Automatic removal of colour fringing of Panasonic lenses on Olympus body (micro 43) possible?

Hi,
Last week I sold my Panasonic GH2 and bought an Olympus OM-D E-M5. My 14-45 Panasonic lens shows some nasty purple colour fringing with the OM-D (not your ordinary green-purple chromatic aberration, but purple fringing on both sides of highly exposed items, such as steel wheel covers). This I never(!!) saw with the GH2. Fortunately I can correct this in Lightroom. I go (in Develope module) to lenscorrections - colour - remove edge (purple). This works really well, and I know I can synchronise all affected images. But I would like to have this done automatically, just as Lightroom automatically removes all colour faults when using micro four-thirds Panasonic lenses with a micro four-thirds Panasonic body. This is done through special data supplied by Panasonic which are read and implemented by Lightroom (I believe).
Unfortunately this doesn't work when using a Panasonic lens on an Olympus body, which is my reason for this question. I can make my own profile using Adobe Profile Creator to automatically remove chromatic abberations. Reading the tutorial I get the impressions these profiles only remove normal chrom. aberration, not the special purple colour fringing I am talking about. So: is there any way to automate this fringing, or do I have to work on all affected images in Lightroom using the technique I described?
Thanks a lot for your help!
Willem

Before you do all the work creating a profile, why not create a develop preset?
Then you can apply this preset on import to all images taken with this lens and camera.

Similar Messages

A very precise way to remove a colour cast

I've just stumbled into a way to remove a colour cast with great precision and subtlety. It accomplishes the same thing as the Colour Variations, but with much greater control. Don't know if it's common knowlege or has been mentioned before, but here it is:
Copy your image to the Clipboard.
Create a Hue/Saturation adjustment layer, which will automatically have a full image white mask.
Alt+click on the H/S mask to load it into the Editing window.
Paste your copied image into the mask.
Use the H/S settings to colorize the image, using a colour that's complementary to the colour cast you want to remove. In this case, I wanted to lessen the red, so I used a cyan colour:
Set the blend mode of the H/S layer to "Screen".
The layers look like this:
The before and after:
When you look at all the settings at your disposal (Hue, Saturation, Lightness, Opacity), you're bound to find precisely the result you're looking for.
Ken

Color Balance is a simple way, not automatic though.

How do I remove the coloured bars from running down the side of my emails.

How do I remove the coloured bars from running down the side of my emails.

Hi
The setting I have in Composing are-
Composing
Message Format - Rich Text
In addressingonly have tick in When sending to a group
Responding - tick only the first two boxes
Last only the bullet for Include selected text
Hope htis helps

How can I create a new recovery key if you automatically removed my trusted device after update do iOS 8?

How can I create a new recovery key if you automatically removed my trusted device after update do iOS 8?

Hey -
I need to do the EXACT same thing, but have no idea how. Has anyone out there done this?
My situation is a tad different..this is a new Mac (and I'm a brand new Mac user). Tons of querks occur under my original account (videos won't run, Safari won't support certain plug-ins). I spent 6 hours on the phone w/ 4 different Apple Reps and nobody could fix it. A rep finally looked at my MacBook Pro in person today. He created a new account just to see if that would work and under that new account, everything works perfectly fine (no querks, can view video). He tried switching a million settings in my original account to no avail.
He said to create a new account (as he did) and move my files over to the new account and then go back to the original and delete it. How do you do this?! I can't figure it out! I've got a new account created, but of course it just has the default folders in it w/ the little red icons next to them! Thanks in advance!

How to automatically remove the wiki page's images from the Images library , when a wiki page is deleted

I have noted the following strange behavior inside my Publishing enterprise wiki site collection. Now by default when I create a new wiki page and I add Pictures to it, the pictures will be saved under the “Images” library and will be inside a unique folder
that have its name similar to the page name.
But when users delete the picture from the wiki page or they delete the whole wiki page, then the related folder inside the “Images” library will not be removed. So can anyone advice if there is a way to automatically remove the page’s pictures
folder from the Images library when the page is deleted? as currently i might end up having many pictures inside the Images library which are not linked to a wiki page, and they will waste my server desk space...

I think, not sure, there's no out-of-the-box solution in SharePoint for this problem. So I can only think of custom solution:
In event Receiver, ItemDeleting, you can delete images. The only downside is if some other pages are referring the images..... you need to check somehow which is quite time-consuming operations if you have thousand of pages in wiki library
A timer job, that will run periodically, every day or week, and clean all unused images.
Hide the default delete button and add your own. And then using your own custom layout page, show a 'configuration dialog' to user if they want to delete both page and images.
Thanks,
Sohel Rana
http://ranaictiu-technicalblog.blogspot.com
Please do not tell me this is not supported out of the ox ,,,,, i that i should handle this process by myself !!! and SharePoint does not support this feature .... this is another problem i should include in my list .....

