Authentication Failed using K2 SmartObjects as Data source

I have an issue with Visual Studio 2010 and the K2 Smart Objects Data source. I continue to get Authentication Failed: SEC_E_LOGON_DENIED. I log into a corporate domain and then VPN into another domain where the K2 database and SQL Server are located.
After looking at the Windows logs it is apparent that the credentials being used are the first ones(corporate domain) and not the ones that I specified when using the Data source option for my application. I specify the correct domain/userid, port number and
password. Anyone have any suggestions?

Hi BBVillarreal,
Since it is related to K2 Smart Objects, I’m afraid that it is really out of support range of VS IDE forum, but you can try ask this question at the forum about the K2 smart objects for better support.
I’m not very sure that the real forum, but I found some sites which are related to it, maybe you could get the correct forum for it.
http://www.k2underground.com/forums/t/15584.aspx
http://www.k2.com/
http://getk2.org/community/New-to-K2-Ask-here-first/132012-K2-Database-Structure
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Similar Messages

Using 2 web services data sources in the same report

I've been trying unsuccesffuly to use 2 web services data sources in a report. The main report accesses the first web service to get job summary information. 3 fields are are passed as parameters to a sub-report and used as parameters for the sub-report selection. Each report works fine independently, but when I link them together the subreport alway fails to retrieve data.

Please re-post if this is still an issue or purchase a case and have a dedicated support engineer work with you directly:
http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300?resid=-Z5tUwoHAiwAAA8@NLgAAAAS&rests=1254701640551

Can you use SQL as a data source for a project in the same way you can in Excel?

Excel allows you to create a data source that executes a SQL stored procedure, display that data as a table in a spreadsheet and have that data automatically refresh each time you open the spreadsheet. Is it possible to do the same thing in MS Project, displaying
the data from the stored procedure as a series of tasks?
Here's what I'm trying to do - I have a stored procedure that pulls task data meeting a specific criteria from all projects in Project Server. We're currently displaying this data as an Excel report. However, the data includes start dates and durations so
it would be nice to be able to display it as a Gantt Chart. I've played around with creating a Gantt chart in Excel and have been able to do a very basic one, but it doesn’t quite fit our needs.

No, You can not use sql as a data source for a project.
You have 3 options to achieve it:
1. You can create a Sharepoint list with desired column ,fill desired data in that list then you can create a MS project from Sharepoint List.
2. You can create a SSRS report in which you can display grantt chart Joe has given you that link.
3. You can write a macro in MPP which will take data from your excel. In excel you will fetch data from your stored procedure. write a schedule which will run every day to update your data or
create an excel report in which will update automatically and write macro in mpp which will fetch the data then publish it so that it would be available to team members.
kirtesh

Using XML as a Data Source

In http://download.oracle.com/docs/cd/E14571_01/bi.1111/e10540/datasource.htm#CHDBCAIJ it states you can use XML as your data source and mentions...
URLs can include repository or session variables, providing support for HTTP data sources that accept user IDs and passwords embedded in the URL. For example:
http://somewebserver/cgi.pl?userid=valueof(session_variable1)&password=valueof(session_variable2)
I'm trying to pass this:
http://somewebserver/cgi.pl?userid=valueof(NQ_SESSION.USER)
but when I try that I can see in my web server logs that the content of the userid variable is 'valueof(NQ_SESSION.USER)' so it's not passing the results to the web server, just the text. Any ideas what's going on? Is my syntax correct? Thanks!

Hey,
There are a few things to look at when using session and repository variables within the RPD.
One of the first documents you need to reference is the "What is the Syntax for Referencing Variable?" section within the OBI documentation. In addition look at this section on how to use variables in the RPD, http://download.oracle.com/docs/cd/E14571_01/bi.1111/e10540/variables.htm#BIEMG3104
Basically you are trying to use NQ_SESSION.USER which is the syntax for trying to show the user name is Presentation Services. Of course you can see this in your web server logs because that is the correct syntax for presentation services web tier but not the RPD where you define your XML Source.
You need to try either use VALUEOF("USER") or you are simply forgeting to put the syntax surrounded by single-quotes like, http://somewebserver/cgi.pl?userid='valueof(NQ_SESSION.USER)' to pull the system session variable into the XML URL as needed.
Try those options and let me know if that works.
Please mark this as the correct answer or helpful.
Cheers,
Christian
http://www.artofbi.com
Edited by: Christian Screen on May 8, 2011 10:32 AM

