Authenticator not called?

I'm trying to retrieve a page from a web site that requires authentication from
within a servlet. I set up a simple Authenticator and did the standard setDefault()
.. but the getPasswordAuthentication() method never gets invoked ??? Is WLS
overriding this somehow? How does one do this? Looks like several folks have
run into this, but I don't see any solution posted.
Using WLS 8.1 sp2.
TIA,
Rick

Have you tested the URL address which you try to access needs authentication or the resource exists on the internet?
1- Do a manual login using your browser if it works then try the automated one ( HTTPUtils one)
2- if the HTTPUtils one does not work, then it is possible that the Web server (or surrounding systems) have been configured to disallow certain patterns of HTTP traffic. In other words, HTTP communication from a well-known Web browser is allowed, but automated communication from other systems( your HTTPUtils) is rejected with an 401 error code. This is unusual, but may indicate a very defensive security policy around your Web server.
3- The link does or the username or/and password is/are incorrect
You code seems to implement the right way to apply authentication. Let me know your thoughts
Regards,
Alan Mehio
London,UK

Similar Messages

Web service handler could not called in client web service

Hi All,
I have two web service ServiceA & ServiceB and both implemented in weblogic.
The ServiceA is SSL enable and protocol is https which is not published by me.
The ServieB is my web service(wls8.1) and act as client for ServiceA.
My problem is when i hit my service, its not able set the handler when it call ServiceA but it is invoking the service and giving application exception like authentication error.
My service file:
import java.util.ArrayList;
import java.util.HashMap;
import java.util.Iterator;
import java.util.List;
import java.util.Map;
import javax.xml.namespace.QName;
import javax.xml.rpc.handler.HandlerInfo;
import javax.xml.rpc.handler.HandlerRegistry;
import javax.xml.rpc.handler.soap.SOAPMessageContext;
import weblogic.webservice.client.SSLAdapterFactory;
import weblogic.webservice.client.WLSSLAdapter;
public class HelloService {
String wsdl = "https://188.122.123.23/RemoetService?WSDL";
static {
SSLAdapterFactory factory = SSLAdapterFactory.getDefaultFactory();
WLSSLAdapter adapter = (WLSSLAdapter) factory.getSSLAdapter();
adapter.setTrustedCertificatesFile("D:\\lib\\certs
cacerts");
factory.setDefaultAdapter(adapter);
System.setProperty("weblogic.xml.encryption.verbose","true");
System.setProperty("weblogic.xml.signature.verbose","true");
System.setProperty("weblogic.webservice.verbose","true");
public String sayHello(String user) {
RemoteService_Impl service = new RemoteService_Impl(wsdl);
RemotePortType port = service.getRemoteServicePort1();
String namespace = service.getServiceName()
.getNamespaceURI();
QName portName = new QName(namespace,
"RemoteServicePortType");
HandlerRegistry reg = service.getHandlerRegistry();
List handlerList = new ArrayList();
Map map = new HashMap();
map.put("Username", "user1");
map.put("Password", "pwd1");
HandlerInfo info = new HandlerInfo();
info.setHandlerClass(WSClientHandler .class);
info.setHandlerConfig(map);
handlerList.add(info);
reg.setHandlerChain(portName,(List)handlerList);
RemoteServiceResponse = port.callMe(name);
My Handler file:
package com.test;
import java.util.Map;
import javax.xml.namespace.QName;
import javax.xml.rpc.handler.Handler;
import javax.xml.rpc.handler.HandlerInfo;
import javax.xml.rpc.handler.MessageContext;
import javax.xml.rpc.handler.soap.SOAPMessageContext;
import javax.xml.soap.Name;
import javax.xml.soap.SOAPElement;
import javax.xml.soap.SOAPEnvelope;
import javax.xml.soap.SOAPException;
import javax.xml.soap.SOAPHeader;
import javax.xml.soap.SOAPHeaderElement;
public class WSClientHandler implements Handler {
private HandlerInfo handlerInfo;
public WSClientAuthenticateHandler(){}
public void init(HandlerInfo hi) {
System.out.println("Handler init");
handlerInfo = hi;
public void destroy() {
System.out.println("Handler destroy method called");
handlerInfo = null;
public QName[] getHeaders() {
System.out.println("Handler Header method called");
try {
Map map = handlerInfo.getHandlerConfig();
QName[] headers = handlerInfo.getHeaders();
System.out.println(" Config :"+map);
for(int i=0;i<headers.length;i++) {
System.out.println(headers.getLocalPart()+" "+
headers.toString()+" "+headers.getNamespaceURI());
}catch(Exception e) {
e.printStackTrace();
return handlerInfo.getHeaders();
public boolean handleRequest(MessageContext mc) {
SOAPMessageContext smc = (SOAPMessageContext) mc;
System.out.println("Calling handler class.....................");
try {
SOAPEnvelope se = smc.getMessage().getSOAPPart().getEnvelope();
System.out.println("Calling handler class.....................");
SOAPHeader soapHeader = se.getHeader();
Name headerName = se.createName("Security","wsse","http://schemas.xmlsoap.org/ws/2002/07/secext");
SOAPHeaderElement headerElement = soapHeader.addHeaderElement(headerName);
SOAPElement element = headerElement.addChildElement(se.createName("UsernameToken", "wsse", "http://schemas.xmlsoap.org/ws/2002/07/secext"));
element.addChildElement(se.createName("Username", "wsse","http://schemas.xmlsoap.org/ws/2002/07/secext")).addTextNode("testuser");
element.addChildElement(se.createName("Password", "wsse","http://schemas.xmlsoap.org/ws/2002/07/secext")).addTextNode("testpwd");
System.out.println("Calling handler class.....................");
System.out.println("** Request: \n "se.toString()"\n");
}catch(SOAPException e) {
e.printStackTrace();
return true;
/** * Specifies that the SOAP response message be logged to a
* log file before the
* * message is sent back to the client application
* that invoked the Web service.
public boolean handleResponse(MessageContext mc) {
System.out.println("Handler Response method called");
SOAPMessageContext messageContext = (SOAPMessageContext) mc;
System.out.println("** Response: \n"messageContext.getMessage().toString()"\n");
return true;
/** * Specifies that a message be logged to the log file if a SOAP fault is
* * thrown by the Handler instance.
public boolean handleFault(MessageContext mc) {
SOAPMessageContext messageContext = (SOAPMessageContext) mc;
System.out.println("** Fault: \n"messageContext.getMessage().toString()"\n");
return true;
Please need help here.
Thanks in Advance,
pps

