Automate an ODI scenario

Need to aumtomate an odi scenario with some conditions.
Let me know any link on which all the related information regarding scheduling an odi scenario will be done.

rv wrote:
I have read this document and done all that steps which are explained in it.
What I am trying to do is that when an automatic scenario failed to do the work which was planned.
Then after how much time it will try to do that work again.
In the execution cycle tab of scenario scheduling the constraints tab have two option of number of attempts on failure and stop execution after but there is no option of time after which it will restart the scenario.
This is the problem which i am facing.
Please suggestIn your package that is calling the scenario, you have 'Number Of Attempts' and 'time between attempts (in seconds)' you can set it there.

Similar Messages

  • Event based Automatic execution of ODI scenario (or package)

    My requirement is that whenever my source XML data file is replaced with new file (file-name remains same by the way; the new file is ftp'ed at this location);
    Whenever this event occurs my odi scenario (or package) should get executed automatically.
    I don't wish to achieve this using web-services.
    I am using ODI 11g.
    Any help appreciated.

    Thanks a lot Sutirtha Roy.
    I achieved what I was trying but one issue is still there:
    Following are steps I follow in my ODI Package:
    Step 1:
    Odi File Wait (Waits for XML input file)
    Step 2:
    Execute interface (this interface actually does transfer of Src data of XML to Oracle db)
    Step 3:
    ODI File Move (Moves processed file to some other dir)
    ---- At this point I see a lock .lck file is created of input file
    Step 4:
    ODI File Delete (deletes .lck file)
    Step 5:
    Loop Back to "Odi File Wait" step 1
    But after first file is processed and second file is received at src directory the ODI package couldn't load data in db.
    The interface got executed as if it was void.
    I suspect File is locked in Driver.
    The deletion in step 4 didnt help.
    How can I resolve it.
    Is there a way to execute 'UNLOCK file <fileName>' command on the driver.

  • Need to automate odi scenario through windows

    Hi,
    i need to run an odi scenario through windows scheduler.
    Please let me know.
    Thanks,

    Try creating a BAT file with the scenario execution written for the command line. Here's an example:
    How to run ODI scenario using command prompt
    Then schedule the BAT file through Windows task Scheduler:
    http://www.iopus.com/guides/winscheduler.htm

  • Click Regenerate ODI Scenario  prompts error

    Hi,Experts
        we create an "Import Format" object whose Source type is "Other",and we also create a source adapter which copied from standerd Adapter followed by the ERPI admin guaid.when we done,click the "Regenerate ODI Scenario" button,the web form prompts an error alert with the information "An error occurred" and nothing more.  The  version of FDMEE is 11.1.2.4.0.79 .
        I search for the log file,the file:aif-webapp.log contains the infomation like this: Caused by:com.sunopsis.tools.core.exception.sunssimplemessageException:ODI-15005:DataType "Numeric" does not support in technology Oracle. All our databases are Oracle,we don't have any other type DB,so it shouldn't has any Numeric columns in our table; besides, In FDMEE , we could only access the web console to manipulate the ODI, in the odi console could not view and modify the DataType.
    I wonder if it is a bug, Anyone can  give us some help? Thanks !

    Your question was little ambiguous to me actually. Do you have mutiple package under one folder or only one package having multiple scenario.
    Have you seen the doc?
    http://docs.oracle.com/cd/E28280_01/integrate.1111/e12643/scenarios.htm#ODIDG471
    Replace: Overwrites for each object the last scenario version with a new one with the same ID, name and version. Sessions, scenario reports and schedules are deleted. If no scenario exists for an object, a scenario with version number 001 is created.
    Re-generate: Overwrites for each object the last scenario version with a new one with the same id, name and version. It preserves the schedule, sessions and scenario reports. If no scenario exists for an object, no scenario is created using this mode.
    Creation: Creates for each object a new scenario with the same name as the last scenario version and with an automatically incremented version number. If no scenario exists for an object, a scenario named after the object with version number 001 is created.

