Automatic page updates causing problems with your screen reader? this kind of message come when i access yahoo mail.yahoo mail page not come properly.

Automatic page updates causing problems with your screen reader? this kind of message come when i access yahoo mail.yahoo mail page not come properly.i can't chat,compose mail nothing accessing.

Try Refresh Blocker: https://addons.mozilla.org/firefox/addon/992

Similar Messages

Automatic page updates causing problems with your screen reader

i want to know whats going on with this Automatic page updates causing problems with your screen reader and yahoo does not work and in order for me to even email you for this question i have to use internet exp I have found this complaint many times in the forum but with no real answer how to fix the dang thing will you please tell us what your doing about this problem and or do we have to go back to using internet exp there are more sights than yahoo that no longer work with mozilla please let us no what is bieng done about this problem if any thing
== URL of affected sites ==
http://
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.0; Trident/4.0; SearchToolbar 1.1; Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1) ; SLCC1; .NET CLR 2.0.50727; Media Center PC 5.0; .NET CLR 3.5.30729; .NET CLR 3.0.30729; eMusic DLM/4; OfficeLiveConnector.1.4; OfficeLivePatch.1.3; InfoPath.3; .NET4.0C; AskTB5.8)

Try Refresh Blocker: https://addons.mozilla.org/firefox/addon/992

I have an older version of Adobe Digital Editions (around 3 years old) and was very happy with it. Then I had problems with my Kobo Reader and asked a friend who works in IT to assist. She could not fix the Kobo but she messed up my Addobe. She downloade

I have an older version of Adobe Digital Editions (around 3 years old) and was very happy with it.
Then I had problems with my Kobo Reader and asked a friend who works in IT to assist. She could not fix the Kobo but she messed up my Addobe. She downloaded version three and I have an account and a password - was not able to transfer my books from my reader to version three (and I don't like the lay-out - I would prefer to stay with the old version as I also loose all my download date info..)
But all the books I have bought over the last three years are in the old Adobe Digital and I cannot access them any more. When I use it I get the message "that the document is licensed to a different account. I can't even open the books on my computer.
When I go to my Kobo library, I cannot also not open my books and get the message "this doc is protected by adobe digital rights management and is not currently authorized for use with your adobe. please sign in with your authorized adobe id and try again"
I believe the problem is that I do not seem to have a digital id for my old adobe or that the Kobo is not in sync with it anymore.
can you please help me - going on vacation in three days and cannot go without books.

Please authorize ADE 3 with same credentials that you used with older version of ADE

Pages update causes problems?

Since April's update I have had problems with Pages. Templates keep opening with the 'cannot find font' message even though the font is activated. Since I use Font Explorer to manage fonts I tried moving the fonts into the system folder/font folder. Pages still could not find them. After deleting Pages and Keynote and reinstalling them from my CD all is happy again.
My impression is that the update caused the problems. Anybody else experiencing this?
Kurt

Hullo Kurt:
Glad you got it sorted. Didn't think it would help you much without further insight - but I had no trouble with the update either. One of those things you had to persevere with on the system you know to fix.
I recall that when I first installed OsX, there was a font collection called "Classic." It was not of fonts the designers call "classic", so I assume it was carried over from Os9, even though I hadn't installed that.
You can collate whatever collections you want from Pages, as you know: just so long as they go into the User or System Library fonts. I don't know how it is with Font Explorer, but with Font Book I find the safest way of resolving duplicates so they don't keep reappearing is to "resolve duplicates" first for any black-dotted fonts, then scan for the greyed out versions where they appear. These can be safely "removed" via Font Book.
This way Pages can choose which copy of a font it doesn't need.
BTW I've just updated to OsX 10.4.7. Can't put it on my profile yet. But it reproduces type throughout the system, and especially in Pages, even more snappily than before, and is said to improve Font Book's handling - as well as some PDF problems.
Be interesting to see whether those are the ones that members have had trouble with. MacFixit suggests that this system update can cause problems with various duplicate files, but I started with a clean computer, left it alone for the update, and did a Safe Boot to see what that cleaned out before I bothered with all that, and then I found no need for it. Routine maintenance did turn up quite a few permissions to be repaired though.
OTOH, if the system details on your profile are right, you might do better to look for a combo update on Mac Downloads to be sure you get it all stitched.
Cheers.
Mac OsX 10.4.7, never mind what it says under here.

