Authorisation issue . - Report is running and running

Hello , By mistanly i resolved the last thread .
Yes , i have excuted the report by using RSSMQ and with the user id . I found the below messge .
Full Authorisation is requiered for this selection option .
A displayed hierachy requires option .
Could you please let me know , how i can solve this issue now .?
Thanks in advance.
Any way.
Run that report in tcode RSSMQ with that particular user id and try to check SU53 Tcode in another window for that user id immediatly after getting error message while running the report
RSSMQ - Runs report with other user ids
SU53 - gives information on authorisation problems if any (It is authorisation Trance)
Thanks.
Edited by: BI Dev on Jan 3, 2008 5:29 PM

I feel this is not authorisation issue. But i am not sure.
Any way.
Run that report in tcode RSSMQ with that particular user id and try to check SU53 Tcode in another window for that user id immediatly after getting error message while running the report
RSSMQ - Runs report with other user ids
SU53 - gives information on authorisation problems if any (It is authorisation Trance)
Thanks.
Edited by: BI Dev on Jan 3, 2008 5:29 PM

Similar Messages

  • Material wise reciept and Issue report with Opening and Closing Stock

    Hi
    I need a report,Material wise Receipt and issue with Opening and Closing stock.Is there any standard report available in SAP ?
    Or we have to go for Customised Report.
    Please reply

    Hi,
    MB5B gives total receipts - if i click on the receipts i can view the multiple material documents - BUT is there any way to drill down the reciepts or view the breakup of the receipts on the same screen OR is there any other report for this.
    Regards,
    Laxmi

  • Authorisation issue - the report is running and

    Hello friends,
    Need some help .
    There is one salary report , which user is not able to see the data . It is running and running for 1/2 hours
    and finally the message coming that action is cancelled.
    I have checked the data flow and everything seems correct .
    It seems the problem with user authorisation .
    How could i check the User id authorisation for this specific salary report. ?
    I am not aware about the more thing in authorisation.
    Thanks in advance.
    Regards

    I feel this is not authorisation issue. But i am not sure.
    Any way.
    Run that report in tcode RSSMQ with that particular user id and try to check SU53 Tcode in another window for that user id immediatly after getting error message while running the report
    RSSMQ - Runs report with other user ids
    SU53 - gives information on authorisation problems if any (It is authorisation Trance)
    Thanks.
    Edited by: BI Dev on Jan 3, 2008 5:29 PM

  • Running macro on Table using Report Generation Toolkit and Office 2003 Incompatible!!!!!!!

    Hi,
    I am using some functions under the Report Generation toolkit (LabView 7.1). We recently updated our test PCs from Office 2000 to 2003. The "WORD IMPORT MODULE.VI" returns error code -41113 when used with Word 2003. No problem on Word 2000.
    In fact even the example VI available under Find Examples - Run Macro on Word Table fails and returns error code -41113 when "WORD IMPORT MODULE.VI" is called on Word 2003. Word 2000 is OK.
    Any one faced this problem???? Any solution to this problem??
    I would greatly appreciate your feedback / suggestions.
    Thanks,
    Mim

    darren,
    thanks for your reply.
    After checking the the property "Trust access to Visual Basic Project" , I get the following error message:
    Exception occured in Microsoft Word, Unable to run the specified macro. Help Path is C:\Program Files\Microsoft Office\OFFICE11\1033\wdmain11.chm and context 37401 in Word Run Macro.vi->SetFirstRowAsTableHeaderforWord(Macro).vi->Generate Report.vi
    I can run the macro directly from Word.. no problem running macros in Excel dirently either. I get error message only when running macro from LabView. So, I doubt if it is an IT issue.
    You don't have a problem with Word 2003 and Word Import Module.vi???
    I am attaching my Vi-Report Generation.vi and the subvi. I would so much appreciate if you run ReportGenerate.vi on your PC and let me know if there is a problem.
    Many Thanks for your help.
    Mim
    Attachments:
    ReportGeneration.zip ‏75 KB

  • Running the report in Bitmap and Character mode

    Hi,
    We have the reports which can run in both the character mode and Bitmap mode. The only problem I'm facing is font size in the character mode report. If the report is run in Character mode then the font size of the report will be greater. As the sizer is bigger, I'm getting the X symbol in the place of report. Can i reduce the size of the font. I'm using the font Tahoma (8 points). Reports 6i Version and Windows Xp is the OS.
    Regards,
    Alok Dubey

    Hi this may solve u'r problem
    In Oracle Reports Designer, bitmap mode, you can make "C"
    bold and in a different font and point size than "c". This
    is because you are generating postscript output.
    Postscript is a universal printer language and any
    postscript printer is able to interpret your different
    design instructions.
    In Oracle Reports Designer, character mode, the
    APPLICATIONS STANDARDS REQUIRE the report to be designed in
    ONE FONT/ ONE CHARACTER SIZE. Character mode reports
    generate ASCII output. In ASCII you cannot dynamically
    change the font and character size. The standard is in
    effect so a report prints as identically as possible from
    both conventional and postscript printers.
    by....
    stanma