I have tested static client calling using handler simple above service and found the issues.
QName portName = new QName(namespace,
"*RemoteServicePortType*");
The above line code has created the issues,becuase in wsdl file ( given similar wsdl file).
<?xml version="1.0"; encoding="UTF-8"?>
<definitions name="HelloService"
targetNamespace="http://www.ecerami.com/wsdl/HelloService.wsdl"
xmlns="http://schemas.xmlsoap.org/wsdl/"
xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"
xmlns:tns="http://www.ecerami.com/wsdl/HelloService.wsdl"
xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<message name="SayHelloRequest">
<part name="firstName" type="xsd:string"/>
</message>
<message name="SayHelloResponse">
<part name="greeting" type="xsd:string"/>
</message>
*<portType name="RemoteServicePortType">*
<operation name="sayHello">
<input message="tns:SayHelloRequest"/>
<output message="tns:SayHelloResponse"/>
</operation>
</portType>
<binding name="Hello_Binding" type="tns:*RemoteServicePortType*">
<soap:binding style="rpc"
transport="http://schemas.xmlsoap.org/soap/http"/>
<operation name="sayHello">
<soap:operation soapAction="sayHello"/>
<input>
<soap:body
encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"
namespace="urn:examples:helloservice"
use="encoded"/>
</input>
<output>
<soap:body
encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"
namespace="urn:examples:helloservice"
use="encoded"/>
</output>
</operation>
</binding>
<service name="Hello_Service">
<port binding="tns:Hello_Binding" name="*RemoteServicePortType1*">
<soap:address
location="http://host1:8080/soap/servlet/rpcrouter"/>
</port>
<port binding="tns:Hello_Binding" name="*RemoteServicePortType2*">
<soap:address
location="http://host2:8080/soap/servlet/rpcrouter"/>
</port>
<port binding="tns:Hello_Binding" name="*RemoteServicePortType3*">
<soap:address
location="http://host3:8080/soap/servlet/rpcrouter"/>
</port>
<port binding="tns:Hello_Binding" name="*RemoteServicePortType4*">
<soap:address
location="http://host4:8080/soap/servlet/rpcrouter"/>
</port>
</service>
</definitions>
From the above WSDL, I have four port name (port binding="tns:Hello_Binding" name="*RemoteServicePortType1*) which is not matching with PortType (portType name="*RemoteServicePortType*")
even i have iterated from getPorts() method and used to invoke the service.But handler was not calling when i invoke.
Please guide me here how i specify correct portname which can call Handler class also.
Thanks in advance,
pps