Devtools update causes problems with sudo when used in a script?

I'm a little confused by this one, but I'm not convinced that it's a bug.. yet.
Long story short, I compile packages using the ABS via a script/wrapper which uses devtools. The script is available here: https://github.com/WorMzy/compilepackage
Now, this script is far from perfect, but has worked perfectly well (in various states of completeness) for the past year or so. However, with the recent update of devtools (20120720-1 => 20121013-1), my script fails to execute correctly. After entering the password when prompted (by sudo, at this line: https://github.com/WorMzy/compilepackag … tions#L107), the script terminates unexpectedly.
Downgrading devtools "fixes" this problem, but I'm not sure if this is a bug in devtools, sudo, zsh, my script, or something else.
Here is the full output from the compilation of "arch-install-scripts":
build@sakura[pts/10]:~/builds/devtools$ . ~/.scripts/compilepackage arch-install-scripts
==> Downloading sources
==> arch-install-scripts directory already exist. Replace ? [Y/n]
==> Download arch-install-scripts sources
receiving file list ... done
sent 28 bytes received 70 bytes 39.20 bytes/sec
total size is 656 speedup is 6.69
:: Synchronizing package databases...
core is up to date
extra is up to date
community is up to date
:: Starting full system upgrade...
there is nothing to do
==> Building in chroot for [extra] (x86_64)...
==> Creating clean working copy...done
==> Making package: arch-install-scripts 8-1 (Fri Oct 19 23:45:52 BST 2012)
==> Checking runtime dependencies...
==> Checking buildtime dependencies...
==> Retrieving Sources...
-> Found arch-install-scripts-8.tar.gz
-> Found arch-install-scripts-8.tar.gz.sig
==> Validating source files with md5sums...
arch-install-scripts-8.tar.gz ... Passed
arch-install-scripts-8.tar.gz.sig ... Passed
==> Verifying source file signatures with gpg...
arch-install-scripts-8.tar.gz ... FAILED (unknown public key 1EB2638FF56C0C53)
==> WARNING: Warnings have occurred while verifying the signatures.
Please make sure you really trust them.
==> Extracting Sources...
-> Extracting arch-install-scripts-8.tar.gz with bsdtar
==> Starting build()...
make: Entering directory `/build/src/arch-install-scripts-8'
GEN arch-chroot
GEN genfstab
GEN pacstrap
make: Leaving directory `/build/src/arch-install-scripts-8'
==> Entering fakeroot environment...
==> Starting package()...
make: Entering directory `/build/src/arch-install-scripts-8'
install -dm755 /build/pkg/usr/bin
install -m755 arch-chroot genfstab pacstrap /build/pkg/usr/bin
install -Dm644 zsh-completion /build/pkg/usr/share/zsh/site-functions/_archinstallscripts
make: Leaving directory `/build/src/arch-install-scripts-8'
==> Tidying install...
-> Purging unwanted files...
-> Compressing man and info pages...
-> Stripping unneeded symbols from binaries and libraries...
==> Creating package...
-> Generating .PKGINFO file...
-> Compressing package...
==> Leaving fakeroot environment.
==> Finished making: arch-install-scripts 8-1 (Fri Oct 19 23:45:54 BST 2012)
==> Installing package arch-install-scripts with pacman -U...
loading packages...
resolving dependencies...
looking for inter-conflicts...
Targets (1): arch-install-scripts-8-1
Total Installed Size: 0.03 MiB
Proceed with installation? [Y/n]
(1/1) checking package integrity [######################################################################] 100%
(1/1) loading package files [######################################################################] 100%
(1/1) checking for file conflicts [######################################################################] 100%
(1/1) installing arch-install-scripts [######################################################################] 100%
resolving dependencies...
looking for inter-conflicts...
Targets (5): elfutils-0.155-1 pyalpm-0.5.3-2 python-3.3.0-1 python-pyelftools-0.20-2 namcap-3.2.4-2
Total Installed Size: 99.58 MiB
Proceed with installation? [Y/n]
(5/5) checking package integrity [######################################################################] 100%
(5/5) loading package files [######################################################################] 100%
(5/5) checking for file conflicts [######################################################################] 100%
(1/5) installing python [######################################################################] 100%
Optional dependencies for python
tk: for tkinter
sqlite
(2/5) installing pyalpm [######################################################################] 100%
