Authentication Error while Sending Email from SMTP server.
Authentication Error while Sending Email from SMTP server. Can receive emails but cannot send emails from this account.
no email account was setup on the phone unless it was issued by your company.
gmail is required but no server address ports to enter.
my gmail account was setup before i took delivery of the phone but could have been done when phone was activated.
i added cox pop3 email and had to manually enter both pop3 and smtp servers with both boxes checked on both servers.
i doubt if it's a verizon issue.
Similar Messages
-
Error while sending emails from SOA 11G BPEL
Hi All,
I have configured an error email in my catch/catch-all blocks. Incase I dont have any retry action in my faultpolicies.xml file, the error email is sent fine. However if any remote/binding fault occurs and retry is done on partnerlink, in those cases the Error Notification service fails with below error:
ORABPEL-31015
Error while sending notification.
Error while sending notification to email.
Possible causes : SDPMessaging Driver not configured; Invalid To Address is used; Email server/Messaging gateway is down; using IP address as part of email ID instead of domain name;.
Caused by: javax.naming.NameNotFoundException: While trying to look up comp/env/ejb/services/NotificationServiceBean in /app/ejb/ejb_ob_engine_wls.jar#BPELActivityManagerBean.; remaining name 'comp/env/ejb/services/NotificationServiceBean'
sendEmailNotification WSIF Exception occured. Please check stack trace "Cannot get Object part 'Responses'. No parts are set on the message"
If I throw a remote/binding fault (throw activity), the error email gets sent. However whenever the retry happens incase of a fault, the above error comes.
Any idea what can be reason behing this...
Regards
Subhankartry to call a sub process from your catch all block and use the email activity in that subprocess. this should work
-
SMICM error while sending mail using SMTP server
Hi All,
We are not able send mails using SMTP server.
We have made every settings necessary in SCOT, SO16 , SMTP service is activated, default domain is maintained etc
Only things which seems to be wrong is in SMICM trace file.
[Thr 13] *** ERROR => NiBufIConnect: non-buffered connect pending after 5000ms (hdl 29;10.26.24.44:1090) [nibuf.cpp 4608]
[Thr 13] *** WARNING => Connection request from (0/1/0) to host: 10.26.24.44, service: 1090 failed (NIECONN_REFUSED)
[icxxconn_mt.c 2321]
This error is getting repeated in it.
BUt I am not sure why it it trying to hit 10.26.24.44, as we dont have any server by this ip. The ip is only not resolvable from the server.
1 more thing, at OS level, following parameter is maintained in profile :
icm/server_port_1 = PROT=SMTP,PORT=25000,TIMEOUT=180
But in SCOT, under SMTP node PORT is given as 25.
Kindly let me know what going wrong here?
Thanksalso getting error as follows
Error: System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.Net.Mail.SmtpException: The SMTP server requires a secure connection or the client was not authenticated. The server response was: 5.5.1
Authentication Required. Learn more at
at System.Net.Mail.MailCommand.CheckResponse(SmtpStatusCode statusCode, String response)
at System.Net.Mail.MailCommand.Send(SmtpConnection conn, Byte[] command, String from)
at System.Net.Mail.SmtpTransport.SendMail(MailAddress sender, MailAddressCollection recipients, String deliveryNotify, SmtpFailedRecipientException& exception)
at System.Net.Mail.SmtpClient.Send(MailMessage message)
at ST_c121e07caaa94c21bb1355d4f753112f.vbproj.ScriptMain.Main()
--- End of inner exception stack trace ---
at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
at System.RuntimeType.InvokeMember(String name, BindingFlags bindingFlags, Binder binder, Object target, Object[] providedArgs, ParameterModifier[] modifiers, CultureInfo culture, String[] namedParams)
at System.Type.InvokeMember(String name, BindingFlags invokeAttr, Binder binder, Object target, Object[] args, CultureInfo culture)
at Microsoft.SqlServer.Dts.Tasks.ScriptTask.VSTATaskScriptingEngine.ExecuteScript() -
Error while sending email from MOSS portal
Hi,
I have configured email settings on my MOSS central admin, still MOSS throws error while trying to send emails to AD users. I tried to give permission for a user in a site and it threw this error:
The user or users have been added successfully, but there was an error in sending the e-mail message. The server may not be set up correctly to send e-mail. To verify that e-mail is configured correctly, contact your server administrator. at Microsoft.SharePoint.ApplicationPages.AclInv.SendEmailInvitation(PeopleEditor picker, String subject, String message)
at Microsoft.SharePoint.ApplicationPages.AclInv.BtnOK_Click(Object sender, EventArgs e)
at System.Web.UI.WebControls.Button.OnClick(EventArgs e)
at System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument)
at System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument)
at System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument)
at System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
I have provided outbound smtp server address and the email addresses as well.
