Automatic Refresh of LOV

Hi,
When I click on LOV button for a new transaction, the LOV is filtered by the value that was used in the previous transaction.
Is there a way to automatically refresh the LOV so that all values appear?
I am using jdeveloper 10.1.3
Thanks

Hi,
there are two aspects in your question that I cannot make sense of
1. what has the "transaction" to do with it
2. There is no LOV in ADF Faces of 10.1.3, so which technology are you talking about ?
Frank

Similar Messages

LOV Automatic Refresh

Hello,
I'm using an automatic refresh list of values, which works fine in WebI,
in editing mode (java). My clients use the HTML/PDF view of the report, and
have to refresh the LOV manually.
Has anyone an idea of how to make the LOV behave the same in Java and HTML
Thank you
Martin

Greetings,
What happen if you set the document to refresh on open?
Did you by any chance tick the box at universe to export LOV with universe? If yes you may need to untick this box and set the Automatic Refresh for the LOV.
You may need to purge the LOV before experting the universe after unsetting the export with universe button.

Automatically refreshing LOV with user restriction failes

Hi,
I have a report based on Crystal Reports. This reports includes a dynamic parameter (LOV) based on one field in an SAP Query. This SAP query contains an user exit, so that each user can only see "his" data.
Based on that user exit, the LOV of the parameter shows only these values for which the user is qualified for.
When User1 opens the report in InfoView on his own PC he gets "his" LOV, chooses the parameters and runs the report, when User2 on his PC also opens the report a short while after User1 runs his report, then User2 gets the LOV from User1. That means Crystal uses the LOV from the cache and does not refresh the LOV for each execution of the report.
Does anybody has a solution for that?
THis is a very annoying problem.
(I've already done a search on this forum and found someone with exactly the same problem...the post is marked as answered but without explanations...)

hi antinous,
this would most likely have something to do with the way the enterprise crystal reports servers are caching the reports and doesn't really relate to the design of the report.
you can double check this by running the report in the crystal reports designer, and then rerun the exact same report also in the crystal reports designer using different user credentials...this is of course just to double check that the LOV is indeed bringing back the appropriate data for each user.
if the LOV's work fine in the designer and if you haven't found the answer you are looking for then you may wish to repost this to
SAP BusinessObjects Enterprise/Edge, and SAP Crystal Reports Server Administration
BI Platform
you'll have more luck there as this would be the forum that looks after those servers.
jamie

Automatically refreshing LOV failes

Hi,
I have a report based on Crystal Reports. This reports includes a dynamic parameter (LOV) based on one field in an SAP Query. This SAP query contains an user exit, so that each user can only see "his" data.
Based on that user exit, the LOV of the parameter shows only these values for which the user is qualified for.
When User1 opens the report in InfoView on his own PC he gets "his" LOV, chooses the parameters and runs the report, when User2 on his PC also opens the report a short while after User1 runs his report, then User2 gets the LOV from User1. That means Crystal uses the LOV from the cache and does not refresh the LOV for each execution of the report.
This is absolutly NOT correct. Does anybody has a solution for that?
I know that Crystal has problems with dynamic LOV when using Universes, but don't use an Universe in this report.
Please help!
Thank you,
Stefanie

This is a WAG at best, but a thought none the less...
Might there be an entry in the system registry or .ini file that is used to tell Crystal how old a cached LOV can get before it is refreshed? Perhaps that could be changed to "zero"... (Modify the registry at your own risk! :-> )
HTH,
Carl

Text items not being refreshed by LOV items.

Hi all,
I've got a strange LOV behavior problems which I cannot solve and require your valuable time and efforts.
I've created a simple ADF JSF pages with 3 fields and the first field is LOV enabled. For all new row, after clicking the LOV icon, the LOV will show up and after selecting a particular value, it closes the LOV screen and replace it with a new row with the selected LOV data. It is all working well for all new rows just like a normal LOV should perform.
But I had problem with existing data. The row which I selected from the LOV somehow cannot referesh and overwrite any existing row (visually) but after commiting the data, it was actually written and refreshed with the correct data. Is there a property in the JHeadstart Application Definition Editor where I enforce the text items to be refreshed by the LOV items?
Thank you for your time and efforts.
Kind Regards,
John

