Auto creation of child requests when parent request has more than one group

Hi,
I have created a request dataset which has a child form for AD Group. While raising a request, if I add more than one group, how to process the approval flow. Because I will be having different different approvers for different different groups. Is there any way to create child requests automatically when we submit a request with more than one group? I am using OIM 11.1.1.5.0.
I know in OIM 11g, whenever user raises request for more than one beneficiary/target-resource then OIM breaks that request into Child Requests. But this is not happening when I add more than one group in the same resource. Do I need to write my own code for DataValidator to split parent request into child requests upon validating child form? If so, is it going to impact the existing feature which is creating child request when parent has more than one user/resource.
Please let me know.

No not possible OOTB in current version. Check {thread:id=2318652} for more information.
-Bikash

Similar Messages

Lumia 520 SMS- when a contact has more than one nu...

Hi- when calling a contact who has more than one phone number it is easy to choose which of the numbers for that contact to use, but when sending SMS there is no option to choose. How does the SMS system decide which of the available numbers to use?
Solved!
Go to Solution.

If I do the following steps: Messaging > + >To + > Select contact > I see all numbers listed for the contact.
If I do instead: People > Contact > SMS, the number entered as "mobile" is selected by default. If you want to change it to "mobile2", you need to go: ... > switch number and select from there.

TS4123 This is not correct solution. I have fresh copy of Windows 7 64 bit and I have the same problem. Autorun only shows the Bonjour service. It started when try to sync more than one iphone.

This is not correct solution. I have fresh/new copy of Windows 7 64 bit and I have the same problem.
Autorun only shows the Apple Bonjour service. It started when try to sync more than one iphone over WiFi. I have two iphones and an iPad. I turned off syncing over WiFi and still has high CPU utilization. One of the CPU's is pegged at 100%. It is the AppleMobileDeviceService.exe process.

For the record, I then followed the suggestion of MarcDCMB in https://discussions.apple.com/thread/4291206 of just manually restarting the Apple Mobile Device service in Windows services.msc once each time after starting iTunes and the service no longer hogs CPU after that service restart. Not too painful as a work-around, and apparently an effective one, but clearly not a solution to the problem. Again, as above, all the other solutions didn't work for me and I have no conflicting software as far as I can tell. So you'd have to say this Apple's problem.
Also FTR, I am still on the 5.2.0.6 version of the Apple Mobile Device Support MSI and I don't know if that is relevant to this work-around working but my sense is that it is NOT relevant. I'll report back on this thread if I re-upgrade and the problem returns in spite of the service-restart approach.

How to add the rows formatted as table headings, Tables headings are repeated when a table spans more than one page.

Hi all,
i am facing problem while generating Test Result word document after successful execution of TestStand.
The Problem is :
i want to add rows Formatted as table headings, table headings are repeated when a table spans more than one page(marked as Red).
Example:
Page No. 1
|     Test case Number | Test Step number      |
|      100                         |            100                   |
Page No. 2
|     Test case Number | Test Step number      |
|      200                         |            300                   |
Test Result word document should generate with Table headings(marked as Red) in every pages of the document, but i am not getting as per above example.
Please through light on this.
Regards,
Susa.

Hi Santiago,
Thank you very much for your valuable reply.
i want to generate MS-word report for TestStand after successful testing using MS-word2000.
Test report contains Actual values, Expected values and Pass/Fail status.
In my program i have customized all fields i can able to generate test report which contains Verification engineer name , test mode, test date, start time, end time Actual values, Expected values and Pass/Fail status.etc....
To put all values of test case number, Test step number, Actual values, Expected values and Pass/Fail status in to table for each time, i will
insert a row into table every time values arrives, once the table exceedes its page size it moves to the next page, next page should start with table row header but it start with values of above said parameters.
so i'm not able to repeat table row header for each page.
Please find the attached file for your reference.
Attched file expected.doc :   This file contains what i wanted to generate MS-word report. Here table row header "Test Case Number and Test Step Number " is repeated in second page.
Attached file Actual output from source code.doc   : This report generated from the source code. Here table row header "Test Case Number and Test Step Number" is not repeated in second page.
Do you know any property to set "repeat as header row at the top of each page" using MS-word ActiveX in CVI/Labwindows.
i think this information is sufficient for you,
Still if you need some information please ask me.
Thanks
Susa.
Attachments:
Actual output from source code.doc ‏25 KB
expected.doc ‏26 KB

When I update applications more than one account appears. How do I delete second account

when I update applications more than one account appears. How do I delete second account?

