Auto index only shows partial data

Hi everyone,
Please see the attached file. I've added notes where the data goes missing. I know it has something to do with auto-indexing and I spent quite a bit of time reading about it and trying different things but I really need some help now please.
Thank you!
Solved!
Go to Solution.
Attachments:
For forum.vi ‏47 KB
For forum.xlsx ‏12 KB

Think about what you're trying to do.
You have three arrays you're indexing. Let's say they're lengths 1, 2, and 3.
In the first iteration, we'd index 0 and get back a value from all three.
In the second iteration, we'd index 1 and get back two values and have a bounds conflict.
In the third iteration, we'd index 2 and get back a single value while having two bounds conflicts.
Anything you process in the second and third iteration is garbage. You have bad inputs so the output isn't useful to you. In some languages, this will throw an error at runtime for indexing out of bounds. Some will just let you process the garbage. In no case do you WANT to run this.
If you want to process all the elements of the array of size 3, you need to fill in values for the first to arrays to make them all have a length of 3. Once you do that, the loop will run as you desire. If you have auto-indexed tunnels with fewer elements than the constant you wire, they will override the terminal, as they should.

Similar Messages

Auto-index only shows 9 values instead of 91

I'm pretty new to LabVIEW and am trying to show a cluster of 91 values pulled from a text file. Just for a test run without using actual values passed, I created a text file with the numbers ranging from 1-91 (1 number per line up to 91). When I let it auto index and try to unbundle it after transforming it from an array to a cluster, it only shows 9 values instead of 91. Do you happen to know how I can overcome this issue?
I have attached the basic files.
Solved!
Go to Solution.
Attachments:
For Loop Problem.vi ‏7 KB
SMA.txt ‏1 KB

STigmata08 wrote:
Thank you very much, I had no idea that you could select a cluster size from the transformation. I am converting it to a cluster because I thought that it would be the best form to insert the data into different parts of a word template. I am trying to build an auto reporting tool for a test sequence.
You need to set thee cluster size, because clusters are static structures and the size needs to be known at compile time. This also makes them useless for your problem.
To extract all lines from a file, you could use Spreadsheed string to array with a 1D string array as type and linefeet as delimiter. No need for FOR loops and complicated code. Also your sequence structure has no purpose because execution order is fully determined by dataflow anyway. Why is it there? Don't clutter the diagram with useless constructs!
Here's what you could do. You can get any element, array subsets, etc. using array tools. These are scalable and you don't need to know beforehand how many line are in the file.
Here's a quick draft (LV8.6)...
LabVIEW Champion . Do more with less code and in less time .
Attachments:
For Loop ProblemMOD.vi ‏8 KB
ArrayNoCluster.PNG ‏9 KB

Homesharing only shows partial library since updating iTunes and iOS

Made mistake of updating iphone, ipad, and PC to latest versions of iTunes and iOS> Ever since then homesharing will only show partial iTunes library on ipad or iphone. Don't know if problem is with iTunes or iOS, or both.
I have tried remove and reinstall itunes on pc. I've tried turning homesharing on/off on all devices - sometimes it works once or twice and then next time I try to use homesharing it doesn't work again.

This is a recurring problem. The only solution I am aware of is to restore your device (both an iPhone5 and iPad2 in my case) to factory settings and then restore your data from your most recent backup. It will then share the entire library from your in your iTunes on your computer. However, after a few uses of the shared library on your device, the same problem will re-occur; at some point only a portion of the library will be shared, and you will have to re-do the restore routine.
Since this problem occurs on both my iPhone 5 and iPad2, I have concluded (for now, anyway), that this is a problem with iTunes, not with my devices.
I hope this admittedly cumbersome solution is helpful

Tables & Index not showing any data

Hi All,
I have done the db2 upgradtion from 9.1 to 9.7 with fix pack 4.I am unable to see table size after upgrade. I have checked all the sap collector job running fine.
db02>history>tables& index not showing any data
Regrads,
Mnai

Please make sure RSCOL00 running or execute it manually.
Did you try to run the stats in DB13 ?

My apple tv only shows retreaving data... since i replaced computer hard drive. Do i need to resync and how?

My apple tv only shows retreaving data... message after I replaced my computer hard drive. I have unplugged tv to try to get to connect. I have home sharing turned on but still no connection.

If you've changed the computer hard drive AppleTV may see this as a different computer but in theory if Home Sharing is enabled it may not matter.

Using auto-indexing tunnels to write data files?

