Audiobook problem ever going to be solved?

Is the problem with the audiobook folder ever going to be solved? The one where you can't get the audiobook file into the audiobook folder, no matter what you do? (Including converting, deleting, copying into different folder, and moving back to iTunes several times.)
This is getting to be really annoying.
Is there any way to re-arrange the files manually? Is there ever going to be an update for iTunes that manages it?

Browser Dog, Amy,
The default font remains Myriad Pro until you change it, either in the RGB/CMYK Startup files or in the preferences, options depending on versions.
Concerning missing font names, I believe this may solve it:
Open System Preferences and go to Accessibility. Next, select Display from the source list along the left, then check the box labelled Reduce transparency.
It was first presented in this post #15 by TheUlser:

Similar Messages

What is the problem with fonts changing to myriad pro? Is this problem ever going to be resolved? Its driving me mad!

What is the problem with fonts changing to myriad pro? Is this problem ever going to be resolved? Its driving me mad!

Browser Dog, Amy,
The default font remains Myriad Pro until you change it, either in the RGB/CMYK Startup files or in the preferences, options depending on versions.
Concerning missing font names, I believe this may solve it:
Open System Preferences and go to Accessibility. Next, select Display from the source list along the left, then check the box labelled Reduce transparency.
It was first presented in this post #15 by TheUlser:

In iTunes I'm having problems changing the "Media Kind" with a number of playlists in the OPTIONS menu from "music" to "audiobook". After going through the steps, the next time I check the items have reverted back to "music". What step am I missing?

In iTunes I'm having problems changing the "Media Kind" in the OPTIONS menu from "Music" to "Audiobook". After going through the steps, the next time I check, the items have reverted back to "Music". What must I do to save it as an "Audiobook"?

After more digging in the Support section here and some Google work, I turned off iTunes Match and lo and behold! I can change the media kind to Audiobook! So, it looks like iTunes Match locked the files up somehow and for some reason.
I went into iTunes Store > iTunes Match > "No, Thanks" to disable it on the local PC.

Are you ever going to fix the "You've been signed out" problem?

I've gone through forums and your trouble shooting page and I've found a lot of angry customers over thus Creative Cloud "You've been signed out" problem. Fortunately for me, I'm not a customer. I installed it so I could download a trial or premiere with the intention to buy, but now I don't need the trial because this is issue has made up my mind. But I am still curious if you're ever going to fix it?

This is a user forum please open a problem report over at http://feedback.photoshop.com/photoshop_family/

Are Adobe EVER going to make Edge Animate scale-to-fit (like Flash)?

I've been following the progress of Edge Animate (formerly Edge) ever since Steve Jobs decided he wasn't having Flash on the iPad.
With each new version I've been desperately looking for the feature that I consider the most important of all: Scale-to-fit
There are a couple of discussions already on this forum where people have requested this feature - but both have been sidetracked by replies from people who haven't understood what 'scale-to-fit' is. So let me explain Scale-to-fit:
I'm talking about the feature in Flash - where if the HTML dimensions are set to 'Percent' - then the resultant movie will scale-to-fit any browser window. Here is an example of what I mean:
http://www.skippingschool.co.uk
- try changing the browser size and you'll see the whole frame (graphics and images) scales without changing its proportions.
When the latest version of Edge Animate came out with its built-in easy-to-follow 'Resize' Lesson, I thought Adobe had finally found an answer. But good though this feature is, it doesn't solve the problem. It's only possible to properly scale-to-fit images - not graphics.
It's now more important than ever that Adobe finds a solution to this problem. The world is going 'Responsive' - its not just a fad. And 'Responsive' is not just about three columns being squeezed into one. All Responsive sites require images, graphics AND animations to scale-to-fit. So Adobe's tutorial showing how Edge Animate can be added to WordPress sites is of limited use because it won't work for Responsive web sites.
So please Adobe, will someone tell me if scale-to-fit is EVER going to happen? I don't mind if it's 3 months, 6 months, 9 months down the line - but I need to know if it's worth me sticking with Edge Animate - or whether I should be looking toward HTML5 Canvas or something else for a solution?
Alternatively, is there some fundamental reason why it can NEVER happen?
Please tell me? Just put me out of my misery!

