Automatic Activation in cons

Hi,
I know that when I activate my activity the changes from dev inactive get integrated with dev active. And after I release the activity and import into cons it is available both in cons inactive and cons active. This activation in cons is not clear to me. Is there any automatic activation in cons?
As far as I know developers work in dev workspace and cons is not touched? Why do we have inactive/active workspace in cons?
Any inputs here would be useful to me.
Thanks & Regards,
Akshatha

Hi,
Consolidation system link might be helpful to you.
Ashu

Similar Messages

Automatic Active Sync failed to Start at appropriate time

Hellos,
Its holiday season here. We had a FF Active Sync process that failed to start up.
Ops noted an overheating CPU at 2am. Server was brought down.. App server stopped, Database stopped. Fan fixed and Server rebooted.. Database started Ok, App server started Ok.. according to AS Log idM started up ok... but the 'automatic' Active Sync process refused to start.
What could prevent it?!
I have seen various people's opinions.. e.g.
"Hi,
There can be lot of reasons , for not starting activesync.
if you are using activesync between SIM and database ,
then lets start from activesync wizard ,
1)check the i/p activesync form(version should be correct)
2)check the startup type
3) if you are using query based activesync
check the first and last predicate fields and you need to ensure that the logic you have used in i/p activesync form will generate some processing once you start active sync otherwise you will not see active sync in executing state.
you can check weather activesync has performed operation or not in IAPI in the debug page under configurator
if your CPU utilisation on server is very high activesync will not start
these are general things
if you can give some more specific details abt your application and problem i can help you out.
Warm Regards,
Gajanan"
This process had been left unstarted for some time. Noone checked.. why should they.. its automatic (obviously IdM isnt an R.E.M. fan)
Surely an automatic start type should (re)start after a reboot for hardware reasons!
Is the only thing we can we put in a Solaris shell script to test that these ****ing active sync process have been started and are running after a reboot/restart of App.server is a date test of the log file? i.e. if log file has not been touched in x days raise an alarm... seems something that is better built into IdM than a script.
How has this problem been faced and met by others out there? I am sure we are not the only people who have had to shutdown and restart IdM.

Indeed it does. The problem is that a log is just that.. a log of what has happened. In our case the 'automatic' AS process failed to start automatically.
We are forced to use the log and reverse apriori reasoning to detect whether the AS process actually started.
I hope you agree this situation isnt really satisfactory, is it?

Error : An error occurred while automatically activating bundle org.eclipse

Hi,
OpenScript closed with unsaved changes and now I cannot get it to open again. I checked out the logs it was giving the below error.
!ENTRY org.eclipse.core.resources 2 10035 2013-03-28 10:05:18.046
!MESSAGE The workspace exited with unsaved changes in the previous session; refreshing workspace to recover changes.
!ENTRY org.eclipse.osgi 4 0 2013-03-28 10:05:18.062
!MESSAGE An error occurred while automatically activating bundle org.eclipse.core.resources (326).
!STACK 0
org.osgi.framework.BundleException: Exception in org.eclipse.core.resources.ResourcesPlugin.start() of bundle org.eclipse.core.resources.
I do not mind losing the file with the unsaved changes. Please let me know if anyone has faced a similar problem and the solution for the same.
Thanks!

Hi,
OpenScript closed with unsaved changes and now I cannot get it to open again. I checked out the logs it was giving the below error.
!ENTRY org.eclipse.core.resources 2 10035 2013-03-28 10:05:18.046
!MESSAGE The workspace exited with unsaved changes in the previous session; refreshing workspace to recover changes.
!ENTRY org.eclipse.osgi 4 0 2013-03-28 10:05:18.062
!MESSAGE An error occurred while automatically activating bundle org.eclipse.core.resources (326).
!STACK 0
org.osgi.framework.BundleException: Exception in org.eclipse.core.resources.ResourcesPlugin.start() of bundle org.eclipse.core.resources.
I do not mind losing the file with the unsaved changes. Please let me know if anyone has faced a similar problem and the solution for the same.
Thanks!