  • How to Schedule a Report to Run on a Specific Business Day and Not on the Weekend

    Hi,
    Is there a way to schedule a Webi report to run on a specific Business Day? For example, if I wanted a report to run on the 3rd day of every month, but when the 3rd day for a particular month landed on a Saturday or Sunday, then Monday would automatically be chosen instead. Is that possible?
    Thanks,
    Michael

    Hi Michael,
    You can do that by selecting the calendar option while scheduling the report and manually selecting the 3rd day of every month and when the 3rd day for a particular month landed on a Saturday or Sunday, then select the next Monday.
    I dont see any option available for this scenario directly in BO.
    Regards
    Sri Harsha

  • Regarding running a report in background and generate spool

    Hi,
    I am developing a report [<b>REPORT1</b>].
    It is taking long to execute if data is more.
    Now i want to schedule this report in background and generate spool along with.
    So once i execute REPORT1 it should run in background & generate spool?
    Can anybody give inputs for the same!
    Thanks,
    Deep.

    Hi,
              to generate spool, use below code
    FORM create_spool .
    CONSTANTS : l_c_device(4) VALUE 'LOCL'.
    Create Spool Request
    NEW-PAGE PRINT ON
    LINE-SIZE 120
    DESTINATION l_c_device
    IMMEDIATELY ' '
    KEEP IN SPOOL 'X'
    NEW LIST IDENTIFICATION 'X'
    NO DIALOG.
    ENDFORM. " create_spool
    And after createing spool to get the spool number use below code,
    FORM obtain_spool_id .
    TYPES : BEGIN OF t_tsp01,
    rqident TYPE tsp01-rqident,
    rqowner TYPE tsp01-rqowner,
    END OF t_tsp01.
    DATA : it_tsp01 TYPE STANDARD TABLE OF t_tsp01,
    wa_tsp01 LIKE LINE OF it_tsp01.
    SELECT rqident
    rqowner
    FROM tsp01
    INTO TABLE it_tsp01
    WHERE rqowner = sy-uname.
    SORT it_tsp01 BY rqident DESCENDING.
    READ TABLE it_tsp01 INTO wa_tsp01 INDEX 1.
    IF sy-subrc = 0 .
    v_spool_nr = wa_tsp01-rqident.
    ENDIF.
    Capture the immediate spool created for this report
    v_spool_nr = sy-spono.
    ENDFORM. " obtain_spool_id
    <b>Reward points</b>
    Regards

  • Wifi keeps scanning and dropping even after connected to home network.  Never had this issue until the update, and now my phone runs slow and terrible.  Horrible update!!  Any ideas on a fix?

    Wifi keeps scanning and dropping even after connected to home network.  Never had this issue until the update, and now my phone runs slow and terrible.  Horrible update!!  Any ideas on a fix?

    It's important that you have a steady WiFi connection, ZealousEdge. What phone do you have? Is your phone unable to connect to any WiFi network? If you can, please try deleting the saved WiFi network and re-adding it.
    AndreaS_VZW
    Follow us on Twitter @VZWSupport
    If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

  • Running the alv report  in  background and sending it thro email

    hi,
          i have to run the  alv report in background and send the output through email

