Auto-expire from query based on date

I have some records in my MySQL db that contain dates for upcoming events.. I need a way to query upcoming events and expire them from the query once the date passes without necessarily deleting them from the database. (I'm publishing the next 5 upcoming events to the homepage via 'LIMIT 5').
Is there an easy way to do this within a MySQL db query? This section of the site (both insert record, display, current query, etc) is all created with ADDT.
Please let me know!
Thanks!

Hi Nathan,
I reckon you´d just need to display those events which come later than what MySQL calls "CURDATE()"
(aka "current date") -- so a query like...
SELECT * FROM tablename WHERE CURDATE() > 'datefield'
...should filter the past dates. Works ??
Cheers,
Günter Schenk
Adobe Community Expert, Dreamweaver

Similar Messages

Query based on date partition

Hi,
I am trying to output only a successful job during the past 24 hrs of each day. If there is job that has an outcome of a success and a failure within the last
24 hrs for each day, I want to only output the successful one. If there are no success for the same job, I will output the last attempted failed job.
Here are my columns:
current output:
JOB_ID     JOBDATE               GROUP     PATH          OUTCOME          FAILED     LEVEL     ASSET
3400908     7/27/2012 10:01:18 AM     polA     target1          Success          0     incr     clone1
3400907     7/27/2012 10:01:09 AM     polA     target1          Failed          0     incr     clone1
3389180     7/23/2012 10:01:14 AM     polA     target1          Failed          1     incr     clone1
3374713     7/23/2012 10:01:03 AM     polA     target1          Success          0     incr     clone1
3374712     7/22/2012 11:24:32 AM     polA     target1          Success          0     Full     clone1
3367074     7/22/2012 11:24:00 AM     polA     target1          Failed          1     Full     clone1
3167074     7/21/2012 10:01:13 AM     polA     target1          Success          0     incr     clone1
336074     7/21/2012 10:01:08 AM     polA     target1          Success          0     incr     clone1
desired output:
JOB_ID     JOBDATE               GROUP     PATH          OUTCOME          FAILED     LEVEL     ASSET
3400908     7/27/2012 10:01:18 AM     polA     target1          Success          0     incr     clone1
3374713     7/23/2012 10:01:03 AM     polA     target1          Success          0     incr     clone1
3374712     7/22/2012 11:24:32 AM     polA     target1          Success          0     Full     clone1
3167074     7/21/2012 10:01:13 AM     polA     target1          Success          0     incr     clone1
Here is a code I am trying to use without success:
select *
from
   (selectjob_id, jobdate, group, path, outcome, Failed, level, asset,
          ROW_NUMBER() OVER(PARTITION BY group, path, asset ORDER BY jobdate desc) as rn
               from job_table where jobdate between trunc(jobdate) and trunc(jobdate) -1 )
   where rn = 1
   order by jobdate desc;Thanks,
-Abe

Hi, Abe,
You're on the right track, using ROW_NUMBER to assign numbers, and picking only #1 in the main query. The main thing you're missing is the PARTITION BY clause.
You want to assign a #1 for each distinct combination of group_id, path, asset and calendar day , right?
Then you need to PARTITION BY group_id, path, asset and calendar day . I think you realized that when you named this thread "Query Based *on date partition* ".
The next thing is the analytic ORDER BY clause. To see which row in each partition gets assigned #1, you need to order the rows by outcome ('Success' first, then 'Failed'), and after that, by jobdate (latest jobdate first, which is DESCending order).
If so, this is what you want:
WITH     got_r_num     AS
     SELECT j.*     -- or list columns wanted
     ,     ROW_NUMBER () OVER ( PARTITION BY group_id     -- GROUP is not a good column name
                               ,                    path
                         ,             asset
                         ,             TRUNC (jobdate)
                               ORDER BY         CASE outcome
                                             WHEN 'Succcess'
                                     THEN 1
                                     ELSE 2
                                         END
                         ,             jobdate     DESC
                       )      AS r_num
     FROM    job_table j
     WHERE     outcome     IN ('Success', 'Failed')
--     AND     ...     -- Any other filtering, if needed
SELECT     *       -- or list all columns except r_num
FROM     got_r_num
WHERE     r_num     = 1
;If you'd care to post CREATE TABLE and INSERT statements for the sample data, then I could test it.
It looks like you posted multiple copies of this thread. I'll bet that's not your fault; this site can cause that. Even though it's not your fault, please mark all the duplicate versions of this thread as "Answered" right away, and continue in this thread if necessary.
Edited by: Frank Kulash on Jul 28, 2012 11:47 PM
This site is flakier than I thought! I did see at least 3 copies of this same thread earlier, but I don't see them now.