I'm wondering if you have to Apples IDs or iTunes IDs and have puchased apps on both accounts.I have the same issue, and must supply both accounts' passwords in order to update apps. From my research here, there's no way to merge the two accouts. It is aggrivating, indeed.

Some apps stay open when trying to close more than one app at a time in ios 7

I tried closing down 2 or 3 app at a time in IOS7 and there's always one or two that stay open. The icon at the bottom is still there but I've already swiped it up to close it. When I go out of the closing function and come back I see that they are still open and I need to close them again. I tried this on many ipads, iPhones and ipod touch and they all act the same way.
Chris

I guess you didn't know, but yes you can close more than one app at a time. You can close up to 3 apps at a time in the new IOS7 on the iPhone. Try opening at least 3 apps and then double click the main button to see what apps are opened. Then swipe to the left to see the three of them on your screen. Your not gonna see the ones on the side entirely but you can still put all three fingers on them, then simply swipe them up and it closes them up.
The thing is, when you have let say 10 apps open, and you start using this trick, some of them will stay open meaning you swiped them up to close them down but the bottom icon stays there. When you come back to your main IOS desktop and then go back to close the programs that you have opened, you can see that those apps are still opened. There is only like 2 or three out of all the 10 you had opened that stayed open, but none the less it's a bug in the system I presume.
You also asked about the icon at the bottom. When you are seeing what apps are opened, there is always a small icon at the bottom and on top you have a representation of what you were working on, and that is the part you swipe up. But often time the bottom icon will stay opened after swiping 2 or 3 of the apps to close them.

Syncing Issues when trying too sync more than one thing

since the 8.0.2 update syncing has been real glitchy for me lately when i try too sync my iphone and ipod. for whatever reason, i cant sync more than one thing at the same time. for example if i have my iphone still plugged in, then plug in my ipod too update it, soon after the itunes would give me a unknown error then lock up. specifically this error. http://img407.imageshack.us/my.php?image=unknownituneserrorjq3.jpg
sometimes it would say iphone, sometimes it would say ipod.. that error would just depend on which was plugged in first.
its just weird, windows detects both drives fine. and if i have them in one at a time itunes will be able to read and sync that device. unless this is a direct problem with my computer which i dont think, i dunno. both devices work in any usb port. it just doesnt like them both being in at the same time.
this happening with anyone else?

See this support doc, iPod for Windows: Only works with one iPod at a time. The title pretty much says it all. If it's worked for you before then it's more likely by luck than design.
tt2

In Music, sometimes an album that has more than one artist, only one shows up, how do I get them all that are all on the album to play in sequence when I select that album?

I can't figure out why, on my ipod touch in Music, when I select some albums that have more than one artist, the whole album doesn't come up to play all together. This happens in some compilations, and only ne song shows up from each artist on the album. Or like on an artist's album that has someone else singing with her. I get that they are on the same line as an artist, but the album is an album, and when you play an album, the whole thing should play - right? Thanks for your help!

Generally all you need do is give tracks from the same album a common Album Artist. See Grouping tracks into albums. The images need an update but the basic info. still holds.
tt2

Reader X shuts down when trying to open more than one pdf, or when clicking certain categories in settings

Until a few weeks ago I have never had a problem opening more than one pdf at a time. Now Reader just shuts down when I try to do so. The same thing happens when I click on the yellow highlighted categories in settings. All the other categories open fine.
Appreciate the help of anyone who can help me solve this.

