Automatic Cursor Movement in one Graph, in accordance to the cursor in another graph

I am using two XY graphs each with 4 cursors. I want to assign each cursor of graph A to each cursor of graph B such that the corresponding cursors in graph B moves in accordance to the cursors in graph A.
 I have used Active cursor, Cursor.PosX and it works for one cursor. However when I use the same concept to change the active cursor value and faciliate the automatic movement for all cursors they do not work.
Message Edited by Chathuri on 08-13-2009 06:26 AM
Solved!
Go to Solution.

Hi,
As requested I would like to post the solution as to how I tacked the problem. It was actually small mistake on my part. When I connect the two property nodes for each XY graphs I should connect ActiveCursor to ActiveCursor and Cursor.PosX to Cursor.PosX. What I did was connect the Active cursor of A graph to the cursor.index of B graph. I have attached a small screen shot of connecting the first cursor of A graph to the 1st cursor of B graph so that the cursor in B graph follows the cursor in A graph.
In order to connect more cursors as in my case, the only change to be made is the change in the Acitve cursor constant to, 1,2,......
Chathuri
Attachments:
CursorMovement.JPG ‏7 KB

Similar Messages

  • Set the css style of text in a column according to the value of another col

    I'd like to set the css style of text in a column according to the value of another column. Each field may end up with a different style of text as a result, for instance.
    Any ideas? I looked thru the forums but couldn't find anything.
    Thanks,
    Linda

    Does the class=”t7Header” make it into the rendered HTML?
    ---The text "class="tHeader" does not show but the other text is rendered using the style t7Header as defined in the stylesheet! Exactly what I wanted.
    You might want to use a div or a span instead of a p.
    ---Yes -
    What's very cool is we can create a display column that is dynamically filled with the html and style wrappers based on a lookup to see what style should be applied according to the actual data value. This is critical as our tables are all dynamic so I can't depend on using the additional APEX methods to control the display of a column (as the # of columns in the view vary from instance to instance) and I did not want the display specs to muddy up my SQL queries.
    I wonder why this is not well documented. It is so easy!
    Thanks again for your help.
    Linda

  • Cursor moves when in tablet mode (screen touching the pointing stick on an X220T)

    Hi there,
    when I put my X220T in tablet mode, the screen moves just enough to move the pointing stick in the middle of the keyboard to cause the cursor to move. I can't rest my hand on the screen without causing the cursor to move all the way accross the screen.
    Am I missing a driver that would disable the nub when the screen is turned over it, or is this a design oversight? I've got the latest BIOS.
    Cheers,
    Kimmo
    http://vanhavirta.fi/
    Solved!
    Go to Solution.

    Nevermind, I was too hasty: https://forums.lenovo.com/t5/X-Series-Tablet-ThinkPad-Laptops/X220-TrackPoint-Wandering-in-Tablet-Mo...
    http://vanhavirta.fi/

  • Dispaying a waveform graph with control of the cursor in the document.

    I would like to be able to control the cursor when I save my waveform graph in html. I'm currently saving the graph through the report vi's

    I am not sure I understand your question. Do you want to simply control where the cursor is on the picture you are appending to the html report. If so then when you use the Append Control Image to Report VI it basically takes a snap shot at that moment and displays it. Therefore you just need to place the cursor where you wnat it before you add the image.
    To programttically control the cursor you will need to use property nodes of the Waveform Graph. A good start would be the property cursor>>cursor position>>all elements.

  • How do I copy and paste a gradient color from one document and then use the gradient on another document?

    I am making business cards. On the back of the cards there are two lines with gradients. Below is a card with a magenta gradient. I want to select both lines and change the magenta gradient to the orange gradient from the file below. How do I do this? (I do not want to copy a paste the orange lines and then move them over the magenta ones.) I just want to select the magenta lines and change their color to the orange gradient. This will insure absolute alignment. I want to do repeat the process with several other gradients too. Thank you.

    David,
    As I (mis)understand it, you may:
    1) Copy one orange gradient path to the magenta gradient path document;
    2) Select the two magenta gradient paths and change the Fill to None;
    3) Select the orange gradient path;
    4) Select the two magenta gradient paths and change the Fill to Gradient.
    That should give you the desired replacement. For multiple use of the same gradient, you may consider a gradient swatch.

  • Speed dial only has one icon, to open up the windows. Another used to be on the other end of the tool bar for entering websites into the windows. Also do not know how to form another group.