Hi Sarah,
I hope you don't mind but I played around with your code a bit and managed to get the kind of scale-to-fit behavior that I believe the OP was asking about. I think the trick is to make sure that you also check whether the scaled height of the stage exceeds the height of the browser window and change the scaling so that it is responsive to changes in both the width and height of the window, whichever is the limiting factor. The code I changed in CompositionReady appears in bold below. I hope this helps.
sym.$("#Stage").css({ // Set the transform origin so we always scale to the top left corner of the stage
"transform-origin":"0 0",
"-ms-transform-origin":"0 0",
"-webkit-transform-origin":"0 0",
"-moz-transform-origin":"0 0",
"-o-transform-origin":"0 0"
function scaleStage() {
    var stage = sym.$('Stage'); // Set a reusable variable to reference the stage
    var parent = sym.$('Stage').parent(); // Set a reusable variable to reference the parent container of the stage
    var parentWidth = stage.parent().width(); // Get the parent of the stage width
    var parentHeight = $(window).height(); // Get the browser window height
    var stageWidth = stage.width(); // Get the stage width
    var stageHeight = stage.height(); // Get the stage height
    var desiredWidth = Math.round(parentWidth * 1); // Set the new width of the stage as it scales
    var desiredHeight = Math.round(parentHeight * 1); // Set the new height of the stage as it scales
    var rescaleWidth = (desiredWidth / stageWidth); // Set a variable to calculate the new width of the stage as it scales
    var rescaleHeight = (desiredHeight / stageHeight); // Set a variable to calculate the new height of the stage as it scales
    var rescale = rescaleWidth;
    if (stageHeight * rescale > desiredHeight) // Do not scale larger than the height of the browser window
                    rescale = rescaleHeight;
// Rescale the stage!
           stage.css('transform', 'scale(' + rescale + ')');
     stage.css( '-o-transform', 'scale(' + rescale + ')');
           stage.css('-ms-transform', 'scale(' + rescale + ')');
     stage.css('-webkit-transform', 'scale(' + rescale + ')');
           stage.css('-moz-transform', 'scale(' + rescale + ')');
     stage.css('-o-transform', 'scale(' + rescale + ')');
           parent.height(stageHeight * rescale); // Reset the height of the parent container so the objects below it will reflow as the height adjusts
// Make it happen when the browser resizes
$(window).on('resize', function(){
           scaleStage();
// Make it happen when the page first loads
$(document).ready(function(){
    scaleStage();

Is there ever going to be a charging pod for the curve 8530 or is there anything like that?

Is there ever going to be a charging pod for the curve 8530 or is there anything like that?
Please give me Kudos if you feel like I helped you
Thank you
cuse165

http://www.buy.com/retail/product.asp?sku=212003066&listingid=50848783
knot the best solution but it is a cradle that uses the side USB to charge and sync.
or search
fosmon cradle 8520
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

Will Apple Fix The Safari 5.0 Crash Problem Ever!!!!!!!

I have had this Sarfari 5.0 crash problem ever since the update has come out. I see hundreds of forum members having the same problem. the forum moderators are doing their best to help them to solve the crashing problems but to no end the crashing problems are still occuring. I have about 10-15 crashes daily. I send all the reports back to Apple after every crash. Looks like Apple would get the message! What it is going to take before Apple decides to fix this problem for good? Hey Apple, how about an update to fix this problem!!!!!!!

HI David,
but to no end the crashing problems are still occuring.
Following the advice of volunteers may very help stop the crashes.
Did you try the advice given by andyBall_uk here?
http://discussions.apple.com/message.jspa?messageID=11852159#11852159
If not, then uninstall your current copy of Flash, then reinstall new then repair permissions.
Uninstall Flash
Install the most recent version of Flash here.
Now repair permissions.
Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac. If you see a long list of "messages" in the permissions window, it's ok. That can be ignored. As long as you see, "Permissions Repair Complete" when it's finished... you're done. Quit Disk Utility and restart your Mac.
What it is going to take before Apple decides to fix this problem for good? Hey Apple, how about an update to fix this problem!!!!!!!
It's not Apple's responsibility to update third party software.
We are not forum moderators. We are volunteers who give our time and experience in order to help other Mac users.
Carolyn

Is Cisco ever going to address the fact the E1200 does not support Wireless-N speeds at all!