FillClaimsForEntity not called in my custom claim provider

Hi,
I have created a custom claim provider in SharePoint 2013 in order to augment claims with some custom values. It's mostly boilerplate code - nothing special. After deploying and enabling a corresponding farm feature I noticed that the FillClaimsForEntity
method is not called at all. Moreover, other two methods required for augmentation (FillClaimValueTypes and FillClaimTypes) are called only once - when the feature is activated. From my understanding all three methods should be called every time a user logs
in to SharePoint. I'm using integrated Windows authentication with NTLM.
This is abbreviated code showing only important parts:
public class MyClaimProvider : SPClaimProvider
protected const string MyClaimType = "http://www.mywebsite.ca/identity/claims/parrot";
protected const string StringTypeClaim = "http://www.w3.org/2001/XMLSchema#string";
protected override void FillClaimTypes(List<string> claimTypes)
if (claimTypes == null)
throw new ArgumentNullException("claimTypes");
// add our claim types
claimTypes.Add(MyClaimType);
protected override void FillClaimValueTypes(List<string> claimValueTypes)
if (claimValueTypes == null)
throw new ArgumentNullException("claimValueTypes");
// add our claim value type
claimValueTypes.Add(StringTypeClaim);
protected override void FillClaimsForEntity(Uri context, SPClaim entity, List<SPClaim> claims)
if (entity == null)
throw new ArgumentNullException("entity");
if (claims == null)
throw new ArgumentNullException("claims");
claims.Add(CreateClaim(MyClaimType, "kakadu", StringTypeClaim));
public override bool SupportsEntityInformation
get { return true; }
// ... the rest of code goes here
and this is my feature code:
public class MyClaimProviderRegistrationEventReceiver : SPClaimProviderFeatureReceiver
public override string ClaimProviderAssembly
get { return this.GetType().Assembly.FullName; }
public override string ClaimProviderType
get { return typeof(MyClaimProvider).FullName; }
public override string ClaimProviderDisplayName
get { return "MyClaimProvider"; }
public override string ClaimProviderDescription
get { return "MyClaimProvider desc"; }
public override void FeatureActivated(Microsoft.SharePoint.SPFeatureReceiverProperties properties)
base.FeatureActivated(properties);
var cpm = SPClaimProviderManager.Local;
foreach (var cp in cpm.ClaimProviders)
if (cp.ClaimProviderType == typeof(MyClaimProvider))
cp.IsUsedByDefault = true;
cp.IsEnabled = true;
cpm.Update();
break;
Does anybody know why the methods are not called when a user accesses SharePoint?
Thanks,
Leszek
Wiki: wbswiki.com
Website: www.wisenheimerbrainstorm.com

