"Automatic running highlight with cursor"function exists on Crystal report?

Dear sir,
Is there "Automatic running highlight with cursor" function in Crystal report ?
Thanks a lot in advance for your advice!
Best regards,
Lai Oberdorf

Dear Ingo,
thanks for your help always.
Automatic highlight with the cursor, is like the report on the following link :
http://www.ibm.com/annualreport/2007/cfs_cf.shtml
The highlignt is automatically showed up with the mouse cursor places on the report.
Thanks a lot !
Best regards from Walldorf:-)
Lai

Similar Messages

  • How to use functional module in crystal report

    Hi all,
          I have imported my functional module to crystal report,
          but when i am previewing it  i am not getting data in that, according to my functional module.
          how to run my functional module through crystal report.
    thanks in advance

    Post Author: mewdied
    CA Forum: .NET
    'EXPORT to EMAIL        ''' Code for exporting the report to Mapi (.Net Windows application)        ''' *For a Web application you must export to disk as a PDF file first.
            crReportDocument.Load(Application.StartupPath + "\World Sales Report.rpt")        crMicrosoftMailDestinationOptions = New MicrosoftMailDestinationOptions        With crMicrosoftMailDestinationOptions            .MailCCList = "[email protected]"            .MailToList = "[email protected]"            .MailSubject = "Attached exported report"            .UserName = "admin"            .Password = "password"        End With
            crExportOptions = crReportDocument.ExportOptions        With crExportOptions            .DestinationOptions = crMicrosoftMailDestinationOptions            .ExportDestinationType = ExportDestinationType.MicrosoftMail            .ExportFormatType = ExportFormatType.PortableDocFormat        End With
            'Add some error handling        Try            crReportDocument.Export()            MsgBox("Report exported successfully.")        Catch err As Exception            MessageBox.Show(err.ToString())        End Try
    Hope this helps

  • Not able to Access R/3 Tables, Function Modules through Crystal Reports

    Hi Gurus,
    I am working on Crystal Reports 2008 - V12.2.0,  When I am trying to connect SAP R/3 system through the Data  connectivity SAP Table,Cluster or FM, 
    I could see only the very few tables ,  and cannot see all Tables and not any Info sets or Function Modules, 
    But, I can access BW system,  problem facing only with SAP R/3 system,
    Suggest me on this,
    Thanks
    Siva

    Hey here..,,
    There is a limitation to show all Tables, Function Modules in Crystal reports for R/3. To see them,
    In Options:
    You will see Table_Name Like%: Text box, go there and give the starting or ending characters of FM's.
    Eg: Z% or %Z
    Then Click on Ok.
    Now try to connect to R/3 again or Refresh the Connection, it will list out as you opted.
    Hope it should help you.
    Thank You!!

  • Bapi Function call from Crystal reports 2008. import parameters syntax.

