Automatic reply from Hub Transport

Hi all
We have a Job mailbox in exchange 2010 in which job seeker sent email , I want to set automatic reply email to sender
"Email has been received"
Is there any way to do that from Hub Transport server
Regards

Hi,
We can login ECP and set autoreply rules as Marian said.
Alternatively, we can also depend on the following command:
Set-MailboxAutoReplyConfiguration [email protected] –AutoReplyState Scheduled –StartTime “9/8/2011” –EndTime “9/15/2011” –ExternalMessage “External OOF message here” –InternalMessage “Internal OOF message here”
For more information, you can refer to the following article:
http://blogs.technet.com/b/exchange/archive/2011/09/08/configure-automatic-replies-for-a-user-in-exchange-2010.aspx
If you have any question, please feel free to let me know.
Thanks,
Angela Shi
TechNet Community Support

Similar Messages

Exchange 2007 / Outlook 2013 "Your Automatic Reply Settings Cannot Be Displayed Because The Server Is Unavailable"

One of our users is having problems setting replies from Outlook on his local PC. This is an SBS 2008 Server with Exchange 2007. The client PC is running Windows 8 with Outlook 2013. This issue doesn't seem to affect other users but this
is the only client with Outlook 2013.
When trying to set an automatic reply from within Outlook 2013 we get the "Your automatic reply settings cannot be displayed because the server is unavailable". Outlook seems to be connecting and working fine so connection to the server does
exist.
Trying this same operation from owa works without issue. Please let me know what we need to do to find a solution.
Thanks so much!

Problem:
IMAP downloads inbox don't work after November patches.
If you install a fresh OS and O2K13 unpatched ,the IMAP works fine.
Fully patched O2K10 works fine too.
It worked for my customer until November patch Tuesday broke the IMAP sync.
Consultant opened case.
Response from Microsoft:
        This is with regards to the issue faced by you due to regression         caused by November security update. This is further to inform         you
that fix is out and below is the download links for 32 bit         and 64 bit of the office suites. You need to apply all 3 hotfix.         The crash issue and IMAP issue would get resolved
immediately         while the issue related to Free / Busy and OOF not getting set         would take 24-36 hours to start working once the patch is
applied.
Below
        are the KB articles:
Description
        of the Outlook 2013 hotfix package (Outlook-x-none.msp):         December 10, 2013:
http://support.microsoft.com/kb/2825652
Description
        of the Word 2013 hotfix package (Word-x-none.msp): December 10,         2013:
http://support.microsoft.com/kb/2837674
Description
        of the Office 2013 hotfix package (       2013:
http://support.microsoft.com/kb/2849994
    Description of the Office 2013 hotfix package (   December 10, 2013:
    http://support.microsoft.com/kb/2849994
Issues that this hotfix package fixes
Consider the following scenario:
You have a SharePoint Server environment that has complex             workflows.
You implement the ReceiveTimeOut registry entry to             increase the global timeout to 90 seconds.
You click Open this task             button to open a workflow task in Outlook 2013.
        In this scenario, when you click any approval option from the         popup dialog box, you receive the following error message:
This task could not be updated at this               time.
When you reply or forward an email message by using inline         replies, you cannot use the Close and Delete method of Outlook         Visual Basic for Application. Additionally, you
receive the         following error message:
Run-time error '-2147467259               (80004005)': This method can't be used with an inline               response mail
item.
Consider the following scenario:
Assume that User A is located on an on-premises Exchange             Server, and User B is located on Cloud.
Both the on-premises Exchange Server and the Cloud enables             the Federation Trust.
User A share his own calendar to User B with Full Details             permission, and send the sharing invitation to User B.
User B opens the sharing invitation from User A, click             Open this Calendar, Outlook browses to the Calendar module             and opens
the shared calendar.
        In this scenario, the shared calendar does not show any content.
Consider the following scenario:
You install Outlook 2013 on Windows Server 2008 R2 or             Windows Server 2012 with Terminal Server Role installed.
You implement the Use Cached Exchange Mode for new and             Existing Outlook Profiles Group Policy settings and enable             it.
        In this scenario, when you open the           Outlook Account Settings window, and double-click the         Exchange
account, the Use Cached           Exchange Mode check box is not checked in the popup         dialog box.
Consider the following scenario:
You have an Exchange Server that has Public Folders.
You create the Outlook Security               Settings folder under
All               Public Folders.
You publish the AdminSecurityMode registry entry and set             to a value of 1.
You configure Outlook 2013 to use cached mode.
        In this scenario, when Outlook 2013 connects to Exchange Server,         Outlook crashes.
    Description of the Word 2013 hotfix package (Word-x-none.msp):     December 10, 2013:
    http://support.microsoft.com/kb/2837674
    Assume that you open a meeting request in a separate window in     Outlook 2013. When you click
Accept and     then click
Send Reply Now,     Outlook crashes.
    Description of the Outlook 2013 hotfix package (Outlook-x-none.msp):     December 10, 2013:
    http://support.microsoft.com/kb/2825652
Issues that this hotfix package fixes
Assume that you have a recurring appointment that does not         have a subject. You make some changes to one instance of the         appointment and then save the instance. When you
try to open or         delete the instance, Outlook may crash. Additionally, when you         drag-and-drop one instance of the appointment to a different
time in the calendar, Outlook may crash.
When you reply or forward an email message by using inline         replies, you cannot use the Close and Delete method of Outlook         Visual Basic for Application. Additionally, you
receive the         following error message:
Run-time error '-2147467259               (80004005)': This method can't be used with an inline               response mail
item.
Consider the following scenario:
Assume that User A has a mailbox that is located on an             on-premises Exchange Server, and User B has a mailbox that             is located
on Cloud.
Both the on-premises Exchange Server and the Cloud enable             the federation trust.
User A share his own calendar to User B with Full Details             permission, and send the sharing invitation to User B.
User B opens the sharing invitation from User A, click             Open this Calendar, Outlook browses to the Calendar module             and opens
the shared calendar.
        In this scenario, the shared calendar does not show any content.
Consider the following scenario:
You install Outlook 2013 on Windows Server 2008 R2 or             Windows Server 2012 with Terminal Server Role installed.
You implement the Use Cached               Exchange Mode for new and Existing Outlook Profiles             Group Policy
settings and enable it.
        In this scenario, when you open the           Outlook Account Settings window, and double-click the         Exchange
account, the Use Cached           Exchange Mode check box is not checked in the popup         dialog box.
Consider the following scenario:
You have an Exchange Server that has Public Folders.
You create the Outlook Security               Settings folder under
All               Public Folders.
You publish the AdminSecurityMode
registry entry and set to a value of 1.
You configure Outlook 2013 to use cached mode.
        In this scenario, when Outlook 2013 connects to Exchange Server,         Outlook crashes.
Consider the following scenario:
You have two Active Directory forests (Forest A and Forest             B).
User A and User B have their mailboxes that are located on             Forest A.
User A share his own calendar with User B with Full             Details permission.
User B add the shared calendar and let it sync.
You move User B’s mailbox to Forest B.
        In this scenario, the shared data in the shared calendar is         removed every second time that User A restarts Outlook. And it         is re-synced
when User A browses to the Calendar module.
Unfortunately TechNet isn't coming back, sorry folks :-(
The 3 patches above immediately fixed the issue for me!
Thanks so much!