Hi Guys,
I've performed the following scenarios attempting to refreshed Text items by the LOV Items.
Scenario 1: Create a new column called some_key load unique number into it. Set this column as the primay key and deselect existing primary keys as key attributes. Also, I've created a sequence and some_key is of type of DBSequence getting value from the new sequence starting from 1.
After generation when run and the result is:
JBO-27022: Failed to load value at index 11 with java object of type oracle.jbo.domain.DBSequence due to java.sql.SQLException.
## Detail 0 ##java.sql.SQLException: Invalid column index
Scenario 2: Create a unique index for the some_key column, rerun and the result is:
JBO-27022: Failed to load value at index 11 with java object of type oracle.jbo.domain.DBSequence due to java.sql.SQLException.
## Detail 0 ##java.sql.SQLException: Invalid column index
Scenario 3: Set some_key as number instead of DBSequence (from Entity Object Editor), rerun and the result is:
JBO-27021: Failed to load CustomDatum value at index 11 with java object of type oracle.jbo.domain.Number due to java.sql.SQLException.
## Detail 0 ##java.sql.SQLException: Invalid column index
Scenario 4: Deattach the offending View Object from the Application Module. Remove the offending view link and view object. Recreate view object and view link. Reset some_key is of type of DBSequence getting value from the new sequence starting from 1 (From the Entity Object Editor). After generation when run and result is:
SUCCESSFULLY!!
So, I guess the bottom line is here are the following things which you need to perform in order to enable text item to be refreshed by LOV item (if the detail table has composite primary keys)
1.) Create a new column
2.) Load unique value to it
3.) Create unique index for it
4.) Create entity object, view object and view link object.
5.) Set the new column as primary key.
6.) Deselect the key attributes for all composite primary key columns.
Regards,
John

Is there a way to automatically refresh a webpage in Firefox 3.6.10?

hi there,
I am hoping the Firefox team can help with a small problem, is there a way of automatically refreshing webpages within Firefox 3.6.10 and 4.06 beta? We are building an interesting website at the moment and the client is using Firefox 3.6.10to view the site. Each time they go onto the new website to see the changes we have done, they are shown old pages. We need to rectify this problem as quickly as possible, for our client without requesting that they refresh the page each time they go onto the site.

You can do that by changing a hidden preference.
# Type '''about:config''' into the location bar and press enter
# Accept the warning message that appears, you will be taken to a list of preferences
# In the filter box type '''browser.cache''' to bring up a small number of preferences
# Double-click on the preference '''browser.cache.check_doc_frequency''' and change its value to '''1'''
For more details on that preference see http://kb.mozillazine.org/Browser.cache.check_doc_frequency

When I sign into or out of Gmail - many other pages automatically refresh. How do I stop this?

I hate automated things, when it's NON consensual and it's part of some automated bullshit trip.
I might have half finished texts on the other open tabs, or what ever, but it's MY bandwidth to chew up on things I see fit, not the people of Mozilla, or Google or whoever.
And while the account page is gmail, that I am signing into or out of, the other pages are NOT google pages either.
I think the designers of the "refresh / automatic refresh" should be shot - because the reason I have a PAGE (tab) open, is because I want to access THAT page, and not a later version of it...
This auto-reload / refresh of some tabs absolutely annoys the piss out of me, because I did not ask for it, and there is NO apparently easy up front way to stop it from happening - which I also think is one of the best way to alienate users of a product - by building in a host of idiot functions with NO control over them.
So how do i stop this from happening?

''the-edmeister [[#answer-690349|said]]''
<blockquote>
That may be happening for websites that participate in Google+. ''IOW, Google+ knows about a lot of things you use on the internet; like they're following you around.'' You may want to check those websites to verify that they are connected with the Google+ program, or not. ''In that case, my hypothesis is incorrect.''
I think what happens is that you sign in at Gmail, which is a Google+ sign-in these days, and all the other web pages that participate in the Google+ program somehow "sense" that you have just logged into Google+ and reload their page to reflect that you are nowlogged into the Google+ program. Google+ was originally an "option" at Gmail, but that ended not to long after Google+ came about - like within 6 months or so.
http://www.google.com/intl/en/+/learnmore/better/
One solution is to stay logged into Google+ / Gmail all the time. Another is to transition away from Gmail over time and use a different web-mail platform instead; and eventually stop using Gmail altogether.
</blockquote>
Yeah this is sounding like "THE PROBLEM" and what drives it. However, the solutions you have offered are not "solutions", in that they do not "FIX" the issues, they merely circumvent or bypass them.
Since I can't go punch Eric Schmitt on the nose for being a nazi prick, and send him the bill for wasting my internet data, I want to stop the collusive programming practices of the people from Mozilla and Google - from operating my computer, contrary to my mandates. i.e. It's my computer and I am paying for my bandwidth." - I have total say so about what I allow to go on, not anyone else.

