Authentication error when sending email from workflow but list alters email work fine

I have a list. When a user enables alert on this list then he/she is able to receive email from SharePoint when someone adds a new item or change item.
But emails sent by SharePoint workflow or Nintex workflow are not being sent. Error is:
Error 530 5.7.1 Client was not authenticated
Why emails are not being sent by workflows?
EDIT
And by SharePoint workflow, I mean OOB Publishing workflow.

Hi Frank,
For solving your issue , you can do as the followings:
1. Check all the email addresses are valid and they are not blocked by your SMTP admin
2. Check firewall settings if emails are blocking by any firewall or antivirus
3. You need to also check SPLog file if anything log there
4. Also create simple workflow with SharePoint Designer 2013, and give proper email to check whether it is working or not
Here is a similar article for you to take a look at:
http://techsuite.wordpress.com/2008/12/08/workflow-history-the-email-message-cannot-be-sent-make-sure-the-outgoing-email-settings-for-the-server-are-configured-properly/
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Similar Messages

No animation or videos will play from Firefox, but other browsers still work fine. I have checked plugins and even updated to the Firefox 14 beta - no fix

As of yesterday no animation or videos will play from Firefox, but other browsers still work fine. I have checked plugins and even updated to the Firefox 14 beta today, but this did not fix the problem.
this problem started yesterday; before then there was no problem.
I have updated everything I can find, and ran a system restore and disc clean.
The problem still persists. What am I missing here?

This happened to me too. This problem started suddenly with no changes made on my part. I had 11.2 Flash version with Firefox 13. I tried updating to the new Firefox, same problem, then updated to Flash 11.3. I even uninstalled RealPlayer.
I read a solution on another forum and it was as easy as clearing my cache. Everything works fine now (even after reinstalling RealPlayer and allowing the download button function).

E-Mail authentication error when sending emails. Droid X

Problem: On one email account I was unable to send e-mail messages.
Desciption: Get an authentication error after sending attempts
Cause: Unable to access the advanced setting menu for outgoing server
Reason: System software version 2.3.340.MB810 does not have the advanced menus.
Solution: Update Droid X software to version 4.5.596.en.us
Procedure:
1. Go to Settings icon
2. Select About Phone (last choice)
3. Select System Updates
4. Update the software - takes quite a while to download.
5. Install software when prompted.
6. Go to My Accounts
7. Select the problematic E-mail account
8. Go to Outgoing Sever
9. Go to advance settings (NEW)
10. Select the correct authentication settting per your ISP instructions for the outgoing server.
PROBLEM SOLVED!

good post

Error when sending data from Cube to ODS

HI,
I am extracting data from 2lis_02_itm & I stored the data in 0pur_o01(ODS) tha data is fine in ODS but when I am trying to send data from ODS to Cube 0pur_c07 it is giving the above error
InfoSource 80PUR_O01 is not defined in the source system
Errors in source system
InfoSource 80PUR_O01 is not defined in the source system.
Message no. R3005
Diagnosis
The InfoSource 80PUR_O01 specified in the data request, is not defined in the source system.
System response
The data transfer is terminated.
Procedure
In the Administrator Workbench of the Business Information Warehouse, update the metadata for this source system, and delete the InfoPackages belonging to InfoSources that no longer existing
Thanks
Priya

Hi A Priya
First check if infosource 80PUR_O01 is present in datasource list of your BW system. Check this in RSA1-> Infosources-> here do Settings -> display generated objects and then do search on 80PUR_O01.
if it not present there go to ODS 0PUR_O01-> right click
-> generate export datasource.
If it is present there then replicate the datasource by right click on transfer rules and then go to SE38-> Enter program name as RS_TRANSTRU_ACTIVATE_ALL -> Enter Infosource name as 80PUR_O01 and BW System as source system-> Execute. This will activate the transfer rules.
Then try reloading from ODS to cube
Regards
Pradip