(3/5) installing elfutils [######################################################################] 100%
(4/5) installing python-pyelftools [######################################################################] 100%
(5/5) installing namcap [######################################################################] 100%
Checking PKGBUILD
Checking arch-install-scripts-8-1-any.pkg.tar.xz
arch-install-scripts W: Dependency bash included but already satisfied
arch-install-scripts W: Dependency included and not needed ('coreutils')
arch-install-scripts W: Dependency included and not needed ('pacman')
arch-install-scripts W: Dependency included and not needed ('util-linux')
==> Compilation complete, installing...
Password:
loading packages...
warning: arch-install-scripts-8-1 is up to date -- reinstalling
resolving dependencies...
looking for inter-conflicts...
Targets (1): arch-install-scripts-8-1
Total Installed Size: 0.03 MiB
Net Upgrade Size: 0.00 MiB
Proceed with installation? [Y/n] % build@sakura[pts/10]:~/builds/arch-install-scripts$
That "%" is inverted, just like what you get when you run
echo -n "text"
in zsh. Incidentally, here is my .zshrc: https://github.com/WorMzy/Config-files/ … ter/.zshrc, however, the problem persists with a new user with an unconfigured zsh.
Here is my sudoers too:
## sudoers file.
## This file MUST be edited with the 'visudo' command as root.
## Failure to use 'visudo' may result in syntax or file permission errors
## that prevent sudo from running.
## See the sudoers man page for the details on how to write a sudoers file.
## Host alias specification
## Groups of machines. These may include host names (optionally with wildcards),
## IP addresses, network numbers or netgroups.
# Host_Alias WEBSERVERS = www1, www2, www3
## User alias specification
## Groups of users. These may consist of user names, uids, Unix groups,
## or netgroups.
# User_Alias ADMINS = millert, dowdy, mikef
## Cmnd alias specification
## Groups of commands. Often used to group related commands together.
# Cmnd_Alias PROCESSES = /usr/bin/nice, /bin/kill, /usr/bin/renice, \
# /usr/bin/pkill, /usr/bin/top
## Defaults specification
## You may wish to keep some of the following environment variables
## when running commands via sudo.
## Locale settings
# Defaults env_keep += "LANG LANGUAGE LINGUAS LC_* _XKB_CHARSET"
## Run X applications through sudo; HOME is used to find the
## .Xauthority file. Note that other programs use HOME to find
## configuration files and this may lead to privilege escalation!
# Defaults env_keep += "HOME"
## X11 resource path settings
# Defaults env_keep += "XAPPLRESDIR XFILESEARCHPATH XUSERFILESEARCHPATH"
## Desktop path settings
# Defaults env_keep += "QTDIR KDEDIR"
## Allow sudo-run commands to inherit the callers' ConsoleKit session
# Defaults env_keep += "XDG_SESSION_COOKIE"
## Uncomment to enable special input methods. Care should be taken as
## this may allow users to subvert the command being run via sudo.
# Defaults env_keep += "XMODIFIERS GTK_IM_MODULE QT_IM_MODULE QT_IM_SWITCHER"
## Uncomment to enable logging of a command's output, except for
## sudoreplay and reboot. Use sudoreplay to play back logged sessions.
# Defaults log_output
# Defaults!/usr/bin/sudoreplay !log_output
# Defaults!/usr/local/bin/sudoreplay !log_output
# Defaults!/sbin/reboot !log_output
Defaults timestamp_timeout=0,passwd_timeout=0,passprompt="Password:",badpass_message="Incorrect password",editor=/usr/bin/vim:/usr/bin/vi,targetpw
## Runas alias specification
## User privilege specification
root ALL=(ALL) ALL
build sakura=/usr/bin/pacman-color -U *,/usr/bin/pacman-color -Sy,/usr/bin/pacman-color -Syy
build sakura=/usr/bin/pacman -U *
build sakura=NOPASSWD: /usr/bin/extra-x86_64-build,/usr/bin/multilib-build,/usr/sbin/makechrootpkg
## Uncomment to allow members of group wheel to execute any command
%wheel sakura=(ALL) ALL
## Same thing without a password
#%wheel ALL=(ALL) NOPASSWD: /sbin/sdshutdown, /sbin/sdreboot
## Uncomment to allow members of group sudo to execute any command
# %sudo ALL=(ALL) ALL
## Uncomment to allow any user to run sudo if they know the password
## of the user they are running the command as (root by default).
# Defaults targetpw # Ask for the password of the target user
# ALL ALL=(ALL) ALL # WARNING: only use this together with 'Defaults targetpw'
## Read drop-in files from /etc/sudoers.d
## (the '#' here does not indicate a comment)
#includedir /etc/sudoers.d
Further information will be provided on request. Suggestions for improving the script will also be appreciated.
Thanks.