    Hi
    Many a times there is a requirement to display ALV Grid (not ALV List) in the background Job. I have checked the SDN Forum for the same and it has been mentioned that ALV Grid cannot be displayed in Background, but the list output of ALV is possible. So user won’t have the actual Grid interface but the List interface.
    There is a workaround to display ALV Grid in Background Job. The only restriction is you can’t schedule the job through SM36. You need to execute the transaction of the report program, fill in the selection screen data and hit Execute.
    The job would be executed in background. User will be able to see the Job Log and Job Status after executing the program. User doesn’t have to go to SM37 to view the job status/log. Once the Job Status is changed to “COMPLETED”, user can click on “DISPLAY SPOOL” to view the ALV Grid.
    Limitations:
    Can’t schedulea background job
    The session should be active until the background job is completed. If the session is closed, then user won’t be able to check the output in ALV Grid. User would be able to check the output through spool or SM37
    Advantages:
    If the spool width is greater than 255 characters, then the entire width could be seen in the output because the output is directed to an ALV Grid and not to spool
    Interface of ALV Grid is available instead of ALV List even though it’s a background job.
    Program won’t give the TIME OUT error
    Steps Required:
    1. Once you execute the program, the following screen would be displayed
    2. Click “Display Job Status” to check the Status of the Background Job
    3. Click on “Display the Job Log” to check the Log
    4. Click on “Display Job Status” to check the Job Status
    5. Click on “DISPLAY SPOOL” to check the spool content once the Job Status is changed to “COMPLETED”. Output is displayed in ALV Grid
    Programs:
    1.  Two different programs needs to be created
    ZPROGRAM_ONE: This is the 1st program, where the selection screen and all the data validations would be done. Error handling for invalid data should be done in this program.
    Once the data validation is done, this program would call the 2nd program ZPROGEAM_TWO. Build the logic to display ALV Grid in this program. The logic will only display ALV in foreground and it won’t be reflected in the spool.
    ZPROGRAM_TWO: This program would fetch all the data and do all the processing. If you want the spool output along with ALV Grid output, then build the logic in this program to display ALV Grid.
    *& Report  ZPROGRAM_ONE                                                *
    REPORT  zprogram_one                            .
    PRASHANT PATIL
    TABLES : mara,
             tsp01.
    type-pools:slis.
    TYPES : BEGIN OF t_mara,
              matnr   TYPE mara-matnr,
              ersda   TYPE mara-ersda,
              ernam   TYPE mara-ernam,
              laeda   TYPE mara-laeda,
            END OF t_mara.
    DATA : i_mara       TYPE STANDARD TABLE OF t_mara,
           wa_mara      TYPE t_mara,
           wa_index     TYPE indx,        " For Index details
           wa_index_key TYPE indx-srtfd VALUE 'PRG_ONE',
           i_jobsteplist     TYPE STANDARD TABLE OF tbtcstep, " For spool number
           wa_params         TYPE pri_params,  " To Get Print Parameters
           wa_jobhead        TYPE tbtcjob,     " To know the status of job
           wa_jobsteplist    TYPE tbtcstep,    " To know the spool
           w_jobname         TYPE tbtco-jobname,  " Job name for bckgrnd job
           w_jobcount        TYPE tbtco-jobcount, " Unique id for bckgrd job
           w_path            TYPE string,         " Upload path
           w_lsind           TYPE sy-lsind,       " Index
           wa_seltab         TYPE rsparams,
           i_seltab          TYPE STANDARD TABLE OF rsparams,
           wa_index1         TYPE indx,        " For Index details
           wa_index_key1     TYPE indx-srtfd VALUE 'PRG_TWO',
           i_fieldcat        TYPE slis_t_fieldcat_alv,
           wa_fieldcat       LIKE LINE OF i_fieldcat.
            CONSTANTS DECLARATION                                        *
    CONSTANTS :
             c_a(1) TYPE c VALUE 'A',
             c_m(1) TYPE c VALUE 'M',
             c_l(1) TYPE c VALUE 'L',
             c_c(1) TYPE c VALUE 'C',
             c_zfdr(4) TYPE c VALUE 'ZFDR',
             c_x(1)    TYPE c VALUE 'X',
             c_locl(4) TYPE c VALUE 'LOCL', " Destination is LOCAL
             c_f(1)    TYPE c VALUE 'F',   " Job Status - Failed
             c_s(1)    TYPE c VALUE 'S',
             c_p(1)    TYPE c VALUE 'P'.
    SELECTION SCREEN PARAMETERS
    SELECT-OPTIONS : s_matnr FOR mara-matnr.
    START-OF-SELECTION.
    Before the export, fill the data fields before CLUSTR
      wa_index-aedat = sy-datum.
      wa_index-usera = sy-uname.
      EXPORT s_matnr
           TO DATABASE indx(st) FROM wa_index ID wa_index_key.