Hi,
The following articles would be helpful:
How often will FillClaimsForEntity in my Custom Claims Provider be called?
http://blogs.msdn.com/b/brporter/archive/2010/11/30/how-often-will-fillclaimsforentity-in-my-custom-claims-provider-be-called.aspx
Checklist for Issues with Custom Claims Providers in SharePoint 2010 and 2013
http://blogs.technet.com/b/speschka/archive/2013/05/15/checklist-for-issues-with-custom-claims-providers-in-sharepoint-2010-and-2013.aspx
SharePoint Custom Claims Provider
http://blog.podrezo.com/sharepoint-custom-claims-provider/
Best Regards
Dennis Guo
TechNet Community Support

Basic authentication when calling a web service

I am attempting to call a web service using ActionScript. The
web service provider requires that I use HTTP Basic Authentication
to communicate my SOAP requests. I cannot seem to get this done in
ActionScript. If I instantiate a WebService object and call its
SetCredentials method, I get an error "Authentication not supported
on DirectHTTPChannel (no proxy)". I have the WebService object's
useProxy property set to true. HELP!

I know this is five years later on this forum but there's no solution here or on any other forum. So after two day's of hammering this out I was able to produce a workable solution. Create a new user account for testing.
Wu_Xiao's explanation of the issue was dead on. The WebService does a GET then a POST and for the GET we are unable to supply the Authorization in the header and this is why we get the popup. The POST has the Authorization but it already to late.
Take these actions
1 Create a new user on the machine with the web services. Start with a simple name and password (text only) I had issues with different users. Start clean and simple.
2 Copy your web services a second usable service. You'll see in my example below i have Ive copied ServicesSECURE/Services1.asmx?WSDL to ServicesDEFINITION/Services1.asmx?WSDL
3 Remove all of the code inside of your services making the new set of service like a definition service. Make sure all of the inputs and outputs are the same. ServicesDEFINITION will have no coding and empty returns.
Example
[WebMethod]
        public String CountUsers(string group)
            return "";
4 Implement the code below. Call the init() right away to instantiate the web service and wait until it loads to use any of the services. I use a button event to test.
private var testws:WebService = new WebService;
private function init():void
testws.wsdl="http://test.com/ServicesDEFINITION/Services1.asmx?WSDL";
var encoder:Base64Encoder= new Base64Encoder();
encoder.insertNewLines = false; // see below for why you need to do this
encoder.encode("USERNAME:PASSWORD");
testws.httpHeaders = {Authorization:" Basic " + encoder.toString()};
testws.loadWSDL();
testws.addEventListener("load", wsdlLoadHandler);
protected function test_clickHandler(event:MouseEvent):void
testws["CountUsers"].addEventListener(mx.rpc.events.FaultEvent.FAULT,testFaultHandler);
testws["CountUsers"].addEventListener(mx.rpc.events.ResultEvent.RESULT,testResultHandler) ;
testws.endpointURI="http://test.com/ServicesSECURE/Services1.asmx?WSDL";
testws.getOperation("CountUsers").send("Test");
protected function wsdlLoadHandler (event:LoadEvent) : void
//the service has to load before using the getOperation function
//you could try using mx.core.UIComponent.callLater from
//this listener and call the gettestws.getOperation("Co....
So you'll see that the ServicesDEFINITION (GET) is called and grabs the definition of the Service1 service but this unsecured services is useless because we've removed all of the code. After the definition GET is called we can change the end point using endpointURI and perform the POST against our secure ServicesSECURE.