Update: It appears that the cause is systemd's nspawn. Disabling it in mkarchroot (have_nspawn=0) resolves the problem.
However, I don't understand why it's causing this behaviour. User input works fine for the sudo password prompt, but then fails for the pacman user prompt? Do they use different input buffers or something? Does that question even make sense?
Anyway, I'll open a bug report on flyspray and upstream about this when I get the chance.

Verizon is the 4.3 update causing problems with my phone because my phone is having problems

I have been having multiple problems with my GS3 since the 4.3 update including wifi connection issues dropped and frozen calls frequent unmounting of my sd card bluetooth problems to site the worst. I have updated and reset my router checked and reset my phone settings multiple times taken my baterry out of my phone 2 a day on average turned my phone off multiple times a day to reset it. I am now wondering what will fix all these problems because nothing i have read from your forums has done anything, how much longer do i have to pay full monthly prices for services i can no longer full monthly access?

Your phone is a mini computer, no matter what os it runs.
Software updates from various developers , patch and patch again. Adding to the original App software already on your device. Not only do updates apps take up more room on your device with each update, but imperfect updates and the communication with other services on your phone lead to many software "glitches".   When there are major software errors, the best remedy is to clean it out and start it fresh.
It is recommended for Apple devices suffering from battery life problems, app crashes, lack of device storage and other issues after the iOS 7 update.
Android devices are no different.
It is drastic, but sometimes unavoidable.   Don't forget to back up any information that is unique to the device.

Leopard 10.5.5 update causes problem with PDF creation

Mac Pro 2X Quad-Core Intel Xeon 3 GHz, updated to 10.5.5. using the combo updater.
PDFs created from Illustrator CS3 (13.0.2) using print to Adobe PDF 8.0. Page size is correct, but the image is only half the size. When I boot to a backup system 10.5.4 disk, the same file is created correctly. Good thing I made a backup before updating! Anyone else have this problem?

Hi everyone,
We at Adobe are working to understand the change and work with Apple to find a solution. In the meantime, I've published a KB article here: http://www.adobe.com/go/kb406381
I've tested to 15+ printers so far, and the only ones that showed a problem are the Adobe PDF Printer and an HP 1320, and only when printing from InDesign CS3 or Illustrator CS3.
I would help if you can post more details if
* You have a 10.5.5 printing problem from something other than AI/ID CS3
* You have had success/failures with workarounds in the KB doc
* You have had the problem to a physical printer (include details of the printer)
Thank you!

Firmware update caused problems with HBD-N790W

Latest firmware update caused my DVD Blu Ray Home Theater to lose the ability to find internet video content. The unit shows that the 12/19 update was successful. I can access the internet and get web browser content--so there isn't anything wrong with my wireless web connection. My unit shows the connection to the internet is working. I made a YouTube video about it:https://www.youtube.com/watch?v=9nqYNNVPcBA&list=UUNQaJbjyKQwFlZXY6832mIA The set-up feature does not work and I lost my video channels (Netflix, Amazon). I don't really understand why my connection to the internet works, my wireless works...everything works except getting updated media channels. I have tried plugging and unplugging cable, modem, wireless, unit, for ten minutes many times. I reconnect the unit to the web...get buttons that say that internet content can be updated...press the button...then the Sony logo and it stops there.