    To Open the Job for background processing
      PERFORM open_job.
    To get the print parameters
      PERFORM get_print_parameters.
    Submit the job in background
      PERFORM job_submit.
    Close the background job
      PERFORM job_close.
    This is the output screen with the buttons ********
    Create 3 buttons DISPLAY SPOOL, STATUS, JOBLOG
      SET PF-STATUS 'ZS001'.
      WRITE: / 'The program is submitted in Background'.
      WRITE: / 'Press DISPLAY SPOOL to see the spool'.
      WRITE: / 'Press STATUS to see the status of the background'.
    AT USER-COMMAND.
    If user presses the 'BACK' button
      IF sy-ucomm = 'BAK'.
        IF  wa_jobhead-status = c_f OR
            wa_jobhead-status = c_a.
          LEAVE TO SCREEN 0.
        ENDIF.
      ENDIF.
    If the user presses the 'DISPLAY SPOOL' Button
      IF sy-ucomm = 'DISPLAY'.
        PERFORM display_spool.
      ENDIF.
    If the user presses the 'JOB STATUS' Button
      IF sy-ucomm = 'STATUS'.
        PERFORM display_status.
      ENDIF.
    If the user presses the 'JOB LOG' Button
      IF sy-ucomm = 'JOBLOG'.
        PERFORM display_job_log.
      ENDIF.
    *&      Form  open_job
          text
    -->  p1        text
    <--  p2        text
    FORM open_job .
    This is to Create a new job which is to be submitted in background to
    process sales order/delivery/invoice
    Here we would get a unique id ( Jobcount ) which identifies our job
    along with the job name which we have assigned to our job
      CONCATENATE sy-uname
                  sy-datum
                  sy-uzeit
                          INTO w_jobname .  " Assign unique jobname
      CALL FUNCTION 'JOB_OPEN'
       EXPORTING
      DELANFREP              = ' '
      JOBGROUP               = ' '
        jobname                = w_jobname
      SDLSTRTDT              = NO_DATE
      SDLSTRTTM              = NO_TIME
      JOBCLASS               =
      IMPORTING
       jobcount                = w_jobcount
    CHANGING
      RET                    =
    EXCEPTIONS
       cant_create_job        = 1
       invalid_job_data       = 2
       jobname_missing        = 3
       OTHERS                 = 4
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
    ENDFORM.                    " open_job
    *&      Form  get_print_parameters
          text
    -->  p1        text
    <--  p2        text
    FORM get_print_parameters .
      DATA : l_valid TYPE c.
    This is to get the Print Parameters for the job which is to be
    submitted in background to process sales order/delivery/invoice
      CALL FUNCTION 'GET_PRINT_PARAMETERS'
       EXPORTING
      ARCHIVE_ID                   = C_CHAR_UNKNOWN
      ARCHIVE_INFO                 = C_CHAR_UNKNOWN
      ARCHIVE_MODE                 = C_CHAR_UNKNOWN
      ARCHIVE_TEXT                 = C_CHAR_UNKNOWN
      AR_OBJECT                    = C_CHAR_UNKNOWN
      ARCHIVE_REPORT               = C_CHAR_UNKNOWN
      AUTHORITY                    = C_CHAR_UNKNOWN
      COPIES                       = C_NUM3_UNKNOWN
      COVER_PAGE                   = C_CHAR_UNKNOWN
      DATA_SET                     = C_CHAR_UNKNOWN
      DEPARTMENT                   = C_CHAR_UNKNOWN
          destination                  = c_locl " LOCL
      EXPIRATION                   = C_NUM1_UNKNOWN
          immediately                  = space
      IN_ARCHIVE_PARAMETERS        = ' '
      IN_PARAMETERS                = ' '
      LAYOUT                       = C_CHAR_UNKNOWN
      LINE_COUNT                   = C_INT_UNKNOWN
      LINE_SIZE                    = C_INT_UNKNOWN
      LIST_NAME                    = C_CHAR_UNKNOWN
      LIST_TEXT                    = C_CHAR_UNKNOWN
      MODE                         = ' '
          new_list_id                  = c_x
      PROTECT_LIST                 = C_CHAR_UNKNOWN
          no_dialog                    = c_x
      RECEIVER                     = C_CHAR_UNKNOWN
      RELEASE                      = C_CHAR_UNKNOWN
      REPORT                       = C_CHAR_UNKNOWN
      SAP_COVER_PAGE               = C_CHAR_UNKNOWN
      HOST_COVER_PAGE              = C_CHAR_UNKNOWN
      PRIORITY                     = C_NUM1_UNKNOWN
      SAP_OBJECT                   = C_CHAR_UNKNOWN
      TYPE                         = C_CHAR_UNKNOWN
          user                         = sy-uname
      USE_OLD_LAYOUT               = ' '
      UC_DISPLAY_MODE              = C_CHAR_UNKNOWN
      DRAFT                        = C_CHAR_UNKNOWN
      ABAP_LIST                    = ' '
      USE_ARCHIVENAME_DEF          = ' '
      DEFAULT_SPOOL_SIZE           = C_CHAR_UNKNOWN
      PO_FAX_STORE                 = ' '
      NO_FRAMES                    = C_CHAR_UNKNOWN
       IMPORTING
      OUT_ARCHIVE_PARAMETERS       =
          out_parameters               = wa_params
       valid                        = l_valid
       EXCEPTIONS
         archive_info_not_found       = 1
         invalid_print_params         = 2