I want to prevent open websites from automatically refreshing.

I work with many tabs open at the same time during my work day. I wonder if the fact that they automatically refresh frequently is a factor in slowing Firefox. How can I disable the automatic refresh? I do not with to close and reopen as they all require logins and it takes too much time.

Sorry, it looks that my reply above ended up in the wrong thread.
I'm not aware of a way to prevent automatic refresh if the page uses JavaScript to achieve this.
It is also possible to do this via a meta refresh tag.
In some cases this extension can help.
*RefreshBlocker: https://addons.mozilla.org/en-US/firefox/addon/refreshblocker/
It doesn't work with refresh done via JavaScript as will be used in most cases these days.

Automatic refresh of photo order when changing photo titles in iPhoto 9.6

I've just moved from an older version of iPhoto to 9.6.
In the previous version, when you changed the title of a photo (within an event), the sort order of the photos was automatically and immediately updated. In 9.6 it isn't - I have to do View - Sort Photos then select another sort criteria (e.g. date), then do this again for title, to get the photo order to refresh.
Does anyone know if I am I stuck with this new (retrograde) behaviour, or if there's a way to get iPhoto 9.6 to automatically refresh the photo order?
Otherwise, is there a keyboard shortcut for refreshing the photo order, or for changing the view - sort photos criteria?
Thanks in advance for any help!

It will resort if you leave the Event (click All Events button) and then go back. Not a good solution but quicker IMO than using the View ➙ Sort menu method.
Be sure to send a bug report to Apple via http://www.apple.com/feedback/iphoto.html.

UWL: No automatic refresh after completing workitem in iView

Hi,
our system is EP 6 SP2 P4 HF 7 with CM HF 6.
We have configured a workitem launched by an individual iview - this works fine.
For execution of this workitem we call SAP_WAPI_CREATE_EVENT and save values in simple_container. After this SWW_WI_ADMIN_COMPLETE is called to complete the workitem to be cleared from UWL inbox.
If I refresh the tab manual all works fine - the completed workitem is not more there. But with automatic refresh this executed workitem is still listed.
Do you have any idea what we are doing wrong?
Configuration in uwl.standard:
<Views>
<View name="myWorkItemView" selectionMode="SINGLESELECT" width="98%" supportedItemTypes="uwl.task.webflow.DE9_TS99500153" columnOrder="detailIcon, subject, priority, creatorId, createdDate, dueDate" sortby="createDate:descend, priority:descend" tableDesign="STANDARD" visibleRowCount="20" headerVisible="yes" tableNavigationFooterVisible="yes" tableNavigationType="CUSTOMNAV" actionRef="" refresh="60" dueDateSevere="86400000" dueDateWarning="259200000" emphasizedItems="new" displayOnlyDefinedAttributes="yes" actionPosition="top">
I appreciate your help,
thanks in advance,
Thorsten Bingmann

Hi Ross,
concerning our problem (no WI completion by auto refreshing UWL) we have yet no solution. SAP Support told us to configure the cache lifetime of UWL to smaller size, but alas this does not solve the problem.
As you mentioned the blank webgui screen: I think this behaviour is by design. Calling an ITS transaction there's no other way to end the ITS session as of using the back or return button and get an end of session. The given status (WI new status: completed) indicates that UWL and ITS process the WI correct.
A smarter way to execute the concerning WI ID is to configure it in the xml file as generic decision task. Then you'll get an inline rendered java iview with decision "accept" or "decline" and the new status will be shown in UWL. This will take place of (standard) ITS configuration. Please have a look at the HowTo Guide of UWL.
Hope it helps,
regards,
Thorsten Bingmann

My aol inbox does not automatically refresh and display new messages in firefox, but it does in google chrome. How do I fix this?

I have been trying to update settings to allow my aol mail to automatically refresh when new messages come in, vs having to click on the "inbox" in order to view new messages. I followed aol's troubleshooting steps to allow for this, and I finally got it to work in google chrome... but it will not automatically refresh in firefox. can you please help? thanks!

Which troubleshooting steps did you get?

Automatically refreshed workspace and changes into LIVE

Hi,
I've noticed that changes made directly into LIVE
are immediately visible to automatically refreshed
child workspaces. However the answer to the FAQ
question "When sharing changes made in a child
workspace with another child workspace, should I
use periodic (manual) or continually (automatic)
refresh?", states that this type of change must
be refreshed manually.
What is the expected behaviour afterall?
Regards,
Karina Borges

Karina,
For continually refreshed workspaces, changes made in the LIVE workspace will be immediately visible.
For non-continually refreshed (NCR) workspaces, the changes are not immediately visible - to see the changes, NCR workspaces have to be manually refreshed.
We will update the FAQ to make this point clearer.
regards,
- Ramesh.