Users are not able to use Outlook 2010 to view free/busy information and cannot set Out Of Office automatic reply

Hi All,
Please help me.
I have an issue where users are not able to use Outlook 2010 to view free/busy information and cannot set Out Of Office automatic reply. But they are can set Out Of Office automatic reply from OWA. My exchange server is Ms Exchange 2010.
The test E-mail AutoConfiguration failed with this error:
Autodiscover to https://mydomain.com/autodiscover/autodiscover.xml starting
GetLastError=12175; httpStatus=0.
Autodiscover to https://mydomain.com/autodiscover/autodiscover.xml Failed (0x800C8203)
Autodiscover to https://autodiscover.mydomain.com/autodiscover/autodiscover.xml starting
GetLastError=12007; httpStatus=0.
Autodiscover to https://autodiscover.mydomain.com/autodiscover/autodiscover.xml Failed (0x800C8203)
Local autodiscover for mydomain.com starting
Local autodiscover for mydomain.com Failed (0x8004010F)
Redirect check to http://autodiscover.mydomain.com/autodiscover/autodiscover.xml starting
Srv Record lookup for http://autodiscover.mydomain.com/autodiscover/autodiscover.xml Failed (0x80072EE7)
Srv Record lookup for mydomain.com starting
Srv Record lookup for mydomain.com Failed (0x8004010F)
Any idea?
Thanks,
Pieter

OK.
Please follow this step.
1. As you said you are in coexistence step , so for now all endpoint already point to Exchange 2010 right?
2. Check legacy owa redirect that you already configure
3. In Exchange 2010 , Make sure that you already configure "Autodiscoverinternaluri" by this command set-clientaccessserver -identity "servername" -autodiscoverinternaluri
https://autodiscover.domain.com/autodiscover/autodiscover.xml. and don't forget to create autodiscover record in DNS
4. in Exchange 2010 , Make sure that you already configure "EWS" path by this command set-webservicesvertualdirectory -identity "XXX\Default web site name" -internalurl
https://yourinternalurl/EWS/Exchange.asmx -externalurl https://yourexternalurl/EWS/Exchange.asmx
5. don't forget to replicate freebusy from Exchange 2003 to Excahnge 2010 via public folder.
You error look like client cannot get autodiscover process please check it again.

Forwarding one iCloud email to another & replying from the correct address

I have 2 iCloud accounts and to make things easier for me, I want to forward one to the other, which I am aware how to do. However, when I hit "reply" to an email, the address showing is the address I am "forwarding to", NOT the address the email was initially sent to. Is there a way to change/fix this, so that when I press "reply" it will automatically reply from what ever email address it was sent to?
Thanks for any help!

First, turn everything off for iCloud...contacts, calendars, FaceTime, iMessage, notes, Find My Phone, etc. You'll be prompted to keep the data on your phone or delete it...select keep. Then: Settings>iCloud...scroll down...delete account. Then, set everything back up using your new ID.

Adding new Hub Transport server in existing environment

Hi everyone,
Currently we have 5 exchange servers 2010 :
2 CAS Servers (Virtual)
2 MB and Hub Transport servers (Physical)
1 Edge server in DMZ. (Virtual)
Now I have added 2 more servers
with MB and Hub Tranport Roles (VIRTUAL) and want to configure the mail flow from these new transport servers.
Can anyone help with the steps I should follow. Please note we have 1 existing Edge server in 2010 and email flow should be from Hub Transport to Edge server then from Edge to internet.
Existing environment is working fine without any issues. Main reason to do this is to virtualize the physical servers. Mailbox DB already migrated to new servers.
Thanks.
Manish Kumar MCSA, MCITP Enterprise Admin. MCTS Exchange server 2007, MCITP Virtualization Admin.