  • ERROR WHILE RUNNING ODI SCENARIO FROM BAM ALERT

    We are using oracle data integrator 11g and have created an ODI Scenario and able to run the scenario from ODI studio client.
    We have done the configuration for BAM-ODI integration as mentioned in http://docs.oracle.com/cd/E21764_01/integration.1111/e10224/bam_odi.htm#BABEJIGD
    We have started ODI Agent, soa and bam servers. Created a BAM alert -> select action - Run ODI Scenario -> selected the same scenario.
    Alert ran at scheduled time but failed with following error:
    java.io.IOException : truncated data integrator frame received
    Error Message (if any)
    [2012-08-06T11:24:21.046+05:30] [bam_server1] [WARNING] []
    [oracle.bam.eventengine] [tid: bam-pool-Action-thread-1] [userId:
    OracleSystemUser] [ecid:
    3576f9092ef9497a:-743c430a:138fa7450c3:-8000-00000000000000a8,1:23453] [APP:
    oracle-bam#11.1.1] EventEngine: Error occured while running a ODI Scenario.
    [2012-08-06T11:24:21.250+05:30] [bam_server1] [ERROR] []
    [oracle.bam.eventengine] [tid: bam-pool-Action-thread-1] [userId:
    OracleSystemUser] [ecid:
    3576f9092ef9497a:-743c430a:138fa7450c3:-8000-00000000000000a8,1:23453] [APP:
    oracle-bam#11.1.1] EventEngine: Action exception: EEInstEv2 EEInstAct1 Rule
    Id: 2 exception: java.io.IOException: truncated Data Integrator Frame
    received
    [2012-08-06T11:24:21.250+05:30] [bam_server1] [WARNING] []
    [oracle.bam.eventengine] [tid: bam-pool-Action-thread-1] [userId:
    OracleSystemUser] [ecid:
    3576f9092ef9497a:-743c430a:138fa7450c3:-8000-00000000000000a8,1:23453] [APP:
    oracle-bam#11.1.1] EventEngine: Exception stack trace: [[
    at
    oracle.bam.eventengine.engine.event.action.RunScenario.invokeScenario(RunScena
    rio.java:145)
    at
    oracle.bam.eventengine.engine.event.action.ActionProcessor.runScenario(ActionP
    rocessor.java:891)
    at
    oracle.bam.eventengine.engine.event.action.ActionProcessor.actionHandler(Actio
    nProcessor.java:337)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at
    sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at
    sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.j
    ava:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at oracle.bam.system.Delegate$Sink.invoke(Delegate.java:80)
    at oracle.bam.system.Delegate.dynamicInvoke(Delegate.java:186)
    at
    oracle.bam.common.threading.threadpool.ThreadPoolController$PoolQueueItem.proc
    essWorkRequest(ThreadPoolController.java:155)
    at
    oracle.bam.common.threading.threadpool.ThreadPoolController$PoolQueueItem.run(
    ThreadPoolController.java:128)
    at
    java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java
    :886)
    at
    java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908
    at java.lang.Thread.run(Thread.java:619)
    Any help on this is highly appreciated...
    Thanks
    Rajdip Mukherjee

    Hi,
    Forgot to include the ODI classes RunScenario.invokeScenario() is invoking odi scenario using odi sdk api. Please see the below stack trace :-
    java.io.IOException: truncated Data Integrator Frame received
    at
    oracle.odi.sdk.invocation.internal.AgentNetworkCmd.readCmd(AgentNetworkCmd.java:303)
    at
    oracle.odi.sdk.invocation.OdiInvocation.invokeCommand(OdiInvocation.java:176)
    at
    oracle.bam.eventengine.engine.event.action.RunScenario.invokeScenario(RunScenario.java:140)
    at
    oracle.bam.eventengine.engine.event.action.ActionProcessor.runScenario(ActionProcessor.java:891)
    at
    oracle.bam.eventengine.engine.event.action.ActionProcessor.actionHandler(ActionProcessor.java:337)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at
    sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at
    sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    Thanks
    Rajdip Mukherjee