Regards,
ManojOk, issue solved!! The issue was that I had to set anonymous connection directly to server. Error provided by SharePoint didn't help at all. After hours of hair-pulling and head-banging, I found a nice article that detailed how to troubleshoot e-mail issues:
http://www.tonytestasworld.com/post/2009/04/09/SharePoint-2007-Outgoing-E-mail-Troubleshooting-Tips.aspx
In the above article, the troubleshooting step 5 was the breaking point. As suggested in the blog:
http://www.sharepointblogs.com/johnwpowell/archive/2007/07/10/alerts-failing-cannot-connect-to-smtp-host.aspx
I created a C# console application and it gave me the correct error:
The SMTP server requires a secure connection or the client was not authenticated. The server response was: 5.7.1 Client was not authenticated
So I used this code to create an SMTP test application:
using System;
using System.Collections.Generic;
using System.Text;
using System.Net.Mail;
public class Program
public static void Main(string[] args)
try
// Check arguments
if (args.Length != 3)
ShowUsage();
return;
// Create message
MailMessage mmMessage = new MailMessage();
mmMessage.To.Add(new MailAddress(args[2] as string));
mmMessage.From = new MailAddress(args[1] as string);
mmMessage.Subject = "TestMail";
mmMessage.Body = "This is a test";
// Send message
SmtpClient sc = new SmtpClient(args[0] as string);
sc.Send(mmMessage);
catch (Exception ex)
Console.WriteLine(ex);
finally
//Pause
Console.WriteLine();
Console.Write("Press a key >");
Console.ReadKey();
private static void ShowUsage()
Console.WriteLine("Usage");
Console.WriteLine("TestMail [SmtpServer] [FromAddress] [ToAddress]");
} // end Program
This command saved lots of trouble for me and solved the email issue:
http://forums.msexchange.org/m_1800412705/mpage_1/key_/tm.htm
set-ReceiveConnector "default sfzcombx" -permissiongroups:"ExchangeUsers,ExchangeServers,ExchangeLegacyServers,AnonymousUsers"
Hope this helps somebody!
Regards,
Manoj -
Error while sending email from ABAP
Hi
I am using function module SO_NEW_DOCUMENT_ATT_SEND_API1 to send the email to an external id.
In the debugging mode i can see the function module is getting executed successfully i.e sy-surc value is 0.
But i am getting a sucess message i.e "No message sent".
Has anybody faced this kind of problem.Please let me know how to rectify this error
Thanks
DebrajHi Deb,
Have you done the relevant configuration in SCOT transaction to connect to a SMTP server and also as per note 455140???
Also this blog from Thomas Jung could help you...
/people/thomas.jung3/blog/2004/09/08/sending-e-mail-from-abap--version-610-and-higher--bcs-interface
Cheers
JK -
Authentication error when sending email from workflow but list alters email work fine
I have a list. When a user enables alert on this list then he/she is able to receive email from SharePoint when someone adds a new item or change item.
But emails sent by SharePoint workflow or Nintex workflow are not being sent. Error is:
Error 530 5.7.1 Client was not authenticated
Why emails are not being sent by workflows?
EDIT
And by SharePoint workflow, I mean OOB Publishing workflow.Hi Frank,
For solving your issue , you can do as the followings:
1. Check all the email addresses are valid and they are not blocked by your SMTP admin
2. Check firewall settings if emails are blocking by any firewall or antivirus
3. You need to also check SPLog file if anything log there
4. Also create simple workflow with SharePoint Designer 2013, and give proper email to check whether it is working or not
Here is a similar article for you to take a look at:
http://techsuite.wordpress.com/2008/12/08/workflow-history-the-email-message-cannot-be-sent-make-sure-the-outgoing-email-settings-for-the-server-are-configured-properly/
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support -
Error while sending email using TemplateEmailSender in CSC server
Hi,
We are trying to send email using TemplateEmailSender from CSC server. But it is giving Null Pointer Exception in ProfiledMessageSource like below. The same code is working fine in commerce instance but it is failing in CSC instance. We are using ATG2007.1p3
Any pointers would be helpful.
Below is the error.
Error while sending email
java.lang.NullPointerException
at atg.userprofiling.dms.ProfiledMessageSource.isConfiguredForProfileSubject(ProfiledMessageSource.java:196)
at atg.userprofiling.dms.DPSMessageSource.fireEndSessionMessage(DPSMessageSource.java:864)
at atg.userprofiling.dms.DPSMessageSource.fireEndSessionMessage(DPSMessageSource.java:848)
at atg.userprofiling.SessionEventTrigger.nameContextElementPreUnbound(SessionEventTrigger.java:553)
at atg.nucleus.GenericContext.sendPreUnboundEvent(GenericContext.java:200)
at atg.nucleus.GenericContext.preNotifyRemovedObject(GenericContext.java:528)
at atg.nucleus.GenericContext.removeElement(GenericContext.java:566)
at atg.servlet.SessionNameContext.unbindFromNameContext(SessionNameContext.java:557)
at atg.servlet.SessionNameContext.stopSession(SessionNameContext.java:534)
at atg.servlet.SessionNameContext.decrementWrapperCount(SessionNameContext.java:242)
at atg.servlet.SessionBindingReporter.valueUnbound(SessionBindingReporter.java:206)
at org.apache.catalina.session.StandardSession.removeAttributeInternal(StandardSession.java:1625)
at org.apache.catalina.session.StandardSession.expire(StandardSession.java:749)
at org.apache.catalina.session.StandardSession.expire(StandardSession.java:655)
at org.apache.catalina.session.StandardSession.invalidate(StandardSession.java:1100)
at org.apache.catalina.session.StandardSessionFacade.invalidate(StandardSessionFacade.java:150)
at atg.userprofiling.email.TemplateInvoker$TemplateSession.endSession(TemplateInvoker.java:935)
at atg.userprofiling.email.TemplateEmailSender.createMessage(TemplateEmailSender.java:2387)Thanks for the reply.
My issue is fixed now. It is JBOSS configuration issue. Sessions are not maintained properly that's why we are getting NULL profile in the session. Our application has multiple WARs so we fixed it by setting emptySessionPath to TRUE. If emptySessionPath attribute in server.xml is false, then each WAR will have its own jsessionid cookie.
