Auto fill system date

I'd like to be able to have the system date (YYYY MM DD format) automatically fill in a date field.
Also this data should stay fixed if the PDF is saved. For example, the user fills in the form and saves a copy with the system date of that day. However when the user re-opens the PDF next week the original system date should still be there (not replaced by the current system date).
Can any provide me with the code to do this? Thanks.

Bet,
The javascript that you will need is:
if (DateTimeField1.rawValue == null)
Now = new Date();
DateTimeField1.rawValue = Now.getYear()+1900 + "/" +(Now.getMonth()+1) + "/" + Now.getDate();
Note: The DateTimeField1 has to be readonly type. This will prevent the users from modify the value in this field.

Similar Messages

How do i keep only the name of a month in a cell in Numbers and not have it auto fill the date and time?

how do i keep only the name of a month in a cell in Numbers and not have it auto fill the date and time?

Hi JN and Barry,
Barry wrote:
The second case may not be included in the available D&T formats in Numbers 3
For my region, the Date & Time data formats include month.
The Date Pop-Up
This may not be the case for all regions.
Remember that the month is only the display, and the Full Date & Time is still there. If I change the format to reveal what is behind the curtain:
Regards,
Ian.

Auto-fill/password data deleted following Safari crash

So, I've been having a seriously large amount of problems with Safari crashing over the past few months. Usually it just shows the spinning wheel of death, sometimes it just automatically reloads every page/tab I have open (if anyone can suggest a fix for that it would be great).
However, this time it crashed and it appears to have completely wiped out all of my auto-fill/password data that I had saved. As this is a personal computer and nobody else uses it, I had a lot of passwords saved into it (most of them for low security risk sites). As everybody knows, a user often has hundreds of usernames/paswords for a huge number of websites. I can't remember them!
I'm concluding that as they've all been deleted, I'm going to have to go through the arduous process of clicking the 'forgotten username/password' to retrieve these details; however, now whenever I try to save back in the auto-fill, it's not really working too well and just isn't saving it, despite me choosing for auto-fill to be operational on the website.
Any help would be massively appreciated to sort this, as having to keep entering my usernames/passwords - urgh, let's just say this is the biggest first world problem since before bread was sliced!!
Safari version 5.1.10
Mac OS X Version 10.6.8

Passwords are stored in Keychain Access located in Applications > Utlities
Launch Keychain Access then select Passwords on the left.
Type in the name of a website you've visited that autofilled the password.
Then double click the website name the select the Attributes tab then click: Show password
You may be prompted for your admin password to proceed.
If you want a website to re remember the password, right or control click the website name in Keychain Access the click Delete.
The next time you login to that site and enter your password you should be prompted to save that data to a new keychain.
message edited by: CS

How do I auto fill a date field for an Adobe form?

Hi. I am new to Acrobat. I would like to have Acrobat auto fill today's date in a date field when I open an acrobat form. I check the forum help and it indicated that I associate this javascript text to the field:
var f = this.getField("Today"); if (f.valueAsString=="") f.value = util.printd("mm/dd/yyyy", new Date());
However, when I try it out, nothing happens.
Any clue as to what I am doing wrong?
- Michael

Hi M. Krebs,
Is there a text field in the PDF labeled "Today" and set as a date field? And does the Date Options format set for the field match what is in the JavaScript (mm/dd/yyyy)?
Best,
Sara

Calling report with auto-filling the date parameter

Hi all,
I need to schedule a report whereby the date is need to be entered manually by the user.
Now, if I need to schedule this report, how am I tell this report on the date parameter I want to fix in the 1st day of a month. So that the report will be generated based on the schedule time say every 1st day of the month and in the report date parameter as well it will automatically filled up the date. How to do that in details ?
Any advise will be appreciated.
Rgds
Lim

Hi!
For a scheduled task I would just called your report in a way similar to this:
rwrun60.exe ... paramform=no p_date=sysdate
where p_date is a date parameter created in the report. Take a look at the online help article "RWRUN60 Command Line Arguments" for more information.
Regards,
Andrew Velitchko
BrainBench MVP for Developer/2000
http://www.brainbench.com

Timesheet entry form that auto-fills the Date ranges?