    Dear,
    I have an issue with calling a function directly from Crystal reports (2008) in the R3 system.
    (if this belongs in another thread , please add the link if moved !)
    I try to get data through function "BAPI_CLASS_GET_CLASSIFICATIONS".
    Till now all possible input parameters have no data-result.
    I already read other threads stating that 'for example' the Language key needs to be provided in a single character. 'E' in stead of 'EN'.
    I also already created a Z-wrap-function that fills out all input parameters 'hardcoded'. This works.
    clearly there are som syntax changes in passing the values to R3 when called from Crystal Reports.
    Can someone state which syntax has to be followed for numeric fields, for datefields etc. (so when i make these dynamical, I know which syntax should be the outcome of the formula)
    in my function that doesn't work I use these selections:
    (this function is called in a standard report only calling this function)
    {BAPI_CLASS_GET_CLASSIFICATIONS_1.I_LANGU_ISO} = "E" and
    {BAPI_CLASS_GET_CLASSIFICATIONS_1.I_LANGU_INT} = "E" and
    {BAPI_CLASS_GET_CLASSIFICATIONS_1.T_CLASS_OBJECTS.OBJECT_TYPE} = "MARA" and
    {BAPI_CLASS_GET_CLASSIFICATIONS_1.T_CLASS_OBJECTS.OBJECT_KEY} = "000000000000000085" and
    {BAPI_CLASS_GET_CLASSIFICATIONS_1.I_CLASSNUM} = "DSWTEST" and
    {BAPI_CLASS_GET_CLASSIFICATIONS_1.I_CLASSTYPE} = "001" and
    {BAPI_CLASS_GET_CLASSIFICATIONS_1.I_KEY_DATE} = Date (2011, 08, 05)
    I already tried other languages or the 'EN' as input.
    (I would like to know how the date is passed exaclty to R3.)
    The function is of course RFC enabled.
    when I call the my Z-function with predefined inputparameters in R3 it does give the wanted result.
    FUNCTION ZBAPI_CLASS_GET_CLASSIFICATION.
    ""Local Interface:
    *"  TABLES
    *"      OBJECT_CLASSIFICATION STRUCTURE  BAPI_OBJECT_VALUES
    *"      CLASS_OBJECTS STRUCTURE  BAPI_CLASS_OBJECTS
    data ZOBJECT_CLASSIFICATION type TABLE OF BAPI_OBJECT_VALUES.
    data ZCLASS_OBJECTS  type TABLE OF BAPI_CLASS_OBJECTS WITH HEADER LINE.
    ZCLASS_OBJECTS-OBJECT_KEY = '000000000000000085'.
    ZCLASS_OBJECTS-OBJECT_TYPE = 'MARA'.
    Append ZCLASS_OBJECTS.
    CALL FUNCTION 'BAPI_CLASS_GET_CLASSIFICATIONS'
      EXPORTING
        CLASSTYPE                    = '001'
        CLASSNUM                     = 'DSWTEST'
    *   KEY_DATE                     = SY-DATUM
    *   LANGU_ISO                    =
    *   LANGU_INT                    =
    *   CHARACTS_OF_CLASS_ONLY       =
    * IMPORTING
    *   RETURN                       =
      TABLES
        OBJECT_CLASSIFICATION        = ZOBJECT_CLASSIFICATION
        CLASS_OBJECTS                = ZCLASS_OBJECTS
    OBJECT_CLASSIFICATION[] = ZOBJECT_CLASSIFICATION[].
    ENDFUNCTION.
    please advise.
    once again if this should be moved to another forum , add the link please!

    Dear,
    I just debugged my Z-function, after adding all input parameters as in the standard BAPI function.
    All parameters seems to be passed correctly except from the table parameters from
    CLASS_OBJECTS
    So all I_parameters are passed :
    {ZBAPI_CLASS_GET_CLASSIFICATION.I_LANGU_INT} = "EN" and
    {ZBAPI_CLASS_GET_CLASSIFICATION.I_LANGU_ISO} = "EN" and
    {ZBAPI_CLASS_GET_CLASSIFICATION.I_KEY_DATE} = Date (2011, 08, 05) and
    {ZBAPI_CLASS_GET_CLASSIFICATION.I_CLASSNUM} = "DSWTEST" and
    {ZBAPI_CLASS_GET_CLASSIFICATION.I_CLASSTYPE} = "001" and
    {ZBAPI_CLASS_GET_CLASSIFICATION.I_CHARACTS_OF_CLASS_ONLY.BAPIFLAG} = ""
    but the table parameters aren't coming through:
    {ZBAPI_CLASS_GET_CLASSIFICATION.T_CLASS_OBJECTS.OBJECT_TYPE} = "MARA" and
    {ZBAPI_CLASS_GET_CLASSIFICATION.T_CLASS_OBJECTS.OBJECT_KEY} = "000000000000000085" and
    these are 'blanco' in the function.
    also after the function is executed and all data is retrieved, when passing the data back to Crystal reports, once again, the table result isn't passed to Crystal Reports.
    please advise