I did not touch ProfiledMessageSource as its required for session triggering. -
Error while sending data from XI to BI System
Hello Friends,
I m facing an error while sending data from XI to BI. XI is successfully recived data from FTP.
Given error i faced out in communication channel monitoring:-
Receiver channel 'POSDMLog_Receiver' for party '', service 'Busys_POSDM'
Error can not instantiate RfcPool caused by:
com.sap.aii.af.rfc.RfcAdapterException: error initializing RfcClientPool:com.sap.aii.af.rfc.core.repository.RfcRepositoryException: can not connect to destination system due to: com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed
Connect_PM TYPE=A ASHOST=10.1.45.35 SYSNR=01 GWHOST=10.1.45.35 GWSERV=sapgw01 PCS=1
LOCATION CPIC (TCP/IP) on local host with Unicode
ERROR partner '10.1.45.35:sapgw01' not reached
TIME Fri Apr 16 08:15:18 2010
RELEASE 700
COMPONENT NI (network interface)
VERSION 38
RC -10
MODULE nixxi.cpp
LINE 2823
DETAIL NiPConnect2
SYSTEM CALL connect
ERRNO 10061
ERRNO TEXT WSAECONNREFUSED: Connection refused
COUNTER 2
Error displaying in message monitoring:-
Exception caught by adapter framework: RfcAdapter: receiver channel has static errors: can not instantiate RfcPool caused by: com.sap.aii.af.rfc.RfcAdapterException: error initializing RfcClientPool:com.sap.aii.af.rfc.core.repository.RfcRepositoryException: can not connect to destination system due to: com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed Connect_PM TYPE=A ASHOST=10.1.45.35 SYSNR=01 GWHOST=10.1.45.35 GWSERV=sapgw01 PCS=1 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR partner '10.1.45.35:sapgw01' not reached TIME Fri Apr 16 08:15:18 2010 RELEASE 70
Delivery of the message to the application using connection RFC_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: RfcAdapter: receiver channel has static errors: can not instantiate RfcPool caused by: com.sap.aii.af.rfc.RfcAdapterException: error initializing RfcClientPool:com.sap.aii.af.rfc.core.repository.RfcRepositoryException: can not connect to destination system due to: com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed Connect_PM TYPE=A ASHOST=10.1.45.35 SYSNR=01 GWHOST=10.1.45.35 GWSERV=sapgw01 PCS=1 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR partner '10.1.45.35:sapgw01' not reached TIME.
Kindly suggest me & provide details of error.
Regards,
NarendraHi Narendra,
Message is clearly showing that your system is not reachable
102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed Connect_PM TYPE=A ASHOST=10.1.45.35 SYSNR=01 GWHOST=10.1.45.35 GWSERV=sapgw01 PCS=1 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR partner '10.1.45.35:sapgw01' not reached
Please check to ping the BI server IP 10.1.45.35 from your XI server , in case its working you can check telnet to SAP standard port like 3201/3601/3301/3901 etc.
It seems to be connectivity issue only.
Make sure your both the systems are up and running.
Revert back after checking above stuff.
Regards,
Gagan Deep Kaushal -
Error while sending email to external mail - Urgent
Hi All,
I am getting error while sending email with attachement. The Error code is 02.
I am not able to identify the error. bold Please help me in solving this problem.
Is it anything wrong with the code or Any Configuration with SCOT/SOST.bold
the code i am using is :
REPORT YVR_F MESSAGE-ID XX .
TABLES : EDIDC, EDIDS, EDPAR.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME.
PARAMETERS : P_STATUS LIKE EDIDC-STATUS DEFAULT '51'.
SELECT-OPTIONS : S_DIRECT FOR EDIDC-DIRECT,
S_MESTYP FOR EDIDC-MESTYP,
S_CREDAT FOR EDIDC-CREDAT.
SELECTION-SCREEN END OF BLOCK B1 .
PARAMETER: P_EMAIL LIKE SOMLRECI1-RECEIVER,
P_SENDER LIKE SOMLRECI1-RECEIVER no-display,
P_DELSPL AS CHECKBOX,
P_ONLINE NO-DISPLAY.
DATA : TB_EDIDC LIKE STANDARD TABLE OF EDIDC INITIAL SIZE 0 WITH HEADER
LINE.
DATA : TB_EDPAR LIKE STANDARD TABLE OF EDPAR INITIAL SIZE 0 WITH HEADER
LINE.
DATA : TB_KNA1 LIKE STANDARD TABLE OF KNA1 INITIAL SIZE 0 WITH HEADER
LINE.
DATA : TB_ADRC LIKE STANDARD TABLE OF ADRC INITIAL SIZE 0 WITH HEADER
LINE.
DATA: INT_PDF TYPE TABLE OF TLINE WITH HEADER LINE.
DATA : BEGIN OF TB_ED OCCURS 0,
SNDPRN LIKE EDIDC-SNDPRN,
LOC LIKE ADRC-BUILDING,
DOCNUM LIKE EDIDC-DOCNUM,
IDOCTP LIKE EDIDC-IDOCTP,
MESTYP LIKE EDIDC-MESTYP,
DIRECT LIKE EDIDC-DIRECT,
CREDAT LIKE EDIDC-CREDAT,
STATUS LIKE EDIDC-STATUS,
END OF TB_ED.
DATA: IT_MESSAGE TYPE STANDARD TABLE OF SOLISTI1 INITIAL SIZE 0
WITH HEADER LINE.
DATA: IT_ATTACH TYPE STANDARD TABLE OF SOLISTI1 INITIAL SIZE 0
WITH HEADER LINE.