Block is not automatically Removed

Dear All ,
The system does not automatically remove the blocking reason I, if an acceptance decision is made for the inspection lot concerned. the blocking reason I must be removed in the invoice inspection/invoice release function.
Release of invoice block u2013 can it be automated from the IL release process ?
Thanks & Regards,
Deepu.

Use MRBR for release, you can schedule a job run for this program to run every night if required.
Regards,
Vivek

Can SeeBurger BIC Mapping tool automatically remove Delimiters?

Hi all,
When we map IDOC's to EDI X12 messages using the SeeBurger BIC Mapping tool, we sometimes have delimiters occur in fields such as name or address. We are using the setDestinationDelimiter and have changed our delimiters so this occurance is rare. However the problem may still occur. This causes an invalid message to be passed to our partner.
One option is to use XI mapping and the replace function on each field however this is cumbersome and not the ideal solution.
Is there a way to automatically remove Delimiter characters from fields as part of the BIC Mapping.
Cheers,
John

Hi Satish,
Thanks for re-iterating the problem. You are absolutely right that this does cause an invalid message.
Also thanks for your suggestion regarding asking business not to enter the data, this has been done and as stated the occurences of these delimiters in the fields will be low, usually due to user error.
We still however want to cater for these occurrences and prevent an invalid message being sent to the partner.
I'm not sure if you've ever used the BIC Mapping tool and what I'm really looking for is someone with experience in this area to give a solution that works. Anyone out there who can help?
Cheers,
John

Automatically removed from group conversation for being idle?

Where I work, we have a group/team conversation for people to ask questions, make comments, share information, etc.
In the past few weeks I have noticed that I have been being removed from this group conversation. Find the message "You have been removed from this conversation."
I usually start this conversation but leave permission open for everyone so anyone can add people as they come in for later shifts. I know it's possible to right click on a person's name and remove them from the conversion.
When this started happening, I researched how to stop it from happening and found that if I changed the permissions to me alone, I am not removed from the conversation.
My questions are: does Lync automatically remove a person from a conversation if they are idle for a certain amount of time? If so, what is the time frame? Does just that person have to be idle or the entire conversation?
Essentially, I'm trying to find out if some person is actively removing me or if it's some automatic setting within Lync.

Yes there is a timeout, it's per person but mostly the entire conversation though due to "sending or receiving and instant message. You can't easily turn it off, but you can change the value a bit. See set-csclientpolicy setting
ConferenceIMIdleTimeout.
http://technet.microsoft.com/en-us/library/gg398300.aspx
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications

Moving selected objects up and down with keyboard is automaticly applying a colour fill.

Hi,
My InDesign is strangely applying a colour fill when i move an objects up or down using the directional arrow in my keyboard. If the colour pallet is open. Nudging an object up makes the pallet disappear on the first press. It then reappears on the second press while filling the object (text frame) with black. This is instensly frustrating. How can I stop this? Suggestions would be very appreciated.
I have already reset the preferences.
Cheers,

Thanks for your reply.
I fixed the problem by replacing the keyboard!
Cheers,
Nick Meadows
0421 976 704
www.nickmeadows.com
Date: Fri, 30 Mar 2012 06:01:22 -0600
From: [email protected]
To: [email protected]
Subject: Moving selected objects up and down with keyboard is automaticly applying a colour fill.
    Re: Moving selected objects up and down with keyboard is automaticly applying a colour fill.
    created by Peter Spier in InDesign - View the full discussion
I have to ask if you reset the prefs uing one of the methods in this thread: Replace Your Preferences If not, there's a good chance you left out one of the files, so please try again using one of the listed methods. And please tell us the OS and your version of ID, including the patch level. Obviously this is not normal behavior. It sounds as if the Swatches panel has focus when you are pressing the arrow keys.
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4302200#4302200
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4302200#4302200. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in InDesign by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Best way to create a collection for on-deman installs as required, but, that automatically removes clients after the install

SCCM 2007 SP2 R3. We do "on-demand" installs by having collections setup targeted with advertisements for various products, say Adobe Acrobat Pro, and when we get a request, we manually drop the client into the collection and the install
starts in a few minutes.
Problem is...some staff forget to remove the old clients from the collections.
Can a query be setup to automatically remove the client from the collection post-install, when the collection refreshes? Problem we are seeing is that whether we use a query for HAVING or for NOT HAVING the product, it then brings in all the other
computers that don't have the product...
Any way to do this, or, we have to continue to manually remove post-install?
Thanks!