"start" not called for Custom Login Command

Hello,
I'm working on getting acegi to handle the authentication instead of the app server. So I extended AppServerLoginCommand and overrode doAuthenticate and "start". But "start" never seems to get called; neither during initialization of the server nor before or after doAuthenticate is called. Note that doAuthenticate *does* get called, so BlazeDS does know about my custom command. I tried implementing just LoginCommand instead of extending AppServerLoginCommand but the same result.
The reason I need start is because I want to grab the WebApplicationContext and from there get the authenticationManager bean so that doAuthentication can do its job.
I noticed that "stop" never gets called either.
Any pointers or clues would be appreciated.
/r

I looked through the source code and as best I can tell "start" never gets called for LoginCommand. This is, by no means, a certainty since I only partially followed the stack trace and looked at the source near the place where the LoginCommand gets created, so there may be another point in the lifecycle where start gets called. But anyway, if you look at the file at:
http://opensource.adobe.com/svn/opensource/blazeds/trunk/modules/core/src/java/flex/messag ing/config/MessagingConfiguration.java
near
private LoginCommand initLoginCommand(LoginCommandSettings loginCommandSettings)
you'll notice that the LoginCommand gets created but start is not called.

How to log in with my old Apple account? I forgot my pass and I did change my apple ID before canceling first?? I am from Croatia so did folow al the discussion and the to resolve the problem but no luck. Can not call from Croatia the Apple help desk

How to log in with my old Apple account? I forgot my pass and I did change my apple ID before canceling first?? I am from Croatia so did folow al the discussion and the to resolve the problem but no luck. Can not call from Croatia the Apple help desk.i did try all the options but I can not find the phone number to call from Croatia,
I can not change my Apple ID to the old mail (not possible!)
The old mail don't accept the new password..
I can not delete the Icloud all the time asking my the password of the old mail!
I realy need help

You can not merge accounts.
Apps are tied to the Apple ID used to download them, you can not transfer them.

I am recieving calls from a solicitor. Show up as no caller Id. I want to block all calls that do not show caller Id. Can I do that? I am on the do not call list

How do I block all in coming calls that do not show on my caller Id. Phone says "no caller id" This particular call is from a place selling septic tank cleaner. They leave an automated voice mail. They are calling me over and over. I am on the national do not call list but that's no help. Because the caller id doesn't show anything I can't even report them.
I remember in the past calling a number and before my call would go thru I would have to enter my phone number so the party I was calling knew who was calling them. That is what I want to do. I want to block all calls from "no caller id" "number unavailable" Just FYI my phone is an IPHONE 5 and I am on Verizon.
Any help would be appreciated.
Thanks

itbitybob, good day!
Thank you for taking the time to reach out to us today. I know how frustrating it can be getting phone calls from "no caller id" numbers. We do have an option that is called Family Base that will allow you to block unknown numbers, private numbers, or caller id. This link will provide you with the full details of this option. http://vz.to/1gIklla I hope this is able to answer your question. If you have further questions please feel free to reach back out to us at any time.
KevinR_VZW
Please follow us on Twitter @VZWSupport

Intercompany stock transfer but BUV not calling

HI expert,
we are doing cross company stock transfer. we have made sto, delivery, post goods issue, and goods reciept in receving site.
but problem is that during PGI, inter company clear accounting entries is not calling. ie transaction key 'BUV' is not caaling during PGI.
how we can call automatic intercompany clearing during PGI.
Regards,
Santosh

solved.
it will call when you will use document type UB for interconmany.

When I press on a land line number, the phone does not call the number, but comes up with a screen to send a text to it. How do I get my phone to default to phoneing a landline?

When I press on a land line number, the phone does not call the number, but comes up with a screen to send a text to it. How do I get my phone to default to phoneing a landline? When I press a mobile number in contacts, the phone automatically phones the number. I do not mind this as I hardly ever send texts, but I would like to have the option of what to do. This seems such an obvious issue but I can not solve it even with much web searching. Thanks!

I can't delete my question, so I'll just say that you press on the type of number written in the box to the left of the box you typye the number into. Dumb or what?

My iphone is gray or black it is functioning but you can not see the screen so I can not call or text or anything

My iphone is gray or black it is functioning but you can not see the screen so I can not call or text or anything, I have a child that is very ill and I have to have access to a phone at all times can someone help me? It happened one other time when I plugged it in to my to listen to music. I know it is working it said something on voice control. I tried the press the circle button and the top button but the screen only turned white?