Dear Manish
Please find your answers below
For mail flow to happen through new hub transport I will make the new edge subscription from new HUB server
to Edge server. Is there any other changes I have to do ?
No other changes is required
Create a new edge subscription and then import it and run start endge sync
So when I will do create the new edge subscription then it will delete the old send connectors and will
create the new one?
IT will create old edge sync and create a new edge sync which will not make any impact on your config
Will there be any downtime while doing this activity ?
Better to do this on after production hours since definitely there will be mail delay and may delay more if you try this on production hours
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com Thanks Sathish (MVP)

Automatic reply office 2010 sp2

hi,
users used to do their own automatic reply from outlook 2010 sp2 now they cannot do it i thought it was from the office 365 but its workin g on 2013 office every time any user want an automatic reply i have to do it for him from the OWA any
one can help me is any latest update for office.
thank you in advance.

Hi,
From your description, automatic reply works well when using Outlook 2013. When using Outlook 2010, it can't work well, the issue should be related to Outlook side, I recommend you install the latest Outlook 2010 Service Pack and check the result.
What's more, here is a helpful thread for your reference:
Outlook 2010 with Exchange 2010 out of office not working
https://social.technet.microsoft.com/Forums/exchange/en-US/019e542f-ebe6-4f4b-b251-898350a40567/outlook-2010-with-exchange-2010-out-of-office-not-working
Hope this can be helpful to you.
Best regards,
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Amy Wang
TechNet Community Support

How do you automatically include from a reply

How do you automatically include
< <
from a reply to someonelses post.
Do you type it manually

BTW, in case there are any Americans out there,AA
has
nothing at all to do with alcohol dependency inthis
case - it's the Automobile Association.
RObinThanks for that
RPWithey and God bless you
By George he's got it!
That's not what he asked for :?

Hub Transport Server Routing

Hello All,
We have two AD sites consist of below. Exchange 2010 HT server @ Site 1 is routing mails to both Hub transport Servers @ Site 2. How do i enforce HT server @ site 1 to send all to 2010 HT server @ Site 2 without shutting down the 2007 HT.
Site 1
AD 2008 Server
Exchange 2010 HT/CAS
Exchange 2010 Mailbox
Site 2
AD 2008 Server
Exchange 2010 HT/CAS -> Send Connector source server for external domain.
Exchange 2010 Mailbox
Exchange 2007 HT/CAS

There are by default hidden internal connectors between all the Hub Transport servers so emails can be routed out-of-the-box automatically to all parts of the mail infrastructure without any additional need for manual connectors. It would be good to turn
up logging on these hidden connectors by running the cmdlet below (source is
here, section "Use the Shell to enable or disable protocol logging on the intra-organization Send connector"). This will yield if indeed mails are routed from your 2010 HT in Site1 to the 2007 HT in Site2.
If all mailboxes are moved from 2007, what is the point of keeping that server online ? For manually blocking connections - or making it so that a connection to it is not selected you could either (1) change the default IP ranges the 2007 listens on as to
avoid the 2010 HT in the first site or (2) create a separate AD site specifically for the 2007 HT server's IP (this will increase the cost of the route from the 2010 HT in Site1, making it unattractive for delivering outside mails. However please note that
these 2 methods are overkill and it would be best to see the exact reason of still keeping the 2007 box.

Exchange 2010 hub-transport server

i have 2 exchange 2010 hubtransport servers.
ideally when i send email my email should be load-balanced but emails send using hubcas1 goes fine and hubcas2 kepts in queues
suppose if i send at a time 5 mail
3 emails go through hubcas1
2 emails stucks in queue in hubcas2

Hi,
As you said you have added both the hub transport servers in the source server option of the send connector.Same time you have mentioned you don't have the smart host to deliver the emails to the internet and also the server hubcas2 can able to resolve the
external domain namespaces .Then do the following .
step 1 :Then please enable the protocol logging on the send connector to see the why the connections from the server hubcas2 is rejected to send emails to internet.
Step 2: Then do the outbound email test from EXRCA tool by using the ip address or name which is mapped on the MX record which belongs to the server hubcas2.
Please feel free to reply me if you have any queries .
Regards
S.Nithyanandham
Thanks & Regards S.Nithyanandham

Out of Office error: 'Your automatic reply settings cannot be displayed because the server is currently unavailable. Try again later.'