Create Process via Global Automatic activity

Hi!
I´m trying to automatize some process, that can auto-execute one time at a day. For this, i'm thinking of use the global automatic activity, and I 've scheduled to execute (for testing) every minute. But this never happends
If the global has no bp.Method inside, obviusly, nothing happends. Hence, when i wrote this code:
logMessage "Se ha iniciado el proceso de consulta de calendario a las:" +'now'
using severity = INFO
ProcessInstance.create(processId : "/ConsultarCalendarioCompras", arguments : null, argumentsSetName : "")
how could i solve this?
Thanks

Hi,
Are you seeing your log INFO statement in the log file every minute? Assuming you are, I think all you're missing is a valid value for the third parameter. Try changing your logic to this:
ProcessInstance.create(processId : "/ConsultarCalendarioCompras",
arguments : null, argumentsSetName : "BeginIn")
. . .Once you get this working, take a look at this thread for information on how to pass in argument variables into the work item instance using the second parameter: Re: How to create Instace of another process from running process.
Hope this helps,
Dan

Automatic Activation of change list

HI All,
I have two questions regarding Change list.
1) User "1" has imported one TPZ file, does user "2" have the rights to activate it in the Change list.
2) Is there any way to achive automatic activation as soon as you import a TPZ file in IR or ID with out manual activation.
Regards,
Raj
Thanks in Advance.

Hi,
I think you can do it this way...
goto the changelist and choose the change list of USer1 and then try to activate it.
I have never tried this.but you can try.
Rgds,
Kumar

Automatic activation solution

Hi,
Is there a solution for making automatic activation for Microsoft products (Windows and Office, maybe more)?
We currently have VAMT server and one user does the activation for all sites. As we are growing, we need MS products to be activated once the computer is joined to the domain without giving any key to anyone. Is that possible?
Thank you
Systems Engineer

What kind of key is on your 'VAMT server'
The solution you're looking for is called KMS. You'll pick a server that all clients can reach on TCP 1688, and the ability to resolve the dns record in your zone ( _vlmcs._tcp.<domain>) and install a KMS product key on. You install it
just like any other key, but the key itself will enable the KMS role.
Once that is installed, you'll need to have enough clients to 'turn on' the activation process. The number of required clients changes per product:
Office products require 5 unique clients to check in
Servers require 5 unique clients.
Workstations (Win7 and 8 only) require 25.
If you have those numbers on your network, you're good to install KMS.
http://technet.microsoft.com/en-us/library/ff793416.aspx
Chris Ream