         invalid_archive_params       = 3
         OTHERS                       = 4
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
    ENDFORM.                    " get_print_parameters
    *&      Form  job_submit
          text
    -->  p1        text
    <--  p2        text
    FORM job_submit .
    The job which we have created & the unique id ( jobcount ) which we
    have got identifies our job. Hence those parameters are passed along
    with the name of the background program "ZPROGRAM_TWO"
    The job is submitted in background.
      CALL FUNCTION 'JOB_SUBMIT'
        EXPORTING
      ARCPARAMS                         =
        authcknam                         = sy-uname
      COMMANDNAME                       = ' '
      OPERATINGSYSTEM                   = ' '
      EXTPGM_NAME                       = ' '
      EXTPGM_PARAM                      = ' '
      EXTPGM_SET_TRACE_ON               = ' '
      EXTPGM_STDERR_IN_JOBLOG           = 'X'
      EXTPGM_STDOUT_IN_JOBLOG           = 'X'
      EXTPGM_SYSTEM                     = ' '
      EXTPGM_RFCDEST                    = ' '
      EXTPGM_WAIT_FOR_TERMINATION       = 'X'
        jobcount                          = w_jobcount
        jobname                           = w_jobname
      LANGUAGE                          = SY-LANGU
        priparams                         = wa_params
        report                            = 'ZPROGRAM_TWO'
      VARIANT                           = ' '
    IMPORTING
      STEP_NUMBER                       =
       EXCEPTIONS
         bad_priparams                     = 1
         bad_xpgflags                      = 2
         invalid_jobdata                   = 3
         jobname_missing                   = 4
         job_notex                         = 5
         job_submit_failed                 = 6
         lock_failed                       = 7
         program_missing                   = 8
         prog_abap_and_extpg_set           = 9
         OTHERS                            = 10
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
    ENDFORM.                    " job_submit
    *&      Form  job_close
          text
    -->  p1        text
    <--  p2        text
    FORM job_close .
    Once the job is submitted in background then the job is closed
      CALL FUNCTION 'JOB_CLOSE'
        EXPORTING
      AT_OPMODE                         = ' '
      AT_OPMODE_PERIODIC                = ' '
      CALENDAR_ID                       = ' '
      EVENT_ID                          = ' '
      EVENT_PARAM                       = ' '
      EVENT_PERIODIC                    = ' '
        jobcount                          = w_jobcount
        jobname                           = w_jobname
      LASTSTRTDT                        = NO_DATE
      LASTSTRTTM                        = NO_TIME
      PRDDAYS                           = 0
      PRDHOURS                          = 0
      PRDMINS                           = 0
      PRDMONTHS                         = 0
      PRDWEEKS                          = 0
      PREDJOB_CHECKSTAT                 = ' '
      PRED_JOBCOUNT                     = ' '
      PRED_JOBNAME                      = ' '
      SDLSTRTDT                         = NO_DATE
      SDLSTRTTM                         = NO_TIME
      STARTDATE_RESTRICTION             = BTC_PROCESS_ALWAYS
        strtimmed                         = c_x
      TARGETSYSTEM                      = ' '
      START_ON_WORKDAY_NOT_BEFORE       = SY-DATUM
      START_ON_WORKDAY_NR               = 0
      WORKDAY_COUNT_DIRECTION           = 0
      RECIPIENT_OBJ                     =
      TARGETSERVER                      = ' '
      DONT_RELEASE                      = ' '
      TARGETGROUP                       = ' '
      DIRECT_START                      =
    IMPORTING
      JOB_WAS_RELEASED                  =
    CHANGING
      RET                               =
       EXCEPTIONS
         cant_start_immediate              = 1
         invalid_startdate                 = 2
         jobname_missing                   = 3
         job_close_failed                  = 4
         job_nosteps                       = 5
         job_notex                         = 6
         lock_failed                       = 7
         invalid_target                    = 8
         OTHERS                            = 9
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
    ENDFORM.                    " job_close
    *&      Form  display_spool
          text
    -->  p1        text
    <--  p2        text
    FORM display_spool .
    To Read the Job to get the spool details
      DATA : l_rqident TYPE tsp01-rqident, " Spool Number
             l_spoolno TYPE tsp01_sp0r-rqid_char.
      CLEAR : l_rqident,
              w_lsind,
              wa_jobsteplist.
      REFRESH : i_jobsteplist.
      SET PF-STATUS 'ZAR02'.
    Get the Spool Number
      CALL FUNCTION 'BP_JOB_READ'
        EXPORTING
          job_read_jobcount           = w_jobcount