When is Cisco ever going to address despite the touted speeds on their product packaging and what they claim wherever they sell the product that the E1200 with latest or earlier firmwares do not support Wireless-N speeds and usually gets under 1Mbps which is ridiculous?
Why is Cisco still selling this inferior product if they know it doesn't work and they have not patched it?
http://homecommunity.cisco.com/t5/Wireless-Routers/E1200-very-slow-wireless/td-p/492752/page/5
http://homecommunity.cisco.com/t5/Facebook-Support/E1200-Slow-connection/td-p/466164

Extremely high volumes of connections can affect the speed of your own Internet connection. Did you already verify the connection straight to the modem? If that is working fine, then I firmly believed router is the issue here. Well there is lot of factors affecting slow speed with the router, that maybe cause by a corrupted firmware. BTW, what’s the version number of this router? If it’s already on the latest firmware, what I can suggest is to reset and reconfigure this device. You might as well disable WMM (it’s recommended for version 2 having this issue). My friend and I fix her problem with version when we disable WMM.

IS THE SKYPE FOR LOGITECH REVUE EVER GOING TO HAPP...

IS THE SKYPE FOR LOGITECH REVUE EVER GOING TO HAPPEN?
DOES ANYONE HAVE ANY NEWS ON IT?

Hi. I'm on a 20GB 4G sharer plan using a Galaxy Note 3. Postcode is HU4 6DP. I can travel away from home to Manchester & in areas get speeds of 50-100 Mbps which is more like it! However at home, it crawls along at anywhere from 0.2Mbps on a bad day to an average of 0.5 or less which is worse than the old Orange 3G service used to be. It's very odd as 1st thing on a Sunday morning for example, I've had 30Mbps plus but it doesn't last long & when people wake up, it goes back to snail pace. Speeds in city centre not great either. I've raised a Level 2 Technical case with EE CS but nobody got back with an update. The staff in stores tell me it's to do with KC & their cabling to the masts being out-of-date. Social Media Team today commented Hull has always presented a bit of a problem but should be back on with double 4G speeds by Christmas...sadly too late for me as contract is up in 2 months. Other than jumping ship which I am loathed to do, I seem to have little choice which is very frustrating after 20 years. Thanks

Is mail ever going to be fixed?

Ever since I upgraded to Mavericks, my macmail has been difficult - slow to load new emails, jumbled up sender listings, just generally a problem. Is there ever going to be an update to get it back to normal?

My Mail works fine. Thus I suspect the problems you describe are related to software problems with your own OSX installation. And a software update is not the issue.
To troubleshoot your software problem, you could try a few things, roughly in this order:
If you have any third-party mail related software, uninstall it.
Try a safe boot (restart, hold down shift until you see the Apple logo). This does some diagnostic testing and then starts up without third-party added on software. If this eliminates the problems with Mail, then you know the problem is with some third-party software. A safe boot doesn't fix anything, but it tells you where the problem is. Mac OS X: What is Safe Boot, Safe Mode? If the safe boot does indeed eliminate the problems with Mail, then you can try to eliminate the third party software that is causing the problem.
try a test user account: create a new user account. Recreate your mail accounts in that new account and see how Mail runs. If the problems are gone, then you know the problems are in your old user account.
Boot into your recovery partition (restart, hold down ⌘R until you see the Apple logo), and use Disk Utility to repair your hard drive. Repair permissions too while you're there. OS X: About OS X Recovery
sometimes there is a problem with OSX that Disk Utility can't fix, and the solution is to reinstall OSX over your current installation. That usually works for OSX problems.

My computer, running on Lion, randomly flashes with crazy lights and colors. Doesn't happen often, but when it does it's totally random. What causes this problem and how can I solve it?

My MacBook Pro, running on Lion, randomly flashes with crazy lights and colors. Doesn't happen often, but when it does it's totally random. It looks like the Northern LIghts!!!
What causes this problem and how can I solve it?

Really? Oh I get it. You're the kind of person who goes on tech message boards to make jokes - or friends.
Well, I'm trying to solve this problem - which is a rather annoying way to spend a Saturday.
SO either help or don't reply.

Facing problem while going to catch return result from web-services.

