Lumia 520 SMS- when a contact has more than one nu...

Hi- when calling a contact who has more than one phone number it is easy to choose which of the numbers for that contact to use, but when sending SMS there is no option to choose. How does the SMS system decide which of the available numbers to use?
Solved!
Go to Solution.

If I do the following steps: Messaging > + >To + > Select contact > I see all numbers listed for the contact.
If I do instead: People > Contact > SMS, the number entered as "mobile" is selected by default. If you want to change it to "mobile2", you need to go: ... > switch number and select from there.

Similar Messages

Auto creation of child requests when parent request has more than one group

Hi,
I have created a request dataset which has a child form for AD Group. While raising a request, if I add more than one group, how to process the approval flow. Because I will be having different different approvers for different different groups. Is there any way to create child requests automatically when we submit a request with more than one group? I am using OIM 11.1.1.5.0.
I know in OIM 11g, whenever user raises request for more than one beneficiary/target-resource then OIM breaks that request into Child Requests. But this is not happening when I add more than one group in the same resource. Do I need to write my own code for DataValidator to split parent request into child requests upon validating child form? If so, is it going to impact the existing feature which is creating child request when parent has more than one user/resource.
Please let me know.

No not possible OOTB in current version. Check {thread:id=2318652} for more information.
-Bikash

SMS pick phone number randomly if the contact has more than 1 phone number

When sending SMS, it pick the phone number randomly if the contact has more than one phone numbers. SMS ignore the default phone number too. Anyone having the same issue?

You might try something like this:
INSERT INTO
    DUAL_TARGET
        PERSON_NO,
        FNAME,
        CNUM
SELECT
    PERSON_NO,
    FNAME,
    CASE
       WHEN COUNT(*) > 1 THEN
           NULL
       ELSE
           MAX(CNUM)
    END AS CNUM
FROM
    DUAL_DATA
WHERE
    CTYPE = 'cc'
GROUP BY
    PERSON_NO,
    FNAME;

TS4123 This is not correct solution. I have fresh copy of Windows 7 64 bit and I have the same problem. Autorun only shows the Bonjour service. It started when try to sync more than one iphone.

This is not correct solution. I have fresh/new copy of Windows 7 64 bit and I have the same problem.
Autorun only shows the Apple Bonjour service. It started when try to sync more than one iphone over WiFi. I have two iphones and an iPad. I turned off syncing over WiFi and still has high CPU utilization. One of the CPU's is pegged at 100%. It is the AppleMobileDeviceService.exe process.

For the record, I then followed the suggestion of MarcDCMB in https://discussions.apple.com/thread/4291206 of just manually restarting the Apple Mobile Device service in Windows services.msc once each time after starting iTunes and the service no longer hogs CPU after that service restart. Not too painful as a work-around, and apparently an effective one, but clearly not a solution to the problem. Again, as above, all the other solutions didn't work for me and I have no conflicting software as far as I can tell. So you'd have to say this Apple's problem.
Also FTR, I am still on the 5.2.0.6 version of the Apple Mobile Device Support MSI and I don't know if that is relevant to this work-around working but my sense is that it is NOT relevant. I'll report back on this thread if I re-upgrade and the problem returns in spite of the service-restart approach.

Error using JAX-WS to consume a WS that has more than one parameter

I am trying to create a web service proxy in JDeveloper using JAX-WS for an OAM web service from a WSDL (identity/oblix/WebServices/CompositeWebServices/WSDL/um_view_interface.wsdl). I received the following error when I try to run the proxy:
Exception in thread "main" com.sun.xml.ws.model.RuntimeModelerException: runtime modeler error: SEI test.profile.OblixIDXMLPortType has method oblixIDXMLUmView annotated as BARE but it has more than one parameter bound to body. This is invalid. Please annotate the method with annotation: @SOAPBinding(parameterStyle=SOAPBinding.ParameterStyle.WRAPPED)
at com.sun.xml.ws.model.RuntimeModeler.validateDocBare(RuntimeModeler.java:1267)
at com.sun.xml.ws.model.RuntimeModeler.processDocBareMethod(RuntimeModeler.java:1256)
at com.sun.xml.ws.model.RuntimeModeler.processMethod(RuntimeModeler.java:628)
at com.sun.xml.ws.model.RuntimeModeler.processClass(RuntimeModeler.java:416)
at com.sun.xml.ws.model.RuntimeModeler.buildRuntimeModel(RuntimeModeler.java:267)
at com.sun.xml.ws.client.WSServiceDelegate.buildRuntimeModel(WSServiceDelegate.java:715)
at weblogic.wsee.jaxws.spi.WLSProvider$ServiceDelegate.buildRuntimeModel(WLSProvider.java:427)
at com.sun.xml.ws.client.WSServiceDelegate.addSEI(WSServiceDelegate.java:703)
at com.sun.xml.ws.client.WSServiceDelegate.getPort(WSServiceDelegate.java:347)
at weblogic.wsee.jaxws.spi.WLSProvider$ServiceDelegate.getPort(WLSProvider.java:409)
at com.sun.xml.ws.client.WSServiceDelegate.getPort(WSServiceDelegate.java:330)
at com.sun.xml.ws.client.WSServiceDelegate.getPort(WSServiceDelegate.java:312)
at javax.xml.ws.Service.getPort(Service.java:92)
at test.profile.OblixIDXMLService.getOblixIDXMLPort(OblixIDXMLService.java:79)
at test.profile.OblixIDXMLPortClient.main(OblixIDXMLPortClient.java:23)
Process exited with exit code 1.
It seems like the OAM web service (um_view_interface.wsdl) is not WS-I BP 1.1 compliant. It expects two elements under the body. WS-I BP 1.1 specifies that there should be only one child in the body of the element.
The expected request body would look like this, there are two elements under the body:
<soapenv:Body>
<authentication xmlns="http://www.oblix.com/">
<login>loginname</login>
<password>pass</password>
<domain>dc=test,dc=org</domain>
</authentication>
<request application="userservcenter" function="view" mode="dataonly" version="NPWSDL1.0" xmlns="http://www.oblix.com/OblixXMLLocalSchema">
<params xmlns="">
<ns1:uid xmlns:ns1="http://www.oblix.com/">cn=tester,cn=Users,dc=test,dc=org</ns1:uid>
</params>
</request>
</soapenv:Body>
Has anyone encountered the similar problem? Is there a solution to this problem?
Your help is appreciated!