          job_read_jobname            = w_jobname
          job_read_opcode             = '20'
        JOB_STEP_NUMBER             =
       IMPORTING
         job_read_jobhead            = wa_jobhead
       TABLES
         job_read_steplist           = i_jobsteplist
    CHANGING
       RET                         =
       EXCEPTIONS
         invalid_opcode              = 1
         job_doesnt_exist            = 2
         job_doesnt_have_steps       = 3
         OTHERS                      = 4
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
    Read the Job Step list to get the spool number
      READ TABLE i_jobsteplist INTO wa_jobsteplist INDEX 1.
      CHECK wa_jobsteplist-listident <> space.
    Spool Number
      l_rqident = wa_jobsteplist-listident.
      MOVE l_rqident TO l_spoolno.
    Check the spool in TSP01
      SELECT SINGLE * FROM tsp01 WHERE rqident = l_rqident.
      IF  sy-subrc = 0.
        LEAVE TO LIST-PROCESSING.
        CALL FUNCTION 'RSPO_R_RDELETE_SPOOLREQ'
          EXPORTING
            spoolid       = l_spoolno
        IMPORTING
          RC            =
          STATUS        =
        PERFORM show_alv.
      ENDIF.
      w_lsind = sy-lsind.
      IF sy-lsind GE 19.
        sy-lsind = 1.
      ENDIF.
    ENDFORM.                    " display_spool
    *&      Form  show_alv
          text
    -->  p1        text
    <--  p2        text
    FORM show_alv .
    Before the import, fill the data fields before CLUSTR.
      wa_index1-aedat = sy-datum.
      wa_index1-usera = sy-uname.
    To Import the selection screen data from Calling Program
      IMPORT i_mara
      FROM DATABASE indx(st) ID wa_index_key1 TO wa_index1.
      FREE MEMORY ID wa_index_key1.
    This prepares the field-catalog for ALV.
      PERFORM prepare_fieldcatalog.
    This displays the output in  ALV format .
      PERFORM display_alv.
    ENDFORM.                    " show_alv
    *&      Form  display_status
          text
    -->  p1        text
    <--  p2        text
    FORM display_status .
    To Display the STATUS of the JOB which is exectued in background
      CLEAR : wa_jobsteplist.
      REFRESH : i_jobsteplist.
      WRITE:/ 'DISPLAYING JOB STATUS'.
      CALL FUNCTION 'BP_JOB_READ'
        EXPORTING
          job_read_jobcount           = w_jobcount
          job_read_jobname            = w_jobname
          job_read_opcode             = '20'
        JOB_STEP_NUMBER             =
       IMPORTING
         job_read_jobhead            = wa_jobhead
       TABLES
         job_read_steplist           = i_jobsteplist
    CHANGING
       RET                         =
       EXCEPTIONS
         invalid_opcode              = 1
         job_doesnt_exist            = 2
         job_doesnt_have_steps       = 3
         OTHERS                      = 4
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
    To Display the status text as per the status type
      CASE wa_jobhead-status.
        WHEN 'S'. WRITE: / 'Scheduled'.
        WHEN 'R'. WRITE: / 'Released'.
        WHEN 'F'. WRITE: / 'Completed'.
        WHEN 'A'. WRITE: / 'Cancelled'.
        WHEN OTHERS.
      ENDCASE.
      IF sy-lsind GE 19.
        sy-lsind = 1.
      ENDIF.
    ENDFORM.                    " display_status
    *&      Form  display_job_log
          text
    -->  p1        text
    <--  p2        text
    FORM display_job_log .
    To display the log of the background program
      LEAVE TO LIST-PROCESSING.
      CALL FUNCTION 'BP_JOBLOG_SHOW_SM37B'
        EXPORTING
          client                    = sy-mandt
          jobcount                  = w_jobcount
          joblogid                  = ' '
          jobname                   = w_jobname
        EXCEPTIONS
          error_reading_jobdata     = 1
          error_reading_joblog_data = 2
          jobcount_missing          = 3
          joblog_does_not_exist     = 4
          joblog_is_empty           = 5
          joblog_show_canceled      = 6
          jobname_missing           = 7
          job_does_not_exist        = 8
          no_joblog_there_yet       = 9
          no_show_privilege_given   = 10
          OTHERS                    = 11.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
    ENDFORM.                    " display_job_log
    *&      Form  prepare_fieldcatalog
          text
    -->  p1        text
    <--  p2        text
    FORM prepare_fieldcatalog .
      CLEAR wa_fieldcat.
      wa_fieldcat-fieldname    = 'MATNR'.
      wa_fieldcat-tabname      = 'I_MARA'.
      wa_fieldcat-reptext_ddic = 'Material no.'.
      wa_fieldcat-outputlen    = '18'.
      APPEND wa_fieldcat TO i_fieldcat.
      CLEAR wa_fieldcat.
      wa_fieldcat-fieldname    = 'ERSDA'.
      wa_fieldcat-tabname      = 'I_MARA'.
      wa_fieldcat-reptext_ddic = 'Creation date'.
      wa_fieldcat-outputlen    = '10'.
      APPEND  wa_fieldcat TO i_fieldcat.
      CLEAR wa_fieldcat.
      wa_fieldcat-fieldname    = 'ERNAM'.