Thanks, Jason...mostly just for neat and clean.
But, John also said we'd have to create an ADS Group to put them in, and use queries to bring those that need into the collection for installation, then remove them when the product shows in ARP. Which is about the same as adding them into the collection
and then never removing (we'd have a group with computers in it).
I had thought there was some way to automatically remove things from manual collections, but...guess not.

Can SharePoint automatically remove documents from "Followed Documents" list once the document is deleted?

Hi,
SharePoint 2013, I followed a document. It appears in my "Followed Documents" list. Now someone deleted the document I followed. I want the item be automatically removed from my "Followed Documents" list. How to
do this?
Many thanks!

Hi Sindy,
According to your description, my understanding is that you want to automatically delete the following documents links after the documents are deleted.
I tested the same scenario in my environment, and I got the same results as you got.
It is by design that the links will not be deleted automatically when the documents are deleted.
We need to click Stop following to clear the links.
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support

Facing problem with the code for sending an .xls attachment via email, a field value contains leading zeros but excel automatically removes these from display i.e. (00444 with be displayed as 444).kindly guide .

Facing problem with the code for sending an .xls attachment via email, a field value contains leading zeros but excel automatically removes these from display i.e. (00444 with be displayed as 444).kindly guide .

Hi Chhayank,
the problem is not the exported xls. If you have a look inside with Notepad or something like that, you will see that your leading zeros are exported correct.Excel-settings occurs this problem, it is all about how to open the document. If you use the import-assistant you will have no problems because there are options available how to handle the different columns.
Another solution might be to get familiar with ABAP2XLS-Project. I got in my mind, that there is a method implemented, that will help you solving this problem. But that is not a five minute job
~Florian

I've got music on my 4s that I can't get out of my phone. I've deleted it from ITunes and tried to manually and automatically remove (sync) and it won't come out of my phone It's gone from ITunes

I've got music on my 4s that I can't get out of my phone. I've deleted it from ITunes and tried to manually and automatically remove (sync) and it won't come out of my phone It's gone from ITunes

Well the iPod is supposed to be synced from YOUR iTunes music library, if you used other means to put music on there then the iPod is going to sync to only what's on your itunes music library when you connect it.
You need to put the files into itunes.
Far as your other issues, sounds like the drive is dying.
Check this support article for assistance
https://support.apple.com/kb/TS2380
http://reviews.cnet.com/8301-13727_7-10329819-263.html
search online for that number.

Attachments automatically removed from emails on IPad the email

When I receive emails the attachments are being automatically removed from the email on my IPad. I have LotusNotes Traveler for my work email. Any suggestions on what the problem is and how to fix it would be greatly appreciated

When I set up an email account on the iPad 4 (6.1.3), it took my information and defaulted the setup as an IMAP account. It had always been a POP account but there was no option now to set it up as a POP. Those tabs at the top were gone.
Before, I would receive the email in my inbox, read it and close it. It would stay in my inbox until I deleted it. Now, since it's an IMAP acount, as soon as I read my email on the PC (which downloads it from the server), it disappears from the iPad! I couldn't find a way to change it back to a POP.
This is how i solved it:
1. Delete the existing IMAP account
2. Add the same account but give it a bad password thereby preventing iOS setting it up as IMAP
3. At that point, it gave me the tabs where i could choose to set it us as POP. I changed the 'Incoming Server' to the POP address, entered the correct password and saved it. It verified the settings as POP and all is good with the world. Now my emails don't disappear from the iPad after I read them on the PC.
I'm not sure when or why the option for IMAP/POP disappeared from the initial setup screen & why it defaults to IMAP. Maybe it's back in iOS7.. maybe i should update.
(My email is a Cox account and I guess it can be either an IMAP or POP)

Process chain: how to automatically remove from schedule?

Hi All,
Is there a way to automatically remove a process chain from schedule when it has failed?
Thanks,
Natalie

I guess the easiest way is to access RSPC transaction and then remove it from schedule.
--> execution tab --> remove from schedule.
you can leave the process chain not active also, if it's triggered by an event, this event will not start it (if you dont want to delete or change trigger job)

Automatic removal of colour fringing of Panasonic lenses on Olympus body (micro 43) possible?

Similar Messages

Maybe you are looking for