I guess you didn't know, but yes you can close more than one app at a time. You can close up to 3 apps at a time in the new IOS7 on the iPhone. Try opening at least 3 apps and then double click the main button to see what apps are opened. Then swipe to the left to see the three of them on your screen. Your not gonna see the ones on the side entirely but you can still put all three fingers on them, then simply swipe them up and it closes them up.
The thing is, when you have let say 10 apps open, and you start using this trick, some of them will stay open meaning you swiped them up to close them down but the bottom icon stays there. When you come back to your main IOS desktop and then go back to close the programs that you have opened, you can see that those apps are still opened. There is only like 2 or three out of all the 10 you had opened that stayed open, but none the less it's a bug in the system I presume.
You also asked about the icon at the bottom. When you are seeing what apps are opened, there is always a small icon at the bottom and on top you have a representation of what you were working on, and that is the part you swipe up. But often time the bottom icon will stay opened after swiping 2 or 3 of the apps to close them.

Problem with Query when I try to do more than one group

Hi Sap Experts,
Hopefully somebody can suggest a way to make my query work a bit better. I have built a stock warehouse query which prompt for item groupcode
see below
SELECT T1.[ItemCode] AS 'Item No.', T1.[ItemName] AS 'Item Description', T1.[BuyUnitMsr] AS 'Purchasing UoM', T1.[AvgPrice] AS 'Item Cost', T2.[OnHand] AS 'In Stock', T2.[OnHand] * T1.[AvgPrice] AS 'On-Hand Qty*Unit Price', T1.[PurFactor1] AS 'Purchasing Factor 1', T2.[OnHand] * T1.[PurFactor1] AS 'On-Hand*Purchase Factor', T2.[WhsCode] AS 'Warehouse Code', T3.[WhsName] AS 'Warehouse Name' FROM [dbo].[OITB] T0 INNER JOIN [dbo].[OITM] T1 ON T1.[ItmsGrpCod] = T0.[ItmsGrpCod]   INNER JOIN [dbo].[OITW] T2 ON T2.[ItemCode] = T1.[ItemCode]   INNER JOIN [dbo].[OWHS] T3 ON T3.[WhsCode] = T2.[WhsCode]   WHERE (T0.[ItmsGrpNam] >= (N'[%0]' ) ) AND (T0.[ItmsGrpNam] <= (N'[%1]' ) ) AND (T2.[OnHand] > (0 ) ) ORDER BY T2.[WhsCode]
At the moment this is working fine when I select to and from a group with the same ItemCode- however I now would like to to add 2/3 itemgroupcodes to the same query.
So at the moment if I run this - it promts for the Item Group Code - I enter the to/from itemcode - the query gives me a breakdown of the item group , warehouse location for that item and if there is stock on hand for each location
However I would like to be able to select 3 distinct Item groups but don't see to be able to when I adjust the query - can you add multiple parameter to add the 3 distinct itemgroup codes
If any one could suggest a way to alter the query to allow to choose 3/4 distinct groups either using the [%1] selections or simply built into the query that would be great
thanking you in advance for any suggestions you may have
Paul

Hi Gordan,
I have been playing with the query and the conclusion i have come to is this - this way works selecting one itemgroupcode
SELECT T1.[ItemCode] AS 'Item No.', T1.[ItemName] AS 'Item Description', T1.[BuyUnitMsr] AS 'Purchasing UoM', T1.[AvgPrice] AS 'Item Cost', T2.[OnHand] AS 'In Stock', T2.[OnHand] * T1.[AvgPrice] AS 'On-Hand Qty*Unit Price', T1.[PurFactor1] AS 'Purchasing Factor 1', T2.[OnHand] * T1.[PurFactor1] AS 'On-Hand*Purchase Factor', T2.[WhsCode] AS 'Warehouse Code', T3.[WhsName] AS 'Warehouse Name' FROM [dbo].[OITB] T0 INNER JOIN [dbo].[OITM] T1 ON T1.[ItmsGrpCod] = T0.[ItmsGrpCod]   INNER JOIN [dbo].[OITW] T2 ON T2.[ItemCode] = T1.[ItemCode]   INNER JOIN [dbo].[OWHS] T3 ON T3.[WhsCode] = T2.[WhsCode]   WHERE (T2.[OnHand] > (0 ) ) AND (T1.[ItmsGrpCod] = (N'130' ))
This query works by it self and selects the Item Group Code that I need to see.
However I can't seem to get it to work If I try to add a further group code? see code below
SELECT T1.[ItemCode] AS 'Item No.', T1.[ItemName] AS 'Item Description', T1.[BuyUnitMsr] AS 'Purchasing UoM', T1.[AvgPrice] AS 'Item Cost', T2.[OnHand] AS 'In Stock', T2.[OnHand] * T1.[AvgPrice] AS 'On-Hand Qty*Unit Price', T1.[PurFactor1] AS 'Purchasing Factor 1', T2.[OnHand] * T1.[PurFactor1] AS 'On-Hand*Purchase Factor', T2.[WhsCode] AS 'Warehouse Code', T3.[WhsName] AS 'Warehouse Name' FROM [dbo].[OITB] T0 INNER JOIN [dbo].[OITM] T1 ON T1.[ItmsGrpCod] = T0.[ItmsGrpCod]   INNER JOIN [dbo].[OITW] T2 ON T2.[ItemCode] = T1.[ItemCode]   INNER JOIN [dbo].[OWHS] T3 ON T3.[WhsCode] = T2.[WhsCode]   WHERE (T2.[OnHand] > (0 ) ) AND (T1.[ItmsGrpCod] = (N'130' )) AND (T1.[ItmsGrpCod] = (N'135' ))
It just seems to fail even though I know there is data for both groups - Have i missed something in the code?
I would like to be able to add 3 further group codes to the query as it will be for a report showing stock on hand once a month in the various locations
Any suggestion as to who to tweak the addtional groups
thanks
Paul