Automatic refresh in the inbox.

Hi There,
We have implemented a new workflow project. Work items are not being refreshed automatically when the user comes back to the inbox.
Is there any way we can automatically refresh the inbox.
Joe Vellaiparambil

Hi Joe,
normally the inbox is refreshed automatically when you enter.
We found the program that is called when you enter the inbox.
Here you can add additional code.
Function module: SINWP
subroutine: append_folrg_to_tree
Best regards,
Werner.

Outlook 2007: unable to automatically refresh calendar

Hello,
With Outlook 2007 and OCFO 10.1.3.10 we can't get outlook to automatically refresh the calendar view so that events inserted in another client (i.e. same user on the web client or on the native ocal client, or another user) are seen.
Tools->Refresh Selected Folder(s) causes the events to turn up (eventually).
I've set the server refresh interval to 3 minutes, but despite several mail refreshes, I'm not getting any calendar refreshes.
Has anyone any ideas on how to get this working?
Tom.

Hello
there is also a setting on the server side (several actually)
Have a look at these pages
- in user.ini
http://68.142.116.68/docs/cd/B25553_01/calendar.1012/b25486/user_res_params.htm#sthref22
- in unison.ini
Metalink note 461204.1
Hope it helps

Materialized View - creation and schedule (To automate Refresh)

Hi All,
I have one table based on SQL Query (multiple tables) and loading data every day through procedure.
When I execute the procedure is taking lot of time to load data. That’s why I am planning to create Materialized view to refresh the data in a table every day at some point of time (ex:-9.00 am).
Exclude procedure and materialized view are there any ways to refresh the data?
Can you and all please help me to create materialized view and schedule (Automate refresh).
begin
insert into CLAIMS_PRODUCT_TAB
select
substr(at.ATN_VOUCHER_NUMBER,1,6) as BRANCH,
t.MONTH_NAME as MONTH,t.FISCAL_YEAR as YEAR,
bb.ACC_ACCOUNT_TYPE as TYPE,
aa.ACC_DEPARTMENT_CODE as DEPT,
pr.PRODUCT_NAME as PRODUCT,
case bb.ACC_ACCOUNT_TYPE when '1301' then 'Claims Paid' when '5383' then 'Claims OS' end as HEAD,
case aa.ACC_DEPARTMENT_CODE when '31' then 'OD' when '32' then 'TP' when '39' then 'TP Pool' end as DEPT_NAME,
count(distinct at.CLAIM_ID) as CLAIMS,
--count( distinct at.POLICY_ID) as POLICIES,
sum(atd.ATD_CREDIT_AMOUNT - atd.ATD_DEBIT_AMOUNT) as totals
from
ACCOUNTING_TRN_DETAIL atd,time t,
ACCOUNT bb,
ACCOUNT aa,claim c, policy p,product pr,
accounting_transaction at
where bb.ACC_ACCOUNT_ID = aa.ACC_ACC_ACCOUNT_ID
and at.CLAIM_ID = c.CLAIM_ID
and c.POLICY_ID = p.POLICY_ID
and p.PRODUCT_ID = pr.PRODUCT_ID
and aa.ACC_ACCOUNT_ID = atd.ACC_ACCOUNT_ID
and atd.ATN_ACCOUNTING_TRANSACTION_ID = at.ATN_ACCOUNTING_TRANSACTION_ID
and trunc(at.ATN_TRANSACTION_DATE) = t.CAL_DATE
and (bb.ACC_ACCOUNT_TYPE in ('1301','5383'))
group by substr(at.ATN_VOUCHER_NUMBER,1,6)
,t.MONTH_NAME
,t.FISCAL_YEAR,bb.ACC_ACCOUNT_TYPE
,aa.ACC_DEPARTMENT_CODE
,pr.PRODUCT_NAME
, case bb.ACC_ACCOUNT_TYPE when '1301' then 'Claims Paid' when '5383' then 'Claims OS' end
,case aa.ACC_DEPARTMENT_CODE when '31' then 'OD' when '32' then 'TP' when '39' then 'TP Pool' end );
end;
Thanks and Regards
Venkat

Is the MV and the source tables on the same database? If this is a remote MV, then check the source site if there are any issues (TEMP, UNDO space issues).

Automatic Refresh of LOV

Similar Messages

Maybe you are looking for