Try the following:
- A reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory settings/new iPod.
If you still have the problem that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order

How to call or not call a Trigger in same table based on condition?

Hi
How to call or not call a Trigger in below situations..
If a table contains a record of same value i.e,
[i[u]]ID
1
1
3
In above ID 1 is repeated for two times.
In this situations i don't want to call a trigger..
But, the value ID is for 3, now i want to fire a trigger.
Based on this i want to delete in another table.
How can I check it?
Thanks

Thanks for ur reply..
The below is my scnario..
I am having two table
employee
Id empcol
101 111
101 222
102 444
Department
id deptcol
101 457
101 678
102 543
The above is my table structure no one column is PK, so i m not able create FK.
When I am deleting from employee where id =101 and empcol=111,
the above record is deleted.
At present I am using After Update Trigger..
So trigger is called and delete the id 101 in Department table.
In my scenario i can't delete a record in Department table
bcoz i am having id morethan 101 in employee table.
If employee table contains one ID like 102 the Trigger should works.
How can I check the condition After delete on employee table it contains morethan same employee id?
The below is my Trigger..
CREATE OR REPLACE TRIGGER CALL_TRIGGER
AFTER DELETE ON Employee
FOR EACH ROW
DECLARE
count_id pls_integer;
BEGIN
SELECT COUNT(*) INTO count_id from Employee WHERE ID <>:new.ID;
IF( count_id >1) THEN
DELETE FROM Depratment where ID=:old.ID;
END IF;
END;
I am geting an error ORA-04091 table is mutuating, trigger cannot seen it.
I had tried with package and package body also.. But no luck.
Thanks

Dynamic Configuration is not called in End to end processing

Hi,
I am working on scenario Proxy to File. From the source side, they are sending the target file name in the proxy. So for that we are implementing the dynamic configuration.When the proxy is triggered from ECC, the dynamic conf is not called. I am not able to see the Dynamic configuration in SXMB_MONI. But when i send the same payload through RWB, i m able to see the Dynamic conf in SXMB_MIONI and the target file is getting generated.
Please suggest the solution for this.
Thanks,
Soumya.

Hi,
I feel the dynamic configuration should be accessed at the runtime and not generated. We have had similar scenarios where we built the file name at runtime accessing the payload.
Try using the below UDF for a dummy field on target side and the field carrying file name on source side..
public String setDynamicFileName(String Key, String Value, Container container)throws StreamTransformationException{
DynamicConfiguration conf = (DynamicConfiguration) container
    .getTransformationParameters()
    .get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create(
    u201Chttp://sap.com/xi/XI/System/Fileu201D,
    u201CFileNameu201D);
conf.put(key,value);
return("");
This should work as long as you are passing a value in source field.
Thanks
Amit

Decode function not called for a custom component

I know this problem happened in the past - in the EA2, EA4 and I believe the beta version as well, but does anyone know if it has been solved for the release ?
In short - I'm working with the release, created a menuBar component and the decode method in the renderer is not called after I submit the page. In the past, there were rumors that this happened due to relative paths in the JSP (for js files, images, etc.).
Does anyone else have this problem ? or better , know how to solve it ?
Thanx,
Netta.

It's not that simple - The component is getting rendered, all the encode methods are called and the decode is called also , but only the first time the form is submitted.
I added this custom component to the guessNumber application, and I have a menuBar in the greeting.jsp that leads to the response.jsp and vice versa. it looks like this in the greeting.jsp page -

<t:MenuBar id="bar1" styleClass="myClass" >
<t:Menu id="menu1" name="menu1">
<t:Menu id="menu2" name="menu2">
<t:MenuItem id="item2_1" name="item2_1" action="/mytest/guess/response.jsp"/>
<t:MenuItem id="item2_2" name="item2_2" action="http://www.msn.com"/>
<t:Menu id="menu3" name="menu3">
<t:MenuItem id="item3_1" name="item3_1x" action="http://www.msn.com"/>
</t:Menu>
</t:Menu>
</t:Menu>
<t:MenuItem id="item3" name="item3" action="http://www.cnn.com"/>
</t:MenuBar>