I currently have a ColdFusion form & need to add a "Week Selector" drop-down above my table so that:
- when the week is chosen from the drop-down, (how do I generate these weeks drop-down values?)
- the correct dates are added to the date fields in the form.. (how do I populate the text boxes?)
- Once the user chooses the week, the Sun-Sat dates update, he then enters his time for each day..
--Choose Week-->Nov 3 thru Nov 9<-- (drop-down)
Sun---Mon---Tue---Wed---Thu---Fri---Sat (static labels)
11/03 11/04 11/05 11/06 11/07 11/08 11/09 (text boxes for dynamic dates)
0 8 8 8 8 8 (text boxes for hours entry)
Here is a sample picture of what I'm trying to roughly duplicate:
Note: This UDF post by Ben Nadel looks promising: http://www.bennadel.com/blog/719-Ask-Ben-Getting-The-Date-Based-On-The-Year-And-Week-In-Co ldFusion.htm

Ok, here is my current page so far:
- Using this jq weekly calendar: http://jsfiddle.net/manishma/AVZJh/light/ I'm able to select the week and have it update my "Start thru End" dates text boxes.
- But how do I update the javascript (code below) to also "populate" the weekday column headings (highlighted in yellow) with the mm/dd?
- Lastly, I'm not sure how to do the SQL INSERT across three rows of data (highlighted in yellow)?
Here is my updated code to fill in the labels with the dates:
<script type="text/javascript">
$(function() {
var startDate;
var endDate;
var monDate;
var tueDate;
var wedDate;
var thuDate;
var friDate;
var satDate;
var sunDate;
var selectCurrentWeek = function() {
    window.setTimeout(function () {
        $('.week-picker').find('.ui-datepicker-current-day a').addClass('ui-state-active')
    }, 1);
$('.week-picker').datepicker( {
    showOtherMonths: true,
    selectOtherMonths: true,
    dateFormat: "mm/dd",
    firstDay: 1, // Start with Monday
    onSelect: function(dateText, inst) {
        var date = $(this).datepicker('getDate');
        startDate = new Date(date.getFullYear(), date.getMonth(), date.getDate() - date.getDay() + 1);
        endDate = new Date(date.getFullYear(), date.getMonth(), date.getDate() - date.getDay() + 7);
        monDate = new Date(date.getFullYear(), date.getMonth(), date.getDate() - date.getDay() + 1);
        tueDate = new Date(date.getFullYear(), date.getMonth(), date.getDate() - date.getDay() + 2);
        wedDate = new Date(date.getFullYear(), date.getMonth(), date.getDate() - date.getDay() + 3);
        thuDate = new Date(date.getFullYear(), date.getMonth(), date.getDate() - date.getDay() + 4);
        friDate = new Date(date.getFullYear(), date.getMonth(), date.getDate() - date.getDay() + 5);
        satDate = new Date(date.getFullYear(), date.getMonth(), date.getDate() - date.getDay() + 6);
        sunDate = new Date(date.getFullYear(), date.getMonth(), date.getDate() - date.getDay() + 7);
        var dateFormat = inst.settings.dateFormat || $.datepicker._defaults.dateFormat;
        $('#startDate').val($.datepicker.formatDate( dateFormat, startDate, inst.settings ));
        $('#endDate').val($.datepicker.formatDate( dateFormat, endDate, inst.settings ));
        $('#monDate').val($.datepicker.formatDate( dateFormat, monDate, inst.settings ));
        $('#tueDate').val($.datepicker.formatDate( dateFormat, tueDate, inst.settings ));
        $('#wedDate').val($.datepicker.formatDate( dateFormat, wedDate, inst.settings ));
        $('#thuDate').val($.datepicker.formatDate( dateFormat, thuDate, inst.settings ));
        $('#friDate').val($.datepicker.formatDate( dateFormat, friDate, inst.settings ));
        $('#satDate').val($.datepicker.formatDate( dateFormat, satDate, inst.settings ));
        $('#sunDate').val($.datepicker.formatDate( dateFormat, sunDate, inst.settings ));
        selectCurrentWeek();
    beforeShowDay: function(date) {
        var cssClass = '';
        if(date >= startDate && date <= endDate)
            cssClass = 'ui-datepicker-current-day';
        return [true, cssClass];
    onChangeMonthYear: function(year, month, inst) {
        selectCurrentWeek();
$('.week-picker .ui-datepicker-calendar tr').live('mousemove', function() { $(this).find('td a').addClass('ui-state-hover'); });
$('.week-picker .ui-datepicker-calendar tr').live('mouseleave', function() { $(this).find('td a').removeClass('ui-state-hover'); });
</script>
And then in my HTML page I used:
<thead>
<tr>
<th>Type</th>
<th>Mon<br>
    <input disabled id="monDate" size="5" data-mini="true"></th>
<th>Tue<br>
    <input disabled id="tueDate" size="5" data-mini="true"></th>
<th>Wed<br>
    <input disabled id="wedDate" size="5" data-mini="true"></th>
<th>Thu<br>
    <input disabled id="thuDate" size="5" data-mini="true"></th>
<th>Fri<br>
    <input disabled id="friDate" size="5" data-mini="true"></th>
<th>Sat<br>
    <input disabled id="satDate" size="5" data-mini="true"></th>
<th>Sun<br>
    <input disabled id="sunDate" size="5" data-mini="true"></th>
<th>Totals</th>
<th>Description</th>
</tr>
Message was edited by: jlig