  • Unused stored procedure parameters marked with a check mark in crystal reports

    Post Author: epowers0213
    CA Forum: General
    Hello,
    I have some Crystal Reports that currently use stored procedures as their datasources (I am in the process of modifying them to use datasets instead).  Some of the original reports have check marks next to stored procedure parameters which I cannot find as being used anywhere in the report.  Is this a legitimate possibility? (Some of them do not have check marks, however, so it is not consistent.)
    More Info:  I am using Crystal Reports within Visual Studio 2005.  I have looked through each report in every way I can think of to find if a parameter field is being used anywhere - I have checked all formula fields, the formatting formulas for sections and individual fields, the record and group selection formulas and the grouping and sorting experts, along with any subreports (although some of them have no subreports).
    (I have read on other forums that exporting a report definition file is another way to look for where fields or parameters are being used, but this does not appear possible within Visual Studio 2005.)
    In some cases, I have gone ahead and replaced the stored procedure datasource location with a dataset (generated based on the same stored procedure).  When I do this, Crystal automatically deletes the stored procedure parameters from the report, and I have still been able to run the modified report successfully - at least it looks ok and nothing is complaining.  So is it possible that these parameters were actually not being used anywhere on the report although they were marked with a check mark?
    Any help would be greatly appreciated!  I want to make sure I am not changing the function of these reports somehow without knowing it...
    Thank you!

    Are you referencing another database that Crystal can't see? Also, you can try and copy the SQL to a command object in Crystal to see if it behaves differently there.

  • How to get data from function module in crystal report

    Hi,
    I installed Crystal Reports 2008 and BO SAP Integration kit for CR.
    I connected successfully to SAP system from CR but unable to get the data into Report ...
    But data is present in function module.
    Could you please tell me what may be the reason ...!!
    Thanks
    Raghavendra

    Hi,
    I connected successfully to SAP system from CR but unable to get the data into Report with all the Input parameters and data is present in function module.
    Note: - If we take Start date as input parameter in Crystal report data is coming for single parameter, whereas we take input parameters like Partner function, Region and Customer - we are not getting data. (These fields we created parameters in Crystal report)
    In Function Module IMPORT Parameters are below mentioned and Export parameter is Blank
                                                                                    Start Date (Mandatory field)
                                                                                    Partner Function (Mandatory)
                                                                                    Region
                                                                                    Customer
    Please let us know if required any information.
    Regards,
    Raghavendra

  • CC&B 2.1 with BO XI 3.1 / Crystal Reports 2008

    Hello,
    Has anybody successfully used CC&B 2.1 with a more recent version of Business Objects than the officially supported BO XI R2? We are trying to integrate with BO XI 3.1, following the steps in the CC&B 2.1 installation document. When running a report from CC&B we get errors related to the Java deployment of Crystal Reports Viewer on Tomcat.
    Thanks in advance for any inputs.

    The installed_fixes only reflect the installation of the Application component of fixes. It sounds to me that you should check the following:
    1. Check that you have run all the database upgrade scripts. You should have log files for these
    2. Check the following table in CC&B to see if the database patches have been applied (CI_UT_INSTL, CI_UT_INSTL_DTL)
    3. logon on to the database as the schema owner , usually cisadm to see if you can see the new / amended tables
    4. If all steps above pass, logon to the database as the update user, usually cisuser.
    If you cannot access the table then you may need to run oragensec to create the synonyms for the user, cisread.
    Edited by: Paul Brown on Feb 21, 2012 4:15 PM

  • Function module in crystal reports using tables as input

    We had a function module created with a few import parameters. We successfully linked it in crystal and were able to retrieve the data.
    To accommodate the requirement of being able to pick multiple values for some of the parameters, the import parameters were changed to tables. When testing in ECC, we are able to retrieve the data using the function module.
    However, when we're using the same approach as before in crystal reports, we are not able to retrieve the data.
    Is it possible in crystal to pass the input parameters to tables ?
    Any ideas what I might be doing wrong?
    Thanks,
    Mat

    Hi John,
    The solution is very simple. 
    You create a function module in ECC (t-code SE37) that will receive you input parameters, process them, and export a table with your results.
    In the function module you define an input parameter using a CHAR120 data type (ex. PERNR).
    In the function module source code you add logic to split the input parameter
    [SPLIT i_PERNR AT ',' INTO TABLE itab_PERNRS.]
    You then create a crystal report against your function module.
    In your crystal report you create a parameter using type "string" (ex. I_PERNR).
    When you execute the crystal report, you input a comma delimited string in the parameter.
    [00001234,00005678,00009123]
    The function module will receive the string of values, split the string to an internal table, and process accordingly.
    I still have no solution for the 120 character restriction in the CR->ECC interface.  In the meantime, I get around this by creating multiple parameters (PERNR1, PERNR2, PERNR3, etc.). 
    Each parameter is set up to pass a string of 120 characters to ECC.
    The function module is set up to concatenate the parameters before splitting.
    [CONCATENATE PERNR1 PERNR2 PERNR3 into I_PERNR]
    Hope this helps.