Subreports w/ CR10 only don't show when main report has more than 1 record

I use use Delphi7 and VCL CR10 to display report of 1 master table having 2 detail tables. The database is Interbase so I just use the TTX technology. I design a report to print master record at Detail A, and insert 2 subreports to print details records at Detail B & Detail C, and arrange the subreport links succesfullly. I make Detail C "New Page After" and put a Page Footer section to display some info of master record. I hope I can see a report w/ 1 master record followed by details records in one page.
I managed to pass data from Delphi to CR10 by assigning TCrpeDS.DataPointer of each table to TCrpe.Tables[x].DataPointer (after arranging TCrpe.Subreports[x], where x: 0..2). The report works well if I only print 1 record of master table. When I supply 2 or more record of master table w/ corresponding records of the 2 detal tables, then only the first page will print well, the following pages won't print Detail B & Detail C (can't show data of detail tables).
I try to detect the problem by changing the Record Selection Formula of each subreport to "true or <link condition>". Then again only the first page will print "all" details records (the "true or .." works), other pages will only print Detail A.
Please help me w/ this issue. I thank you in advance.
Regards,
Tjioe

VCL is not Java

Error messages when calling RSDRI_INFOPROV_READ for more than one time

Hello all,
I need to write a cube, however, before I do this I need to check whether there are already data in the target cube for a certain accounting period. This I do by reading the cube via FM RSDRI_INFOPROV_READ. The following coding is called from a running program after pushing a button on the screen.
<i>* clear internal tables.
      CLEAR gt_range.
      CLEAR gt_sfc.
*fill internal tables
      CLEAR ls_sfc.
      ls_sfc-chanm    = '0FISCPER'.
      ls_sfc-chaalias = '0FISCPER'.
      ls_sfc-orderby = 0.
      INSERT ls_sfc INTO TABLE gt_sfc.
      CLEAR ls_range.
      ls_range-chanm    = '0FISCPER'.
      ls_range-sign     = rs_c_range_sign-including.
      ls_range-compop   = rs_c_range_opt-equal.
      ls_range-low      = '2007001'.
      APPEND ls_range TO gt_range.
here I do not know what exactly to do with this flag
      lf_first_call = abap_true.
      CALL FUNCTION 'RSDRI_INFOPROV_READ'
        EXPORTING
          i_infoprov             = 'T01'
          i_th_sfc               = gt_sfc
          i_th_sfk               = gt_sfk
          i_t_range              = gt_range
          i_packagesize          = 1
        IMPORTING
          e_t_data               = lt_rd_cube
          e_end_of_data          = lf_eod
        CHANGING
          c_first_call           = lf_first_call
        EXCEPTIONS
          illegal_input          = 1
          illegal_input_sfc      = 2
          illegal_input_sfk      = 3
          illegal_input_range    = 4
          illegal_input_tablesel = 5
          no_authorization       = 6
          illegal_download       = 7
          illegal_tablename      = 8
          trans_no_write_mode    = 9
          inherited_error        = 10
          x_message              = 11
          OTHERS                 = 12.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
      lf_eod = abap_false.
      IF NOT lt_rd_cube IS INITIAL.
        RAISE target_data_found.
        EXIT.
      ENDIF.</i>
When testing with a period for which data already exists, it runs through quite perfectly. The return table is filled and I know that data exists and I EXIT.
However, if I press the button again (program is still running) I get an error message 'Nested call of RSDRI_INFOPROV_READ'. And this for each time I press the button.
So I thought I should clear the flag lf_first_call. After having done so I get an error message 'SQL Error'. Funny is that I get this error only every second time the Function Module is processed. Every other time it works perfectly.
How can I get rid of those error messages?
PLEASE - can anybody help me?
Many thanks in advance,
Thomas