  • Error while running the ODI Scenario

    Hi All,
    I am trying to execute ODI Scenario from operator window getting below error. I am not sure why the error is comming yesterday it was running successfully.
    I checked the agent connection via test button, it is working fine.
    com.sunopsis.dwg.cmd.b: Error during Scenario launching : Error during Session Preparation : You are trying to execute a session with an agent that is undefined in your repository. Please check the agent -NAME parameter.
         at com.sunopsis.dwg.dbobj.SnpScen.a(SnpScen.java)
         at com.sunopsis.dwg.dbobj.SnpScen.remoteExecute(SnpScen.java)
         at com.sunopsis.dwg.dbobj.SnpScen.remoteExecute(SnpScen.java)
         at com.sunopsis.graphical.g.ot.m(ot.java)
         at com.sunopsis.graphical.o.z.actionPerformed(z.java)
         at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)
         at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2318)
         at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
         at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)
         at javax.swing.AbstractButton.doClick(AbstractButton.java:357)
         at com.jidesoft.plaf.vsnet.VsnetMenuItemUI.doClick(Unknown Source)
         at com.jidesoft.plaf.vsnet.VsnetMenuItemUI$MouseInputHandler.mouseReleased(Unknown Source)
         at java.awt.Component.processMouseEvent(Component.java:6263)
         at javax.swing.JComponent.processMouseEvent(JComponent.java:3267)
         at java.awt.Component.processEvent(Component.java:6028)
         at java.awt.Container.processEvent(Container.java:2041)
         at java.awt.Component.dispatchEventImpl(Component.java:4630)
         at java.awt.Container.dispatchEventImpl(Container.java:2099)
         at java.awt.Component.dispatchEvent(Component.java:4460)
         at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4574)
         at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4238)
         at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4168)
         at java.awt.Container.dispatchEventImpl(Container.java:2085)
         at java.awt.Window.dispatchEventImpl(Window.java:2478)
         at java.awt.Component.dispatchEvent(Component.java:4460)
         at java.awt.EventQueue.dispatchEvent(EventQueue.java:599)
         at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
         at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
         at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)

    I'm guessing the name on the physical agent was different from the agent name of the process running on the server? That's generally when I get this error...

  • Error while running a ODI scenario from command prompt

    Hi,
    I'm trying to run a ODI scenario from command prompt. I've edited the tnsnames.ora and odiparam.bat file with exact host and port details. Even though I'm facing the below error.
    command:startcmd.bat OdiStartScen -SCEN_NAME=INT.CUSTOMER_STG -SCEN_VERSION=001 -CONTEXT=ICM -AGENT_CODE=KANBAN
    Error: java.sql.SQLException: Listener refused the connection with the following error:
    ORA-12505, TNS:listener does not currently know of SID given in connect descriptor
    The Connection descriptor used by the client was:
    localhost:1521:orcl
    at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:125)
    at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:280)
    at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:328)
    at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:361)
    at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:151)
    at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:32)
    at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:595)
    at com.sunopsis.sql.SnpsConnection.u(SnpsConnection.java)
    at com.sunopsis.sql.SnpsConnection.c(SnpsConnection.java)
    at com.sunopsis.sql.i.run(i.java)
    Please help in resolving the error...
    Thanks in advance.
    Edited by: 894841 on Dec 22, 2011 11:15 PM

    Hi,
    Are you able to start the Standalone Agent(KANBAN) and test it in the Topology?
    Check the value of the ODI_MASTER_URL variable in odiparams file(at the path <ODI_HOME>\oracledi\agent\bin) of the agent.
    Specify the full the JDBC URL properly not like localhost(until the DB is on same machine as your ODI).