Failed to close connection for data source "EntityDataSource"

Hi All,
I have deployed some PowerView reports on SharePoint 2013.
I have open it on sharepoint, wait for 5 mins & then I try to change any filter then I am getting following error as
Failed to close connection for data source "EntityDataSource"
Error Text:
<detail>
<ErrorCode xmlns="http://www.microsoft.com/sql/reportingservices">rsErrorClosingConnection</ErrorCode>
<HttpStatus xmlns="http://www.microsoft.com/sql/reportingservices">400</HttpStatus>
<Message xmlns="http://www.microsoft.com/sql/reportingservices">Failed to close connection for data source 'EntityDataSource'.</Message>
<HelpLink xmlns="http://www.microsoft.com/sql/reportingservices">http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsErrorClosingConnection&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0</HelpLink>
<ProductName xmlns="http://www.microsoft.com/sql/reportingservices">Microsoft SQL Server Reporting Services</ProductName>
<ProductVersion xmlns="http://www.microsoft.com/sql/reportingservices">11.0.3128.0</ProductVersion>
<ProductLocaleId xmlns="http://www.microsoft.com/sql/reportingservices">1033</ProductLocaleId>
<OperatingSystem xmlns="http://www.microsoft.com/sql/reportingservices">OsIndependent</OperatingSystem>
<CountryLocaleId xmlns="http://www.microsoft.com/sql/reportingservices">1033</CountryLocaleId>
<MoreInformation xmlns="http://www.microsoft.com/sql/reportingservices">
<Source>Microsoft.ReportingServices.ProcessingCore</Source>
<Message msrs:ErrorCode="rsErrorClosingConnection" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsErrorClosingConnection&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">Failed to close connection for data source 'EntityDataSource'.</Message>
<MoreInformation><Source></Source><Message>For more information about this error navigate to the report server on the local server machine, or enable remote errors</Message></MoreInformation></MoreInformation><Warnings
xmlns="http://www.microsoft.com/sql/reportingservices" /></detail>
Is it because of Session Timeout?or may be something else
Thanks in advance.

Hi Rameshwar,
Pleaese help to collect SharePoint ULS Log related to this issue for further investigation, please see:
Configure and View SharePoint Log Files and Diagnostic Logging (PowerPivot for SharePoint):
http://technet.microsoft.com/en-us/library/ee210652.aspx
In addition, could you please elaborate this issue with more deail how this issue happened? Are you encountered this issue while you view the Power View report on SharePoint site?
Regards,
Elvis Long
TechNet Community Support

Omniportlet problems using web page as data source

When trying to set up an omniportlet using a web page as a data source
I get as far as defining the sectioning and scraping parts of the web clipping process.
When going on to the "filter" step of the process I always get an error message like:
Error
Failed to open specified URL. Check the following:
is the URL is active; is there a valid proxy setting or,
if HTTP authentication is required, check user name and password.
[http://oslap03.agra.int:7777/portalTools/webClipping/webData/omniPortlet/wcserver/jsp/show.jsp?_orawcs_providerId=39337338&_orawcs_portletId=1&_orawcs_p
ortletInstanceId=33731_OMNIPORTLET_39337338&_orawcs_userI
d=-&_orawcs_responseType=rowsetRow]
We are not using proxy servers for accessing external web pages in other cases
(so I wouldn't think we needed to now either), and this even happens for web
pages residing within our own network.
Any tips are much appreciated.

Please provide support for the above request.
It appears that Oracle 10g reports doesn't support Web Service as pluggable data source. Is this option is available in Oracle 11g Reports or Oracle Discoverer Or OBIEE?