Weird error when sending DatagramPackets from a multicastSocket

hi i got this error when running a program that uses a multicastSocket in different Threads
the error is java.lang.NullPointerException: null address || null buffer
        at java.net.TwoStacksPlainDatagramSocketImpl.send(Native Method)
        at java.net.DatagramSocket.send(DatagramSocket.java:638)
        at network.Main$LocalServer.runloop(Main.java:363)
        at network.Main$LocalServer.run(Main.java:382)line 363 is
                DatagramPacket dp=new DatagramPacket(b, 19);
                System.out.println("LocalServer: Packet created with 19 bytes");
                sleep(100);
                SL.send(dp);line 283 is (the run method of LocalServer)
public void run() {
            runloop();
        }variable SL is created at line 173 in class main.java
sl=new MulticastSocket(1234);
            System.out.println("local socket created");
            sa=new MulticastSocket(51234);
            System.out.println("global socket created");
            InetAddress g1=InetAddress.getByName("[ff05::1]");
            InetAddress g2=InetAddress.getByName("[ff1e::1]");
            sl.joinGroup(g1);
            System.out.println("local socket group joined");
            sl.setLoopbackMode(true);
            sa.joinGroup(g2);sl is passed to Thread as SL at line 290:
LocalServer s=new LocalServer(sl);
            s.start();and at line 343
SL=sl;i am using JDK 1.7.0
and Netbeans IDE 6.0
please help me fix this problem!
thanks in advance for any help

The DatagramPacket has to be constructed so as to contain the target address.
MulticastSocket.joinGroup() doesn't help that. It only affects incoming datagrams.

Error when mapping drive with read only permissions - unc path works fine

Hello,
we have user shares that we map to drive H:. the shares are in the form \\server\user\<loginname>. The shares have full permission and the files and folders have full permission for the user. To be clear, the shared folder is \\server\user. <loginname>
are several folders, one for each user.
We use a vb script to check if a user stores too much data and if yes, we set the permissions for the user to read only and delete (with icacls).
Unfortunately, it this happens, we cannot map the drive anymore on Windows 7 (on Windows XP it works fine). The error is "Permission denied". Interestingly, the user can still open the share with the unc - path.
Is there anything I can do, so that the user still has his drive mapped? Most user are not tech savvy enough to open their share with the unc - path.
Thank You,
Peter

Hi Peter,
Sorry for the delay in reply.
Please disable User Account Control in windows 7 to see if you can see the map drive. In the meantime, I suggest to use GPP instead of logon script to map drive.
GP Preferences Will Reduce Logon Scripts : Mapping Drives
http://blogs.technet.com/b/grouppolicy/archive/2009/02/11/gp-preferences-will-reduce-logon-scripts-mapping-drives.aspx
Please refer to the similar thread below to see if it helps:
Windows 7 Drive mapping via Logon script issue
http://social.technet.microsoft.com/Forums/en-US/6cdfae47-1ca0-46e8-8456-6aac2ee616b2/windows-7-drive-mapping-via-logon-script-issue
Regards,
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

How can I fix my text messages I can only text one person from my contacts list is was working fine and now I can only text one person and I do have a plan and like I said I was texting fine Pls help. Thanxs

How can I fix my text messages on my Iphone4s it was working fine but now I can only text one person from my contact list I do have a plan and have tryed reset the iphone4s Can someone help me pls. Thanxs

Why post the same information instead of responding to your initial post?
https://discussions.apple.com/message/17160874#17160874
Gonna go out on a limb here and say it's probably user error.

Error when sending photos from iPhoto 08 (send to e-mail button)......

When I go to e-mail pictures from iPhoto 08 I get the following message (the e-mail is correctly created though), any suggestions on what to fix / look at?
Mail got an error: AppleEvent handler failed http://discussions.apple.com/thread.jspa?threadID=1734304&tstart=0
Little Know Software SignatureProfiler 1.4.10 also installed....
Message was edited by: Matt Packwood

The specific text of the error message is very important here — I'm not sure exactly you're encountering here.
If you're able to connect to your email server and are able send email to other email addresses and if the failures are specific to one email recipient address, then please contact the intended recipient of the failing email, and confirm their address is valid. (This is the way I'm reading your question.)
If you are unable to send any email to any other email addresses and this is specific to your email address, then try the web mail client interface (if one is available) to verify your login user and password, and check with your email ISP for assistance. If your email password works via web mail, follow this Apple troubleshooting guide, then — if everything else fails — I'd probably then entirely remove the email account from Mail.app and re-add it per your email ISP's particular setup requirements. (Some issue with the setup or maybe a corrupt setting in OS X or a problem at the mail ISP servers is a common problem, but this effects attempts to send to all email addresses via that account.)
An email account setup is specific to an email provider, unfortunately. If you're using one of the more common email ISPs, then there are usually setup guides and frequently-asked questions posted online.