Hi,
you have something like:
end_of_data = ' '.
first_call = 'X'.
WHILE end_of_data = ' '.
        CALL FUNCTION 'RSDRI_INFOPROV_READ'
          EXPORTING i_infoprov             = ....
                     i_th_sfc               = ...
                     i_th_sfk               = ...
                     i_t_range              = ...
                     i_reference_date       = ...
                     i_save_in_table        = ....
                     i_save_in_file         = ....
                     I_USE_DB_AGGREGATION   = ...
                     i_packagesize          = 100000
                     i_authority_check      = ...
          IMPORTING e_t_data               = .....
                     e_end_of_data          = end_of_data
          CHANGING   c_first_call           = first_call
          EXCEPTIONS illegal_input          = 1
                     illegal_input_sfc      = 2
                     illegal_input_sfk      = 3
                     illegal_input_range    = 4
                     illegal_input_tablesel = 5
                     no_authorization       = 6
                     ncum_not_supported     = 7
                     illegal_download       = 8
                     illegal_tablename      = 9
                     OTHERS                 = 11.
ENDWHILE.
hope this helps...
Olivier.

Is there a feature that allows the user to add another open field while completing a form? If I create one field to enter your child's name and social, is there an "add" button to create another field if the user has more than one child?

Name
Social Security
Child 1
Social 1
Child 2
Social 2

Hi blabla12345,
(untested and without warranty)
replace this line:
const sSaveCUBE = "CUBE";
with this:
const sSaveCUBE = "cube";
Have fun

Issue on Hyperion Report when we are showing more than one pivot section on

Hi All,
I am showing two pivots on the report section.
One pivot is having variable number of rows (let’s say P1) and other is having fixed number of rows (let’s say P2).
While creating the report section we are showing P2 below P1. (for any particular selection of filter P1 was having 5 rows including Total and P2 is having fixed number of rows.)
But while processing the report for any other filter selection the number of rows in P1 got increased and it got overlapped on P2 as P2 will not shift downwards when P1 expands.
Pivot behaves as images on report section so we are not having properties like scroll bar or any other control on report section for pivot.
Please suggest some action items to be done to overcome this problem.
Thanks in Advance.
Ujjawal

Thanks Stuart,
I am using Hyperion Interactive Reporting Studio version 9.3.1. I tried to get the functionality by the method described by you. But I was not able to get 'Position' from the property window. I am having 3 tabs in Properties window i.e. Border and Background, Picture and Alignment. In alignment i tried but it is only for text alignment.
Can you please elaborate your answer?

Stop displaying a message when button is pressed more than one

Hi
I have a forms with button 'save' and when user pressed this button i do some checks and display a message, what i want is to display the message only the first time user presses the button, if user presses the button again and again, message should not be displayed...but i do not know how to fix this, has someone an idea? Thanks.

Take a look at About Global Variables. You might also want to bookmark the Oracle Forms Documentation web site.
Basically, you will use a Global Variable as a counter. In your button code, you check the value of the Global Var to see if it is greater than 1. If it is, you exit. If it is not (in other words the Global is equal to zero) then you add 1 to the variable and you display your message. Pretty basic stuff.
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.

Auto creation of child requests when parent request has more than one group

Similar Messages

Maybe you are looking for