Logon failed when connecting to XML data source over HTTP

I am trying to create a report using the standard report creation wizard:
1) new, standard report
2) create new connection
3) xml and web services
4) xml data source
When using the sample from the SAP site, it works fine:
http://resources.businessobjects.com/support/downloads/samples/cr/customer_db/customer.xml
I have an HTTP source that generates XML. I have a schema that describes this XML. If I save the XML to a local file it works fine as a data source with the schema. However, when I try to access the same data via HTTP, I get the following error:
Logon failed.
Details: Cannot open file
Server returned HTTP response code: 401 for URL: http://localhost:8004/report.xqy?Validate%20XML=0&Use%20WS-Security%20Config%20File=&WS-Security%20File%20Location
However, if I enter that URL in a browser it works fine. And even if I disable security on the HTTP source, it produces the same error.
Does the URL for the HTTP data source have to conform to some specific pattern? For example, must the URL end in .xml?
Kelly

Sorry Brian,
This is a public forum, if no one can help you do have the option to purchase a support case:
http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300?resid=-Z5tUwoHAiwAAA8@NLgAAAAS&rests=1254701640551
Thank you
Don

Problem when using MS Access as data source

I want to get the source data from MS Access Database and load the data into a Oracle Database by OWB.
I created a ODBC for the Access Database,and added the correlative informations in the files such as hs/admin/initmsaces.ora��network/admin/listener.ora��network/admin/tnsname.ora.
Then I created a new module under the "DataBase->Other->ODBC" in OWB,the schema I selected is "Undefine"��it is the only one selection��Then I created some mappings.All these steps are successful.
But when I was deploying the project,OWB reported a wrong: Talbe or View is not exist.
I want to know how can I resolve the problem.
Thanks!

I think we are having the same problem and (I think) set up everything as described in the note.
We are using an ODBC connection to an MS-Access database with OWB 9.2. We have successfully defined the data source to OWB, and imported 2 target tables, then mapped one of the tables to a staging table.
The mapping process validates correctly. From Deployment Manager, we register the source file location, which asks for a schema owner, username, and
password. We supply the value admin for each of these as Location Registration windows requires a value for each [no blanks allowed] and the registration is successful.
However, when we Generate/Deploy the mapping, the Generate succeeds, but deployment fails with the error PL/SQL: ORA-00942: table or view does not exist. Looking at the generated code, we see that the SELECT statement in the generated mapping code specifies the source table as owner.table_name@db_link.
From SQL*Plus, the table_name@db_link can be described correctly. Trying to describe owner.table_name@db_link fails with object does not exist error, which is similar to the OWB table does not exist error.
MS-Access has no concept of schema-owner. Is there a way to generate the Mapping without specifying the schema-owner ??.

How to connect crystal report 2013 using sap business one data source

hello Professionals .
when i try to use data source sap b1 in crystal report 2011 or 2013 i got no list in company database,
when i try to write it manual i got error "Connection failed".
I tried to connect OLE DB and ODBC all work fine with me.
i attached some snapshots .
Any Advice Please ?

Hi Mohamed,
Please check below link.
SAP Crystal Reports 2011/2013 doesn't show Company Data Base
SAP Business One Data Source in Crystal
Crystal Reports - How To - Connecting to your SAP Database - YouTube
Migrating Crystal Reports of SAP Business One from SQL Server to SAP HANA
Hope this helps
Regards::::
Atul Chakraborty

Failed to fetch express pluggable data source

Dear Friends,
I am encountering the following the error while running the reports.
REP-4102: Failed to fetch pluggable data source.
java.lang.NumberFormatException: 75,000000
I am using an Express Query in this case.
The same report runs perfectly when connected to the NT server that has the reports server,Http server and the rdf file.The db that the reports uses is on the SOLARIS server.
But when I use the reports server,http server and the rdf file avaiable to me on the SOLARIS server with the db also now on the same machine it does not run and gives the error.
What could be the problem ?
Just to add more clarity below is the URL which I use to display the report
NT URL(This works perfectly)
http://sa560:7778/reports/rwservlet?server=rep_sa560&report=c:\DWHReports\Man_Days_Spent.rdf&express_server="server=ora_ro_tcp:172.20.128.199/sl=-2/st=1/ct=0/st=1/"&destype=cache&desformat=htmlcss&OESHOST=172.20.128.199&SUSR_NAME='oraexp'&PASSWORD='test'
SOLARIS URL(This does not work and gives the error)
http://172.20.128.199:7778/reports/rwservlet?server=rep_gosisvr&report=Man_Days_Spent.rdf&express_server="server=ora_ro_tcp:172.20.128.199/sl=-2/st=1/ct=0/st=1/"&destype=cache&desformat=htmlcss&OESHOST=172.20.128.199&USR_NAME='oraexp'&PASSWORD='test'
Regds,
Ramakrishnan L