Hi,
This is my first post in the forums. Please forgive me if it's in the wrong category or if it's not posted correctly in any way.
I'll try and give you below as much information about the problem we have here as I can.
What we have:
- an on-premises Windows 2012 Standard server that is the PDC, DNS and DHCP server;
- a second Windows 2012 Standard server with the sole purpose of hosting our Exchange 2013 CU7 server;
- Windows 7 PCs with Office Home and Business 2010 v.14.0.7143.5000 (32-bit);
- Outlook 2010 connects through Outlook Anywhere (mail.ourdomain.com).
The problem:
If trying to set up Out of Office through Outlook on the client PCs, we'd get an error message: 'Your automatic reply settings cannot be displayed because the server is currently unavailable. Try again later.' Interestingly, it does work normally for some users.
It works fine for all users if done through OWA.
Tests performed:
User 1 on PC1 has the problem. User 2 on PC2 doesn't have the problem. Both users are members of the same security groups.
- setting up User 2 on PC 1: the problem exists;
- setting up User 1 on PC 2: the problem exists;
- setting up a second Outlook profile on PC2 within User 2's domain account (the one that works), for the same User 2: the problem still exists!
I haven't been able to set up an Outlook account that works since this issue was discovered, although there are existing Outlook accounts that do not have the issue.
Let me also point out we have another issue we are working on and which may or may not be related: the Autodiscover function in Outlook doesn't work. Test E-mail AutoConfiguration results in 'Autoconfiguration was unable to determine your settings!'.
I can see postings in the Internet of other people having the same problem with OoO, but couldn't see a solution that fits my case: some existing accounts in Outlook are fine, other are not and newly created profiles of aforementioned working accounts do not
work. The majority of the articles/threads I read suggest recreating the Virtual Directories in Exchange, but we did that just a month ago (when troubleshooting the Autodiscover problem) and besides if the problem is in the Virtual Directories, I would expect
it to affect all accounts.
Any help in resolving this problem would be greatly appreciated. Please let me know if you need other details.
Apologies if the posting is not in the right place or not done properly - I'm still learning.

The IIS log files on the CAS might tell you something. Depending on how your proxy server handles NAT the IP address of your connection might be from the proxy server instead of your client.
In any case, a tool like Fiddler (http://www.telerik.com/fiddler) can be extremely helpful in working on problems like this because it can decode the SSL traffic on the client and you can see what's being sent
and what's being received.
Another thing to check (although it's unlikely to be your case) is whether or not your browser (when you try connecting to the autodiscover URL) thinks it's in the "Internet" zone. the "Local intranet", or at a "Trusted" site.
The domain names you use on machines on your LAN should be excluded from being proxyed. Anything with "." in the name will be set, unless excluded, to the proxy server.
Is the time correct on the client machine? Is it more than 5 minutes different to the Exchange machines and domain controllers? That'd be something that would cause Kerberos to fail.
A certificate can be a problem if its expired or if it doesn't have the correct names. But I wouldn't worry about the uglog.com domain just yet. Until you get the Autodiscover working with the SCP you have bigger problems.
If you've never used a WPAD file then don't worry about it. It's very useful if you have a complex network and you want to manage how browsers connect to servers. For example, if you have multiple proxy servers the each manage a different set of names, an/or
if some names should bypass proxy servers entirely and just connect directly. If run a strictly Microsoft network with only Microsoft product that you can manage with GPOs (and you can enforce those GPOs on every machine -- even the BYOD ones) you probably
don't need a WPAD.
--- Rich Matheisen MCSE&I, Exchange MVP

