Authorization object to disable execute Button in Workflow Inbox
I have a scenario where user can able to see workflow in Inbox but they are not suppose execute workflow(Disable Execute Icon), what is the authorization object i need to use to disable this.
Thanks,
Nar
Can you modify the method that is executed when you click the work item itself (is it a standard one)? If yes, just code a authorisation check there before the actual code.
Or user authorisation trace to find out a possible authorisation checks when executing the work item. Hard to imagine that someone would know the object for this unlikely scenario. Or check that which transaction is launched from the code, and see if there is already some nice authorisation check (also with the trace).
Regards,
Karri
Similar Messages
-
Disable execute button on selection screen
Hi Experts,
I need to disable execute button on the selection screento restrict program to run in foreground and add another buttn which schedules a job in background. Kindly help.
Thanks in advance.TABLES: sscrfields.
include rsdbc1xx.
INITIALIZATION .
sscrfields-functxt_01 = 'Button1'.
SELECTION-SCREEN: FUNCTION KEY 1.
AT SELECTION-SCREEN OUTPUT.
append 'ONLI' to current_scr-excl.
AT SELECTION-SCREEN.
CASE sy-ucomm.
WHEN 'FC01'.
"* Here you write your logic for background job
ENDCASE.
I have the same problem. This works like a charm!
Thanks Dzed Maroz.
Edited by: Samanta Limbrada on Mar 30, 2011 6:29 AM -
How to disable execute button in ABAP report
Hi,
Is it possible to disbale the execute button of ABAP report? If yes, how?
Thanks & Regards,
LohitYou can do this
You can set the Authorization for execution and Assign it to user whom you dont want that option. so that they cannot execute the Program. -
Authorization object for Notification Disconnect button
Hi Group
Do We have any authorization object which control
Notification Disconnect button in IW32 Order Header screenRefer below screen shot.
While trying to remove order assignment from notification, above shown error message has come. Hope, this is what you are expecting both in assignment as well as removal of assignment.
Check your roles & assignment of appropriate field values in those roles. If you are not comfortable in PFCG, discuss with Basis consultants.
Check Authorization Object I_VORG_MEL as well for the previously mentioned values. -
Authorization object to disable BCT INSTALLATION
Bw experts,
We are needing to limit the access of BCT object install (business content BW) in transaction RSA1 or RSORBCT.
Do you know if exists an "authorization object" that it disables the commands INSTALL ?
Tks
PortellaHi Roberto ,
We have some developers BW that need at least visualizing objects BCT (but not installation) .
If we exclude the transaction RSORBCT thus we continue having same access to BCT by RSA1 .
We are testing the object S_RS_ADMWB , do you know it ?
Tks
Portella -
How to disable execute button in selection-screen
Hi,
I have already placed a execute button in selection screen but now I want to diable
1. All std buttons including F8
2. but excluding F1
regards
paulHi
Check this FM : RS_SET_SELSCREEN_STATUS
sample code :
DATA: BEGIN OF i_exc OCCURS 0,
code LIKE sy-ucomm,
END OF i_exc.
DATA: ws_repid like sy-repid.
CLEAR i_exc.
i_exc-code = 'ONLI'.
APPEND i_exc.
MOVE: sy-repid TO ws_repid .
CALL FUNCTION 'RS_SET_SELSCREEN_STATUS'
EXPORTING
p_status = ' '
p_program = ws_repid
TABLES
p_exclude = i_exc.
Laxman
Message was edited by: Laxmana Kumar -
Disable post button for workflow parking FB75
Hello Experts,
I am implementing workfllow for approval of FB75. Workflow is getting triggered on park option.
My Requirment is to disable the POST button to ensure the approval before posting the document.
Thanks,
SangeetaThis can be done using following configuration from SPRO .
1) Create WF variant
2) setup release group
3) setup release approval path
4) assign release approval group and document type to release approval path
when setting up the WF variant the "posting release" flag determines in the doument has to be approved before posting.
check with your fucntional team for more information.
Regards,
Sarath. -
How to check and maintain authorization objects
Hi Alll
Let me knowhow to check and maintain authorization objects in SU24 ECC 6.0.