  • How to pass a Variable value into an ODI Scenario from ODI Package

    I have created an Interface that uses the variable #ENTITY_ID for retrieving entity data from the DWH; now I have generated a Scenario from the interface and placed the Scenario in an ODI Package; am not sure how to pass the #ENTITY_ID variable to the ODI Scenario?
    Any help is greately appreciated.
    Best Regards
    Bee

    Hi Sutrtha,
    Yeah I got the pop up asking to select the variables used, I have selected ENTITY_ID that was used by the interfaces, but on execution of the package the Scenario did not work as the passeed variable #ENTITY_ID is set to 0 instead of the value I am passing.
    Am I missing something?
    Regards
    B

  • Error while invoking ODI Scenario from BPEL

    Hi,
    I have created a BPEL process for invoking ODI Scenario as mentioned in the http://www.oracle.com/technology/obe/fusion_middleware/odi/ODIscenario_BPELcallback/ODIscenario_BPELcallback.htm
    when i am deploying the process through console in i am getting this error Connection refused: connect..+
    outputVariable>
    -<part xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" name="payload">
    -<ODIProcessResponse xmlns="http://xmlns.oracle.com/ODIService">
    <conversationId>b7367ada046f7040:2c3c2fb3:123c698ac08:-7f49
    </conversationId>
    <result>Connection refused: connect
    </result>
    <elapsedTime>953
    </elapsedTime>
    <odiPlan>
    ========== OdiInformation =======
    - mSyncMode :SYNC
    - mScenarioName :TEST_INTERFACE
    - mScenarioVersion:001
    - mLogLevel :5
    - mContext :GLOBAL
    - mOdiHostname :localhost
    - mOdiHostPort :20910
    </odiPlan>
    </ODIProcessResponse>
    </part>
    </outputVariable>
    Regards,
    Ezhilan R.

    Hi, how are you?
    I did works including a parameter in my scenario and put value in this parameter on call scenario from BPEL. If i remove the parameter on the scenario and the call, its dont works.
    Try include a parameter in your scenario.

  • Invoking ODI Scenario from a BPEL process - Resolved

    I new to Oracle products.
    I am exploring Oracle Data Integrator tool.
    I would like to call ODI scenario from a BPEL process.
    I created a scenario in ODI, I have SOA suite10.1.3.3 installed in my machine.
    In some portal I have read that, we need to deploy apache axis to Oracle App server and then deploy the ODI public web service to axis. This public web service facilitates us to call scenario from partner link.
    Following are my questions:
    1) I guess Oracle App server acts as webservice container too. Why should I use apache axis here?
    2)If axis must be used, please let me know how to deploy it to OAS.
    If axis is not required, please guide me how to deploy public web service to OAS.
    Thanks!!