WebService call from Automatic Activity

hi all,
my automatic activity consume the webservice. then my work flow stop in that activity and i found the following error message inside my log.
actually my webservice is working properly even my BPM workflow stop there. And there is not other code except webservice call.
The task could not be successfully executed.
Reason: 'org.xml.sax.SAXParseException: Premature end of file.'.
Caused by: Premature end of file.
fuego.lang.ComponentExecutionException: The task could not be successfully executed.
Reason: 'org.xml.sax.SAXParseException: Premature end of file.'.
     at fuego.soaptype.SoapObject.invoke(SoapObject.java:321)
     at fuego.lang.Invokeable.invokeImpl(Invokeable.java:234)
     at fuego.lang.Invokeable.invokeDynamic(Invokeable.java:188)
     at Stars21BPM.Intray.Default_1_0.Instance.CIL_automatic(Instance.xcdl:12)
     at Stars21BPM.Intray.Default_1_0.Instance.CIL_automatic(Instance.xcdl)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at fuego.component.ExecutionThreadContext.invokeMethod(ExecutionThreadContext.java:512)
     at fuego.component.ExecutionThreadContext.invokeMethod(ExecutionThreadContext.java:273)
     at fuego.fengine.FEEngineExecutionContext.invokeMethodAsCil(FEEngineExecutionContext.java:219)
     at fuego.server.execution.EngineExecutionContext.runCil(EngineExecutionContext.java:1280)
     at fuego.server.execution.microactivity.ComponentExecutionMicroActivity.runCil(ComponentExecutionMicroActivity.java:126)
     at fuego.server.execution.microactivity.ComponentExecutionMicroActivity.execute(ComponentExecutionMicroActivity.java:84)
     at fuego.server.execution.microactivity.MicroActivityEngineExecutionHandler.executeActivity(MicroActivityEngineExecutionHandler.java:57)
     at fuego.server.execution.ImmediateActivity.execute(ImmediateActivity.java:42)
     at fuego.server.execution.DefaultEngineExecution$AtomicExecutionTA.runTransaction(DefaultEngineExecution.java:304)
     at fuego.transaction.TransactionAction.startBaseTransaction(TransactionAction.java:470)
     at fuego.transaction.TransactionAction.startTransaction(TransactionAction.java:551)
     at fuego.transaction.TransactionAction.start(TransactionAction.java:212)
     at fuego.server.execution.DefaultEngineExecution.executeImmediate(DefaultEngineExecution.java:123)
     at fuego.server.execution.DefaultEngineExecution.executeAutomaticWork(DefaultEngineExecution.java:62)
     at fuego.server.execution.EngineExecution.executeAutomaticWork(EngineExecution.java:42)
     at fuego.server.execution.ToDoItem.executeAutomaticWork(ToDoItem.java:251)
     at fuego.server.execution.ToDoItem.run(ToDoItem.java:536)
     at fuego.component.ExecutionThread.processMessage(ExecutionThread.java:775)
     at fuego.component.ExecutionThread.processBatch(ExecutionThread.java:755)
     at fuego.component.ExecutionThread.doProcessBatch(ExecutionThread.java:142)
     at fuego.component.ExecutionThread.doProcessBatch(ExecutionThread.java:134)
     at fuego.fengine.ToDoQueueThread$PrincipalWrapper.processBatch(ToDoQueueThread.java:446)
     at fuego.component.ExecutionThread.work(ExecutionThread.java:839)
     at fuego.component.ExecutionThread.run(ExecutionThread.java:408)
Caused by: org.xml.sax.SAXParseException: Premature end of file.
     at com.sun.org.apache.xerces.internal.util.ErrorHandlerWrapper.createSAXParseException(Unknown Source)
     at com.sun.org.apache.xerces.internal.util.ErrorHandlerWrapper.fatalError(Unknown Source)
     at com.sun.org.apache.xerces.internal.impl.XMLErrorReporter.reportError(Unknown Source)
     at com.sun.org.apache.xerces.internal.impl.XMLErrorReporter.reportError(Unknown Source)
     at com.sun.org.apache.xerces.internal.impl.XMLVersionDetector.determineDocVersion(Unknown Source)
     at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(Unknown Source)
     at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(Unknown Source)
     at com.sun.org.apache.xerces.internal.parsers.XMLParser.parse(Unknown Source)
     at com.sun.org.apache.xerces.internal.parsers.AbstractSAXParser.parse(Unknown Source)
     at javax.xml.parsers.SAXParser.parse(Unknown Source)
     at org.apache.axis.encoding.DeserializationContext.parse(DeserializationContext.java:227)
     at org.apache.axis.SOAPPart.getAsSOAPEnvelope(SOAPPart.java:696)
     at org.apache.axis.Message.getSOAPEnvelope(Message.java:424)
     at org.apache.axis.handlers.soap.MustUnderstandChecker.invoke(MustUnderstandChecker.java:62)
     at org.apache.axis.client.AxisClient.invoke(AxisClient.java:206)
     at org.apache.axis.client.Call.invokeEngine(Call.java:2765)
     at org.apache.axis.client.Call.invoke(Call.java:2748)
     at org.apache.axis.client.Call.invoke(Call.java:2424)
     at org.apache.axis.client.Call.invoke(Call.java:2347)
     at org.apache.axis.client.Call.invoke(Call.java:1804)
     at fuego.soaptype.SoapCall.invoke(SoapCall.java:234)
     at fuego.soaptype.SoapObject.invoke(SoapObject.java:309)
     ... 32 more