Select Query Based on date condition

Hi ,
Is it Possible.
i want to run select query based on date condition.
Eg...
if the date between 01-jan-01 and 01-jan-05 then
select * from table1;
if the date between 02-jan-05 and 01-jan-08 then
select * from table2;
Becaz i have data in 2 diffrent tables , based on the date condition i wnt to run the select statement to diffrent tables.
i dont want plsql here Just SQL needed.
thanks,
-R
Edited by: infant_raj on May 5, 2009 11:48 PM

Helo Kanish,
this is not the one i was asking..
wht i mean was .
i use bind variable to get date while running the select statement , once i get the date then i want to choose any one of the table to run select query.
EG..
select col1,col2 from table1 where date between only if 01-jan-01 and 01-jan-05;
select col1,col2 from table2 where date between only if 02-jan-05 and 01-jan-08;
Run any one of the two . not all
thanks,
_raj

Creating Data Driven Subscription does not allow me to get Auto copy from Query.

I am trying to create a data driven Subscription for sharepoint document Library. I have a table I populate with values. Then a stored procedure that exec and returns the values. I use this in my data driven subscription.
Here is what my table looks like
intSubscriptionID strSubscriptionName strFileName strPath strRenderFormat strWriteMode strFileExt strTitle strAutoCopy strUserName strPassword strVar1 strVar2 strVar3 strVar4 strVar5 strVar6 strVar7 strVar8 strVar9 strVar10 bitEnabled
400 Billing - Invoice_ParentChildRollup 19_Jan2015 http://eagleviewportal/BusinessIntelligenceCenter/AccountingBI/Reports/New Excel Overwrite True Invoice_ParentChildRollup False NULL NULL 0000019 NULL NULL NULL NULL NULL NULL NULL NULL NULL 1
401 Test Daily Order and Pending Status by SubAccount Test Daily Order and Pending Status by SubAccount http://eagleviewportal/BusinessIntelligenceCenter/ClientRelationsBI/Reports/New Excel Overwrite True Test
Daily Order and Pending Status by SubAccount True NULL NULL 152884 NULL NULL NULL NULL NULL NULL NULL NULL NULL 1
I can use all the values and it creates my subscription no problem as long as I do not try to use the autocopy.
If I select Use no Value all works great.
If I select Specify a static Value and then choose True it gives me an error The AutoCopy Delivery setting cannot be set to True if the WriteMode Delivery setting is not set to Overwrite. as you can see that value is set to overwrite. If I use
hard coded word OverWrite instead of getting it from query it works.
If I do the same step above but select False it seems to work as well.
If I try to choose the value from the query then it errors with the generic Sorry Something went wrong. I cannot find any value in url logs.
Ken Craig

Hi Ken,
I have reproduced the same issue as you encountered. If you choose both value for the fields(WriteMode and AutoCopy) from query, SharePoint will result in an error page. I finally fixed the issue by manually updating the table
dbo.Subscriptions from the reporting service database. To make this, please first copy the value of field
ExtensionSettings from the subscription table.
Change the WRITEMODE and AUTOCOPY from "<ParameterValue><Name>WRITEMODE</Name><Value>Overwrite</Value></ParameterValue> <ParameterValue><Name>AUTOCOPY</Name><Value>AutoCopy</Value></ParameterValue>"
to "<ParameterValue><Name>WRITEMODE</Name><Field>strWriteMode</Field></ParameterValue> <ParameterValue><Name>AUTOCOPY</Name><Field>strAutoCopy</Field></ParameterValue>".
Here Value means the static value, and field means the name of the query field. After you modify it, copy the settings back to field
ExtensionSettings or use update SQL to update it.
At last, your data driven subscription should be like this:
Thanks,
Reken Liu

Query based on date

Have you guys ever tried to write a query based on CMP?
The EJB QL is:
select object(a) from ActionItems as a where a.duedate = ?1
When I deployed it to OC4J, I got the following error:
Error compiling D:\oc4j903\j2ee\home\applications\biogen/biogen.jar: Error trans
lating EJBQL: Invalid type for expression (a.dueDate = ?1)
EJB QL statement : 'select object(a) from ActionItems as a where a.dueDate = ?1'
EJB QL method : public abstract java.util.Collection ActionItemsLocalHome.findByDueDate(java.sql.Date) throws javax.ejb.FinderException
Auto-deploying file:/D:/oc4j903/j2ee/home/applications/biogen/biogen/ (Assembly
had been updated)...
So, any query that is based on date will not work for OC4J, is this a bug or what?
Thanks for the reply.
Jingzhi