Thanks
sathiesHi Sathies,
the old check flags
U
Unmaintained
No indicator set. The check for corresponding authorization object is always executed. Field values are not displayed in the Profile Generator.
N
No check
Check disabled. Field values are not displayed in the Profile Generator. This indicator cannot be set for HR and Basis authorization objects.
C
Check
Check always executed. Field values are not displayed in the Profile Generator. For example: Printer authorizations.
CM
Check/maintain
Check always executed. Field values are displayed for changing in the Profile Generator (yellow light).
Have been divided now in
Checkindicator : Check/NoCheck
and
Proposal: Yes/No.
If defaults=yes, then you can modify them after clicking on the apropriate button.
Please refer to the online help for SU24 too.
Although the look of su24 has been changed significantly, the technique behind it is still the same.
Once you have pressed the 'edit'-button on the top left corner, additional editing options will appear in the right-top-frame.
b.rgds,
Bernhard -
Program with authorization object
Hi Experts,
I have an issue regarding rules and authorization.
I have created a program with 2 radio buttons transfer and backload. The requirement in authorization is not all users can access both; some can only access transfer and some can access backload only. (r_trans,r_back)
The basis told me that they need an authorization object in order for them to block/separate the transaction for transfer and backload.
Is there a way for me to modify the program and put an authorization object with my radio button? or is it possible to do this with the current program?
Thanks!Hi,
Thanks for the reply,
Our basis is using PFCG for roles and authorization , how can they check if my authorization object was created using that code?
Here is my code: Im getting sy-subrc = 12.
IF r_trans EQ 'X'.
AUTHORITY-CHECK OBJECT 'ZACTIVITY'
ID 'ACTVT' FIELD '01'.
IF sy-subrc NE '0'.
MESSAGE 'User not authorized' TYPE 'S'.
LEAVE LIST-PROCESSING.
ELSE.
MESSAGE 'User is authorized' TYPE 'S'.
LEAVE LIST-PROCESSING.
ENDIF.
ELSEIF r_back EQ 'X'.
AUTHORITY-CHECK OBJECT 'ZACTIVITY'
ID 'ACTVT' FIELD '02'.
IF sy-subrc NE '0'.
MESSAGE 'User not authorized' TYPE 'S'.
ELSE.
MESSAGE 'User is authorized' TYPE 'S'.
ENDIF.
ENDIF. -
Authorization object for ML81N
Hi
I am trying to know what is the authorization object that controls :
when going to transaction ML81N and you click on the colorful icon on the right (configuration) it opens the table settings window
what is the authorization object for the administrator button
regardswell.......to be honest, i did my research based on some intuition and some research
I know that the settings could be changed not only for the transaction you mentioned, but i remember that i was taught that this could be changed for Sales order transactions too, which suggests that this is not bound to a specific transaction but more on a "generic plane"
whenver it is system wide settings, the first think i check for (just a habit) is on S_ADMI_FCD, earlier experiences taught me a lot on the importance of this object, make sure that you never have a * for this object (at least that is my personal learning and opinion)
Good luck for the future -
Authorization object in procurement that checks user role
Hi Experts,
Please let me know if we have any standard authorization objects in the transactions PO or PR that checks the SAP User role. Authorization check can be done by sap role, we are not botherd checking on company code, purchase group and so on, Is there any standard procedure to find out that or any function module available to check that by passing user role. << removed >>
Cheers
Mohan
Edited by: Rob Burbank on Feb 19, 2010 12:24 PMeasiest way to find all authorization objects is to execute SU24.
There you enter the transaction code for which you want find the authorization objects. -
Disabling delete button in service object list fom VA03
Hi all,
i want to disable the delete and change button in attachment list of service object list (GOS) IN T CODE VA03.
I have found that it can be done by modifying the method CHECK_STATUS of class CL_GOS_SRV_ATTACHMENT_LIST,
and then calling it in t code SGOS.
i have copied this class to a Z CLASS but unable to modify the method it asks for access key.
any help is highly appreciated with example.
thanks,
pankaj guptaHello,
The authorizations in GOS has nothing to do with the authorization in
application level, e.g. in VA03. In standard you can use the new
authorization object S_GOS_ATT from SAP note: 1293080.