Hi,
I am using ni-motion controller to control a servo motor and collect position and torque data. I want to write the collected data to TDMS files.
Recently I learned about the producer/consumer design pattern and I figured that would be a good approach to ensure that writing the files didn't slow down my data collection timed loop.
However, I also figured out that my program seems to run well if I wire the data I collect to auto-indexing tunnels. Then I use a structure that only executes after all the data collection is done to write the arrays I built to TDMS files.
Is there any reason that the latter method would be advised against? Can the auto idexing tunnels slow down my loop enough for it cause concern? I am only collecting about 5000 data points for each channel.
Cheers,
Kenny
Solved!
Go to Solution.

Well, autoindexing tunnels don't write data files, they just accumulate data until the loop completes. If this is a FOR loop with a known number of iterations, the size of the output data can be allocated in one swoop, which is very efficient. If you are autoindexing on a WHILE loop, the final array size is not known, so LabVIEW needs to make a guess and and requires occasional new memory allocations whenever the last guess is exceeded. This is inefficient.
One problem with these approaches is if the program or computer crashes. In this case the data in the shift register is lost forever, while if you would stream it to disk, you would have most of the data acquired so far.
If you use a proper producer/consumer architecture, you should be able to asynchronously write the data and it will not slow down your acquisition. No need ot wait for the competion of data gathering.
LabVIEW Champion . Do more with less code and in less time .

Firefox 10 and IE 8 only showing partial pages certain websites

Several websites showing partial pages; 2 websites showing pages correctly.

http://walgreens.shoplocal.com/walgreens/default.aspx?action=entryflash&
This is the store locator/weekly ad url. Walgreens customer service said download latest version of Adobe Flash,which I did=did not solve the problem
Having the same problem with most websites, but others are readable, this one is not.

Date Field in the Index when Apending Emails to PDF only shows received date

Hi,
I have Adobe Professional X with Outlook 2010 and I need to create a pdf with an index of about 1300 emails that are a mix of send and received items. For legal reasons I need to be able to sort them by sent date, however there is only one date field visible when I look at the columns in the pdf. this field seems to be the received date.
Does anyone know anyway to change this or to add another field so that I can see the send date of emails?
Thanks
Lance

Hi,
Hi segment E1P0000 is standard segment, you will not be able to make any changes. As per requirement you need to create the z<segment> with required field and assign the corresponding data element(as per your data type requirement).
Thanks,
Asit Purbey.

CONTROL PANEL UTILITIES ONLY SHOWS PARTIAL SCREEN

Just built my first computer and everything is work very well. I have a h55m-ed55 mainboard and I'm trying to put the finishing touches on it. All my utility screens show only half the information not a full screen just partial so I cant see everything. Also my icon has a windows shield on it not sure if its related to the problem. Like I said this is my first build so be easy on me if this is a stupid question. Any help would be greatly appreciated. Thanks JWH

