AUR package for konica minolta laser printer (CUPS)

Question

Hi there,
currently I'm writing a AUR package for the Konica Minolta Magicolor 5430 Desklaser.
I have a question to put the ICC profiles files and special KM files to the cups tree.
The Konica Minolta makefile put the binary "rstertokm5430" to the directory "/usr/lib/cups/filter/" which is completely correct but the *.ppd file and *.icm files are going by default to /usr/share/KONICA_MINOLTA/mc5430DL/Profiles (icm files) and to
/usr/share/cups/model/KONICA_MINOLTA/km5430dl.ppd.gz (ppd file)
The directory in my running archlinux is
usrsharecupsmodel*.ppd and
usrsharecupsprofiles*.icm
Additionally there are "Halftones" files (*.bmp)
usrshareKONICA_MINOLTAmc5430DLHalftones*.bmp
I think about to put the Konica Minolta files in to this (new) directory tree:
usrsharecupskm5430dlmodel*.ppd
usrsharecupskm5430dlprofiles*.icm
usrsharecupskm5430dlhalftones*.bmp
How do I have to copy these files to be archlinux compliant ?
best regards,
Frank

Answer 1

frigg, my apologies for overlooking an important point in my last post. The three magicolor drivers have different version numbers, unlike the other examples of multiple printer drivers in one PKGBUILD. This means you will need one PKGBUILD for each driver, in order to have the correct Arch version number. There is still value in doing them together, since they have many common elements.
As a consequence of this change, I think it might be best to put the single PPD file in /usr/share/cups/model/, rather than have a directory with one ppd file in it.  It appears that the KM_PPDDIR variable in the configure script controls this location, so I have added a sed command to the build script accordingly.
As another consequence, the package names need to be changed. I would suggest cups-mc2430dl, etc. This uses the short internal names used by the drivers, and Arch package names are supposed to be lower-case. This means that your awk script no longer works for all three drivers. Rather than write three different awk scripts, I have ported your directory change to a sed command.  When you package a stand-alone script with the PKGBUILD, you have to also maintain its md5sum, so it is simpler to do everything inside the build script if you can.
Following are the three incomplete PKGBUILD scripts incorporating these changes. They are complete enough that when you run makepkg, they will  download the tarball (if it isn't already present), check its md5sum, copy it into the src directory, uncompress it, and modify the configure script. One way for you to proceed from here is to add lines to the build script, run makepkg, check that the right things happen in the src directory, and then that the correct things are put into the correct place in the pkg directory. The next line in the build script runs configure, which won't finish on my system due to the lack of libjbig.
# Contributor: Frank Ickstadt (frank dot ickstadt at gmail dot com)
# For Konica Minolta magicolor 2430 Desklaser
pkgname=cups-mc2430dl
pkgver=1.6.0
pkgrel=1
pkgdesc="CUPS driver for Konica Minolta magicolor 2430 Desklaser printer"
url="http://konicaminolta.com/"
license="GPL"
depends=('cups' 'gcc')
source=(http://www.linuxprinting.org/download/printing/konicaminolta/magicolor2430DL-$pkgver.tar.gz)
md5sums=('a97b4ee5c949ca791764457ead3a5b9c')
build() {
cd $startdir/src/magicolor2430DL-$pkgver
sed -i '/KM_PPDDIR/s//KONICA_MINOLTA//' ./configure
sed -i "/KM_DATADIR/s/KONICA_MINOLTA/$pkgname/" ./configure
#./configure --prefix=/usr
#make || return 1
#make prefix=$startdir/pkg/usr install
# Contributor: Frank Ickstadt (frank dot ickstadt at gmail dot com)
# For Konica Minolta magicolor 5430 Desklaser
pkgname=cups-mc5430dl
pkgver=1.8.0
pkgrel=1
pkgdesc="CUPS driver for Konica Minolta magicolor 5430 Desklaser printer"
url="http://konicaminolta.com/"
license="GPL"
depends=('cups' 'gcc')
source=(http://www.linuxprinting.org/download/printing/konicaminolta/magicolor5430DL-$pkgver.tar.gz)
md5sums=('1460477f2dd195c301e961a6cbfe1f54')
build() {
cd $startdir/src/magicolor5430DL-$pkgver
sed -i '/KM_PPDDIR/s//KONICA_MINOLTA//' ./configure
sed -i "/KM_DATADIR/s/KONICA_MINOLTA/$pkgname/" ./configure
#./configure --prefix=/usr
#make || return 1
#make prefix=$startdir/pkg/usr install
# Contributor: Frank Ickstadt (frank dot ickstadt at gmail dot com)
# For Konica Minolta magicolor 5440 Desklaser
pkgname=cups-mc5440dl
pkgver=1.2.0
pkgrel=1
pkgdesc="CUPS driver for Konica Minolta magicolor 5440 Desklaser printer"
url="http://konicaminolta.com/"
license="GPL"
depends=('cups' 'gcc')
source=(http://www.linuxprinting.org/download/printing/konicaminolta/magicolor5440DL-$pkgver.tar.gz)
md5sums=('abd54f32517ebeb7a56f902b159c7dea')
build() {
cd $startdir/src/cups-mc5440DL-$pkgver
sed -i '/KM_PPDDIR/s//KONICA_MINOLTA//' ./configure
sed -i "/KM_DATADIR/s/KONICA_MINOLTA/$pkgname/" ./configure
#./configure --prefix=/usr
#make || return 1
#make prefix=$startdir/pkg/usr install