Dear Oracle Reports Team,
Can you please help me out ???
Need your help in this regard urgently.
Best Regards,
Ramakrishnan L
Dear Friends,
I am encountering the following the error while running the reports.
REP-4102: Failed to fetch pluggable data source.
java.lang.NumberFormatException: 75,000000
I am using an Express Query in this case.
The same report runs perfectly when connected to the NT server that has the reports server,Http server and the rdf file.The db that the reports uses is on the SOLARIS server.
But when I use the reports server,http server and the rdf file avaiable to me on the SOLARIS server with the db also now on the same machine it does not run and gives the error.
What could be the problem ?
Just to add more clarity below is the URL which I use to display the report
NT URL(This works perfectly)
http://sa560:7778/reports/rwservlet?server=rep_sa560&report=c:\DWHReports\Man_Days_Spent.rdf&express_server="server=ora_ro_tcp:172.20.128.199/sl=-2/st=1/ct=0/st=1/"&destype=cache&desformat=htmlcss&OESHOST=172.20.128.199&SUSR_NAME='oraexp'&PASSWORD='test'
SOLARIS URL(This does not work and gives the error)
http://172.20.128.199:7778/reports/rwservlet?server=rep_gosisvr&report=Man_Days_Spent.rdf&express_server="server=ora_ro_tcp:172.20.128.199/sl=-2/st=1/ct=0/st=1/"&destype=cache&desformat=htmlcss&OESHOST=172.20.128.199&USR_NAME='oraexp'&PASSWORD='test'
Regds,
Ramakrishnan L

Failed to acquire DAS with data sources that match the specified OCE

Please help, Thank you all.
We are migrating Oracle databases from Windows to Linux servers. Currently, I have no problem to use my desktop Hyperion Intelligence Designer 8.5 with new oce file to connect to Linux. However, I published the same oce file to Hyperion Performance Suite 8.5 then I got “Sever Error [2018]: Failed to acquire Data Access Service with data sources that match the specified OCE”.
I launched Service Configurator, in the “Local Service Configurator - DAS1_host”, the “Database JDBC URL is point to Linux server. Also, I added ODBC connection to Oracle database on Linux in the “Properties of Data Access Service: DAS1_host’s Data Source”. Database of JDBC URL in BI1_host, AZ1_host, PUB1_host, SM1_host, LS1_host, UT1_host, BPS1_host, AN1_host are also point to Linux server.
The “Remote Service Configurator” has ES1_host’s” Storage” with JDBC URL point to Linux server. The same for RM1_host’s and NS1_host’s “Storage” with JDBC URL point to Linux server.
Is there some missing configuration on the server? Thank you in advance.

You should login to my oracle support to look into this ID.
This is the solution mentioned
Solution
1) In the .profile file, you will find the definition of the LD_LIBRARY_PATH variable. However, the path to 64 bit libraries is probably appended before the path to the 32 bit libraries(%ORACLE_HOME%/lib32). Therefore, please reverse the order in the definition so that the 32 bit libraries get loaded before the 64 bit libraries.
Then, restart all services.
2) Oracle 9.2 was the first Oracle release which defaults to using the 64 bit libraries in the 'lib' directory and the 32-bit libraries that we need are in the 'lib32' directory.
Therefore, please have the%ORACLE_HOME%/lib32 placed in front of the LD_LIBRARY_PATH environment variable definition.Then, restart all services.
3) Please check that users have read and write access to the files located in the %ORACLE_HOME%/lib32 folder.
4) Check the permissions of the libclntsh.a file(located in the %ORACLE_HOME%/lib32 folder) are set to rwxr-xr-x
5) Recreate the OCE connection in DAS and restart DAS in CMC.
6) Restart all the BIPlus Services and process the query.

Report using excel sheet as data source not working when deployed to production.