I would post this question (and your date range question) to the J2EE group. More J2EE/EJB specific questions are answered there.
To my understanding the standard ejb2.0 specification is weak in date comparisons for queries. I believe you need to add your date queries to your application server specific orion-ejb-jar.xml file. I'm not sure of how, I would post that question to the J2EE forum, or look it up in the 9ias documentation.
-Mark

Query based on Dates

Hi,
There are two :p1_start and :p2_end bind variable
If the above two bind variables are null it must show all the data.
if two bind variables are not null then it will show the dates between two date pickers.
select actual_end,status from schedule
where
actual_end is between to_date(:p1_start) and to_date(:p1_end)
Please suggest me in modifying the query.
Thanks
Sudhir

I disagree with using notional start and end dates and agree with Roel that the column should be equated to itself instead.
However using NVL may negate the index on the column, so I would suggest this instead (logically its the same as Roel's suggestion though)...
SELECT *
FROM   my_table
WHERE date_col BETWEEN CASE WHEN TO_DATE(:P_STARTDATE) IS NULL
                             THEN date_col
                             ELSE TO_DATE(:P_STARTDATE)
                        END
                AND
                        CASE WHEN TO_DATE(:P_ENDDATE) IS NULL
                             THEN date_col
                             ELSE TO_DATE(:P_ENDDATE)
                        ENDCheers
Ben

Query Based on Date & Time Range

Hello Users,
There is a requirement to display weekly report from saturday 8:00 AM to previous saturday 08:00 AM.
I have a table "Downtime"
IPADDRESS First Occurrence Last Occurrence Downtime
172.29.10.12 31-JUL-10 08:12:50 01-AUG-10 09:00:00 1
172.29.11.54 01-AUG-10 11:12:00 01-AUG-10 01:10:00 3
172.29.58.7 07-AUG-10 04:10:00 07-AUG-10 05:00:00 2I will not have problem when I run the report on saturday as I can give condition as sysdate - 7.
First problem is how will I default to 8 AM.
Second if the report is run on sunday or in between before next saturdya I have to query the records only from satuday 8 AM to previous saturday 8 AM.
Can anyone please help me on this?
Thanks.
Ravi.

Hi,
hoek wrote:
That's a great hint, Solomon, thanks.
I always end up getting frustrated because trunc on a date returns a NULL for 'midnight'....and the ability to perform date arithmetic is gone all of a sudden. Why isn't Oracle just resetting to '00:00:00' when truncating a date, I wonder?I must not understand what you're asking.
It sounds as if you're saying that TRUNC (dt) sometimes returns something that is NULL (or somehow partially NULL), but I'm sure you don't really think that.
For other readers who may be wondering:
TRUNC (dt), where dt is a DATE (and not NULL) , always returns a DATE, and DATEs always have a time. Either the whole DATE is NULL or none of it is; you can't have a year-month-day in a DATE column and not have a time, or have a NULL time.
TRUNC(dt, x) may return a DATE where the time is not midnight, but only if x is a format string like 'MI' that specifies an interval less than a day. When x indicates a longer interval (e,g, 'IW'), or when x is omitted, the time is always midnight. In any event, you can do date arithmetic on the results.
I'm sure you understand this, but your question makes it sound like you don't.
This should illustrate my point:
-- generating hours, starting 14 days ago:
with t as (
select trunc(sysdate-14)+ level/24-1 dt
from dual
connect by level <= 24*14
-- querying generated data:
select dt
--, trunc(dt,'iw') - 5/3 -- great workaround, but why can't we just work with 00:00:00 for the time component?
from t;
-- generating hours, starting 14 days ago:
with t as (
select trunc(sysdate-14)+ level/24-1 dt
from dual
connect by level <= 24*14
-- querying data between saturday and previous saturday
-- from the same resultset and 'it doesn't work'
select dt
from t
where dt between trunc(dt-7)+8/24 and trunc(sysdate)+8/24;
Is this a parody of a poorly written question?
Are you trying to make the point that no one should ever say "it doesn't work" without explaining exactly what doesn't work, and what the expected output is?
I get the same 336 rows when I run either of the queries above.
As you've often said, posters should always show exactly what results they want.