Job Runtime Parameters
DATA: GD_EVENTID LIKE TBTCM-EVENTID,
GD_EVENTPARM LIKE TBTCM-EVENTPARM,
GD_EXTERNAL_PROGRAM_ACTIVE LIKE TBTCM-XPGACTIVE,
GD_JOBCOUNT LIKE TBTCM-JOBCOUNT,
GD_JOBNAME LIKE TBTCM-JOBNAME,
GD_STEPCOUNT LIKE TBTCM-STEPCOUNT,
GD_ERROR TYPE SY-SUBRC,
GD_RECIEVER TYPE SY-SUBRC.
DATA: W_RECSIZE TYPE I,
W_SPOOL_NR LIKE SY-SPONO.
%_print LIKE pri_params.
DATA: GD_SUBJECT LIKE SODOCCHGI1-OBJ_DESCR,
IT_MESS_BOD LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
IT_MESS_ATT LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
GD_SENDER_TYPE LIKE SOEXTRECI1-ADR_TYP,
GD_ATTACHMENT_DESC TYPE SO_OBJ_NAM,
GD_ATTACHMENT_NAME TYPE SO_OBJ_DES.
Spool to PDF conversions
DATA: GD_SPOOL_NR LIKE TSP01-RQIDENT,
GD_DESTINATION LIKE RLGRAP-FILENAME,
GD_BYTECOUNT LIKE TST01-DSIZE,
GD_BUFFER TYPE STRING.
Binary store for PDF
DATA: BEGIN OF IT_PDF_OUTPUT OCCURS 0.
INCLUDE STRUCTURE TLINE.
DATA: END OF IT_PDF_OUTPUT.
DATA: GD_RECSIZE TYPE I.
CONSTANTS: C_DEV LIKE SY-SYSID VALUE 'DEV',
C_NO(1) TYPE C VALUE ' ',
C_DEVICE(4) TYPE C VALUE 'LOCL'.
DATA: T_PACKING_LIST LIKE SOPCKLSTI1 OCCURS 0 WITH HEADER LINE,
T_CONTENTS LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
T_RECEIVERS LIKE SOMLRECI1 OCCURS 0 WITH HEADER LINE,
T_ATTACHMENT LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
T_OBJECT_HEADER LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
W_CNT TYPE I,
W_SENT_ALL(1) TYPE C,
W_DOC_DATA LIKE SODOCCHGI1.
DATA : MSTR_PRINT_PARMS LIKE PRI_PARAMS,
MC_VALID,
P_REPID LIKE SY-REPID,
WF_ID LIKE TSP01-RQIDENT,
LOC_BYTECOUNT TYPE I.
*start-of-selection.
MSTR_PRINT_PARMS-PDEST = 'LOCL'.
P_REPID = SY-REPID.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
authority= ' '
COPIES = '1'
COVER_PAGE = SPACE
DATA_SET = SPACE
DEPARTMENT = SPACE
DESTINATION = 'LP01'
EXPIRATION = '1'
IMMEDIATELY = 'X'
LAYOUT = 'X_65_132'
MODE = SPACE
NEW_LIST_ID = 'X'
NO_DIALOG = 'X'
USER = SY-UNAME
IMPORTING
OUT_PARAMETERS = MSTR_PRINT_PARMS
VALID = MC_VALID
EXCEPTIONS
ARCHIVE_INFO_NOT_FOUND = 1
INVALID_PRINT_PARAMS = 2
INVALID_ARCHIVE_PARAMS = 3
OTHERS = 4.
SUBMIT (P_REPID) TO SAP-SPOOL WITHOUT SPOOL DYNPRO
SPOOL PARAMETERS MSTR_PRINT_PARMS.
AND RETURN.
NEW-PAGE PRINT ON NO DIALOG PARAMETERS
MSTR_PRINT_PARMS.
perform data.
NEW-PAGE PRINT OFF. "This marks the end of the screen for which the
*SPOOL NO WAS GENERATED.
WF_ID = SY-SPONO.
*converting spool to pdf
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
EXPORTING
SRC_SPOOLID = WF_ID "SPOOL NUMBER
NO_DIALOG = SPACE
PDF_DESTINATION = 'X'
IMPORTING
PDF_BYTECOUNT =
LOC_BYTECOUNT "NUMBER OF BYTES TRANSFERRED
TABLES
PDF = INT_PDF "TABLE FOR PDF REPORT
EXCEPTIONS
ERR_NO_ABAP_SPOOLJOB = 1
ERR_NO_SPOOLJOB = 2
ERR_NO_PERMISSION = 3
ERR_CONV_NOT_POSSIBLE = 4
ERR_BAD_DESTDEVICE = 5
USER_CANCELLED = 6
ERR_SPOOLERROR = 7
ERR_TEMSEERROR = 8
ERR_BTCJOB_OPEN_FAILED = 9
ERR_BTCJOB_SUBMIT_FAILED = 10
ERR_BTCJOB_CLOSE_FAILED = 11
OTHERS = 12.
*CALL FUNCTION 'DOWNLOAD'
*EXPORTING
*bin_filesize = loc_bytecount "NO. OF BYTES
*filename = 'C:/EMAILPDF.PDF'
*filetype = 'BIN'
**IMPORTING
**act_filename = loc_filename
*TABLES
*data_tab = int_pdf.
IF P_DELSPL EQ 'X'.
PERFORM DELETE_SPOOL.
ENDIF.
Transfer the 132-long strings to 255-long strings
LOOP AT INT_PDF.
TRANSLATE INT_PDF USING ' ~'.