Auto-fill calender date and validate other fields depending upon selected date for infopath forms

I have a calender box in infopath form which i want to autoselect when user opens the form..Ex..i am opening form on 14th march the calender should show as 19th march and also i have to perform few validation and action such as if i am selecting date with
more than 5 days gap should open other field which is a dropdown..How can i perform this..

Do you have Excel Services? if so, this article may be of use to you:
http://sergioblogs.blog.co.uk/2013/01/08/infopath-2010-and-excel-services-in-sharepoint-15407321/
You can configure an excel workbook to validate if a date is a working day and then use formulas to workout the working date for 5 days after the date you enter, then link your InfoPath form to connect to the excel workbook and return the result of your
calculation.
Regards
Sergio Giusti
http://sergioblogs.blog.co.uk/
Whenever you see a reply and if you think is helpful, click " Vote As Helpful". And whenever you see a reply being an answer to the question of the thread, click "
Mark As Answer".

Auto filling multiple feilds

Hey All,
How can I Auto fill multiple feilds from what is imputed into one feild?
eg. someone types their name into textfield1, and I want this name to show up in multiple location in a form.
I searched and found this This code:
this.parent.textfield2.rawValue = this.rawValue;
and
textfield2.rawValue = this.rawValue;
but this only seems to fill one field. I tryed to change the name of each of the corrosponding fields to textfield 2, but still only one field was filled in.
Also, is there a way to auto fill the current date/time into a feild? and if so, is there a way to calculate a future date? eg. I want a field to auto fill the date 1 year from today.
thanx much.

You might have to write the whole paths of the fields if in subforms
but one solution is to continue the same way, (There might be an easier way without having to repeat the same line over & over again! ..with an array of fields I guess)
but anyway...
say your fields are named Textfield1, Textfield2 & Textfield3: you'd write:
this.rawValue = Textfield1.rawValue
this.rawValue = Textfield2.rawValue
this.rawValue = Textfield3.rawValue
if for example Textfield was inside a subform called sub1
you'd have to write:
this.rawValue = sub1.Textfield3.rawValue
for current date & time, you can use:
txtCurrentDate.rawValue = util.printd("dd/mm/yyyy",new Date()) + ' ' + util.printd("HH:MM",new Date());
sorry, I dont know how to do date calculations but if you find out, please let me know!