Error when sending photos from iPhoto '08.....

When I go to e-mail pictures from iPhoto 08 I get the following message (the e-mail is correctly created though), any suggestions on what to fix / look at?
Mail got an error: AppleEvent handler failed http://discussions.apple.com/thread.jspa?threadID=1734304&tstart=0
Little Know Software SignatureProfiler 1.4.10 also installed....

This
leads to this:
OT

Not too long ago I was able to delete personal info from forwarded emails in Hotmail, but not now. Works fine in IE. What's wrong and where? Txs

Being paranoid, I like to delete personal info (email addresses, etc.) from emails I'm forwarding. Ican do this right now in IE, but not Firefox.
I had been running FF4(?), but downgraded to FF3.5 because of some other issues, but I don't recall when the problem with email started (before or after downgrade).
IE9 allows me to delete this personal info from forwarded emails.

Try an SMC reset. The article covers when this is required, but doing this will not affect anything.
Reset SMC

Error While reading CLOB from Oracle using WebLogic Connection Pool, Works fine with out using pool

PROBLEM DESCRIPTION :
     When I try to read a clob from Oracle, I receive "ORA-03120: two-task
conversion routine: integer overflow" Error.
     This error occurs only for CLOB Type and only if I try to connect to
Oracle using WebLogic JDriver/Oracle POOL.
     IMPORTANT NOTE: I can read CLOB or any other data using direct JDBC
connection to ORacle with out any problem.
     Below Please find the JAVA CODE for Both Working and NON Working .
Created a Connection Pool as:
Name: MyJDBCConnectionPool
URL : jdbc:weblogic:oracle
DIRVER:weblogic.jdbc.oci.Driver
NON WORKING JAVA CODE (USES WEBLOGIC JDBC CONNECTION POOL TO ORACLE):
Driver myDriver =
(Driver)Class.forName("weblogic.jdbc.pool.Driver").newInstance();
Connection mconn =
myDriver.connect("jdbc:weblogic:pool:MyJDBCConnectionPool",null);
mconn.setAutoCommit (false);
CallableStatement cs = mconn.prepareCall("{call
P_XMLTEST2(?)}"); //This returns a CLOB
cs.registerOutParameter(1,java.sql.Types.CLOB);
cs.execute();
Clob clob = null;
clob = cs.getClob(1);
String data =new String();
data = clob.getSubString(1, (int)clob.length());
System.out.println(data); //print the data
data = null;
clob=null;
cs.close();
WORKING JAVA CODE (USES DIRECT THIN JDBC CONNECTION TO ORACLE):
Driver myDriver =
(Driver)Class.forName("oracle.jdbc.driver.OracleDriver").newInstance();
Connection mconn =
myDriver.connect("jdbc:oracle:thin:@server:1521:DB",null);
mconn.setAutoCommit (false);
CallableStatement cs = mconn.prepareCall("{call
P_XMLTEST2(?)}"); //This returns a CLOB
cs.registerOutParameter(1,java.sql.Types.CLOB);
cs.execute();
Clob clob = null;
clob = cs.getClob(1);
String data =new String();
data = clob.getSubString(1, (int)clob.length());
System.out.println(data); //print the data
data = null;
clob=null;
cs.close();
ERROR MESSAGE:
     ORA-03120: two-task conversion routine: integer overflow
I appreciate your help on this problem.