CONCATENATE GD_BUFFER INT_PDF INTO GD_BUFFER.
ENDLOOP.
TRANSLATE GD_BUFFER USING '~ '.
DO.
IT_MESS_ATT = GD_BUFFER.
APPEND IT_MESS_ATT.
SHIFT GD_BUFFER LEFT BY 255 PLACES.
IF GD_BUFFER IS INITIAL.
EXIT.
ENDIF.
ENDDO.
DESCRIBE TABLE IT_MESS_ATT LINES GD_RECSIZE.
CHECK GD_RECSIZE > 0.
PERFORM SENDMAIL USING P_EMAIL..
*& Form sendmail
text
--> p1 text
<-- p2 text
FORM SENDMAIL USING P_EMAIL.
CHECK NOT ( P_EMAIL IS INITIAL ).
REFRESH IT_MESS_BOD.
Default subject matter
GD_SUBJECT = 'Subject'.
GD_ATTACHMENT_DESC = 'IDOC LIST'.
CONCATENATE 'attach_name' ' ' INTO gd_attachment_name.
IT_MESS_BOD = 'List Of Failed Idocs'.
APPEND IT_MESS_BOD.
IT_MESS_BOD = 'List Of Failed Idocs'.
APPEND IT_MESS_BOD.
If no sender specified - default blank
IF P_SENDER EQ SPACE.
GD_SENDER_TYPE = SPACE.
ELSE.
GD_SENDER_TYPE = 'INT'.
ENDIF.
Send file by email as .xls speadsheet
PERFORM SEND_FILE_AS_EMAIL_ATTACHMENT
TABLES IT_MESS_BOD
IT_MESS_ATT
USING P_EMAIL
'Document attachment'
'PDF'
GD_ATTACHMENT_NAME
GD_ATTACHMENT_DESC
P_SENDER
GD_SENDER_TYPE
CHANGING GD_ERROR
GD_RECIEVER.
ENDFORM. " sendmail
*& Form DELETE_SPOOL
text
--> p1 text
<-- p2 text
FORM DELETE_SPOOL.
DATA: LD_SPOOL_NR TYPE TSP01_SP0R-RQID_CHAR.
LD_SPOOL_NR = WF_ID. "GD_SPOOL_NR.
CHECK P_DELSPL <> C_NO.
CALL FUNCTION 'RSPO_R_RDELETE_SPOOLREQ'
EXPORTING
SPOOLID = LD_SPOOL_NR.
ENDFORM. " DELETE_SPOOL
*& Form SEND_FILE_AS_EMAIL_ATTACHMENT
text
-->P_IT_MESS_BOD text
-->P_IT_MESS_ATT text
-->P_P_EMAIL text
-->P_0846 text
-->P_0847 text
-->P_GD_ATTACHMENT_NAME text
-->P_GD_ATTACHMENT_DESC text
-->P_P_SENDER text
-->P_GD_SENDER_TYPE text
<--P_GD_ERROR text
<--P_GD_RECIEVER text
FORM SEND_FILE_AS_EMAIL_ATTACHMENT TABLES IT_MESSAGE
IT_ATTACH
USING P_EMAIL
P_MTITLE
P_FORMAT
P_FILENAME
P_ATTDESCRIPTION
P_SENDER_ADDRESS
P_SENDER_ADDRES_TYPE
CHANGING P_ERROR
P_RECIEVER.
DATA: LD_ERROR TYPE SY-SUBRC,
LD_RECIEVER TYPE SY-SUBRC,
LD_MTITLE LIKE SODOCCHGI1-OBJ_DESCR,
LD_EMAIL LIKE SOMLRECI1-RECEIVER,
LD_FORMAT TYPE SO_OBJ_TP ,
LD_ATTDESCRIPTION TYPE SO_OBJ_NAM ,
LD_ATTFILENAME TYPE SO_OBJ_DES ,
LD_SENDER_ADDRESS LIKE SOEXTRECI1-RECEIVER,
LD_SENDER_ADDRESS_TYPE LIKE SOEXTRECI1-ADR_TYP,
LD_RECEIVER LIKE SY-SUBRC.
DATA: T_PACKING_LIST LIKE SOPCKLSTI1 OCCURS 0 WITH HEADER LINE,
T_CONTENTS LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
T_RECEIVERS LIKE SOMLRECI1 OCCURS 0 WITH HEADER LINE,
T_ATTACHMENT LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
T_OBJECT_HEADER LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
W_CNT TYPE I,
W_SENT_ALL(1) TYPE C,
W_DOC_DATA LIKE SODOCCHGI1.
LD_EMAIL = P_EMAIL.
LD_MTITLE = P_MTITLE.
LD_FORMAT = P_FORMAT.
LD_ATTDESCRIPTION = P_ATTDESCRIPTION.
LD_ATTFILENAME = P_FILENAME.
LD_SENDER_ADDRESS = P_SENDER.
LD_SENDER_ADDRESS_TYPE = P_SENDER_ADDRES_TYPE.
Fill the document data.
W_DOC_DATA-DOC_SIZE = 1.
Populate the subject/generic message attributes
W_DOC_DATA-OBJ_LANGU = SY-LANGU.
W_DOC_DATA-OBJ_NAME = 'SAPRPT'.
W_DOC_DATA-OBJ_DESCR = LD_MTITLE .
W_DOC_DATA-SENSITIVTY = 'F'.
Fill the document data and get size of attachment
CLEAR W_DOC_DATA.
READ TABLE IT_ATTACH INDEX W_CNT.