VERY URGENT:Query based on data passed by Button event

Hiiiiiiiiiiii friends...
I am new to fwk, and its very hard time to me,please help..
I have 2 pages. On first page I am going to enter Pid, then by selecting FIND button I want to execute query for 2nd page for that Pid and get details.
I have 2 COs.
For calling page it is as....
public void processFormRequest(OAPageContext pageContext, OAWebBean webBean)
super.processFormRequest(pageContext, webBean);
if (pageContext.getParameter("FIND") != null)
String PerNum = pageContext.getParameter("PersonId");
OAApplicationModule am = pageContext.getApplicationModule(webBean);
Serializable[] parameters = { PerNum };
am.invokeMethod("initDetails",parameters);
pageContext.setForwardURL("OA.jsp?page=/NEW_PAGE/oracle/apps/PER/person/webui/detailsPG",
null,
OAWebBeanConstants.KEEP_MENU_CONTEXT,
null,
null,
true, // Retain AM
OAWebBeanConstants.ADD_BREAD_CRUMB_YES,
OAWebBeanConstants.IGNORE_MESSAGES);
and for 2nd CO i have..
public void processRequest(OAPageContext pageContext, OAWebBean webBean)
super.processRequest(pageContext, webBean);
String PerNum = pageContext.getParameter("PersonId");
OAApplicationModule am = pageContext.getApplicationModule(webBean);
Serializable[] parameters = { PerNum };
am.invokeMethod("initDetails",parameters);
and initquery and initDetails methods are written on VOIMPL and AMIMPL classes respectivly...
I have used only one VO.
but i unable to pass Pid to second page so that I get result.
Please help me.....
Thanks
Message was edited by:
Madhav_gharge
Message was edited by:
Madhav_gharge

The parameters are not correct in your setForwardURL method. Use either
public void setForwardURL(String functionName,
byte menuContextAction,
String menuName,
com.sun.java.util.collections.HashMap parameters,
boolean retainAM,
String addBreadCrumb,
byte messagingLevel)
or
public void setForwardURL(String url,
String functionName,
byte menuContextAction,
String menuName,
com.sun.java.util.collections.HashMap parameters,
boolean retainAM,
String addBreadCrumb,
byte messagingLevel)
--Shiv

Query based on a date range

I want to query based on a date range. I wrote the following EJB QL:
"select object(a) from ActionItems as a where a.dueDate
between ?1 and ?2"
But when I deployed the application to Oracle's EJB server, I got the following error:
Auto-deploying biogen.jar (No previous deployment found)... Invalid type for expression (a.dueDate BETWEEN ?1 AND ?2)
EJB QL statement : 'select object(a) from ActionItems as a where a.dueDate between ?1 and ?2'
EJB QL method : public abstract java.util.Collection ActionItemsLocalHome.findByDueDateRange(java.sql.Date,java.sql.Date) throws javax.ejb.FinderException
at com.sun.ejb.ejbql.parser.EjbQLParser.parse EjbQLParser.java:218)
at com.sun.ejb.ejbql.EjbQLDriver.parse(EjbQLDriver.java:86)
at com.sun.ejb.sqlgen.SQLGenerator.generateSQLForEjbQLQueries(SQLGenerator.java:704)
It works fine for a number range, but does not work for a date range.
Any one has an idea on how to write a correct EJB QL for a query based on date range?
Thanks.
Jingzhi

Re-posted. Please help!

MDX calculation based on date logic for the Jan 1 of current year through the 15th of the previous month