PROBLEM DESCRIPTION :
     When I try to read a clob from Oracle, I receive "ORA-03120: two-task
conversion routine: integer overflow" Error.
     This error occurs only for CLOB Type and only if I try to connect to
Oracle using WebLogic JDriver/Oracle POOL.
     IMPORTANT NOTE: I can read CLOB or any other data using direct JDBC
connection to ORacle with out any problem.
     Below Please find the JAVA CODE for Both Working and NON Working .
Created a Connection Pool as:
Name: MyJDBCConnectionPool
URL : jdbc:weblogic:oracle
DIRVER:weblogic.jdbc.oci.Driver
NON WORKING JAVA CODE (USES WEBLOGIC JDBC CONNECTION POOL TO ORACLE):
Driver myDriver =
(Driver)Class.forName("weblogic.jdbc.pool.Driver").newInstance();
Connection mconn =
myDriver.connect("jdbc:weblogic:pool:MyJDBCConnectionPool",null);
mconn.setAutoCommit (false);
CallableStatement cs = mconn.prepareCall("{call
P_XMLTEST2(?)}"); //This returns a CLOB
cs.registerOutParameter(1,java.sql.Types.CLOB);
cs.execute();
Clob clob = null;
clob = cs.getClob(1);
String data =new String();
data = clob.getSubString(1, (int)clob.length());
System.out.println(data); //print the data
data = null;
clob=null;
cs.close();
WORKING JAVA CODE (USES DIRECT THIN JDBC CONNECTION TO ORACLE):
Driver myDriver =
(Driver)Class.forName("oracle.jdbc.driver.OracleDriver").newInstance();
Connection mconn =
myDriver.connect("jdbc:oracle:thin:@server:1521:DB",null);
mconn.setAutoCommit (false);
CallableStatement cs = mconn.prepareCall("{call
P_XMLTEST2(?)}"); //This returns a CLOB
cs.registerOutParameter(1,java.sql.Types.CLOB);
cs.execute();
Clob clob = null;
clob = cs.getClob(1);
String data =new String();
data = clob.getSubString(1, (int)clob.length());
System.out.println(data); //print the data
data = null;
clob=null;
cs.close();
ERROR MESSAGE:
     ORA-03120: two-task conversion routine: integer overflow
I appreciate your help on this problem.

Authentication Error while Sending Email from SMTP server.

Authentication Error while Sending Email from SMTP server. Can receive emails but cannot send emails from this account.

no email account was setup on the phone unless it was issued by your company.
gmail is required but no server address ports to enter.
my gmail account was setup before i took delivery of the phone but could have been done when phone was activated.
i added cox pop3 email and had to manually enter both pop3 and smtp servers with both boxes checked on both servers.
i doubt if it's a verizon issue.

Sending mail from workflow inbox to outlook,when idoc error occurs

Hi All,
I tried to send a mail to outlook from workflow by giving the email address in the step mail, but it was not working.
i am getting the workitem in the sap inbox so tried setting the automating forward which we can forward from the sap inbox to outlook.
Searched in SDN , but my issue was not solved..
Could you please help me out with this issue to get the mail from workflow to outlook inbox.
Thanks,
Praveena

Hi Praveena,
Please check if the necessary SCOT settings have been made in your system to send mails outside SAP box. Check with your basis team if the SMTP connection between external system (Outlook, Lotus, etc) has been maintained or not.
Then check in t-code SOST if you are getting the mail here when sent from workflow.
Hope this helps!
Regards,
Saumya

When I send photos from my Iphone to an email address they never arrive. Any thoughts?

When I send photos from my iphone to an email, the email seems to send, but the email never arrives at it's destination. Can someone help me fix this?
Thanks.

Has you email ever worked. Are you receiving an error when you send the mail, or is it just sitting in your outbox? Is it just a single individual that is not receiving your mail? Have you tested sendng mail to another individual whos email address you know is valid?

When sending video from my iphone to apple tv it says on screen it is doing it but it wont play on tv but audio works great

when sending video from my iphone to apple tv it says on screen it is doing it but it wont play on tv but audio works great

Welcome to the Apple Community.
Websites and third party Apps need enabling before they will allow AirPlay of Video content. Some Website/App developers have not enabled their products, some simply haven't got around to it yet, others have stated that they won't be enabling AirPlay (likely as a result of licensing issues).
I have created a User Tip to list Apps that have been tested with Video Airplay, if you have any Apps that you have tested please email me details and I'll add them to the User Tip.

Authentication error when sending email from workflow but list alters email work fine

Similar Messages

Maybe you are looking for