Can u pls share ur solution if u have found a way 2 create a web service with 2 ports.I have not yet found a solution so far and nobody reacted to all my posts in the different fourms. It seems nobody is implementing web services with two ports using the EJB annotations technology.

VLD-0201:Table has more than one primary key

hi
i'm working with OWB 9.2,I was imported the table from database,when i validating that it is giving message:
VLD-0201:Table has more than one primary key
vld-0209:Duplicate unique key i.e:cust_acc and SYS_C00435 detected.
Can i use this table and generate the mapping with out any errors?
Any help will be very generate.

Hi Ashok,
I'm quite curious how you managed to get a table with 2 PK's.
I tried it myself:
=======================================================
SQL>create table x(c1 number constraint pk1 primary key,c2 number constraint pk2 primary key, c3 date);
create table x(c1 number constraint pk1 primary key,c2 number constraint pk2 primary key, c3 date)
ERROR at line 1:
ORA-02260: table can have only one primary key
SQL>ed
Wrote file afiedt.buf
1* create table x(c1 number constraint uk1 unique,c2 number constraint uk2 unique, c3 date)
SQL>/
Table created.
=====================================================
As you can see, trying to create a table with more than 1 PK is impossible. With Unique Key, that IS possible (see second example).
I don't expect mappings to function properly with such an error message.
Is it possible for you to drop the table in the database, correct the definition of the table in OWB and then deploy that corrected version to the database?
If on the other hand the table on the database is correct (i.e. has only one PK) then the import into OWB obviously did not go well and I'd suggest you drop the imported definition and try to import it again.
Cheers, Patrick

How to add the rows formatted as table headings, Tables headings are repeated when a table spans more than one page.

Hi all,
i am facing problem while generating Test Result word document after successful execution of TestStand.
The Problem is :
i want to add rows Formatted as table headings, table headings are repeated when a table spans more than one page(marked as Red).
Example:
Page No. 1
|     Test case Number | Test Step number      |
|      100                         |            100                   |
Page No. 2
|     Test case Number | Test Step number      |
|      200                         |            300                   |
Test Result word document should generate with Table headings(marked as Red) in every pages of the document, but i am not getting as per above example.
Please through light on this.
Regards,
Susa.

Hi Santiago,
Thank you very much for your valuable reply.
i want to generate MS-word report for TestStand after successful testing using MS-word2000.
Test report contains Actual values, Expected values and Pass/Fail status.
In my program i have customized all fields i can able to generate test report which contains Verification engineer name , test mode, test date, start time, end time Actual values, Expected values and Pass/Fail status.etc....
To put all values of test case number, Test step number, Actual values, Expected values and Pass/Fail status in to table for each time, i will
insert a row into table every time values arrives, once the table exceedes its page size it moves to the next page, next page should start with table row header but it start with values of above said parameters.
so i'm not able to repeat table row header for each page.
Please find the attached file for your reference.
Attched file expected.doc :   This file contains what i wanted to generate MS-word report. Here table row header "Test Case Number and Test Step Number " is repeated in second page.
Attached file Actual output from source code.doc   : This report generated from the source code. Here table row header "Test Case Number and Test Step Number" is not repeated in second page.
Do you know any property to set "repeat as header row at the top of each page" using MS-word ActiveX in CVI/Labwindows.
i think this information is sufficient for you,
Still if you need some information please ask me.
Thanks
Susa.
Attachments:
Actual output from source code.doc ‏25 KB
expected.doc ‏26 KB

An operation has more than one setup activity-error message

Hi All,
I have a queue which is failing and giving error message "An operation has more than one setup activity".
I have debugged it but of no use.
In SAP R3 planned order data is created and is being sent to APO system through a CIF interface in queue.
In APO system,planned order data is integrated to process order,during this they are getting the subject mentioned error.
Kindly help me how to rectify this error.
Please help...Thanks in advance.