    Hi:
    I have similar problem, when invoke ODI Scenario from a BPEL Process, the error in ODI Designer is:
    java.lang.NullPointerException
         at com.sunopsis.dwg.dbobj.SnpSession.a(SnpSession.java)
         at com.sunopsis.dwg.dbobj.SnpSession.y(SnpSession.java)
         at com.sunopsis.dwg.dbobj.SnpSession.treatSessionPreTrt(SnpSession.java)
         at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
         at com.sunopsis.dwg.cmd.DwgCommandScenario.treatCommand(DwgCommandScenario.java)
         at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
         at com.sunopsis.dwg.cmd.e.i(e.java)
         at com.sunopsis.dwg.cmd.h.y(h.java)
         at com.sunopsis.dwg.cmd.e.run(e.java)
         at java.lang.Thread.run(Thread.java:595)
    In the BPEL Console the result is OK and process complete, but in the INVOKE scenario send message:
    <messages><ODI_REQUEST><part xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" name="part1"><invokeScenarioRequest xmlns="xmlns.oracle.com/odi/OdiInvoke/">
    *<RepositoryConnection xmlns=""*
    <JdbcDriver>oracle.jdbc.driver.OracleDriver</JdbcDriver>
    <JdbcUrl>jdbc:oracle:thin:@192.168.1.109:1521:ORCL</JdbcUrl>
    <JdbcUser>dimaster</JdbcUser>
    <JdbcPassword>sabr0sa</JdbcPassword>
    <OdiUser>SUPERVISOR</OdiUser>
    <OdiPassword>SUNOPSIS</OdiPassword>
    <WorkRepository>TESTWORKREP1</WorkRepository>
    </RepositoryConnection>
    *<Command xmlns="">*
    <ScenName>P_TRASPASOSOP09</ScenName>
    <ScenVersion>2</ScenVersion>
    <Context>Global</Context>
    <LogLevel>5</LogLevel>
    <SyncMode>0</SyncMode>
    <SessionName/>
    <Keywords/>
    <Variables>
    <Name/>
    <Value xmlns:ns1="http://xmlns.oracle.com/Recepcion">
    <ns1:Escenario>P_TRASPASOSOP09</ns1:Escenario>
    <ns1:Version>2</ns1:Version>
    <ns1:Contexto>Global</ns1:Contexto>
    <ns1:ID>1</ns1:ID>
    <ns1:NivelLogeo>5</ns1:NivelLogeo>
    </Value>
    </Variables>
    </Command>
    *<Agent xmlns="">*
    <Host>192.168.1.109</Host>
    <Port>20910</Port>
    </Agent>
    </invokeScenarioRequest>
    </part></ODI_REQUEST><ODI_RESPONSE><part xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" name="part1"><odi:invokeScenarioResponse xmlns:odi="xmlns.oracle.com/odi/OdiInvoke/">
    <odi:CommandResultType>
    <odi:Ok>true</odi:Ok>
    <odi:SessionNumber>445000</odi:SessionNumber>
    </odi:CommandResultType>
    </odi:invokeScenarioResponse>
    </part></ODI_RESPONSE></messages>

  • Invoking ODI scenario from BPEL using Asynchronous callbacks

    It has been given in many sites that for invoking an odi scenario, odi-public-ws.aar must be uploaded to AXIS2 framework as the web service uses AXIS2 as the web service container. For doing this first the AXIS2 should be deployed in OC4J.
    I am working with a scenario like this. I didnt deploy AXIS2 and neither uploaded the odi-public-ws.aar. Still i am getting the result as success. BPEL is invoking the ODI scenario and callback is happening too.
    I, also tried invoking ODI scenario in a remote system. Got the result for that too. I am using ODI 10.1.3.4 and J-Dev 10.1.3.3 and SOA suite 10.1.3.1.
    Can anyone suggest how without AXIS2 framework the process is success?

    Hi,
    Thanks its working now. I am facing another issue. I do not use parameters in my Scenario. Now when i run my scenario i m getting the following error. I think its because i have not assigned anything to the Variable element. I guess its taking null value for Variable element here and cheking if such a variable exists. Have you come accross such an issue? If so, please sugest remedy.
    java.lang.Exception: Specified variable not found in the Repository : null
         at com.sunopsis.dwg.dbobj.SnpSession.a(SnpSession.java)
         at com.sunopsis.dwg.dbobj.SnpSession.y(SnpSession.java)
         at com.sunopsis.dwg.dbobj.SnpSession.treatSessionPreTrt(SnpSession.java)
         at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
         at com.sunopsis.dwg.cmd.DwgCommandScenario.treatCommand(DwgCommandScenario.java)
         at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
         at com.sunopsis.dwg.cmd.e.i(e.java)
         at com.sunopsis.dwg.cmd.h.y(h.java)
         at com.sunopsis.dwg.cmd.e.run(e.java)
         at java.lang.Thread.run(Thread.java:619)
    Edited by: silas.john on May 13, 2009 1:29 AM

  • Is it possible to Call ODI Scenario from eBS Concurrent request

    Hi Experts
    We have a concurrent request running on oracle eBS system. Is it possible to Invoke the ODI Scenario (on a different server) by submitting a concurrent request. Mostly the concurrent program will be a PL/SQL
    Thanks in advance.

    hey,
    yeah its possible..
    Check this.
    /people/vanita.thareja2/blog/2006/05/23/bpm-sending-message-asynchronously-and-getting-the-response-from-synchronous-system-using-abap-proxies
    These replies too..
    Proxy in BPM
    BPM file to ABAP proxy
    Thanks,
    Vijaya.
    Edited by: Vijaya Lakshmi Palla on Jun 4, 2008 5:32 AM

  • Problems with the call of an ODI scenario from an OS Command.

