ran into a similar issue with a bunch of these things and after restoring them all to the previous software version they are working again.

I am using FC Express HD, and for some reason, when I export a Quicktime movie, the final movie will only play audio, and the video is black. I only get the actual video if I export as self contained, or if I exportusing quicktime conversion. Why?

I am using FC Express HD, and for some reason, when I export a Quicktime movie, the final movie will only play audio, and the video is black. I only get the actual video if I export as self contained, or if I exportusing quicktime conversion. Why?

I am using FC Express HD, and for some reason, when I export a Quicktime movie, the final movie will only play audio, and the video is black. I only get the actual video if I export as self contained, or if I exportusing quicktime conversion. Why?

HT4436 Since installing Ios7 280 music tunes out of a total of 360 will now only play when I'm within range of WiFi. How can I get them back on my Iphone 4s and scrap this stupid icloud that I did not want or ask for in the first place.

Since installing Ios7 280 music tunes out of a total of 360 will now only play when I'm within range of WiFi. The remainder now appear with the stupid Icloud logo beside them. How can I get them back on my Iphone 4s and scrap this stupid icloud that I did not want or ask for in the first place. Why can't rotten apple ask if you want the dam icloud rather than just stealing everything without permission and then you can only have access to it through wifi.

Wow, just posting and it seems that there is a solution that is working for me...
What I've did is I turned off iTunes Match on my iPhone, then turned in on again. Now in my iTunes library on my mac I can get the duplicates to be matched or uploaded to iCloud with a right-click, add to iCloud. iTunes Match starts to check the songs and everything is done correctly. Pretty nice!

IPhone 5. Prior to the iPhone 5, I could listen to podcasts one after the other without doing anything. Now it will only play one podcast at a time, then I have to click on the next one. Not a great feature when driving. TIA, Sarah

iPhone 5. Prior to the iPhone 5, I could listen to podcasts one after the other without doing anything. Now it will only play one podcast at a time, then I have to click on the next one. Not a great feature when driving. TIA, Sarah

How do I get it to just play through all the podcasts that I've downloaded just like my 1st gen?
Group and order your podcasts to a playlist. Then play them from the playlist.

I downloaded several cds to my external hard drive in .mp3 format. Later, I copied them to iTunes. The songs only play when the external hard drive is plugged in. I tried to load the songs from iTunes to my iPhone and the songs don't play.

I downloaded several cds to my external hard drive in .mp3 format. Later, I copied them to iTunes. The songs only play when the external hard drive is plugged in. I tried to load the songs from iTunes to my iPhone and the songs don't play. I thought iTunes allowed me to transfer music to my iPhone and play it. What am I doing wrong?

Hi skoorb1,
When adding music to iTunes, you can set it to either make a local copy of the file, or simply point to the original location of the file (for example, on an external hard drive). If it is set to do the latter, it will not be able to play or transfer those files when the external hard drive is not plugged in. You may find the following article helpful:
iTunes: About the Add to Library, Import, and Convert functions
http://support.apple.com/kb/ht1347
Regards,
- Brenden

HT3204 i bought and downloaded a song from itunes store and it said it was complete but will only play the first 14 seconds of the song then it cuts off. what should i do to retrieve the rest of the song?

I bought a song from the itunes store and downloaded it and it said download was complete but when i go to play the song it will only play the first 14seconds of it then it cuts off. what should I do to retrieve the rest of the song?

If you live in a Region that allows re-downloading Music...
Delete the Song(s) and re-download...
See Here > Download Past Purchases
http://support.apple.com/kb/HT2519
If not... Contact iTunes Customer Service
Apple Support iTunes Store Contact Us

I've just downloaded a sd movie from iTunes with my ipad but the movie will only play for 13s then a msg comes up saying "could not load video! I've paid for it and downloaded the whole thing ! Can anybody help me pls?

I've just downloaded a sd movie from iTunes with my ipad but the movie will only play for 13s then a msg comes up saying "could not load video! I've paid for it and downloaded the whole thing ! Can anybody help me pls?

Hello Lcw2610,
I would recommend deleting the affected movie from your iPad, and redownloading the movie.
How to delete content you've downloaded from the iTunes Store, App Store, iBooks Store, or Mac App Store
http://support.apple.com/kb/HT5772
Download past purchases
http://support.apple.com/kb/HT2519
If the issue persists, please do report the issue to the folks in our iTunes Store.
To report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase, follow these steps:
Find the email receipt for your purchase.
Click Report a Problem under the app that is having the issue.
When prompted, enter the Apple ID and password you used to purchase the item, then click Report a Problem.
Click Report a Problem next to the item you are having an issue with.
From the Choose Problem dropdown menu, choose the appropriate issue.
Follow the onscreen instructions and—if prompted—type a description of the problem into the text field.
Click Submit to have your issue reviewed.
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
http://support.apple.com/kb/HT1933
Cheers,
Allen

Audio will only play when started from the beginning of the sequence

Similar Messages

Maybe you are looking for