      wa_fieldcat-tabname      = 'I_MARA'.
      wa_fieldcat-reptext_ddic = 'Name of Person'.
      wa_fieldcat-outputlen    = '10'.
      APPEND wa_fieldcat TO i_fieldcat.
      CLEAR wa_fieldcat.
      wa_fieldcat-fieldname    = 'LAEDA'.
      wa_fieldcat-tabname      = 'I_MARA'.
      wa_fieldcat-reptext_ddic = ' Last Change'.
      wa_fieldcat-outputlen    = '10'.
      APPEND  wa_fieldcat TO i_fieldcat.
    ENDFORM.                    " prepare_fieldcatalog
    *&      Form  display_alv
          text
    -->  p1        text
    <--  p2        text
    FORM display_alv .
    Call ABAP List Viewer (ALV)
      call function 'REUSE_ALV_GRID_DISPLAY'
        exporting
          it_fieldcat  = i_fieldcat
        tables
          t_outtab     = i_mara.
    ENDFORM.                    " display_alv
    •     ZPROGRAM_TWO: This is the 2nd program which would be called from program ZPROGRAM_ONE.
    *& Report  ZPROGRAM_TWO                                                *
    REPORT  zprogram_two                            .
    PRASHANT PATIL
    TABLES : mara.
    TYPE-POOLS:slis.
    TYPES : BEGIN OF t_mara,
              matnr   TYPE mara-matnr,
              ersda   TYPE mara-ersda,
              ernam   TYPE mara-ernam,
              laeda   TYPE mara-laeda,
            END OF t_mara.
    DATA : i_mara        TYPE STANDARD TABLE OF t_mara,
           wa_mara       TYPE t_mara,
           wa_index      TYPE indx,        " For Index details
           wa_index_key  TYPE indx-srtfd VALUE 'PRG_ONE',
           wa_index1     TYPE indx,        " For Index details
           wa_index_key1 TYPE indx-srtfd VALUE 'PRG_TWO',
           i_fieldcat        TYPE slis_t_fieldcat_alv,
           wa_fieldcat       LIKE LINE OF i_fieldcat.
    SELECT-OPTIONS : s_matnr FOR mara-matnr.
    Before the import, fill the data fields before CLUSTR.
    wa_index-aedat = sy-datum.
    wa_index-usera = sy-uname.
    To Import the selection screen data from Calling Program
    IMPORT s_matnr
    FROM DATABASE indx(st) ID wa_index_key TO wa_index.
    FREE MEMORY ID wa_index_key.
    SELECT matnr
           ersda
           ernam
           laeda
           FROM mara
           INTO TABLE i_mara
           WHERE matnr IN s_matnr.
    PERFORM prepare_fieldcatalog.
    PERFORM display_alv.
    Before the export, fill the data fields before CLUSTR
    wa_index1-aedat = sy-datum.
    wa_index1-usera = sy-uname.
    EXPORT i_mara
    TO DATABASE indx(st) FROM wa_index1 ID wa_index_key1.
    *&      Form  prepare_fieldcatalog
          text
    -->  p1        text
    <--  p2        text
    FORM prepare_fieldcatalog .
      CLEAR wa_fieldcat.
      wa_fieldcat-fieldname    = 'MATNR'.
      wa_fieldcat-tabname      = 'I_MARA'.
      wa_fieldcat-outputlen    = '18'.
      APPEND wa_fieldcat TO i_fieldcat.
      CLEAR wa_fieldcat.
      wa_fieldcat-fieldname    = 'ERSDA'.
      wa_fieldcat-tabname      = 'I_MARA'.
      wa_fieldcat-outputlen    = '10'.
      APPEND  wa_fieldcat TO i_fieldcat.
      CLEAR wa_fieldcat.
      wa_fieldcat-fieldname    = 'ERNAM'.
      wa_fieldcat-tabname      = 'I_MARA'.
      wa_fieldcat-outputlen    = '10'.
      APPEND wa_fieldcat TO i_fieldcat.
      CLEAR wa_fieldcat.
      wa_fieldcat-fieldname    = 'LAEDA'.
      wa_fieldcat-tabname      = 'I_MARA'.
      wa_fieldcat-outputlen    = '10'.
      APPEND  wa_fieldcat TO i_fieldcat.
    ENDFORM.                    " prepare_fieldcatalog
    *&      Form  display_alv
          text
    -->  p1        text
    <--  p2        text
    FORM display_alv .
    Call ABAP List Viewer (ALV)
      CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
        EXPORTING
          it_fieldcat = i_fieldcat
        TABLES
          t_outtab    = i_mara.
    ENDFORM.                    " display_alv
    its possible to display ALV Grid using OO ALV. Following code can be used instead of FM.
    In the PBO, add following code
    SET PF-STATUS 'ZSTAT'.
    If program is executed in background
    CALL METHOD cl_gui_alv_grid=>offline
    RECEIVING
    e_offline = off.
    IF off IS INITIAL.
    IF container1 IS INITIAL.
    CREATE OBJECT container1
    EXPORTING
    container_name = 'CC_ALV1' .
    ENDIF.
    ENDIF.
    CREATE OBJECT g_grid1
    EXPORTING
    i_parent = container1.
    CALL METHOD g_grid1->set_table_for_first_display
    EXPORTING
    I_BUFFER_ACTIVE =
    I_BYPASSING_BUFFER =
    I_CONSISTENCY_CHECK =
    I_STRUCTURE_NAME =
    IS_VARIANT =
    i_save = 'A'
    i_default = ' '
    is_layout =
    is_print =
    IT_SPECIAL_GROUPS =
    it_toolbar_excluding =
    IT_HYPERLINK =
    IT_ALV_GRAPHICS =
    IT_EXCEPT_QINFO =
    CHANGING
    it_outtab = i_output
    it_fieldcatalog = i_fieldcatalog
    IT_SORT =
    IT_FILTER =
    EXCEPTIONS
    invalid_parameter_combination = 1
    program_error = 2
    too_many_lines = 3
    OTHERS = 4
    IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
    Reward points if useful
    Regards
    Anji