Hi everybody,
I am new to BPEL. I am facing problem while going to catch the attributes of resultsets returning from web-services(QAS). As far as my knowledge, two types of results it should return - XML entities and another is attributes which is coming as the part of XML entitites. I am able to catch the XML entities, but can't catch the attributes under it. Even, I am not able to see whether web-services returning something within that field.
When, I tried to catch the attribute and store to a temporary varilable using the following code:
*<assign name="AssignQASDoGetAddress1">*
*<copy>*
*<from variable="InvokeQAS_DoSearch_OutputVariable"*
part="body"
query="/ns6:QASearchResult/ns6:QAPicklist/ns6:PicklistEntry/@PostcodeRecoded"/>
*<to variable="temp"/>*
*</copy>*
*</assign>*
but, I am facing the following selectionFailure errors after running it:
*"{http://schemasxmlsoap.org/ws/2003/03/business-process/}selectionFailure" has been thrown.*
-<selectionFailure xmlns="http://schemasxmlsoap.org/ws/2003/03/business-process/">
-<part name="summary">
*<summary>*
empty variable/expression result.
xpath variable/expression expression "bpws:getVariableData('InvokeQAS_DoSearch_OutputVariable', 'body', '/ns6:QASearchResult/ns6:QAPicklist/ns6:PicklistEntry/@PostcodeRecoded')" is empty at line 269, when attempting reading/copying it.
Please make sure the variable/expression result "bpws:getVariableData('InvokeQAS_DoSearch_OutputVariable', 'body', '/ns6:QASearchResult/ns6:QAPicklist/ns6:PicklistEntry/@PostcodeRecoded')"is not empty.
*</summary>*
*</part>*
*</selectionFailure>*
Getting this error it seems to me that web-service is returning nothing, but, it returns something as it has been catched using a method called isPostcodeRecoded() Java Code in Oracle ADF. This method has been used as it should return boolean whereas for catching the xml entities using java code we used the method like getPostcode(), getMoniker().
For your information, we are using Jdeveloper as the development tool for building the BPEL process.
Am I doing any syntax error. Please consider it as urgent and provide me asolution.
Thanks in advance.
Chandrachur.

Thanks Dave and Marc, for your suggestions. Actually what I found is QAS web-service is returning nothing as attributes when the attributes are set to the default value. For example, following is the part of the wsdl of the result which QAS webservice returns.
<xs:element name="QASearchResult">
- <xs:complexType>
- <xs:sequence>
<xs:element name="QAPicklist" type="qas:QAPicklistType" minOccurs="0" />
<xs:element name="QAAddress" type="qas:QAAddressType" minOccurs="0" />
</xs:sequence>
<xs:attribute name="VerifyLevel" type="qas:VerifyLevelType" default="None" />
</xs:complexType>
</xs:element>
<xs:complexType name="QAPicklistType">
- <xs:sequence>
<xs:element name="FullPicklistMoniker" type="xs:string" />
<xs:element name="PicklistEntry" type="qas:PicklistEntryType" minOccurs="0" maxOccurs="unbounded" />
<xs:element name="Prompt" type="xs:string" />
<xs:element name="Total" type="xs:nonNegativeInteger" />
</xs:sequence>
<xs:attribute name="AutoFormatSafe" type="xs:boolean" default="false" />
<xs:attribute name="AutoFormatPastClose" type="xs:boolean" default="false" />
<xs:attribute name="AutoStepinSafe" type="xs:boolean" default="false" />
<xs:attribute name="AutoStepinPastClose" type="xs:boolean" default="false" />
<xs:attribute name="LargePotential" type="xs:boolean" default="false" />
<xs:attribute name="MaxMatches" type="xs:boolean" default="false" />
<xs:attribute name="MoreOtherMatches" type="xs:boolean" default="false" />
<xs:attribute name="OverThreshold" type="xs:boolean" default="false" />
<xs:attribute name="Timeout" type="xs:boolean" default="false" />
</xs:complexType>
<xs:complexType name="PicklistEntryType">
- <xs:sequence>
<xs:element name="Moniker" type="xs:string" />
<xs:element name="PartialAddress" type="xs:string" />
<xs:element name="Picklist" type="xs:string" />
<xs:element name="Postcode" type="xs:string" />
<xs:element name="Score" type="xs:nonNegativeInteger" />
</xs:sequence>
<xs:attribute name="FullAddress" type="xs:boolean" default="false" />
<xs:attribute name="Multiples" type="xs:boolean" default="false" />
<xs:attribute name="CanStep" type="xs:boolean" default="false" />
<xs:attribute name="AliasMatch" type="xs:boolean" default="false" />
<xs:attribute name="PostcodeRecoded" type="xs:boolean" default="false" />
<xs:attribute name="CrossBorderMatch" type="xs:boolean" default="false" />
<xs:attribute name="DummyPOBox" type="xs:boolean" default="false" />
<xs:attribute name="Name" type="xs:boolean" default="false" />
<xs:attribute name="Information" type="xs:boolean" default="false" />
<xs:attribute name="WarnInformation" type="xs:boolean" default="false" />
<xs:attribute name="IncompleteAddr" type="xs:boolean" default="false" />
<xs:attribute name="UnresolvableRange" type="xs:boolean" default="false" />
<xs:attribute name="PhantomPrimaryPoint" type="xs:boolean" default="false" />
</xs:complexType>
here the attributes like FullAddress, PostcodeRecodedare , etc. are not being return by the web-service when it is getting the default value false. But, if it gets true then , it is being displayed at the BPEL console.
Do you have any idea how can I catch the attributes and its value even when it gets the default value which is already set. Previously, it was returning(it was not being displayed at the console).
Thanks once again for your valuable suggestions...!!!
Chandrachur.