Office 365 x64 Click-to-Run Not Automatically Updating from Network Share

We are piloting Office 365 x64 and pointing the clients to a network share (see config file below) for updates. When we subsequently download the updates to the share the clients will not automatically install them. If we manually do so from
within an app (File > Account > Update Options > Update Now) it works fine. The ACL and Sharing permissions allow Everyone and Domain Computers read-only access (in addition to some other ancillary accounts). I've tried manually running
the Office Automatic Updates from Task Scheduler and left the box running overnight. I've rebooted, logged back on, closed and opened the app several times. Nothing happens, just always sits at the current version.
Anyone have any ideas?
      Thanks,
         Bryan
Here's the UpdateURL registry key:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Office\15.0\ClickToRun\Configuration\UpdateUrl = \\<SERVERNAME>\Office_365\Pilot
ProPlusx64.xml:
<Configuration>
<Add OfficeClientEdition="64" >
<Product ID="O365ProPlusRetail">
<Language ID="en-us" />
</Product>
</Add>
<Updates Enabled="TRUE" UpdatePath="\\<SERVERNAME>\Office_365\Pilot\" />
<Display Level="None" AcceptEULA="TRUE" />
<Logging Name="OfficeSetup.txt" Path="%temp%" />
<Property Name="AUTOACTIVATE" Value="1" />
<Property Name="FORCEAPPSHUTDOWN" Value="TRUE" />
</Configuration>
Here's what I think is the log file:
Timestamp Process TID Area Category EventID Level Message Correlation
05/01/2015 11:21:11.061 OFFICECL (0x550) 0x554 Click-To-Run Telemetry aqkhc Medium {"SessionID":"bfe53625-5d12-4e1a-b3b4-2d8e88b0d108","GeoID":"244","Ver":"15.0.4615.1002","ExeVer":"15.0.4615.1002","SecuritySessionId":"0","ModulePath":"C:\Program Files\Microsoft Office 15\ClientX64\OfficeClickToRun.exe","CommandLine":"/service","Bitness":"64","IntegrityLevel":"0x4000"}
05/01/2015 11:21:11.061 OFFICECL (0x550) 0x554 Click-To-Run Telemetry aqkhe Medium {"SessionID":"bfe53625-5d12-4e1a-b3b4-2d8e88b0d108","GeoID":"244","Ver":"15.0.4615.1002","OSVersion":"6.1","SP":"1","ProductType":"1","ProcessorArch":"9","Locale":"1033"}
05/01/2015 11:21:11.061 OFFICECL (0x550) 0x568 Click-To-Run annt7 Medium ProcessPool::Initialize - Initializing Main Process Pool
05/01/2015 11:21:11.061 OFFICECL (0x550) 0x568 Click-To-Run annuf Medium SystemProcessPool::DoInitialize - Initializing System Process Pool
05/01/2015 11:21:11.061 OFFICECL (0x550) 0x568 Click-To-Run anntv Medium ConfigurationManager::Initialize - Initializing ConfigurationManager
05/01/2015 11:21:11.061 OFFICECL (0x550) 0x568 Click-To-Run annt4 Medium Pipeline::Initialize - Initializing pipeline with PipelineServerName: "ClickToRun_Pipeline" and InstallationPath: "C:\Program Files\Microsoft Office 15"
05/01/2015 11:21:11.154 OFFICECL (0x550) 0x568 Click-To-Run annt1 Medium Orchestration::Initialize - Initializing Orchestration
05/01/2015 11:21:11.201 OFFICECL (0x550) 0x568 Click-To-Run annto Medium ApiServer::Initialize - Initializing ApiServer for endpoint: C2RClientAPI_Server_System
05/01/2015 11:24:50.661 OFFICECL (0x550) 0x828 Click-To-Run annty Medium ExecutionContext::QueueScenario - Set executing scenario to UPDATE
05/01/2015 11:24:50.661 OFFICECL (0x550) 0x828 Click-To-Run annuz Medium TaskFactory::TryLoadScenario - Start loading UPDATE scenario
05/01/2015 11:24:50.661 OFFICECL (0x550) 0x828 Click-To-Run annu0 Medium TaskFactory::TryLoadScenario - Loading UPDATE scenario is successful
05/01/2015 11:24:50.676 OFFICECL (0x550) 0x828 Click-To-Run amavh Medium ScenarioController::Initialize - requested display level: False
05/01/2015 11:24:50.676 OFFICECL (0x550) 0x828 Click-To-Run annua Medium ProcessPool::QueueTaskItem - Task SCENARIO:{AC2F0D89-6518-48E9-A0D9-EF039C456034} is being scheduled to run in this process
05/01/2015 11:24:50.676 OFFICECL (0x550) 0x828 Click-To-Run aoicd Medium ExecutionContext::QueueScenario - Successfully queue scenario UPDATE.
05/01/2015 11:24:50.676 OFFICECL (0x550) 0xf6c Click-To-Run annua Medium ProcessPool::QueueTaskItem - Task UPDATEDETECTION:{77176F9C-873B-4A7D-8051-EBEB52DDE8B0} is being scheduled to run in this process
05/01/2015 11:24:50.676 OFFICECL (0x550) 0xf6c Click-To-Run annvj Medium Worker::TaskExecutionThreadProc - Task SCENARIO:{AC2F0D89-6518-48E9-A0D9-EF039C456034} completed with TaskState TASKSTATE_EXECUTING.
05/01/2015 11:24:50.676 OFFICECL (0x550) 0xf6c Click-To-Run annu6 Medium TaskGroup::DoHandleWorkerCompleteEvent - Task {AC2F0D89-6518-48E9-A0D9-EF039C456034} complete event is handled by task {AC2F0D89-6518-48E9-A0D9-EF039C456034}
05/01/2015 11:24:50.676 OFFICECL (0x550) 0xf6c Click-To-Run apm4n Medium TaskGroup::Finalize - Task AC2F0D89-6518-48E9-A0D9-EF039C456034 is not finished.
05/01/2015 11:24:50.676 OFFICECL (0x550) 0xf70 Click-To-Run Telemetry amb0n Medium TaskUpdateDetection::ApplySettings: Beginning Update Scenario. {"SessionID":"bfe53625-5d12-4e1a-b3b4-2d8e88b0d108","GeoID":"244","Ver":"15.0.4615.1002","TargetVersion":"UNDEFINED","InstallID":"C5912794-7300-4A10-840B-575B03DB98F8","TaskId":"77176F9C-873B-4A7D-8051-EBEB52DDE8B0","TaskState":"TASKSTATE_EXECUTING","UpdatePathType":"CUSTOM","TaskType":"UPDATEDETECTION:{77176F9C-873B-4A7D-8051-EBEB52DDE8B0}","Scenario":"UPDATE","TriggeringUI":"UNDEFINED","TaskCaller":"SCHEDULEDTASK"}