Otherwise:
A possible workaround could be the following:
Without an authorization the attachments are only deletable by the
owners or by users with sapoffice administrator authorization. If you
do not give users this sapoffice admin authorization, than only the
owners are able to delete the attachments. See SAP note: 552127
(point 3).
OR due to a modification some functionalities can be restricted.
For more information you can read the SAP note: 491271.
Regards,
David -
Authorization object for Command Button
Hi all,
How can I create the Authorization object for command button which is on application server.
if you do not have auth when you click on that command button, it should be say 'you dont have auth'.
please help me in this.
regards,
Ajay reddyHi,
Tcode for Authorization Objects are,
su20----> for defineing authorization field ,
su21-----> for authorization class,
su22------> for assignement authorization object
To create an authorization object:
1) Execute transaction SU21
2) Double-click an Object Class to select a class that should contain
your new auth object
3) Click on CREATE (F5)
4) (If creating custom field) - Click the 'Field Maintenance' button -->
Click on CREATE (Shift+F1)
5) Enter the Name for the New Authorization field and the corresponding
Data Element and SAVE
6) Confirm the Change Request data for the new Authorization Field
7) Go back two screens (F3-->F3)
8) Enter the Authorization field name and document the object:
9) SAVE and ACTIVATE the documentation
10) Save the new Authorization Object
11) Confirm the change request data for the Authorization Object and
EXIT SU21
12) Finally, the SAP_ALL profile must be re-generated
Regards,
hema. -
Can not read authorization object in execute Query
hello:
Now I create a authorization object ZSALR, include Activity,Sales Group,Sales Office. Activity = Display ,Execute;
When Sales Group = S_N and Sale Office = S_SX. I execute Query restrict by Sales Group and Sale Office.
Warning message"You do not have authorization to read to ZSALR"
When Sales Group = * and Sale Office = *. I execute Query OK, and display all infomation. and explain "S_N" and "S_SX" can display in middle part in Query.
Hope someone can tell me how to solve the error.
Regards&Thanks!This occurs because , something in the class has changed . Every class has a serial id associated with . It is unique. even if a member var changes , this id will change .
You are trying to deserialize a serialised object with a changed version of the class .
You can see the serial id using "serialver" utility provided with jdk in bin directory -
Authorization objects Workflow HR
Hi,
I would like to know authorization objects related to workflow .
that to restrict the user that when he forward a workitem...to which users he can forward..
Thanks,
nachyYou have to first make that particular standard task as General forwarding not allowed. After this in the Task level you have to assign the Authorization role to this Task. Now if the user tries to forward workitem to user who is not maintained in this role he will not be able to do so.
Thanks
Arghadip
Maybe you are looking for
-
for example: <?php create table testtable ( company varchar2(6), order_number number(4), item_id number(4), quantity number(8), item_desc varchar2(16) insert into testtable values ('A',1001,1,10,'apple'); insert into testtable values ('A',1001,2,20,'
-
Change on input to cater for single and multiple files?
This script currently allows me to drop a single file on to the droplet and it processes it, I would like to be able to drop 1 or more items on it at the same time. How can I get it to do all that are dropped on the droplet please? Matt property type
-
bonjour tout le monde!j ai besoin du cd ou dvd du demarrage pour mon powerbook G4 a savoir mac os x 10.5. est ce qu il y a moyen d arranger ca avec l argent ou mes remerciements ou les deux? en tous les cas je commence par vous dire merci!
-
E5 Ovi Store update Problem/Bug
Hi, Had a notification that a newer version of Nokia / OVI store was available today (22/02/12 Ver. Ovistore_32prdSrv_1_22_014.sisx) so I downloaded and installed it..... BUT.... It stores cache on the phone memory in a directory imagecache/Juniper
-
Hardware Recommendation Needed for HRMS iRecruitment
We are deploying the HRMS iRecruitment module. I am trying to spec out an external (dmz) web tier server. Is anyone using the SunFire 1200? I appreciate any hardware suggestions. Thanks for your time.