System.Data - Crash during DataTable.Load

Hello
I encountered a (random) crash of my executable during a DataTable.Load when i do a "select" request with a big CLOB (> 24000 characters).
I have coded a test and the error happen after 5 or 6 execution. I find a way to correct the problem by adding a Thread.Sleep after the DataTable.Load.
But it's clearly not a solution
DataTable myTable = new DataTable();
myTable.Load(myReader);
=> This code crash
DataTable myTable = new DataTable();
myTable.Load(myReader);
Thread.Sleep(1000);
=> this code work
I have the same problem with a myReader.GetValue() and a myReader.GetString()
If someone could provide an explanation...
Thanks
My configuration :
Oracle driver : OraOleDb v11.1.0.6
My assembly if compiled on Framework 4.0 x86
Here is the detail of the exception :
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: System.AccessViolationException
Stack:
at System.Data.Common.UnsafeNativeMethods+IRowset.GetData(IntPtr, IntPtr, IntPtr)
at System.Data.OleDb.OleDbDataReader.GetRowDataFromHandle()
at System.Data.OleDb.OleDbDataReader.GetValueBinding(System.Data.OleDb.MetaData)
at System.Data.OleDb.OleDbDataReader.GetValues(System.Object[])
at System.Data.ProviderBase.DataReaderContainer+CommonLanguageSubsetDataReader.GetValues(System.Object[])
at System.Data.ProviderBase.SchemaMapping.LoadDataRow()
at System.Data.Common.DataAdapter.FillLoadDataRow(System.Data.ProviderBase.SchemaMapping)
at System.Data.Common.DataAdapter.FillFromReader(System.Data.DataSet, System.Data.DataTable, System.String, System.Data.ProviderBase.DataReaderContainer, Int32, Int32, System.Data.DataColumn, System.Object)
at System.Data.Common.DataAdapter.Fill(System.Data.DataTable[], System.Data.IDataReader, Int32, Int32)
at System.Data.Common.LoadAdapter.FillFromReader(System.Data.DataTable[], System.Data.IDataReader, Int32, Int32)
at System.Data.DataTable.Load(System.Data.IDataReader, System.Data.LoadOption, System.Data.FillErrorEventHandler)
at eWorkflow.Dal.Dal.DalBase.ExecuteReader(System.String)

Hi,
Sorry so late to answer your question.
Per my understanding, you have load a large of data,and don't have enough memory.
But form the exception Info: System.AccessViolationException
It seems as joel said, maybe some others attempt to read/write the same data. Please exclude these
factors and try again. Good Luck!Best wishes!
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Date Auto Fill

Is it possible to have a formula that, when that cell is clicked and entered into, it auto fills out today's date?
Many thanks for any help,
Cptbigt

As Jerry said, you can use the TODAY function which will always have today's date (assuming you opened the document today or made a change to it today). It updates to the current date whenever the document is opened or modified. However, if you want to have that date "stick" and never change, you should use Insert Date & Time, which Jerry also mentioned. The other difference is that TODAY sets the time to 0:00 while Date & Time sets it to the current time. So, if you do Date & Time and your spreadsheet has any comparisons that involve comparing two "date" cells to see if they are equal, remember that the time is different.
In Apple/System Preferences/Keyboard Shortcuts you can add a shortcut for Date & Time so you can insert it with a key combination rather than from the menu. Much easier.
If you format the date cells beforehand, you can get the date in the format you want rather than the default format or having to double click and choose a format.
Message was edited by: Badunit

How to: Create a master form that auto-fills data into other pdf forms?

I hope someone can please help me. I have about 15 PDF forms that all require similar data entry (name, address etc). Can I create a master form that we fill in once per client, and then auto-fill in the matching data on the 15 forms?
I am not looking for an online solution as the information is highly sensitive.
I have already created a form in Acrobat X Pro with the 'master data', and created the (15) forms with identically named fields. How I link the forms now to the master, I cannot figure out (after much searching).
I have read similar questions on the same topic but have not found any answers. I hope this time someone can please help.
Many thanks in advance.