Hi waiphyo, did you find the reason of this problem? I'm getting the same error on my Enterprise Server. When I launch, in studio, the deployed webservices, the wsdl is rendered fine, but on server i got this error...
org.xml.sax.SAXParseException: Premature end of file.
     at com.sun.org.apache.xerces.internal.util.ErrorHandlerWrapper.createSAXParseException(Unknown Source)
     at com.sun.org.apache.xerces.internal.util.ErrorHandlerWrapper.fatalError(Unknown Source)
     at com.sun.org.apache.xerces.internal.impl.XMLErrorReporter.reportError(Unknown Source)
     at com.sun.org.apache.xerces.internal.impl.XMLErrorReporter.reportError(Unknown Source)
     at com.sun.org.apache.xerces.internal.impl.XMLVersionDetector.determineDocVersion(Unknown Source)
     at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(Unknown Source)
     at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(Unknown Source)
     at com.sun.org.apache.xerces.internal.parsers.XMLParser.parse(Unknown Source)
     at com.sun.org.apache.xerces.internal.parsers.AbstractSAXParser.parse(Unknown Source)
     at javax.xml.parsers.SAXParser.parse(Unknown Source)
     at org.apache.axis.encoding.DeserializationContext.parse(DeserializationContext.java:227)
     at org.apache.axis.SOAPPart.getAsSOAPEnvelope(SOAPPart.java:696)
     at org.apache.axis.Message.getSOAPEnvelope(Message.java:424)
     at org.apache.axis.server.AxisServer.initSOAPConstants(AxisServer.java:345)
     at org.apache.axis.server.AxisServer.invoke(AxisServer.java:279)
     at fuego.soaptype.AxisSoapService.invoke(AxisSoapService.java:357)
     at fuego.soaptype.AxisSoapService.invoke(AxisSoapService.java:122)
     at fuego.webservices.HttpSoapListener.process(HttpSoapListener.java:206)
     at fuego.http.HttpExecution$1.run(HttpExecution.java:71)
     at fuego.component.Message.process(Message.java:576)
     at fuego.component.ExecutionThread.processMessage(ExecutionThread.java:780)
     at fuego.component.ExecutionThread.processBatch(ExecutionThread.java:755)
     at fuego.component.ExecutionThread.doProcessBatch(ExecutionThread.java:142)
     at fuego.component.ExecutionThread.doProcessBatch(ExecutionThread.java:134)
     at fuego.http.HttpExecution$HttpPrincipal.processBatch(HttpExecution.java:190)
     at fuego.component.ExecutionThread.work(ExecutionThread.java:839)
     at fuego.component.ExecutionThread.run(ExecutionThread.java:408)
thanks

How to abort instances which are stuck in automatic activity

Hi,
Some of the instances are got stuck in automatic activity of a process, how can we abort those instances. In engine db - PPROCINSRANCE table i am able to see the instances but PTODO table, it doesn't have any records.
As we didn't had proper configuration and exception handling, it failed to execute and instances got stuck.
Any suggestions?
-Sree

Hi,
Execute the following query:
DELETE FROM PPROCINSTANCE WHEER INSTID = "<Instance_id_to_be_deleted>";
For soft delete execute & commit the following query:
UPDATE PPROCINSTANCE SET STATE=64 WHERE INSTID= "<Specify_Instance_Number>";
Hope it helps you.
Bibhu

Trigger a Begin event running Global Automatic activity

Hi
I have a situation explained as follows:
The BPM Process flow would be triggered when a message comes into a JMS Queue.
I have configured the JMS Messaging Service as an external resource and used a Global Automatic Activity as an Automatic JMS Listener to listen on that queue.
Once the message is received on the queue, I want my actual process flow to be instantiated and activities following the begin activity to be executed.
In the Studio Reference document, it is mentioned that
You can trigger a Begin event running Global Automatic activity.
Can someone tell me the steps to trigger the Begin Event from Global Automatic Activity and create the process instance.
Thanks