Hi, i work for a Service center for walmart and bestbuy and i have been getting this model in for service for awile now, after a firmware update the systems have reported to work good till there turned off the first time and then they dont book up all the way, you will get a Sony logo at top left screen and the Blue Bluray Logo in the center of the tv screen and thats it, no menu functions the controls on the player it self flash on and off slowly you can turn the system on and off with the remote but thats it, this looks like a failed firmware update but there seems to be no way to reflash these even with the firmware you can get from the sony site you have to burn a CDR disk but becuse there is no menu you cant get that far, i have 19 of these units stacked up 5 have been replaced with other brands to make customers happy, the rest on still in wait for a fix, its looking like replacement of main board will be the next step in this night mare. if sony tech wants to shine some lite on this now i would be very gratefull. Thanks Chris R.

Java update causes problems with color printing in Mac 10.5

Had a big problem with color printing for the last two weeks. Thought the printer was broken because it would freeze and refuse to be "seen", or would generate error messages. Bought new Samsung 315, and had the SAME problem. Bought new HP CP1518ni, and had the SAME problem. Not resolved after talking to tech support at both places.
Looked for software updates around the time of the onset of printing problems. on May 15 installed "Java for Mac OS X 10.5 update" (1.0) (am running on 10.5.8). Removed the Java preferences files (com.apple.java......plist) and restarted.
Problem solved! Clearly not the printer.

Hmmm. This is about the time my printer stopped printing too. I've now had two printers in my house and had trouble with both of them. What a pain we should not have to delete updates for our stuff to work together.
Renee

IOS 8.0.2 update causing problems with wifi connectivity..please help

latest update having problems ...please help..!!!!!!!!!!

Just a quick snapshot of my chain of events. I’m currently on my fourth iPhone 6 Plus 64GB here in London, UK. Every time I have spoken to AppleCare and told them that I have gone through all the Wi-Fi troubleshooting methods possible they have asked me to get a brand new retail replacement as I’m within my 14 day return period. I’ve been experiencing the following issues:
Wi-Fi disconnects and switches to 4G (Restart required for temp fix)
Wi-Fi is still active but there is no traffic or activity– often when in sleep mode for long periods of time. (Toggle Wi-Fi on/off for temp fix)
Wi-Fi disconnects and cannot find any networks (restart required for temp fix)
This has been occurring on both iOS 8 and 8.0.2
The issues are the same on both my 2.4Ghz and 5Ghz networks
This is affecting my ip6+ and 5s (5s used to work perfect on ios7 on same networks) – My MBP-R and all other devices run perfectly on my network.
I spoke to AppleCare again yesterday and asked for their advice as its now my fourth iPhone in just under a month. This time they said that apple were fully aware of the Wi-Fi problem and that new repair tickets were not being raised for their engineers as they are already working hard to get this resolved. They also said they could see all the issues raised on the apple discussions boards which they usually don’t admit too! I asked what to do next and the advisor apologised and said this is clearly a software glitch and will be resolved in the next update. I asked for a timescale but unfortunately none was given.
As stated above I have tried all the troubleshooting methods discussed on forums and on tech websites but the only thing that gives me a stable connection without any disconnects (especially on my 6 plus) is turning cellular/mobile data off when I know I’m going to be on Wi-Fi for a sustained period of time (e.g. at home or work). I appreciate this is annoying but it’s the best temp fix until an update comes out.
Hope it helps everyone who is having issues with their devices that have cellular functionality.
Any comments welcome