Thank you! I had just figured out how to export the data from the master as an FDF file and then import it to the other files. I'm afraid I don't understand scripting to automate the process across multiple files. To you mean with java script?
I've also thought about combining the forms, once we know which ones the particular client will need. I have to see how it works in practice for my colleagues who will be using them.
Thank you again.

In sm30, when save, how to fill the table with the system data in the table

Hi all, in SM30, we have user name and time fields, when we create record, after we click the SAVE button, it will automatically fill the fields with the system data, how can we realize it?

Hi ,
Do like this.
1. Go to SE11 -> give your table name and press on change button .
2.Go to Menu->Utilities-> Table Maintainance Generator , then it will take you another screen .
3.Assign Functin group if already have one , other wise create function group and assign
4.Go to Menu->Environment->Modification->Events , again it will take you to another screen
5.Click on new entries
->Now press F4 in T column . Select<u> "01" - Before saving the data in the database</u> and in form routinue give any name of the routinue like "SAVE_USER_DATA" and press enter then u can see an editor symbol in next column click on that it will take you ABAP editor there type this code .
ztable-username = sy-uname.
ztable-createtime = sy-uziet.
check and activate the code .
With this your job will be complete . Now while entering data just leave columns blank , they will insert corresponding username and time
Don't forget award points if it helps you.
Regards,
Raghav

I have a acrobat reader, can I import text delimited data format to a PDF Form so that it can auto fill into forms that was created? If not, what about FDF and XML data

I have a acrobat reader, can I import text delimited data format to a PDF Form so that it can auto fill into forms that was created? If not, what about FDF and XML data

Yes, you can do all of that via Tools - Forms - More Form Options - Import Data, if you have Acrobat.
If you only have the free Reader then you can still do it, but it requires a script.

Date Created Metadata Auto Fill

Is it possible to have Aperture auto fill in the Date Created field? I've searched the help files and online posts, but don't see a way to do it.
Apparently Bridge does not read the "Image Date" IPTC field from Aperture as "Date created" so I need to update about 6,000 images and am weary to do this by hand!
Thanks a lot,
Kate

Ok, half way there. I downloaded an app called Pref Setter to edit the preferences by deleting the array strings that I no longer needed.
Also you can adjust the hierarchy of the auto completion data. I found that helpful with the copyright field since they all start off the same.
Need to still find a way to have the data automatically entered from a default setting, with out having to start typing.

Auto-Filling Dates on a Blank Calendar

Hello All,
I have a blank calendar with each day block having a form for the numeric day. I am trying to have the blocks auto-fill so that when the user enters day "1" the remaining days will auto-fill there respective number. I have already figured out the "+1" script I need to link them;
event.value = ( getField("Day_1_Date").value)+1
However, I assume I need an "IF/THEN" statement so the prior unused blocks preceeding day "1" will be blank. If anyone has a better suggestion or can help me out with the latter I would appreciate it. Thanks in advance!

A couple of clarification points.
1) It's a single month calendar with 6 rows for weeks (allowing for any months that start on a Friday or Saturday.
2) Each form for the numeric date is labeled "Day_x_Date" (x= the block number 1-42)
I have it now that if I put in the first day in block #1, all of the remaining fields are daisy chained using the above java script (#2 looks to #1, #3 looks to#2, etc). What I want is for the user to be able to enter the first day (wherever it may fall) then the rest of the fields would auto-fill. To end it on the right date, I assume an "If/Then" with a range up to the end date would work.
I also have a block to fill the month in. It might work to link the end date to the month. For example if May is entered the statement would allow up to 31 but if June were entered it would only go up to 30. I am still very new to javascript and I'm a little (a lot) over my head with this one. New territory from just making forms on a PDF.

Auto fill system date

Similar Messages

Maybe you are looking for