Hello,
We need some help with an SSAS MDX query based on date logic. One of the problems is that I don't have access to the Cube but have been given a query example with the logic needed for the calculation. Here's the scenario;
The ETL process will run on the first Tuesday after the 15th of a given month. The Analysis Cube data queried should include the current year up to the end of the previous month. For example, on May 19th
(the first Tuesday on or after the 15th) the query should include data from January 1st through April 30th.
The 15th of the month is not part of the query, it is a factor in when the query is run. The query will always be in terms of complete months.
SELECT
 NON EMPTY { [Measures].[Revenue Amount],
 [Measures].[Utilization],
 [Measures].[AVG Revenue Rate],
 [Measures].[Actual Hours] }
ON
 COLUMNS,
 NON EMPTY { ([dimConsultant].[User Id TT].[User Id TT].ALLMEMBERS * [dimConsultant].[Full Name].[Full Name].ALLMEMBERS * [dimConsultant].[Employee
Type].[Employee Type].ALLMEMBERS ) } DIMENSION PROPERTIES MEMBER_CAPTION,
 MEMBER_UNIQUE_NAME
ON
 ROWS
FROM
 ( SELECT
( { [dimDate].[Week Date].[1/4/2015], [dimDate].[Week Date].[1/11/2015], [dimDate].[Week Date].[1/18/2015], [dimDate].[Week Date].[1/25/2015], [dimDate].[Week Date].[2/1/2015] } )
 ON
 COLUMNS
 FROM
 ( SELECT
( { [dimIsBillable].[Is Billable].&[True] } )
 ON
COLUMNS
 FROM
[SSASRBA]
WHERE
 ( [dimIsBillable].[Is Billable].&[True], [dimDate].[Week Date].CurrentMember ) CELL PROPERTIES VALUE,
 BACK_COLOR,
 FORE_COLOR,
 FORMATTED_VALUE,
 FORMAT_STRING,
 FONT_NAME,
 FONT_SIZE,
 FONT_FLAGS

Hi Hans,
Thank you for your question.
I am trying to involve someone more familiar with this topic for a further look at this issue. Sometime delay might be expected from the job transferring. Your patience is greatly appreciated.
Thank you for your understanding and support.
Regards,
Simon Hou
TechNet Community Support

How to calculate a boolean based on data from a table fed by a BI Query

Hi Gurus,
I am currently struggling with the following issue:
- I have a query in my VC model wich returns 4 ratios
- I put the result of the query in a table in the VC model
- then, I added a column in the table. this column is a boolean which should be true if the value of one of my 4 ratios is not 0, otherwise, it is false
- I want that boolean to be "updatable" by the users.
I tried to define the default value of the boolean based on the value from the signficant ratio... no luck
I tried to change the value from the configuration tab of the column, but then I can not update afterwards....
Has anyone ever seen that issue and found a solution ?
Thansk for your help
PY

Hi Deep!
Thanks for your feedback! I felt a bit alone in my world before you answered
Your idea is great and it would work if I hadn't to display the data with a hierarchy.
Actually, the only thing I did not mention is that we are posting data against fiscal period, and we are budgeting for the next 10 years (no comment on that, and the precision we could reach ). So, to display the information we are using a cusomized hierarchy on 0FISCPER using 0FISCYEAR.
So when I used your option, the hierarchy has been deactivated on the table. But to be sure I correctly implemented your proposition, here are the steps we used :
1) connect the query output port "data" to the share
2) add the boolean in the share
3) map the boolean with the rule based on the data coming from the query
4) connect the share to the table.
Note that we the current version we use of VC I am not able to edit the field mapping between the share and the table...
Did I miss something ?
If yes, could you drive me to the correct procedure ?
If no, would you have any idea ? I already tried to change the default value of the field in the "define Data" maintenance popup of the table. I also tried to assign a value to the boolean based on the Action option of the column used in my condition...
Thanks for your help
PY

How to fetch data from bseg based on 2 internal tables in 1 select query?

hi,
i have bukrs and belnr in one internal table and bukrs and vbeln in another internal table..now if i select from bseg twice using for all entries for fields bukrs vbeln and bukrs belnr twice in 2 select statements its fine..but since bseg is a huge table i want to use select only once..but the problem is that none of the belnrs in the one internal table will have vbeln in another internal table....ie if vbeln is selected from bseg based on belnr in 1 internal table non eof those vbeln will be equal to vbeln on another internal tables..in this scenario even if i take all data from two internal tables into 1 single internal table and then use for all entries on vbeln and belnr of that table ..but i think this will not work because and AND operator will not work because no record will satisfy both vbeln and belnr conditions..even if i use OR operator if the 1st condition satisfies the select clause will not enter into the second clause and all the records will not be fetched...Please help how should i tackle this..

Hi vijaya,
no simple select statement solution so far.
As BSEG is a huge table you should try to get the full key values into another internal table first.
SAP avoids direct selections from BSEG.
Pleas consider the use of one of the secondary index tables first:
      BSAD : Accounting: Secondary Index for Customers (Cleared Items)
      BSAK : Accounting: Secondary Index for Vendors (Cleared Items)
      BSAS : Accounting: Secondary Index for G/L Accounts (Cleared Item
      BSEC : One-Time Account Data Document Segment
      BSEG : Accounting Document Segment
      BSID : Accounting: Secondary Index for Customers
      BSIK : Accounting: Secondary Index for Vendors
      BSIS : Accounting: Secondary Index for G/L Accounts
you may include
      BKPF : Accounting Document Header
for restrictions about time and document type.
The last step is a FOR ALL ENTRIES selection from BSEG providing the full key values.
Although you may have even more selects, the overall performance will be much better.
Regards,
Clemens

Query based taxonomy from scratch gives NoSuchMethodError...