W_DOC_DATA-DOC_SIZE =
( W_CNT - 1 ) * 255 + STRLEN( IT_ATTACH ).
W_DOC_DATA-OBJ_LANGU = SY-LANGU.
W_DOC_DATA-OBJ_NAME = 'SAPRPT'.
W_DOC_DATA-OBJ_DESCR = LD_MTITLE.
W_DOC_DATA-SENSITIVTY = 'F'.
CLEAR T_ATTACHMENT.
REFRESH T_ATTACHMENT.
T_ATTACHMENT[] = IT_ATTACH[].
Describe the body of the message
CLEAR T_PACKING_LIST.
REFRESH T_PACKING_LIST.
T_PACKING_LIST-TRANSF_BIN = SPACE.
T_PACKING_LIST-HEAD_START = 1.
T_PACKING_LIST-HEAD_NUM = 0.
T_PACKING_LIST-BODY_START = 1.
DESCRIBE TABLE IT_MESSAGE LINES T_PACKING_LIST-BODY_NUM.
T_PACKING_LIST-DOC_TYPE = 'RAW'.
APPEND T_PACKING_LIST.
Create attachment notification
T_PACKING_LIST-TRANSF_BIN = 'X'.
T_PACKING_LIST-HEAD_START = 1.
T_PACKING_LIST-HEAD_NUM = 1.
T_PACKING_LIST-BODY_START = 1.
DESCRIBE TABLE T_ATTACHMENT LINES T_PACKING_LIST-BODY_NUM.
T_PACKING_LIST-DOC_TYPE = LD_FORMAT.
T_PACKING_LIST-OBJ_DESCR = LD_ATTDESCRIPTION.
T_PACKING_LIST-OBJ_NAME = LD_ATTFILENAME.
T_PACKING_LIST-DOC_SIZE = T_PACKING_LIST-BODY_NUM * 255.
APPEND T_PACKING_LIST.
Add the recipients email address
CLEAR T_RECEIVERS.
REFRESH T_RECEIVERS.
T_RECEIVERS-RECEIVER = p_EMAIL.
T_RECEIVERS-REC_TYPE = 'U'.
T_RECEIVERS-COM_TYPE = 'INT'.
T_RECEIVERS-NOTIF_DEL = 'X'.
T_RECEIVERS-NOTIF_NDEL = 'X'.
APPEND T_RECEIVERS.
DATA: objhead LIKE solisti1 OCCURS 1 WITH HEADER LINE.
W_SENT_ALL = 'X'.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
DOCUMENT_DATA = W_DOC_DATA
PUT_IN_OUTBOX = 'X'
SENDER_ADDRESS = LD_SENDER_ADDRESS
SENDER_ADDRESS_TYPE = LD_SENDER_ADDRESS_TYPE
COMMIT_WORK = 'X'
IMPORTING
SENT_TO_ALL = W_SENT_ALL
TABLES
PACKING_LIST = T_PACKING_LIST
object_header = objhead
CONTENTS_BIN = T_ATTACHMENT
CONTENTS_TXT = IT_MESSAGE
RECEIVERS = T_RECEIVERS
EXCEPTIONS
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
OPERATION_NO_AUTHORIZATION = 4
OTHERS = 99.
IF SY-SUBRC NE 0.
MESSAGE E000 WITH 'Error occurred while sending'.
ELSE.
MESSAGE I000 WITH 'The document was sent'.
ENDIF.
ENDFORM. " SEND_FILE_AS_EMAIL_ATTACHMENT
*& Form data
text
--> p1 text
<-- p2 text
FORM data.
SELECT SNDPRN
DOCNUM
IDOCTP
MESTYP
DIRECT
CREDAT
STATUS
FROM EDIDC
INTO CORRESPONDING FIELDS
OF TABLE TB_EDIDC
WHERE STATUS = P_STATUS
AND MESTYP IN S_MESTYP
AND DIRECT IN S_DIRECT
AND CREDAT IN S_CREDAT.
SELECT KUNNR
INPNR
FROM EDPAR
INTO CORRESPONDING FIELDS
OF TABLE TB_EDPAR
FOR ALL ENTRIES IN TB_EDIDC
WHERE KUNNR = TB_EDIDC-SNDPRN.
SELECT KUNNR
ADRNR
FROM KNA1
INTO CORRESPONDING FIELDS
OF TABLE TB_KNA1
FOR ALL ENTRIES IN TB_EDPAR
WHERE KUNNR = TB_EDPAR-INPNR.
SELECT ADDRNUMBER
BUILDING
FROM ADRC
INTO CORRESPONDING FIELDS
OF TABLE TB_ADRC
FOR ALL ENTRIES IN TB_KNA1
WHERE ADDRNUMBER = TB_KNA1-ADRNR.
LOOP AT TB_EDIDC WHERE STATUS = P_STATUS
AND MESTYP IN S_MESTYP
AND DIRECT IN S_DIRECT
AND CREDAT IN S_CREDAT.
TB_ED-SNDPRN = TB_EDIDC-SNDPRN.
TB_ED-DOCNUM = TB_EDIDC-DOCNUM.
TB_ED-IDOCTP = TB_EDIDC-IDOCTP.
TB_ED-MESTYP = TB_EDIDC-MESTYP.
TB_ED-DIRECT = TB_EDIDC-DIRECT.
TB_ED-CREDAT = TB_EDIDC-CREDAT.
TB_ED-STATUS = TB_EDIDC-STATUS.
READ TABLE TB_EDPAR WITH KEY KUNNR = TB_EDIDC-SNDPRN.