  • Cannot get report to run, dataTemplate query issues

    Report was running fine until I turned one of my data modules from a SQL Query to a Data Template. I've narrowed it down to the query causing the error(Index: 0, Size: 0????), any ideas what specifically is causing the error? Perhaps the union or decode?
    <dataTemplate name="imapctMatrix" dataSourceRef="asetdev" defaultPackage="pkg_ea_engine">
    <parameters>
    <parameter name="EAD_ID" dataType="number" defaultValue="0"/>
    </parameters>
    <dataQuery>
    <sqlstatement name="Q1"><![CDATA[
    SELECT EPJ_ID, env_name ||' - '||LAYER_NAME layer_name,
    DECODE(MAX(decode(color,'WHITE', 0,'RED',99,'YELLOW',98,'GREEN',97)),0,'NONE',99,'HIGH',98,'MODERATE',97,'LOW') COLOR,
    ENV_NAME,
    ALT_NAME,
    DECODE(ALT_NAME,'PROPOSED ACTION',0,'NO ACTION',99,ALT_NUM)
    FROM temp_ea_impact_rep
    WHERE (EPJ_ID = (select EPJ_ID from EAD_DESCRIPTIVE_INFO WHERE EAD_ID = :EAD_ID))
    GROUP BY EPJ_ID,ALT_NAME, ENV_NAME, LAYER_NAME,ALT_NUM
    union
    SELECT distinct EPJ_ID, env_name ||' - '||LAYER_NAME layer_name, 'NONE' COLOR, ENV_NAME, 'NO ACTION',99
    FROM temp_ea_impact_rep
    WHERE (EPJ_ID = (select EPJ_ID from EAD_DESCRIPTIVE_INFO WHERE EAD_ID = :EAD_ID))
    and color <> 'WHITE'
    GROUP BY EPJ_ID, LAYER_NAME, COLOR, ENV_NAME, 'NO ACTION'
    order by 2
    ]]></sqlstatement>
    </dataQuery>
    <dataTrigger name="beforeReport" source="pkg_ea_engine.createeaimpact(:EAD_ID)"/>
    </dataTemplate>

    color <> 'WHITE' was causing the error

  • How to know what reports are running by looking at SSReproting Services to see what reports are running and also any clue of which application is using the reporting services?

    How to know what reports are running by looking at SSReproting Services to see what reports are running and also any clue of which application is using the reporting services?

    To see what reports are running, take a look at the execution log views that are available in the database.  Which views that are available are dependent on your version of SSRS.
    http://technet.microsoft.com/en-us/library/ms159110.aspx
    To see which application is using SSRS is a little more difficult.  You can turn HTTP logging on, which will give you an idea of where connections are coming from, so you can see IP addresses.  You can also look at the execution log view to see
    user accounts.  So, depending on your environment and use of service accounts, this could be easy, or difficult.
    http://technet.microsoft.com/en-us/library/bb630443.aspx
    If all else fails you can look for clues in the SSRS logs.  Good luck...

  • How do I find the report server name, and then run paper report from forms?

    How do I find the report server name, and then run paper report from forms?
    I am having a problem running report 9i from forms 9i (see below thread). How do I find out the name of the report server? I checked my C:\ids\reports\conf directory but don't see anything that gives me the name of the reports server. I also don't have a iashome directory.
    Also, I just want to run the paper report (not the web version).
    Thanks.

    Hi,
    please read teh Forms / Reports integration paper in teh Collateral section for Oracle9i Forms at otn.oracle.com/products/forms
    In summary, you have to create an external Reports Service that you can then give a name.
    Frank

  • Forms and Reports 10g run on the other client machine

    Dear Sir,
    Please tell me how to run forms/reports which is compiled/build in ORACLE 10g.
    I mean that I have build some forms and reports in Oracle 10g now I want to run them on another client machine without creating oracle application server. Is there any way to run
    As example in oracle 6.0 i we only install forms and reports services at client machine and ours froms/ reports are running. Can we do so in 10g also ??
    Please guide me about it.
    Ghulam Yassen

    without creating oracle application server. That is not possible. Forms 10 only runs in web mode, so you need the OAS with the Forms and Reports sever (OAS Enterprise Edition) or the Forms and Reports 10g stand alone server.
    in oracle 6.0 i we only install forms and reports services at client machineForms 6i was the last version that you can run in client/server mode.

  • HT1199 Hi. I've got an issue with Pages running on Mavericks on Macbook air. Every time I open the app it hangs right there and I can't do anything on it. I've uninstall and install it back again but the issue still persists. Any help please?

    HI. I've got an issue with Pages running on Mavericks. Everytime I open it up it just hangs right there and I can't do anything with it. I've deleted the app and installed it back again but the problem sitll persists. Any help please?

    Thank you so much for helping,
    But i really wonder how you did that. did you always switch between design view and preview view, then change the key position for 2px then switch back, to align the four letters? because i imagine that can get really frustrating, if you have a logo consisting of 58 parts instead of 4!:)
    Anyway thank you very much for your time and effort!!!!

  • I have a new Macbook pro and need to run some Windows software, it appears "Parallel" should work well from what I've have read. Will I have any issues or problems accessing and printing from various printers on my Windows 7 network within Parallel?

    I have a new Macbook pro and need to run some Windows software, it appears "Parallel" should work well from what I've have read. Will I have any issues or problems accessing and printing from various printers on my Windows 7 network within Parallel? Is Parallel in fact the best way to go?

    First, back up all data immediately, as your boot drive might be failing.
    There are a few other possible causes of generalized slow performance that you can rule out easily.
    Reset the System Management Controller.
    If you have many image or video files on the Desktop with preview icons, move them to another folder.
    If applicable, uncheck all boxes in the iCloud preference pane.
    Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
    Check your keychains in Keychain Access for excessively duplicated items.
    If you have more than one user account, you must be logged in as an administrator to carry out this step.
    Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

Maybe you are looking for