I have a set of SSRS reports that use an excel sheet as a datasource.
Now when I preview the reports or run them in the Visual Studio IDE on my local machine i.e
the development machine, the reports run fine & display all correct results.
However, when we deploy the reports to the Production machine which is on a separate server,
the following error message is displayed :
"The current action cannot be completed. The user data source credentials do not meet the requirements to run this report. Either the user data source credentials are not stored in the report server database, or the user data source is configured not to
require credentials but the unattended execution account is not specified. (rsInvalidDataSourceCredentialSetting)"
I've copy pasted the connection string used for connecting to the excel file as reference :
Provider=Microsoft.ACE.OLEDB.12.0;Data Source=C:\MyFolder\CurrentFile.xlsx;Extended Properties="Excel 12.0;HDR=Yes;";
The excel file has also been uploaded to the machine housing the reporting server (i.e to C:\MyFolder location)

Hi Aaakar,
From the error message, please try to change the setting of Credential type for the data source on report manager as follows:
Go to the Data Sources properties page.
For the Connect Using option, select Credentials stored securely in the report server.
In User Name and Password, type credentials that can be used to access the database. If you are using SQL Server as the data source, the user name must be valid for both logging on to the server and for accessing the database that contains the data for
the report.
If the user name and password are credentials for a Windows account, select Use as Windows Credentials.
If you want the report server to pass the credentials of the user accessing the report to the server hosting the external data source, click Windows Integrated Security. In this case, the user is not prompted to type a user name or password.
For more details about Configure Data Source Properties, please see:
http://technet.microsoft.com/en-us/library/ms155882.aspx
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Using Web Service as Data source (Pluggable Data Source) in Oracle Reports

Anyone using Webservice as a pluggable data source in oracle 10g reports.(Report builder version:10.1.2.0.2)? We need to be able to use web service as one of the data source to create reports.Tried the following and ran into issues:
Imported the wspds.jar fle from oracle plugin exchage. When tried using it received the following error in oracle reports trace file.
04/26 22:27:22 java.lang.NoSuchMethodError: oracle.xml.parser.schema.XSDBuilder.build([Loracle/xml/parser/v2/XMLDocument;Ljava/net/URL;)Ljava/lang/Object;
By troubleshooting issue found out that xmlparserv2.jar in 10g is newer than xmlparserv2.jar in 9i. wspds.jar is using xmlparserv2.jar in 9i as it was developed and tested for 9i only. Believe there is no newer wspds.jar file developed specifically for 10g?
Is there a better/standard solution to use webservice as data source in oracle 10g reports? Does later version of oracle reports supports webservice as a data source without any additional plugins? Any suggestion would be helpful.

Please provide support for the above request.
It appears that Oracle 10g reports doesn't support Web Service as pluggable data source. Is this option is available in Oracle 11g Reports or Oracle Discoverer Or OBIEE?

Report that uses web services as data source, prompts for database logon

I have a crystal report that uses web services as a data source. When I deploy the report to Infoview it prompts me for a database username and password. Since I am not using a database it should not prompt me for these. I tried various options in the CMC->database settings for this report but it still prompts me for the database logon info or tells me that the database logon information is incorrect.
The report work fine in the Crystal Reports Designer.
Does anyone know how I can prevent this report from prompting me for the database logon info ?
Thanks,

What options have you tried in the CMC?
Have you tried running the report in Crystal Reports installed directly on the Enterprise machine?

'authentication failed' using Microsoft ADSI version LDAP server

Hi All,
Now days i am facing some problem in authentication (i am using microsoft ADSI version LDAP Server) but am not able to authenticate the LDAP users.
I have configured my LDAP server in the same manner as u mentioned in this blog.
when I am trying to authenticate the user from the RPD itself i m gettig the following error:
“authentication failed” (actually i forgot the exact message but it mean is same as i referred here)
though i am able authenticate the bind user ( which i used to configure the LDAP Server)
Please help me in this as i already wasted a lot of time in doing R&D to make it work..
I have an urgent requirement to do the same..
Your help will highly appreciated…
thanks in advance
PS: I have checked the 'ADSI' box in advance tab:

Hi,
Please have a look at the below link:
Unknown certificate error when testing LDAP SSL connection
Not sure whether it will help you. But have a look at it.
Regards,
Jithin

Authentication Failed using K2 SmartObjects as Data source

Similar Messages

Maybe you are looking for