If you are having issues connecting to wifi with your Ipad, READ THIS

My son recently could not connect to the home wifi. After almost a year of having no issues, it came on overnight sort-of-speaking. I spent over three hours doing all the resets and tried anything that was talked about online. This could be your issue too. WHEN YOU SET UP YOUR ROUTER, IT WILL HAVE A PASSCODE/PASSWORD/PASSPHRASE (different routers may call it differently), this is usually a series of letters and numbers. YOU WILL ALSO SET UP A PASSWORD TO ACCESS YOUR HOME NETWORK FROM ANY OF YOUR DEVICES. THE TWO ARE VERY DIFFERENT, THE PASSWORD THAT THE IPAD WANTS IS NOT THE NETWORK PASSWORD, IT IS THE PASSWORD OF THE ROUTER.
This makes no sense to me, but it worded. I have a CISCO router and Mercury Net for an Internet provider. As I was working on getting my issue solved, I ran across a post that said this same thing about a different router and provider, so I thought why not try it, nothing to lose. IF IT WORKED FOR TWO DIFFERENT ROUTERS AND PROVIDERS, THIS COULD BE YOUR PROBLEM AS WELL.
To start with, I did not know the passphrase to my roouter. I reset the router to factory default and followed a few steps for security and other things. Along the reset, there was a page that showed the passphrase. If you do not have your router passphrase, this may be your best bet. I am by no means a professional when it comes to computers, but I am not affraid to try a few things when needed. This was not too hard and it will not be for you either.
Good Luck
If you need more information, let me know, I will try to help.
Thanks for reading

I'm glad you had luck with this. I have the same issue, and i've replaced the droid turbo 4 times. I've tried it on 4 or 5 different wifi networks and it doesn't give me any type of speed at all.

Solve Problem with USB Connection / Read this it i...

i can not load maps on my n97 mini. the error 'usb connection lost...' show on the screen in map loader but at the first day i had no problems.
i wonder why. i look for driver, ovi suite, pc suite, usb at the pc, read in the forum and many more. but nothing solve the problem. after 2 days i use accidentally the original cable which comes with the nokia n97 mini (it is a ca-101) and all my problems are gone ! bevor i use an 'old' ca-101 cabel from my n82 and i can not upload a map but the handy is shown in the pc system with all drivers and no problems. only loading big megabytes data on the handy crashes the usb connection. with the n97 mini ca-101 cabel no problem with gigabytes. i look for another ca-101 cable from the 6220 from my wife and i have the same problems (i never used bevor this cable for a connection to any handy ! it was brand new !). it seems that 'old' ca-101 cabels do not handle big data with the n97 mini. i look on the gold spring clips in the micro usb and could see that the are a little smaller and not so high in the jack in the 'old' cables. all three cables are original from nokia and not from china ! if you are also problems look on the produkt id on the plastics. if the letters are gold you have a cable like my n97 mini cable, but if the letters are black on a silver button you have an 'old' cable.
i hope i can help another with this maniac problem
greetings

I can verify this on win7 with latest PC suite.
I was using the cable that came with my 6500s as I didn't want to tackle the rats nest of wiring behind my pc.
This cable is a ca101 with silver writing on the plastic tab, made in China.
Using this cable, my 6620c would not complete a backup, it would just sit for hours on 2-4%.
Tested with the ca101 cable that came with the 6620c (gold writing, made in Thailand).
This time the backup completed in about 2 minutes.
Thank you so much for finding this, it has been driving me crazy!

I have problem with my Firefox 3.6.18. It crashes when I sending email via Yahoo when Tor is enabled. Why is that?