You have to call this method
ProcessInstance.create(arguments : args, argumentsSetName : "BeginIn")
Args is Any[String] where you put you input arguments that you have in your begin activity and BeginIn is the set of arguments you have in the begin activity.
HTH

Transfer value from global automatic activity in Aqualogic BPM Suite

Hi, I am new to Aqualogic BMP suite and stuck with the following problem :
In aqualogic bpm suite, if we are setting some values to some variables in a global automatic activity in a process how to get those values back in some other activities (say an Interactive activity) in the same process or how to assign the values to some instance variables in the Begin activity ??
We have a scenario where we are creating some process instances from the Global Automatic activity using the following :
args["name"] = abc
create ProcessInstance using parameters = args
Now how to get the value "abc" and assign this value to an instance variable in the Begin activity(/access the value "abc" in an interactive activity)within the same process.
Thanks,
Suman.

Hi,
Let's say you have an Argument Set defined in your Begin activity called BeginIn. The arguments in this Argument Set can be "a", "b" and "c" of type String, Int and boolean accordingly.
If you want to use the ProcessInstance.create method, then you would need to have a PBL script like this one:
args[] = [ "a" : "SomeStringLiteral", "b" : 1234, "c" : true ];
ProcessInstance.create(processId : "/MyProcess", arguments : args, argumentsSetName : "BeginIn");
HTH,
eduardoc.

Aborting an Automatic Activity from OBPM 10GR3 workspace

Hi all,
I can abort Interactive Activities from the OBPM 10GR3 workspace just by selecting that instance, the selecting the action as ABORT from the BULK ACTIONS on the right hand side and the entire instance is aborted.
But how do I abort Automatic Activities from the OBPM 10GR3 workspace?
When my instance arrives at an automatic activity, I am unable to abort it from the BPM workspace.
There is no option when you right click an Automatic Activity and select RUNTIME , which says, "If enabled, the instance can be aborted by the user".
So how do we do that ( from the OBPM 10GR3 Workspace)?

The "If enabled, the instance can be aborted by the user" needs to be selected when you abort via PAPI...
Since aotumatic activitys do not appear in the workspace you cannot abort them from there.
You can connect via PAPI, find the instance and abort it from another instance.
Even though must automatic activitys are built so they finish before you can even go and abort them.
I think its a strange design to have an aotumatic activity that is up long enough for you to cancel it but as i said above...
1) Select abortable on the activity.
2) Find the instance and abort
Fuego.Papi.InstanceFilter ifilter = new InstanceFilter();
ProcessService.connectTo(url : Fuego.Server.directoryURL, user :<username>, password : <password>);
ifilter.create(processService : ProcessService);
ifilter.searchScope = new SearchScope(participantScope : ParticipantScope.ALL , statusScope : StatusScope.ONLY_INPROCESS);
//Notice i write public variable and not instance variable
ifilter.addAttributeTo(variable : <public variable (such as description or one of your own)>, comparator : Comparison.<the one that fits you>, value : <value>);
Fuego.Papi.Instance[] cInstances = ProcessService.getInstancesByFilter(filter : ifilter);
foreach (instance in cInstances)
//Second type of filtering (checking current activity and process), you can check just the activity name if its a unique name
if (instance.activityName == <aotumatic activity name> && instance.processId.contains(regexp : '/<process name>/'))
instance.abort();
I use a similer code snippet to remove Interactive activities.
Just notice that you filter only the instances you really want to take down.