05/01/2015 11:24:50.676 OFFICECL (0x550) 0xf70 Click-To-Run Telemetry aoh6s Medium TaskUpdateDetection::Execute: Ending Update scenario, task trigger source disabled. {"SessionID":"bfe53625-5d12-4e1a-b3b4-2d8e88b0d108","GeoID":"244","Ver":"15.0.4615.1002","InstallID":"C5912794-7300-4A10-840B-575B03DB98F8","TaskState":"TASKSTATE_EXECUTING","TaskId":"77176F9C-873B-4A7D-8051-EBEB52DDE8B0","TaskType":"UPDATEDETECTION:{77176F9C-873B-4A7D-8051-EBEB52DDE8B0}","Scenario":"UPDATE"}
05/01/2015 11:24:50.676 OFFICECL (0x550) 0xf70 Click-To-Run annvj Medium Worker::TaskExecutionThreadProc - Task UPDATEDETECTION:{77176F9C-873B-4A7D-8051-EBEB52DDE8B0} completed with TaskState TASKSTATE_FAILED.
05/01/2015 11:24:50.676 OFFICECL (0x550) 0xf70 Click-To-Run apm4b Medium Task::DoHandleWorkerCompleteEvent - Setting Task (77176F9C-873B-4A7D-8051-EBEB52DDE8B0) Task State to (TASKSTATE_FAILED)
05/01/2015 11:24:50.676 OFFICECL (0x550) 0xf70 Click-To-Run aqkg7 Medium Task::DoHandleWorkerCompleteEvent - No event is specified for task (77176F9C-873B-4A7D-8051-EBEB52DDE8B0)
05/01/2015 11:24:50.676 OFFICECL (0x550) 0xf70 Click-To-Run Telemetry apm4e Medium Task::HandleTaskStateFailed - Handling TaskState (TASKSTATE_FAILED) for task (77176F9C-873B-4A7D-8051-EBEB52DDE8B0). {"SessionID":"bfe53625-5d12-4e1a-b3b4-2d8e88b0d108","GeoID":"244","Ver":"15.0.4615.1002","InstallID":"C5912794-7300-4A10-840B-575B03DB98F8","TaskState":"TASKSTATE_FAILED","TaskId":"77176F9C-873B-4A7D-8051-EBEB52DDE8B0","TaskType":"UPDATEDETECTION:{77176F9C-873B-4A7D-8051-EBEB52DDE8B0}","Scenario":"UPDATE"}
05/01/2015 11:24:50.676 OFFICECL (0x550) 0xf70 Click-To-Run apkpk Monitorable ScenarioController::CheckProcessPool - Failed to get/create ui process pool, and we are not the ui handler. Cannot process event
05/01/2015 11:24:50.676 OFFICECL (0x550) 0xf70 Click-To-Run annu6 Medium TaskGroup::DoHandleWorkerCompleteEvent - Task {77176F9C-873B-4A7D-8051-EBEB52DDE8B0} complete event is handled by task {AC2F0D89-6518-48E9-A0D9-EF039C456034}
05/01/2015 11:24:50.676 OFFICECL (0x550) 0xf70 Click-To-Run apm4p Medium TaskGroup::DoCancel - Attempting to cancel task {AC2F0D89-6518-48E9-A0D9-EF039C456034}
05/01/2015 11:24:50.676 OFFICECL (0x550) 0xf70 Click-To-Run apm4a Monitorable Task::DoCancel - Can't cancel task (77176F9C-873B-4A7D-8051-EBEB52DDE8B0) because it is in TASKSTATE_FAILED state
05/01/2015 11:24:50.676 OFFICECL (0x550) 0xf70 Click-To-Run apm39 Medium Task::DoCancel - Task (57173191-24E0-42E1-96F4-914AF8CFD1D5) in TASKSTATE_NOTSTARTED, set to Cancelled.
05/01/2015 11:24:50.676 OFFICECL (0x550) 0xf70 Click-To-Run apm39 Medium Task::DoCancel - Task (AA63EED2-70B9-4E21-952C-9CFB09EC37C0) in TASKSTATE_NOTSTARTED, set to Cancelled.
05/01/2015 11:24:50.676 OFFICECL (0x550) 0xf70 Click-To-Run apm4p Medium TaskGroup::DoCancel - Attempting to cancel task {D1506E3F-4B2A-41D3-913B-FA3E889CE20D}
05/01/2015 11:24:50.676 OFFICECL (0x550) 0xf70 Click-To-Run apm4p Medium TaskGroup::DoCancel - Attempting to cancel task {539BA5C1-BC18-4D11-AF61-CF6EDC58DC33}
05/01/2015 11:24:50.676 OFFICECL (0x550) 0xf70 Click-To-Run apm39 Medium Task::DoCancel - Task (D1E1E548-917D-4D75-8AE5-FC76856C66DC) in TASKSTATE_NOTSTARTED, set to Cancelled.
05/01/2015 11:24:50.676 OFFICECL (0x550) 0xf70 Click-To-Run apm4p Medium TaskGroup::DoCancel - Attempting to cancel task {9A54EEBA-7B8D-4BD5-8EFE-D21E58FFFEE3}
05/01/2015 11:24:50.676 OFFICECL (0x550) 0xf70 Click-To-Run apm4p Medium TaskGroup::DoCancel - Attempting to cancel task {9C141B7D-2B22-4C33-9C5C-F6F3394AD19E}
05/01/2015 11:24:50.676 OFFICECL (0x550) 0xf70 Click-To-Run apm4p Medium TaskGroup::DoCancel - Attempting to cancel task {501487AD-0A47-419D-AF30-B9E616A4579B}
05/01/2015 11:24:50.676 OFFICECL (0x550) 0xf70 Click-To-Run apm4p Medium TaskGroup::DoCancel - Attempting to cancel task {0270BAF9-3CE0-46EE-A3FE-099ABC06BC14}
05/01/2015 11:24:50.676 OFFICECL (0x550) 0xf70 Click-To-Run apm39 Medium Task::DoCancel - Task (F0E5AF5D-5D82-4370-A2A6-C064CBC39247) in TASKSTATE_NOTSTARTED, set to Cancelled.
05/01/2015 11:24:50.676 OFFICECL (0x550) 0xf70 Click-To-Run apm4o Medium TaskGroup::Finalize - Finalizing task 0270BAF9-3CE0-46EE-A3FE-099ABC06BC14.
05/01/2015 11:24:50.676 OFFICECL (0x550) 0xf70 Click-To-Run apm4o Medium TaskGroup::Finalize - Finalizing task 501487AD-0A47-419D-AF30-B9E616A4579B.
05/01/2015 11:24:50.676 OFFICECL (0x550) 0xf70 Click-To-Run apm39 Medium Task::DoCancel - Task (A5E75ADF-8BF1-44C4-8900-1BE6070EB609) in TASKSTATE_NOTSTARTED, set to Cancelled.
05/01/2015 11:24:50.676 OFFICECL (0x550) 0xf70 Click-To-Run apm4o Medium TaskGroup::Finalize - Finalizing task 9C141B7D-2B22-4C33-9C5C-F6F3394AD19E.
05/01/2015 11:24:50.676 OFFICECL (0x550) 0xf70 Click-To-Run apm4o Medium TaskGroup::Finalize - Finalizing task 9A54EEBA-7B8D-4BD5-8EFE-D21E58FFFEE3.
05/01/2015 11:24:50.676 OFFICECL (0x550) 0xf70 Click-To-Run apm4o Medium TaskGroup::Finalize - Finalizing task 539BA5C1-BC18-4D11-AF61-CF6EDC58DC33.
05/01/2015 11:24:50.676 OFFICECL (0x550) 0xf70 Click-To-Run apm4o Medium TaskGroup::Finalize - Finalizing task D1506E3F-4B2A-41D3-913B-FA3E889CE20D.
05/01/2015 11:24:50.676 OFFICECL (0x550) 0xf70 Click-To-Run apm4o Medium TaskGroup::Finalize - Finalizing task AC2F0D89-6518-48E9-A0D9-EF039C456034.
05/01/2015 11:24:50.676 OFFICECL (0x550) 0xf70 Click-To-Run apm4o Medium TaskGroup::Finalize - Finalizing task AC2F0D89-6518-48E9-A0D9-EF039C456034.
05/01/2015 11:24:50.676 OFFICECL (0x550) 0xf70 Click-To-Run annt0 Medium ExecutionContext::ResetExecutingScenario - Reset executing scenario