    I have just downloaded Firefox into a new computer. The firefox I had in my old computer had one (9 pt) icon at one end that brought up the speed 9 speed dial windows. It also had another similar icon at the other end of the tool bar that you could click on and place a website you were looking at into a particular window. This add on does not have that feature, which makes it very hard to make entries into the windows.
    Also I have not found the way to add other groups of windows as I had before. I could even label them in categories. What to do?
    My Computer is an HP p6653w and my default browser is Firefox 3.6
    My operating system is windows 7.

    Hi,http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03149924&cc=uk&dlc=en&lc=en#N89
    First, I am sorry to see your experience, however be aware that this forum is a peer-to-peer community and not a direct contact with HP.
    To clarify, the product specification do list the ink cartridges regionalization, the specifications itself reffer to HP Suresupply to locate the ink cartridges for your region, as well as the following document which clearly state that information:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03239171&tmp_task=prodinfoCategory&cc=uk&dlc=en...
    Firs be sure to have the latest software installed prior contacting HP support, which should be listed as 28
    You may find that information listed in the following document (Check the How can I tell which driver version I have? section), if you have any older version be sure to uninstall it and install the latest software, as listed within the same document:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03149924&cc=uk&dlc=en&lc=en#N89
    If you need, the latest software can be found below:
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-108821-3&cc=uk&dlc=en&lc=en...
    Next ensure you have any of the 564 ink cartridges, once the printer being reset it require all the 4 ink cartridges to work
    Finally check the private messages I sent you prior contacting HP support , the envelope icon at the top-right part of that screen.
    The ensure you use the correct contact details lease double chekc it below:
    http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1
    Regards,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Is it possible to render previews on one computer while working on the project on another?

    Hi!
    Even with CS5 and a cuda card I still need to render a lot since I'm using lossless image sequences as my intermediate forms.
    Would it be possible to take advantage of having multiple computers while working with Premiere? Maybe one computer could be dedicated just for preview rendering while the other one could be used for regular editing simultaneously? Is there anything on the market that does this?
    I welcome any discussion on the subject!
    Thanks!

    About the only thing you can do with Premiere is export out a sequence in the background while you continue working, then bring that back into Premiere and lay it down above the original sequence.
    Of course, if you wish to continue working on the same sequence, this won't work.
    Background rendering would be a very welcome addition to Premiere.  Hell even Encore can do that.
    https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

  • How do I populate one dropdown list based on the selection in another dropdown list?

    I have one dropdown list that has 21 choices.  Depending on the selection of those 21 choices, I have another dropdown list that will select a different subset of choices from a pool of 96 choices.  How do I get this to happen?

    I have one dropdown list that has 21 choices.  Depending on the selection of those 21 choices, I have another dropdown list that will select a different subset of choices from a pool of 96 choices.  How do I get this to happen?

  • Hi, I have a large number of products in one column and prices of the products in another. Most prices are different. I want to know if it is possible to increase all of the prices by 5% or 10% etc. Hope someone can help. From Stiffy

    Hi, This is my first time I hope someone can help.
    I am working with numbers and I have a large number of products in one column and the relevent prices in another. All the prices are different and I want to increase the price of everything by 5% or 10% etc. Is this possible?
    Thanks in advance
    Stiffy123

    Ad a new, temporary column (or one you can hide when not using). Let's say the current Prices are in column C and the new column is D.
    you can inflate the prices in column C by 5% by entering the formula in the first cell of column D as:
    =C2*105%
    likes this:
    to fill down, select D2, then copy, then select the D3 thru the end of the column, then paste.  Now select C2 thru the end of column C, now paste over the existing values using the menu item "Edit > Paste Values"
    you can now hide column D until you need to use it again.

  • I want to use the audio from one of my clips and the video of another can I do this?

    I have two different video clips that I took from my still camera. I want to use the audio from one of the clips and the video from the other at the same time in imovie can I do this and if yes how

    Yes.
    First go to iMovie/Preferences and make sure that the Advanced Tools are enabled.
    Now, drag the clip with the Video into the project.
    Drag the clip with the Audio and drop it on the first clip at the frame where you want it to begin. A popup menu should appear. Choose Audio Only. You may then want to open Inspector for the video clip (by clicking the little gear icon at the top left of the clip) and going to the audio tab. Here you can turn down the volume of the video clip, so that all you hear is the audio clip.
    Another way. Put the video clip that has the Audio you want in first. Then drag the clip with the video you want and drop it on the clip that has the audio you want. A popup menu will appear. Choose CUTAWAY.