Using ProcessService in Automatic Activity

I want to use the ProcessService inside an Automatic Activity to search for a process instance already dealing with a contract (no 2 or more process instances are allowed to work on the same contract). The following code works perfectly:
ProcessService ps;
ps.connectTo(url : Fuego.Server.directoryURL, user : "pelo", password : "pelo");
InstanceFilter instanceFilter;
instanceFilter.create(processService : ps);
SearchScope searchScope =
new SearchScope(ParticipantScope.ALL,StatusScope.ONLY_INPROCESS);
instanceFilter.searchScope = searchScope;
instanceFilter.addAttributeTo(variable : "caseId", comparator : Comparison.CONTAINS, value : "GN" + contractNummer);
Instance[] instances = ps.getInstancesByFilter(filter : instanceFilter);The problem here is that the connectTo method contains the user and password. Is there any other way to get a ProcessService instance differently in an automatic activity? Or is it possible to get the credentials to be used in the connectTo method?

Pelo,
To avoid burying connection credentials in source code, you might specify them as Business Parameters (under Organization). That way they can be configured at run time.
I hope this helps, but I also hope you get a better suggestion.
John

Global Automatic Activity - Process to Process

Hi,
How can we invoke another process from one process using a Global automatic activity..Is PAPI the only way? How can we use PAPI code inside of a Global Automatic Activity to call another process?v Any examples?
Edited by: user647659 on Oct 27, 2008 11:02 PM
Edited by: user647659 on Oct 28, 2008 11:49 AM

I am not sure what you saying..Did u mean Global Creation ? But that would have a user to invoke the process..I want to invoke it automatically...I got a part of the answer...But it takes all instances..and creates multiple instances..I want to isolate the instances previously been transferred..What I am doing is ..Using a Global Automatic to invoke the other process.Writing a PAPI code to call the other process from this process...and Polling By Interval every 1m..
Here is a code:-
ProcessService ps;
ps.connectTo(url : Fuego.Server.directoryURL, user : (String)BusinessParameter.getValue(name : "USER_NAME"), password : (String)BusinessParameter.getValue(name : "PASSWORD"));
logMessage("Process Service connected--->" );
businessProcess = ps.getProcess(process : "StartProcess");
InstanceFilter instanceFilter;
instanceFilter.create(processService : ps);
SearchScope searchScope = new SearchScope(ParticipantScope.ALL,StatusScope.INPROCESS_AND_COMPLETED);
instanceFilter.searchScope = searchScope;
result2 = businessProcess.getInstancesByFilter(filter : instanceFilter);
logMessage("Length ==>" +length(result2));
length = length(result2);
logMessage("Length Transferred==>" +length);
test["name"] = "testing";
if(length > 0)
     for(int i=0; i < length; i++)
          ProcessInstance.create(arguments : test, argumentsSetName : "BeginIn");
else
     logMessage("length is-->" + length);
length = 0;
Any suggestions on how to isolate the previous obtained instances would be appreciated..
Thanks,