READ TABLE TB_KNA1 WITH KEY KUNNR = TB_EDPAR-INPNR.
READ TABLE TB_ADRC WITH KEY ADDRNUMBER = TB_KNA1-ADRNR.
TB_ED-LOC = TB_ADRC-BUILDING.
APPEND TB_ED.
ENDLOOP.
WRITE :/02 'CustomerNo',
15 'Location Code',
30 'Idoc Number',
55 'Basic Type',
70 'Message Type',
95 'Direction',
110 'Received Date',
130 'Status'.
ULINE.
LOOP AT TB_ED.
WRITE :/02 TB_ED-SNDPRN,
15 TB_ED-LOC,
30 TB_ED-DOCNUM,
55 TB_ED-IDOCTP,
70 TB_ED-MESTYP,
95 TB_ED-DIRECT,
110 TB_ED-CREDAT,
130 TB_ED-STATUS.
ENDLOOP.
ENDFORM. " data
Kindly help me in solving the issue.
Thanks in advance.
Suki.Hi,
Check in transaction SCOT. If your mail is in error status in SCOT, you can assure that there is no problem with your code. If your message has not reached till SCOT, then the problem will be with the code.
If the mail is there in scot with error status tell the BASIS to configure it. I feel this could be the problem.
Regards,
Renjith Michael. -
Error while sending mail from SAP
Hello All,
Recently we are facing an error while sending mail from SAP. When we try to compose a message ,it is moving to a dump error RAISE_EXCEPTION.
The details from ST22,
Short text
Exception condition "FOLDER_NOT_EXIST" raised.
Error analysis
A RAISE statement in the program "SA
condition "FOLDER_NOT_EXIST".
Since the exception was not intercep
program, processing was terminated.
Kindly suggest..
Thank You,
Regards,
HasanHello Priyanka,
Actually, I performed the following two steps in order to solve the issue:
- In transaction SICF, the node for SAPConnect must be active. In our system, this node was in inactive state. Hence I activated it.
- Then In transaction SCOT-> Settings menu--> default domain should be 'xyz.com' if the email addresses in your company are maintained with a suffix xyz.com.
But for me the problem didnt get solved here..
The problem that i am facing now is that if in my user profile, I have the email address maintained, then i get an error saying 'Sender address rejected'. However, if i goto transaction SU01 and clear the email id, the mail is successfully sent to outer world.
You can try the above mentioned two steps using SICF and SCOT. If the problem does not get solved then try clearing the mail id in ur user profile.
Hope this helps. If you find an answer to the problem of the mail id getting cleared, then please let me know..
Regards,
Himanshu -
SOAP Receiver- Error While Sending Message: 500 Internal Server Error
Hello,
Our scenario: IDoc to SOAP
I have added a third party system in the SLD and have used the same in my ID configuration.
An idoc will be triggered from R/3, which will received in PI, PI will transform the IDoc into SOAP message for the third party system.
I have tested the scenario in ID from Interface Determination and its successful.
But when i try to try to test it from RWB, using Test Message in Adapter Engine, I get an error,
"Error while sending message:500 Internal server error"
If we test it using a testing software like SOAP UI, it works fine but from PI we get the error mentioned above.
Regards,
AbhishekHello,
Since the IDOC adapter resides on the ABAP stack, you can use this URL instead (it will be sent to the integration engine as Venkata suggested)
http://host:port/sap/xi/engine?type=entry
Also check your firewall settings from PI to the third-party system.
Hope this helps,
Mark
Edited by: Mark Dihiansan on Feb 7, 2012 11:48 AM -
" Error while sending message: 500 Internal Server Error" RNIF Adapter
Hi,
I have configured B2B integration as Sender : RNIF adapter & Receiver: XI Adapter.
I am able to test the configuration successfully in ESR and ID. But, whille testing with RWB using same test data, i am getting the following error:
Error while sending message: 500 Internal Server Errot.
Could you anybody help me, what could be the reason? Even i am not getting any error messages in SXMB_MONI.
Thanks
LaxmanHope this helps..
-Is the 500 internal SErver Error in RWB is only for this issue and the message is successfully processed in SXMB_MONI?
Could be the PI Service User :PIAFUSER(Adapter framework user) login crendential issue or run out time error.
Try taking the payload from sxmb_moni and enter it in RWB > Adater engine> Test Message Tab > give proper sender interface information , enter payload and try sending message. check what is behaviour -
Error While sending infopackages from OLTP to BI/urgent
Hi BW friends
im workin on production support and im new to it.while
running infopackage X ,it is throwing a error
error:While sending infopackages from OLTP to BI/urgent
In status tab it shows traingular yellow colour
and diagnosis says that No idocs could be sent to bi using rfc.
so if u know please reply me
Thank you
Amarnath kwhile loading data into the target we got this message and the solution is do manual update for that.
-
Imp: Error while sending message: 500 Internal Server Error
Hi all
while testing my scenarios- by sending the message through component monitoring in RWB I get the following error in Integration Server
<b>"Error while sending message: 500 Internal Server Error "</b>
It seems that integration server is not picking up the messages.
Can anyone help me on this?
thanks
AbhishekHi Abhishek,
Check whether the integration url is pointing to correct one something like http://host url:http port/sap/xi/engine?type=entry.
Please do refer the below blog:
/people/krishna.moorthyp/blog/2006/07/23/http-errors-in-xi
Regards,
Prasanthi. -
HOW TO: Relay/Send email from websites, Server Monitor in OS 10.5 Server
If you don't want to run your own mail server or configure DNS on your Xserve, but you still want your website or applications like Server Monitor to send email notifications; this is what you need to do:
Scenario: Mac OS 10.5.2 Leopard - Advanced Configuration - Setup is for strictly sending emails through SMTP, routed through your ISP or another provider. This is not for receiving emails.