Hi,
I replied in the other thread:
http://social.technet.microsoft.com/Forums/office/en-US/e9e6be40-fb92-4734-9f94-9dee5599b1d8/office-365-pro-plus-2013-update-wont-apply-automatically?forum=officeitpro#c156ed8c-f65c-450c-9e0f-85f0de513c20
It seems when the install finished it added an extra Office\Data to the path. My path should be \\hsbswpush02\GPsoftware\o365\Office\Data\15.0.4551.1005
but it shows
\\hsbswpush02\GPsoftware\o365\Office\Data\Office\Data15.0.4551.1005
If I edit the path and delete the extra Office\Data Office 365 ProPlus updates from my network location. I cannot figure out why it is adding the extra Office\Data to the path.
My config file looks like this:
  <Updates Enabled="TRUE" UpdatePath="\\hsbswpush02\GPsoftware\o365\Office\Data" />
have you tried omitting the \Office\Data element, from the Updates element ?
http://technet.microsoft.com/en-us/library/jj219426.aspx#BKMK_UpdatesElement
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Microsoft Outlook 2010 & 2013 cannot set automatic reply settings

Hello,
We cannot seem to set automatic reply's within outlook 2010 & 2013. We have an exchange server 2010. We
can setup automatic reply through OWA absolutely fine. The error that we receive is 'Your automatic reply settings cannot be displayed because the server is currently unavailable. Try again later.
However we can setup out of office on any other office version below 2010 fine. We have run through
a number of tests and have come to the conclusion that the auto discover service is not configured correctly. I have been told to run through the following
"We need to make sure the IIS service is assigned to the certificate which includes mail.mydomainname.co.uk
name:
Enable-ExchangeCertificate -Thumbprint 62C247B3BD081D0A8B074D4A928A76E6DA3BABBA -Services
POP,IMAP,SMTP,IIS
Then restart IIS service
to apply the changes.
If the user is connect
to mailbox from external environment as your test results, it is recommended to add the autodiscover.mydomain.co.uk name in your certificate with IIS service. If so, the autodiscover
service can be accessed successfully in your posted second steps(https:/autodiscover.mydomain.co.uk/autodiscover/autodiscover.xml). Alternatively, if you don’t want to change your certificate configuration, we need to create a new SRV record for mail.mydomainname.co.uk
to make your autodiscover succeed in last steps of Srv Record lookup method".
So I followed this and opened Exchange Managemnet Shell and ran the following.....
'Enable-ExchangeCertificate -Thumbprint 62C247B3BD081D0A8B074D4A928A76E6DA3BABBA -Services POP,IMAP,SMTP,IIS'
The following output was displayed:
"VERBOSE: Connecting to SERVER2011.EXCHANGE.local
VERBOSE: Connected to SERVER2011.EXCHANGE.local.
[PS] C:\Windows\system32>Enable-ExchangeCertificate -Thumbprint 62C247B3BD081D0A8B074D4A928A76E6DA3BABBA -Services POP,I
MAP,SMTP,IIS
WARNING: This certificate will not be used for external TLS connections with an FQDN of 'SERVER2011.EXCHANGE.local'
because the CA-signed certificate with thumbprint '71ADF367E190E269C1036BBF4A09C55E62536791' takes precedence. The
following receive/send connectors match that FQDN: Default SERVER2011.
WARNING: This certificate will not be used for external TLS connections with an FQDN of
'mail.companyname.co.uk' because the CA-signed certificate with thumbprint
'67ECB1A383CBD05424C58F6A5E753C9377F49D3D' takes precedence. The following receive/send connectors match that FQDN:
Windows SBS Internet Receive SERVER2011, Fax/Printer.
Confirm
Overwrite the existing default SMTP certificate?
Current certificate: '67ECB1A383CBD05424C58F6A5E753C9377F49D3D' (expires 09/08/2015 09:06:17)
Replace it with certificate: '62C247B3BD081D0A8B074D4A928A76E6DA3BABBA' (expires 06/08/2015 17:05:22)
[Y] Yes [A] Yes to All [N] No [L] No to All [?] Help (default is "Y"):"
I opened up 'Internet Information
Services (IIS) Manager to find 2 Server Certificates issues to 'mail.companyname'
with the certificate hash' 62C247B3BD081D0A8B074D4A928A76E6DA3BABBA' and '71ADF367E190E269C1036BBF4A09C55E62536791'.
I opened up the Exchange Management
Console to confirm that the IMAP, POP, IIS, and SMTP services are bound to both of the certificates for 'mail.companyname'.co.uk
I need to know if it is okay to proceed in replacing the certificate and running this
command.
Thank you