Hi,
Back again...hopefully below should solve your issue.
Check if any of the co-product (of the main assembly) has GR processing time. Are there any phantom component in the BOM, if yes, please check the co-products in phantom assembly as well.
Any co-products /phantom assembly should be assigned to APO related Produce phase.
Otherwise, you can remove the GR processing time for co-products (make it zero) and sync the master data and then try.
This should solve the issue.
Let know if this helps.
Regards,
NR

Material has more than one plant, only show the price for the first on

Hi:
I am having the standard price for the material with the different plants ,I am seeing only one Material and Standard price(if a material has more than one plant, only show the price for the first one In the report ):
plant :de87 Material: 60020601 Standard price: 1237.00
plant:PT01 Material :60020601 Standard price: 634.00
In the report I am seeing DE87 with the standard price :1237.00 .
I am extracting from the 0MATERIAL_ATTR
Please help me how can I display all plants with the material and std price. In my data source there is no PLANT
rgrds
Kumar

Hi:
Report is running on 0MATERIAL(Transactional master data),Data sourc: 0MATERIAL_ATTR,
We are having the standard price in the 0MATERIAL ,(Standard price is combination of plant and Material) .Plant is not available in the material,so in the report its displaying only first result
plant :de87 Material: 60020601 Standard price: 1237.00 --->Displaying this
plant:PT01 Material :60020601 Standard price: 634.00
In the above we are having the same material but different plant and different standard price. so I need to display the both in the report.
Rgrds
kumar

JSR-75 PIM API creating Contact with more than one Number (Phone,Fax ...)

Hi everybody
I try to create a contact with more than one Phonenumber using the method contact.addString(...) .
Contact with one single number is no Problem but contacts with more than one Number are ignored and are not stored to the phonebook. I try to add the Numbers using a for -loop. Is there an other way to solve this Problem?
please Help.
Thank You.

Wonder if you have made any progress - if so,
could you share ?

How do I share my contacts with more than one group? I really don't want to have re-type them into a different group. Help!

How do I share my contacts with more than one group without having to re-type them into each group?

Without "pretending" to be yourself on the other phone (change settings) there's nothing else you can do.
iOS devices are meant to be single user and can't view iCloud.com the same way a Mac or PC can do.
You need to find a desktop or laptop machine (Mac or PC) to log in at iCloud.

When I update applications more than one account appears. How do I delete second account

when I update applications more than one account appears. How do I delete second account?

I'm wondering if you have to Apples IDs or iTunes IDs and have puchased apps on both accounts.I have the same issue, and must supply both accounts' passwords in order to update apps. From my research here, there's no way to merge the two accouts. It is aggrivating, indeed.

What do I do if one contact I need to enter has MORE THAN ONE ADDRESS

What if I want to enter someone's home and work address under the same card? Can I do that? Or if someone has a summer house... Can I put more than one address under the same card and name?

Can I put more than one address under the same card and name?
Yes, but you can only send email to one of those addresses when you use that contact. That is, you have to pick a default address for the card when you send an email to that person or company.
Mulder

In Music, sometimes an album that has more than one artist, only one shows up, how do I get them all that are all on the album to play in sequence when I select that album?

I can't figure out why, on my ipod touch in Music, when I select some albums that have more than one artist, the whole album doesn't come up to play all together. This happens in some compilations, and only ne song shows up from each artist on the album. Or like on an artist's album that has someone else singing with her. I get that they are on the same line as an artist, but the album is an album, and when you play an album, the whole thing should play - right? Thanks for your help!

Generally all you need do is give tracks from the same album a common Album Artist. See Grouping tracks into albums. The images need an update but the basic info. still holds.
tt2

Syncing Issues when trying too sync more than one thing

since the 8.0.2 update syncing has been real glitchy for me lately when i try too sync my iphone and ipod. for whatever reason, i cant sync more than one thing at the same time. for example if i have my iphone still plugged in, then plug in my ipod too update it, soon after the itunes would give me a unknown error then lock up. specifically this error. http://img407.imageshack.us/my.php?image=unknownituneserrorjq3.jpg
sometimes it would say iphone, sometimes it would say ipod.. that error would just depend on which was plugged in first.
its just weird, windows detects both drives fine. and if i have them in one at a time itunes will be able to read and sync that device. unless this is a direct problem with my computer which i dont think, i dunno. both devices work in any usb port. it just doesnt like them both being in at the same time.
this happening with anyone else?

See this support doc, iPod for Windows: Only works with one iPod at a time. The title pretty much says it all. If it's worked for you before then it's more likely by luck than design.
tt2

Lumia 520 SMS- when a contact has more than one nu...

Similar Messages

Maybe you are looking for