ERROR: cannot grab an automatic activity

Hi,
I am trying to showcase the GRAB activity. I am able to grab from a timer wait and interactive. I wanted to depict the GRAB from an automatic activity. To simlate a 'long running' automatic activity, i put a thread.sleep() (wait) in it.
Can anyone let me know if it is an expected behavior ? (this being a thread.sleep for wait). And if yes, how can i simulate a long-running automatic which can be grabbed?
Regards,
user8702013
PS: when i try to grab the above activity, i get an error as below:
Instance '/Process#Default-1.0/1/0' could not be grabbed in activity 'Automatic2'. Details:
Instance '/Process#Default-1.0/1/0' could not be locked because participant 'Server' is currently locking it.
fuego.papi.exception.CannotLockInstanceException: Instance '/Process#Default-1.0/1/0' could not be locked because participant 'Server' is currently locking it.
     at fuego.server.ProcInstOwner.createLockException(ProcInstOwner.java:119)
     at fuego.server.AbstractInstanceService.getLocked(AbstractInstanceService.java:148)
     at fuego.server.execution.EngineExecutionContext.acquireCurrentInstance(EngineExecutionContext.java:1692)
     at fuego.server.execution.EngineExecutionContext.preImmediateExecution(EngineExecutionContext.java:1509)
     at fuego.server.execution.DefaultEngineExecution$AtomicExecutionTA.runTransaction(DefaultEngineExecution.java:295)
     at fuego.transaction.TransactionAction.startBaseTransaction(TransactionAction.java:470)
     at fuego.transaction.TransactionAction.startTransaction(TransactionAction.java:551)
     at fuego.transaction.TransactionAction.start(TransactionAction.java:212)
     at fuego.server.execution.DefaultEngineExecution.executeImmediate(DefaultEngineExecution.java:123)
     at fuego.server.execution.DefaultEngineExecution.executeWithoutComponentImmediate(DefaultEngineExecution.java:199)
     at fuego.server.execution.EngineExecution.executeWithoutComponentImmediate(EngineExecution.java:95)
     at fuego.server.AbstractProcessBean.instanceGrab(AbstractProcessBean.java:3947)
     at fuego.server.AbstractProcessBean.instancesGrab(AbstractProcessBean.java:2140)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at fuego.lang.JavaClass.invokeMethod(JavaClass.java:1410)
     at fuego.lang.JavaObject.invoke(JavaObject.java:227)
     at fuego.component.Message.process(Message.java:585)
     at fuego.component.ExecutionThread.processMessage(ExecutionThread.java:780)
     at fuego.component.ExecutionThread.processBatch(ExecutionThread.java:755)
     at fuego.component.ExecutionThread.doProcessBatch(ExecutionThread.java:142)
     at fuego.component.ExecutionThread.doProcessBatch(ExecutionThread.java:134)
     at fuego.fengine.FEngineProcessBean.processBatch(FEngineProcessBean.java:244)
     at fuego.component.ExecutionThread.work(ExecutionThread.java:839)
     at fuego.component.ExecutionThread.run(ExecutionThread.java:408)

I'm not sure there's a good answer to your question. Grabbing from an automatic activity seems counter productive to me. I must ask why do you want to "Showcase" grabbing from an automatic activity anyway?
Automatics shouldn't take long time to run and so there shouldn't be a need to grab them. If the automatic will take a long time, they need to be divided up in to smaller work units. This can be done in a split-n/join. Long running threads will time-out. You don't want to hang up engine threads in an automatic. I would think long-running activities can be broken down into shorter running work units. It would be better to show grabbing from an exception handling routine. This is where problematic automatics should end up if they are taking to long or need to be grabbed and moved do to some problem.
HTH

A few process instances in automatic activity simultaneously

Hi
I am creating and initiating new process instance using Global Creation activity. I have put screenflow in Global Creation. An instance after completing the screenflow in Global Creation activity goes to BeginIn of the process. When I test it many times I get only from time to time warning:
Instance '/BackgroundUpdate#Default-1.0/157/0@xxx' is not in activity '/BackgroundUpdate#Default-1.0/doUpdate'.
Details: Instance is in activity '/BackgroundUpdate#Default-1.0/WaitToProcessNextPackage' and has status 'RUNNING (1)'.
"doUpdate" and "WaitToProcessNextPackage" are activities (automatic components) placed after Begin in the process ("doUpdate" is subsequent for BeginIn and "WaitToProcessNextPackage" is subsequent to "doUpdate" activity). When I get this warning no logic is executed for the process instance in "doUpdate" activity.
How to solve it? Only one process instance created with Global Creation activity can be in one automatic activity? If there two process instances simultaneously in automatic activity, then one them won't be processed?
Thank you in advance
Regards
Peter
Edited by: Piotr85 on Apr 21, 2010 6:03 AM

what does they means by service thing here,,,,and how do we specify it? or use it?
Any application running in Oracle RAC clusterware is considered as a service. What is a service in the windows,its kinda same. If its a part of RAC and an application and running,its service.
Read from here about services,
http://download.oracle.com/docs/cd/B19306_01/server.102/b14220/mgmt_db.htm#sthref2266
If you don't know RAC yet, better is to leave it.Its the core of RAC if you ask me.
does resource_consumer_grp and Service name parameter in job class definition are mutual exclusive?or not
Did you check in the docs for the same?
HTH
Aman....

Automatic Activation in cons

Similar Messages

Maybe you are looking for