In the response it looks like this -

<t:MenuBar id="bar2" styleClass="myClass" >
<t:MenuItem id="item3" name="item3" action="/mytest/guess/greeting.jsp"/>
</t:MenuBar>

and every time a menuItem is clicked on, the JS calls submit form.
Since the menus are rendered, I assume there's nothing wrong with the rendererType and any other renderer problem. Since the decode is called only once, I assume the right form is being submitted.
So, what can cause it to stop calling the decode ???
Could it be that becase I go directly to the page and not through the navigation rules ( I call window.open directly from the JS), it creates a problem ??
Please help, I've been wasting so much time on this !
Netta.

ISE 1.2.1.198 patch 5 - Operations Authentications not loading or displaying

Is anyone else having an issue with getting Authentications to display under operations? We were running 1.2.0.899 and started to run into a couple bugs so we upgraded to 1.2.1.198. Ever since then the Operations - Authentications have not been working right. I may occasionally see and actual authentication but not as many as I should. Most of the messages I saw yesterday pertained to radius processes already in progress from endpoint which was my wireless controller. Today I just get a loading data message at the bottom of the screen. It does not seem to be affecting system operation as users are still properly authenticating but I am unable to monitor the process or troubleshoot a users if they were to have an issue. We are on the edge of moving this into full production but really cannot until I get this resolved.
I have a case open with tac and their comment was that the issue of authentications not displaying was fixed in 1.2.1 and not sure what may be happening. We went ahead and applied patch 5 just in case there was something else going on. That did not fix things and it now seens to be getting worse.
I just wanted to see if anyone else had seen this and could possible shed some light on a resolution.
I am running a cluster containing the following. Primary admin on a VM - two policy Services servers both on VMs - secondary admin on retired ACS 2111 appliance. All three VMs are on the same physical server. Memory utilization on the admin server is just under 50% with the Policy servers both in the 30% range. I do have one policy server that is showing authentications in the 10-12ms latency but do not think that should affect anything. The ISE cluster is also tied into our 5508 wireless controller for support of the wireless networks. I have two SSIDs in production here at corporate and trying to figure out FlexConnect for the remote locations so we can centralize everything.
Brent

TAC recommendation was to install patch 5 which should include patch 4 plus other things. They took logs from my servers and asked to give them a day or so to look at the issue. Today is day three with no update.
I am going to reboot all the servers in the cluster tonight. I do not have console access to the VMs so am hoping that I can reload from the CLI and accomplish the same thing rather than just reload the services.
I tried a wired connection this morning and it popped into the authentications report but will have to test to make sure it repeats.
What is mostly in the log is simply the reports of the supplicant stopped responding to ISE. I know thought that I have at least 5 people that are connected via wireless. Here is a sample of what is in the log.

RFC Adapter not Call

Hello Friends,
I am working on XI 2.0
My Scenario is
IDOC --> XI --> RFC Adapter --> R/3 System
I am configuring the RFC adapter for the SAP system.
But when I am able to try to call using the Integration Engine its not call the RFC adapter.
I define the end point as
RFC Adapter
(X) Load Balancing Deactivated
Application Server -- <host name>
System Number -- 00
When I run the scenario it show me in the <b>sm58</b> transaction as
<b>Connection Close (no Data)</b>
And in the SXMB_MONI Transaction it shows
<b>A. Status</b> as <b>Green Flag</b> means <b>Message schedule on outbound side</b>.
So can you please identify and suggest me the solution or what else configuration is required.
Thanks & Regards,
Gaurav Jain

try to register all queues in SXMB_ADM -> Manage queues.
I think that should help you solve the issue.

Authenticator not called?

Similar Messages

Maybe you are looking for