I hope this helps.
SYSTEM SUMMARY
Windows 7 Service Pack 1 build 7601 (32-bit),
1 x Intel(R) Core(TM) i3 CPU 550 @ 3.20GHz,
3.0GB RAM,
ATI Radeon HD 2600 XT,
84GB HDD, 466GB HDD,
CD-RW/DVDRW,
GENERAL
System Name: JWH-PC
System Model: MS-7635
Motherboard Manufacturer: MSI
Motherboard Name: H55M-ED55 (MS-7635)
Motherboard Version: 1.0
BIOS Manufacturer: American Megatrends Inc.
BIOS Version: V1.5
BIOS Release Date: 06/29/2010
CPU
CPU manufacturer: GenuineIntel
CPU Type: Intel(R) Core(TM) i3 CPU 550 @ 3.20GHz
Codename: Clarkdale
CPUID: Family 6, Model 25, Stepping 5, Revision C2
Socket: LGA1156
Lithography: 32nm
Physical CPU's: 1
Cores per CPU: 2
Hyperthreading: Disabled
CPU features: MMX SSE SSE2 SSE3 SSSE3 SSE4.1 SSE4.2 DEP PAE Intel64 VMX
Clock frequencies:
Measured CPU speed: 3208.4 MHz
Base Clock: 133.3 MHz
Muliplier range: Min: x9, Max non turbo: x24
Cache per CPU package:
L1 Instruction Cache: 4 x 32 KB
L1 Data Cache: 4 x 32 KB
L2 Cache: 4 x 256 KB
L3 Cache: 4 MB
TDP Limit: 73 Watts
TDC Limit: 59 Amps
MEMORY
Total Physical Memory: 3063MB
Available Physical Memory: 1631MB
Memory devices:
0:
- Not populated
1:
- Not populated
2:
- 4096MB, 1333MHz,
3:
- 4096MB, 1333MHz,
Virtual memory: C:\pagefile.sys (allocated base size 3063MB)
GRAPHICS
ATI Radeon HD 2600 XT
DAC Type: Internal DAC(400MHz)
Memory: 256MB
BIOS: 113-AB18600-101
Driver provider: ATI Technologies Inc.
Driver version: 8.56.1.16
Driver date: 4-25-2009
Monitor 1: 1280x1024x32 60Hz
Monitor 2: 1920x1200x32 59Hz (Primary monitor)
DISK VOLUMES
C: Local drive, NTFS, (83.75GB total, 64.61GB free)
D: Local drive, New Volume, NTFS, (465.76GB total, 452.44GB free)
E: Optical drive, G71-MID1014, DRW-24B3LT, CDFS
F: Removable
DISK DRIVES
Disk drive: Model OCZ-AGILITY2 ATA Device (Size: 83.84GB)
Disk drive: Model SAMSUNG HD502HJ ATA Device (Size: 465.76GB)
Disk drive: Model Generic Storage Device USB Device (Size: 3.79GB)
OPTICAL DRIVES
E: ASUS DRW-24B3LT (CD-RW/DVDRW)
NETWORK
Realtek PCIe GBE Family Controller (Speed: 100Mb/s)
PORTS
Communications Port: COM1 - RS232 Serial Port (max Baud rate: 115200)
Mouse Port: PS/2 connector
Keyboard Port: PS/2 connector
Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B3C
Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B34

How can the album-art, which is all in iTunes , suddenly only shows partially on the iPod classic 160 gb?

I'm user of iTunes for years and in possession of 2 iPod classics.
For both iPods I have a specific playlist created, which I sync with iTunes. Each of my nearly 50,000 tracks in iTunes comes with the right Album-art (all 500 x 500 pixels and 72 dpi) andeach track contains also the necessary meta data and is converted to 160 or 192 kbps M4a. In Finder on my MacBook I can see that the M4a files all contain album-art, because the file icons show the album art for each file name! Also in the grid overview of iTunes you can see them all, no exception.
For years that went well. Now, a week ago, I made a new playlist (16,000 tracks) for one of my iPod classics because I wanted a different content! The old playlist I discarded and synchronized the new one. Now it appears that a large number of album-art on the iPod is not shown, nor in cover-flow nor during play-back. I then tried to get my new playlist updated by exported as XML and then imported into iTunes again. In that case all tracks from the list are checked for completeness against the library and after import it should be fine. Unfortunately, it is not the case. Still the album-art is not shown for all tracks/albums on the iPod.
I run iTunes (11.2.2 (3)) on a MacBook Pro at the end of 2009, with the latest OSX version (10.9.3) and with enough disk space and memory.
My iTunes library is on a NAS (Synodisk DS209J II plus) the iPods run on the latest sw version (1.1.2) and are both Apple formatted.
I wonder if this is an iPod error or something wrong with the library. I hope you will understand, that I do not want to lose all the metadata of the 50,000 tracks by rebuilding the library, especially things like: date added, number of times played, rating, comments!
I hope someone can provide me an acceptable solution.
With regards, Sign-X

I'm a bit confused, but I assume you want to shuffle your playlist while you are playing it in iTunes. If this is so, you will actually have to start playing a song before the shuffle button appears, and it appears in the top center panel of your iTunes window. Yeah, I know...

List Builder only shows 1 data set at a time

Am attempting to get a list builder to display multiple data sets but am hitting a wall. When a 1st data set is selected then all OK. Add 2nd data set and update list and only 1st is shown. Remove 1st and update and data is refreshed to 2nd list. Add 3rd and repeats itself and so on. Looks like all OK based on the sample but built from scratch and think missing something simple in the destination range (although appears fine). thoughts?

Can you describe this in more detail?
How are your datasets defined in your excel model and how are your target cells formatted?
How are you trying to display the two resultsets in list builder in the first place? The cell range has to be contiguous for list builder to work.

Modify MDX query so it only shows specific dates?