HT4628 I am able to download updates and send and receive email so I know I have connection to my wireless router. However, when I click on Safari, I get the message "Safari quit unexpectedly." What is my problem and how do I solve?

When I click on Safari, I get the message "Safari quit unexpectedly." I know I have access to my wireless net work because I just found and downloaded updates and can send and receive mail. What is my problem and hoe is it solved?

As Outlook is not an Apple product, you will find more helpers familiar with Outlook here:
Office for Mac forums

Is quicktime ever going to be fixed... it's been rubbish for years.

I have a large number of audiobooks, I join the mp3 files into one big one then convert them to m4b in Itunes or MP3 to Ipod audiobook converter. These always played perfectly on my iPod classic, many of them won't play now I have a touch, they won't play on iPhone or iPad either. I'm guessing that IOS devices use quicktime as a media player as they wont play on quicktime either. (Error -2014: the movie contains an incorrect duration). If I try to play the original MP3 files they report incorrect times and do not play correctly either.
All of my MP3 files pass an MP3 check. All of MP3 and m4b files play perfectly on any Nano or Classic player, or any MP3 player I have tried.(lots) and will all play perfectly with iTunes, Media player, Zune, VLC etc. etc. it is ONLY ios devices and quicktime that have a problem.
I have seen this problem reported before, it has been around many years and Apple don't appear to have the ability or inclination to fix it...
I guess it is down to the fact that they hate windows users, it is similar to the USB problem that occurred at ios 5 release, you have to plug it into a motherboard (not hubs even though every other USB device works ONLY the touch doesn't) USB port or the device is no longer recognised.
Apple are well aware of the problem, they just don't care (100 odd billion in the bank they can afford the arrogance).
Would love to know if anyone has found a fix for the audiobook problem...

My Mail works fine. Thus I suspect the problems you describe are related to software problems with your own OSX installation. And a software update is not the issue.
To troubleshoot your software problem, you could try a few things, roughly in this order:
If you have any third-party mail related software, uninstall it.
Try a safe boot (restart, hold down shift until you see the Apple logo). This does some diagnostic testing and then starts up without third-party added on software. If this eliminates the problems with Mail, then you know the problem is with some third-party software. A safe boot doesn't fix anything, but it tells you where the problem is. Mac OS X: What is Safe Boot, Safe Mode? If the safe boot does indeed eliminate the problems with Mail, then you can try to eliminate the third party software that is causing the problem.
try a test user account: create a new user account. Recreate your mail accounts in that new account and see how Mail runs. If the problems are gone, then you know the problems are in your old user account.
Boot into your recovery partition (restart, hold down ⌘R until you see the Apple logo), and use Disk Utility to repair your hard drive. Repair permissions too while you're there. OS X: About OS X Recovery
sometimes there is a problem with OSX that Disk Utility can't fix, and the solution is to reinstall OSX over your current installation. That usually works for OSX problems.

I have made many attempts to install the 11.1.4.62 iTunes update unsuccesfully! Error 6034, iTunes.exe has made an attempt to load the C runtime library incorrectly. I see that many people is having the same problem. How do I solve it...

I have made many attempts to install the 11.1.4.62 iTunes update unsuccesfully! Error 6034, iTunes.exe has made an attempt to load the C runtime library incorrectly. I see that many people is having the same problem. How do I solve it...

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components; this won't affect its library, but that should be backed up anyway.
(99115)

Audiobook problem ever going to be solved?

Similar Messages

Maybe you are looking for