This is what I get when crash reporter shows up after crashing my browser: Add-ons: {e0204bd5-9d31-402b-a99d-a6aa8ffebdca}:1.3.3-alpha,{972ce4c6-7e08-4474-a285-3208198ce6fd}:3.6.18
BuildID: 20110614230723
CrashTime: 1309515332
EMCheckCompatibility: true
FramePoisonBase: 00000000f0de0000
FramePoisonSize: 65536
InstallTime: 1308766242
ProductName: Firefox
ReleaseChannel: release
SecondsSinceLastCrash: 592
StartupTime: 1309515143
Theme: classic/1.0
Throttleable: 1
URL: http://us.mg4.mail.yahoo.com/dc/launch?ymv=2&sysreq=ignore&tos=0&ncrumb=QyzpsMGBt6P
Vendor: Mozilla
Version: 3.6.18
This report also contains technical information about the state of the application when it crashed.
And I can't submit report. It shows an error.
This is my crash report...
https://crash-stats.mozilla.com/report/index/bp-69afdf09-890b-4857-bf03-72fb42110701
I always get empty signature. I have no idea why but I checked every report I had and it's always empty.
Maybe this will help to understand my situation:
https://bugzilla.mozilla.org/show_bug.cgi?id=666924
I have Tor button... 1.3.3. alpha. Everything worked great since this morning. It happen to me few times this month. I deleted Yahoo State Plugin. Still doesn't work.
Yesterday I deleted Microsoft .NET Framework Assistant ...I heard it could possibly crash Firefox. But I think it wasn't about it... cause my browser still crashes. Also I have Java Console 6.0.26. and Java Quick Starter 1.0 but these plugins are always disabled when Tor in use.
Thanks for you help.

I believe I've solved this issue by carrying out the following action:-
First cancel all “send and receive” operations in OutLook. Next remove all emails from your "Outbox" (by either deleting them or moving them to the “Draft” folder). Next shutdown OutLook and then click on the “Start” button on the lower left-hand side of the Window’s taskbar, then click on “Run” now type in “regsvr32.exe inetcomm.dll” without the quotation marks, so it looks like this:
regsvr32.exe inetcomm.dll
Note the space between .exe and inetcomm.dll and hit “Enter” on the keyboard.
The computer will execute the command. If all goes well in a few moments a dialog box will appear and state “dll registered successful
I have not had it hand since ... cross fingers ;)

Automatic Contribute 4 Update Causes Problems with Office

I have several users that have been using Contribute
successfully for a couple years now and were on version 3.0. They
received a popup that requested that they update to Version 4.
They did and then everytime they tried to open Word, Excel or
another office product it would conflict with Contribute.
Is there a known fix for this? if not how can I prevent the
users from receiving the upgrade popup?

Hi,
Can you try the following work arounds and provide me
feedback:
1. Close all MS Office apps. Go to control panel, Choose
contribute
and click on Change button. Try to Repair the
contribute installation
and verify if the same thing happens again.
2. Another alternative could be to Uninstall and re-install
Contribute
3. Also as we are trying to reproduce the problem in the test
machines, it would be great if you can list us the applications
that you are running on your machine and mail me at
[email protected]
Thanks
Manoj

Latest update causing problems with my itunes update on my computer,

Have had to delete itunes on my computer to try to get this update to upload. I cannot even access an earlier version. I have tried everything from uninstalling to cleaning my hard drive and still it will not install.

ITunes update 11.1.4 would not install and I received the following error message.
"The program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem".
A temporary solution was to restore my system to a date before the 11.1.4 update was applied.
This worked and I was again able to use iTunes except that synchronisation between iTunes, my iphone and ipad was frustrated. I received an message to the effect that “you need to turn on synchronisation in isync preferences before you can sync contacts and calendars.”
Further research on these boards revealed that this problem too was apparently caused by the Apple update could only be resolved by installing the latest version of iTunes i.e. 11.1.4
Thus a clean install of iTunes 11.1.4 was obviously necessary for complete functionality.
Thus I followed the procedures detailed by Turingtest2 here
https://discussions.apple.com/docs/DOC-6562
I carefully deleted all of the Apple related programs and folders I could find as suggested.
I had problems deleting Apple Mobile Device Support. I eventually managed it though by variously
using CONT-ALT-DEL to enter Task Manager and then Processes and then halted(ended) any Apple process I was able to find. It eventually deleted but not without a struggle!
I then performed a clean installation as described ensuring I right clicked on the download and selected Run as Administrator.
Itunes 11.1.4 was then installed with no loss of previously downloaded material – books music etc.
Not impressed with this Apple update at all…… a seemingly very cavalier approach to customer care.

Automatic page updates causing problems with your screen reader? this kind of message come when i access yahoo mail.yahoo mail page not come properly.

Similar Messages

Maybe you are looking for