I'm trying to create a query based taxonomy following the instuctions specified in the help docs: KM Platform -> Admin Guide -> Content Mgmt -> Taxonomies and Classification -> Creating a QBT -> from scratch. I created an index on a newly created (hence empty) folder in the 'documents' repository. So, essentially, the data source points to that folder. Also, I selected 'TREX Classification' on the 'Service' drop-down while creating the index. I left the crwler profile as blank. Then I went on to create a new 'Query Based Taxonomy'. I was able to create it alright, but as soon as I click on it to add folder and the such, I get this error:
java.lang.NoSuchMethodError
     at com.sapportals.wcm.repository.manager.taxonomy.TaxonomyNamespaceManager.getDocumentTaxRMRids(TaxonomyNamespaceManager.java:1876)
     at com.sapportals.wcm.repository.manager.taxonomy.TaxonomyNamespaceManager.getTaxonomyClassResources(TaxonomyNamespaceManager.java:1831)
     at com.sapportals.wcm.repository.manager.taxonomy.TaxonomyNamespaceManager.addChildDocuments(TaxonomyNamespaceManager.java:1942)
     at com.sapportals.wcm.repository.manager.taxonomy.TaxonomyNamespaceManager.getChildren(TaxonomyNamespaceManager.java:368)
     at com.sapportals.wcm.repository.CollectionImpl.internalGetChildren(CollectionImpl.java:966)
     at com.sapportals.wcm.repository.CollectionImpl.getChildren(CollectionImpl.java:179)
Any help in solving this is highly apprecaited.
We run EP6 SP2.
I did NOT create a 'crawler profile' for this set up.
thanks,
Biju.

Hi Biju,
re. your NW'04 SP stack 4 migration intention:
NW'04 is still in ramp-up (SP stack 4 is the current shipment bundle of it) so at the current point in time, only participating ramp-up customers can use it.
A migration from EP6.0 SP2 to NW'04 will be possible (but not during the ramp-up phase).
From a Knowledge Management & Collaboration perspective, we will port most of the NW'04 SP stack 4 functions to EP6.0 SP2 as well. These functions will be shipped as EP6.0 SP2 Patch 5 (planned shipment date beginning of Q4 / 2004) so for mid-term, you can also plan to stay on EP6.0 SP2 if you have no other pressing reasons for going to NW'04 (e.g. enhanced Web AS functions).
This feature porting from NW -> EP6.0 SP2 is an 'only-once' action, however, and NetWeaver will be the release for new features in the future.
Regards,
Joerg

PLD Report does not show data from Query

Hello,
SAP b1 9.0 PL08 on MSSQL 2008 and I get data on the query, but when the PLD prints, it shows nothing. Is there a way to filter the data that the PLD shows? Does PLD have its own SQL script it uses b/c its not showing data from the query.
Thanks,
Nick

Hi Nicholas,
Please check below links.
query based print layout design
Print Layout Designer \Custom Reports
How to Make a Print Layout (PLD) Report from a SBO Query | SBOnotes.com
http://www.tegrous.com/wp-content/uploads/2011/07/HowTo_QPrintLs_88.pdf
Hope this help
Regards::::
Atul Chakraborty

Incorrect data for proportional factor in query based on Planning Book

hi,
We have upgraded from APO 3.1 to SCM 5.0.
Post upgrade, the proportional factor is being displayed incorrectly in the BEX query based on the Planning Book data if we run the query for multiple months.
for eg,
if, in the planning book, the proportional factor for months 10.2009 and 11.2009 are as follows :
Brand >> Month >> Proportional Factor
B1 >> 10.2009 >> 70%
B2 >> 10.2009 >> 30%
B1 >> 11.2009 >> 80%
B2 >> 11.2009 >> 20%
When we execute the query for the above brands for months 10.2009 and 11.2009,
then, at the total level, the % displayed is 100% and the data at brand level is halved.
We do not have any exits or formulae operating at the key figure level in the query and hence are unable to figure out why this is happenning...
Any clue on this ?
regards,
Anirudha

Resolved.

Auto-expire from query based on date

Similar Messages

Maybe you are looking for