  • Getting one MC to react to the animations of another

    Hey guys, I'm not only new to the forums, but also rather new to AS 3.0, so this might be something really simple but I can't seem to figure it out.  Basically, what I'm trying to do it make a photogallery that's essentially a grid of thumbnails.  When the user rolls over a thumbnail, I want it to grow in size just a little bit and when they click it would get much larger.  Now, that part is simple, but when all of these size changes take place, I'm trying to make the other thumbnails get out of the way, instead of the usual overlapping that would occur.  So my question is this:
    Is there some simple way to change the properties of those thumbnail MCs to avoid overlapping at all costs, while remaining on the stage?  Or would I have to animate every possible combination separately on ever possible thumbnail?  The latter would be possible I guess, but it seems like AS 3.0 is pretty intuitive and having to code something like that seems pretty archaic.
    Thanks!

    you'll have to code for that.  you can use google to search for:  flash tsunami.
    you'll need expand the standard tsunami effect to a grid but all the coding is essentially the same.

  • Table - populate one table with data from the list of another table

    Hello All,
    I am a newbie in Swing and am a book and few tutorials old.
    I am trying to achieve the following:
    (1) I populate Table1 (a JTable) with a list of data - each row consists of several columns. And I have a Table2 (also JTable) that is in the beginning empty.
    Both the tables (Table1 and Table2) are showed in the window.
    (2) Lets say, there's a button (JButton) in between the two tables.
    Now if I Select a row from Table1 and press the button, this row will be sent/copied to Table2.
    And this way I can choose different rows and pass the data to Table2.
    I have manages to make Table1 and put data in it ... but for the rest, I don't know where and how to begin.
    Would appreciate some ideas and tips.
    Thank you.

    Since you are using a button to start the copy process you don't need to worry about a ListSelectionListener or a MouseListener. You need to create a button with an ActionListener that does the following:
    a) Create an Array based on the size of the number of columns in the table
    b) get the index of the selected row
    c) populate the Array with data from the TableModel by using the table.getModel().getValueAt(...) method for each
    d) Now you can add the row of data to the other JTable by updating its model.
    DefaultTableModel model2 = (DefaultTableModel)table2.getMode();
    model.addRow( theArray );

  • Programmatically fire graph cursor move event

    Is it possible to programmatically fire the Graph Cursor Move Event ?  Assigning a value to the Cursor Index or Cursor Position property node does not seem to do it.
    Solved!
    Go to Solution.

    The graph cursor move event contains processing code for data on the graph along with front panel display of those results.  Data is put onto the graph during data acquisition which occurs in another event.  When that data acquisition event finishes I need to cause the processing code to execute once to update the front panel display so its results are shown for the new acquired data.
    I could put the processing code into a different event that fires on say a button value change.  Then the graph cursor move event would fire that button event change by setting its value change property.  The data acquisition event could also fire that button event.

  • Move the name of cursor (not the cursor itself) on the XY graph

    I use cursor list property to overlay cursors on the XY graph, everything looks fine except that the name of the cursor and the cursor are at the same position, so it's hard to read the name of the cursor. Is there anyway to dynamically move the name of the cursor?

    No, you cannot do this programatically, the cursor name position may only be moved manually when the Name is "Trackable" (when Allow Drag == TRUE). However, you can use cursors in pairs of two to accomplish this. Use the first one as a normal cursor and the second one only for the cursor name, making the line (Hair Style) and point (Point Style) invisible (=0). If you have multiple cursors, just treat them as pairs and multiple your index by two, when finding the index of the pair.
    Good luck,
    Jim
    Attachments:
    Cursors.vi ‏39 KB

  • How to move the cursor dynamically

    Hi friends,
             I want to move the cursor  in the output list.  According to the cursor movment I want the output order.
             Normally cursor will move   -
    when first line completes  then only it will go to next line. after that same process but for  me  I want to move  the cursor position from 40 th line to 2nd line or anywhere. Please explain me.
    Regards,
    Surya

    Hi,
         Thank u,
         SET cursor is used to put the cursor on the selection screen. but what my requirement is I want to display the all contents of internal table into he colum wise.
    normally we will print like this   f1  f2  f3 ....one row shows one record.
    but for me output is.
                                   f1
                                   f2
                                   f3
                                      .  one colum will show one record.
    Regards,
    Surya

Maybe you are looking for