Hi,
We have this problem with some of our users, in that they get the server unavailable error when trying to activate the out of office.
In our case this is because the Proxy is blocking the connection from the PC to the Exchange, so we just go to Internet Options - Connections - LAN Settings - Advanced (under proxy server) then just add *.domain.com into the Exceptions box at the bottom.
This seems to resolve the issue and allow them to set their out of office. The only reason this reoccurs for these users is because their roaming profile for some reason won't save the proxy settings, which is a different issue.
Hope this helps.

Outlook 2013: Your Automatic Reply Settings Cannot Be Displayed Because The Server Is Unavailable

When I configure the Outlook profile manually then receive warning "Your Automatic Reply Settings Cannot Be Displayed Because The Server Is Unavailable" when clicking "Automatic Replies (Out of Office)".
However if I use Autodiscover to configure the Outlook profile the above does not occur and "Automatic Replies (Out of Office)" works fine.
Client: Outlook 2013 Click-to-Run version 15.0.4551.1011 on Windows 7 Pro SP1.
Server: Exchange 2007 SP3 on Windows SBS 2008 SP2.

Hi,
First of all, please make sure you have installed this Outlook 2013 hotfix package (December 10, 2013):
http://support.microsoft.com/kb/2825652/en-us
It may fix the issue.
If the hotfix doesn't help, please note, this problem can occur after your primary SMTP address changes. The problem occurs because your previous primary SMTP address is cached in the Windows registry under your Outlook profile and this information does
not get refreshed for 24-48 hours after the SMTP address change.
So please make sure you have configured smtp address correctly, or, we can find some workarounds from the link below:
http://support.microsoft.com/kb/2693800/en-us
Regards,
Melon Chen
TechNet Community Support

How can I stop music and movies from being automatically deleted from my phone and saved on the cloud? I've just tried to watch a movie on my 2 hour commute, but yet AGAIN it has been removed. I do NOT want to spank all of my data allowance

How can I stop music and movies from being automatically deleted from my phone and saved on the cloud? I've just tried to watch a movie on my 2 hour commute, but yet AGAIN it has been removed. I do NOT want to spank all of my data allowance downloading it again, especially because (believe it or not) I added it to my phone because that's precisely where I wanted it!! Any help much appreciated

FYI I had to put this link into firefox to reply - because **** back safari just wouldn't register my clicks to any of the links on the post... Despite reloadeing and even restarting my computer. Totally annoying and a massive pain in the ***.
But in terms of my initial query; thanks for responding. But no, this is NOT the cause of the problem. I have auto sync and sync over wifi activated, but have also selected manually manage music and videos. Plus, all of my music and videos are on my macbook, absolutely all of it, so if it my phone was syncing with my macbook everything would still be on the phone. Life would be peachy if my phone jsut copied everything that was on my macbook, but unfortuantely it keeps deleting tracks for no apparent reason.
Any thoughts greatly welcomed, because at the moment i can only conclude that my iphone is crap.

How do I set up my mail to automatically reply that we are on holiday?

How do I set up my mail to automatically reply that we are on holiday?

From Mail Help:
You can create a rule to have Mail automatically reply to incoming messages. For example, you can set up a rule that’s triggered by a specific subject so that Mail replies automatically to all messages with that subject.
This feature is useful if you receive a lot of similar messages from an online form on a website, and you want to reply automatically.
To automatically reply to messages:
Choose Mail > Preferences and click Rules.
Click Add Rule and type a descriptive name for the rule.
Set the conditions necessary for the rule to apply to a message.
From the “Perform the following actions” pop-up menu, choose “Reply to Message.”
Click “Reply message text” and enter the text for your reply message.
Mail will include the text you enter, along with the full text of the original message, in the message that it sends.
Mail must be running to automatically reply to messages, because rules aren’t processed while your computer is shut down or you’re logged out. To set up automatic replies while you’re on vacation, ask your email service provider how to set up an out-of-office reply.
Carefully consider the rules you create for sending automated replies. If they’re too broad, you can send messages inadvertently or create message loops (replies to replies you sent). If possible, test the rule.
After a rule has processed a message, the message’s status icon changes to a gray arrow to indicate a reply was sent.

Automatic reply from Hub Transport

Similar Messages

Maybe you are looking for