-Open up Server Admin
If you have yet to add in a server to admin, you need to do so. Resource PDFs on setting up OS X Server are available at Apple http://www.apple.com/server/macosx/resources/ and there are video tutorials at http://movielibrary.lynda.com/html/modPage.asp?ID=373
-Click on your server, then choose the Settings button
-Then choose Services from the Tabs/Buttons below
-Select the Mail checkbox and then hit Save
-Now choose the newly added Mail service in the left pane, then click the Settings button up top
-Start with the Advanced tab. Under Security, un-check everything and don't use SSL unless you want to. You don't need to mess with the other sub-tabs here.
-Next choose the Logging Tab. Under SMTP log level, choose debug so you will be able to see what goes on in the log.
-Mailing List, Quotas and Filters tabs can go untouched. You can mess with them later if you want.
-Click the Relay tab. It is a good idea to only accept relays from your local machine. If you uncheck this, I believe it leaves you with an open relay that anybody can access.
-Now for the General Tab. Under Domain Name put anything you want. Any made up name and extension is fine.
Under Host Name, again put anything you want.
Un-check Enable POP, Un-check Enable IMAP - Basically un-check everything
Check or leave checked Enable SMTP
Now check Relay outgoing mail through host:
Then enter your hosts SMTP server. ex. smtpout.secureserver.net
Now check Authenticate to relay with user name: and enter your username and password
-Now hit the Save button
-Now we need to take a look at the main.cf file and add a few things
-If you aren't showing all files in Finder already, open up Terminal.app
Now type in: defaults write com.apple.Finder AppleShowAllFiles True
Hit enter
Now type in: killall Finder
Now Finder should reset and all files should be visible - To hide all files, do the same thing but type False
-Now open Macintosh HD and navigate to /private/etc/postfix/main.cf (Note: you won't be able to open and edit this in TextEdit. I recommend a program like TextWrangler http://www.barebones.com/products/textwrangler/download.shtml )
-Once you have main.cf open, all your settings should be together at the bottom of the doc. Scroll down. You will need to add in a few lines and verify all the settings are exactly as below (except of course your own names and SMTP server):
readme_directory = /usr/share/doc/postfix
mydomain_fallback = anything.anyting
messagesizelimit = 0
myhostname = anything.anything
mailbox_transport = cyrus
mydomain = anything.anything
mailboxsizelimit = 0
enableserveroptions = yes
inet_interfaces = all
relayhost = smtpout.secureserver.net
smtpsasl_passwordmaps = hash:/etc/postfix/sasl/passwd
smtpsasl_authenable = yes
smtpdsasl_authenable = no
smtpsasl_securityoptions =
smtpduse_pwserver = no
smtpdrecipientrestrictions = permitmynetworks,reject_unauthdestination,permit
smtpdpw_server_securityoptions = none
-Now save the main.cf document
-Now go back to Macintosh HD and navigate to /private/etc/postfix/sasl/passwd
Open passwd with TextWrangler or you editing app, and verify that your SMTP server, username and password are correct. It should look something like this:
smtpout.secureserver.net [email protected]:password
-This should be what you entered in Server Admin when you first started. If all is well, quit your editing app.
-Now, while you are still at /private/etc/postfix/sasl/passwd you need to edit permissions for passwd
You can chmod in Terminal.app or secondary click on passwd and "Get Info"
Click the lock and enter your password to unlock the settings
Next click the + button and add yourself and Admin
-Now you can close out of everything and go back to Server Admin
-Hit the Reload (twisty arrow) button at the bottom and once everything is reloaded, hit Start Mail
-Now type localhost in your browser to see if your website can send email. You can also open up other apps such as Server Monitor and do something to change the status to have it send an email.
-You can click on Mail in the Server Admin and then view the SMTP log. As long as emails are being sent and then removed from the queue, you are in good shape. If you are getting an SASL error or mechanism error, open up main.cf and verify your settings and/or check permissions on passwd fileDon't you need the Mail service running to have apps like Server Monitor send email notifications? - Also for hosted sites that use the sendmail function you need a service running to get the emails sent.
Really you are not hosting a Mail server. It is open, but there is no incoming and if you only accept SMTP relays from the local machine, there should be no issues.
Maybe you are looking for
-
How to trigger creation of collective orders
Hi, How to trigger the creation of Collective orders. regards
-
hello, i"ve found a great post from Aaron Woland about how to make/install/use Wildcard certificate. http://www.networkworld.com/community/blog/what-are-wildcard-certificates-and-how-do-i-use-them-ciscos-ise but there is something that was not answer
-
OS 10.5.6 install DVD won't work on my G4 running 10.4.11 - HELP!!
I recently purchased a retail copy of OS 10.5.6 and attempted to install it on my G4. The installer runs fine from the DVD but freezes when it gets to the initial "choose language" screen. Mouse and keyboard are completely unresponsive with mouse poi
-
SAP TM Display Partial Rate table Archive on UI
Hi , I have Archived Partial rate table by using Archive object /SCMTMS/RA as there is no Info structure for this Archive object create a custom one . Rate table records are getting archived propely but its not getting viewed in POWL/NWBC at Archive
-
Error In Import MIRO Cancellation
Dear All, I am facing error while doing Import MIRO in MR8M. Balace not equal to zero : debit......Credit .... Pls guide me for the above issue. Regards Gitesh