I'm new to SSAS and SSRS reports (with datasource an SSAS cube), so please bear with me.
So I created a basic report that gets the data from my SSAS cube and displays it. That is working well. The problem is that the parameter displays the Dimension [Dim Date].[Date Key] so the dropdown displays every single day in the dimension table.
One of my datasets in the report is a hidden dataset called [DimDateDateKey]. This is the dataset used to display all the values in the datekey dropdown parameter. The MDX query looks like this:
WITH MEMBER [Measures].[ParameterCaption] AS [Dim Date].[Date Key].CURRENTMEMBER.MEMBER_CAPTION MEMBER
[Measures].[ParameterValue] AS [Dim Date].[Date Key].CURRENTMEMBER.UNIQUENAME MEMBER
[Measures].[ParameterLevel] AS [Dim Date].[Date Key].CURRENTMEMBER.LEVEL.ORDINAL
SELECT {[Measures].[ParameterCaption], [Measures].[ParameterValue], [Measures].[ParameterLevel]} ON COLUMNS ,
[Dim Date].[Date Key].ALLMEMBERS ON ROWS FROM [Sales cube]
My question is, how can I modify this query so that it only displays dates that are between today and 5 days ago? The column [Dim Date].[Date Key] is of type INT, so it would only display 20141012 and 20141017.
Currently, it displays every single [Dim Date].[Date Key] of the table, which is from 20000101 to 20201231.
Thanks.
VM

Hi VM,
you have to dynamically filter data based on current date. Current date you can get using VBA function now().
I enclose code adjusted code sample you pasted, but because I don't have same cube as you do, I wasn't able to execute it. Anyway it should work or at least you should see there that principle
WITH MEMBER [Measures].[ParameterCaption] AS [Dim Date].[Date Key].CURRENTMEMBER.MEMBER_CAPTION MEMBER
[Measures].[ParameterValue] AS [Dim Date].[Date Key].CURRENTMEMBER.UNIQUENAME MEMBER
[Measures].[ParameterLevel] AS [Dim Date].[Date Key].CURRENTMEMBER.LEVEL.ORDINAL
SELECT {[Measures].[ParameterCaption], [Measures].[ParameterValue], [Measures].[ParameterLevel]} ON COLUMNS ,
[Dim Date].[Date Key].ALLMEMBERS ON ROWS FROM
(SELECT {StrToMember("[Dim Date].[Date Key].&[" + Year(now()) * 10000 + month(now()) *100 + day(now()) + "]"):
StrToMember("[Dim Date].[Date Key].&[" + Year(now()-5) * 10000 + month(now()-5) *100 + day(now()-5) + "]")}
ON COLUMNS FROM
[Sales cube]
Jiri Neoral

How come Apple Pay only shows time date city state for my transactions with it? It doesn't even show the name of the store or the amount-

Using two separate Chase Visas, Apple Oay is working fine but the transaction list is very generic. It lists time, date, city, state and two dashes where amount should be. Shouldn't it at least show the name of the store and the amount?

Hi. I don't know if this will help, but I had this problem too. Mine quit working after I used earbuds. I was told that there is a switch inside the earbud port that tells the device to divert sound to earbuds. This can get "stuck" and the device keeps thinking the earbuds are plugged in. After reinserting the earbuds a few times, the switch was released and my speakers started working again.
I'm not a techie.... this is just what I found to work after my iPhone 4S speakers quit.

MDXTEST not showing PARETO data

Hi All,
I need some help regarding MDX and Pareto condition in Query.
I have a BW query, in this query, i have a pareto condition to filter sales > 80%
I get the MDX code for this query, i selected the characteristic and key figures i wanted to display in the mdx.
I executed this MDX code in transaction - MDXTEST, although it only show partial data, but for the first few rows of the returned data, i can confirm it's not within the pareto condition.
Question: does this mean, when we use MDXTEST, the pareto condition will not apply?
Thanks if someone can verify this.

Hi Nick
SAP note 1387793, points out that
1)Query Conditions using complex (logical) 'Selection Option' variables.
2)Query Conditions using operators, like 'Top-N' variable
are not supported by OLAP BAPI via MDX Interface.
I think you should create a rank filter in webi document (if you are using web intelligence), even if from performance perspective it would be better your approach: to filter data BW side.
Regards.
Roberto.

How to create a formula that shows only the last date of a series of dates

I have a report that shows a series of dates that 'notes' were created on a particular file. I want the report to only show the date of the last note that was created instead of showing all the dates. Ive tried using 'Maximum ()' which does not work.
Any suggestions?

Either order the dates in ascending order and place the date field in the group footer
-or-
order the dates on descending order and plade the date field in the group header.
HTH,
Jason

Auto index only shows partial data

Similar Messages

Maybe you are looking for