    I'm having a trouble to understanding regarding the call an ODI scenario from an OS Command.
    On the machine "XPTO" is installed the Agent.
    For my local computer, by Designer ODI I can usually run the scenarios, using the Agent that is installed in the machine "XPTO".
    When attempting to run ODI scenario directly from the machine "XPTO", where we have the agent installed within the /Ora_Home/oracledi/bin the file STARTSCEN.BAT not exist.
    On the machine where you installed the agent I should also have the client installed, so as to be able to run the StartScen.bat?

    As suggested, I ran the following command line:
    *./startcmd.sh OdiStartScen -SCEN_NAME=STG_CRTC -SCEN_VERSION=001 -CONTEXT=GLOBAL -AGENT_CODE=ODI_2001*
    But gave the error below:
    com.sunopsis.core.f:*
    at com.sunopsis.tools.connection.DwgRepositoryConnectionsCreator.a(DwgRepositoryConnectionsCreator.java)*
    at com.sunopsis.tools.connection.DwgRepositoryConnectionsCreator.a(DwgRepositoryConnectionsCreator.java)*
    at com.sunopsis.tools.connection.DwgRepositoryConnectionsCreator.a(DwgRepositoryConnectionsCreator.java)*
    at com.sunopsis.tools.connection.DwgRepositoryConnectionsCreator.a(DwgRepositoryConnectionsCreator.java)*
    at com.sunopsis.security.c.b(c.java)*
    at com.sunopsis.security.c.b(c.java)*
    at com.sunopsis.dwg.function.SnpsFunctionBaseRepositoryConnected.u(SnpsFunctionBaseRepositoryConnected.java)*
    at com.sunopsis.dwg.function.SnpsFunctionBaseRepositoryConnected.execute(SnpsFunctionBaseRepositoryConnected.java)*
    at com.sunopsis.dwg.tools.StartScen.main(StartScen.java)*
    at com.sunopsis.dwg.tools.OdiStartScen.main(OdiStartScen.java)*
    Can anyone help me?

  • How to execute ODI scenario from a web application

    Hi
    I need to execute ODI scenario from ApEx form.
    how to execute ODI scenario from application. Using 10.1.3.5.5
    -app

    In the SQL property of the TQuery object, enter the call as an anonymous block:
    begin
      pkg_name.procedure_name(true);
    end;

  • ODI Scenario Hang on ODI Procedure

    Hi Experts,
    We have one ODI scenario which consists of a few ODI procedure steps with anonymous PL/SQL block. When one procedure takes a long time to process data (>60min. when data volume is large), the ODI scenario hangs intermittently on the procedure (ODI Operator shows Running state and no progress to next step in Scenario). The pl/sql script finished fine when running against database directly processing the same dataset.
    When the ODI step hangs, the database side where the pl/sql runs on has no more activities, and the db session(v$session) which processes the ODI procedure goes away as well (db session not existing on db anymore). But the ODI Operator still shows the step in running state and hangs there forever (days). The jdbc connection from ODI to db looks fine.
    How can we fix this problem in ODI? The ODI version is 10.1.3.5.
    Appreciate your input on this.
    Thanks,

    The doc said "If your command is being executed in a transaction (numbered 0 to 9)" then I should set 'Commit'. But I used 'Autocommit' for transaction, is the 'Commit' necessary here?
    Thanks!

Maybe you are looking for