  • User Function Library for Crystal Reports 10 doesn't work on Win2K3 SP2

    Hi,
    Recently, we have been facing problem with Crystal Reports 10 developer edition on Windows Server 2003 R2 Service Pack2.
    The user function library concept doesnu2019t seem to be working on Windows Server 2003. We had installed CR10 Service Pack 6.
    We have a UFL written in VB 6.0 and this UFL is used in a formula in one of our reports.
    Whenever this report is invoked, the application crashes with a page fault. Dr Watson log files points to a crash occurring in Crystal Reports component.
    To reproduce this problem:
    1) Create a UFL in VB 6.0
    2) Use the UFL in a formula in a report
    3) Create a VB 6.0 application and use CR 10 Report Viewer control
    4) Invoke the report from the application
    5) The application crashes on Windows Server 2003 (SP2).
    This is a high priority issue.
    Is there any other alternative to User Function Library?
    Any help on this will be very much appreciated.
    Thanks in advance.

    Hi,
    Recently, we have been facing problem with Crystal Reports 10 developer edition on Windows Server 2003 R2 Service Pack2.
    The user function library concept doesnu2019t seem to be working on Windows Server 2003. We had installed CR10 Service Pack 6.
    We have a UFL written in VB 6.0 and this UFL is used in a formula in one of our reports.
    Whenever this report is invoked, the application crashes with a page fault. Dr Watson log files points to a crash occurring in Crystal Reports component.
    To reproduce this problem:
    1) Create a UFL in VB 6.0
    2) Use the UFL in a formula in a report
    3) Create a VB 6.0 application and use CR 10 Report Viewer control
    4) Invoke the report from the application
    5) The application crashes on Windows Server 2003 (SP2).
    This is a high priority issue.
    Is there any other alternative to User Function Library?
    Any help on this will be very much appreciated.
    Thanks in advance.

  • Issues with Bex query structures and Crystal Reports/Webi

    Hi experts,
    I'm having an issue with Bex Query structures and nulls. I've built a Crystal Report against a Bex query that uses a Bex Query structure. The structure looks like the following
    Budget $
    Budget %
    Actual $
    Actual %
    Budget YTD
    etc
    if I drag the structure into the Crystal Report detail section with a key figure it displays like this
    Budget $     <null>
    Budget %     <null>
    Actual $     300
    Actual %     85
    Budget YTD     250
    the null values are displayed (and this is what is required). However if I filter using a Record selection or group on a profit centre then the nulls along with the associated structure component are not displayed.
    Actual $     300
    Actual %     85
    Budget YTD     250
    Webi is also behaving similarly. Can anyone explain why the above is happening and suggest a solution either on the Bex side of things or on the Crystal Reports side of things? I'm confused as to why nulls are displayed in the first example and not the second.
    Business Objects Edge 3.1 SP2
    SAP Int Kit SP2
    OS: Linux
    BW 701 Level 6
    Crystal Reports 2008 V1
    Thanks
    Keith

    Hi,
    Crystal Reports and Web Intelligence will only show data which is in the cube. You could have an actual 0 or Null entry whithout grouping but by changing the selection / grouping in the report the data does not include such entry anymore.
    ingo

  • Issues with Infoview data refresh on Crystal Reports based on BW BeX query

    Hi all,
    We applied the Business Objects XI3.1 fix pack 3.1 with Integration toolkit fix pack 3.1 in our environment.
    After that we started having trouble with Crystal Reports based on BeX queries that use manual input variables.
    The data refresh would not work in Infoview.
    The data refresh would work using the Crystal Reports designer gui on local machine.
    regards,
    Abhishek

    Hi all,
    This thread is for the benefit of all the BW/BO people who faced issues with BO reports not working after certain fix pack installations.
    After lot of time spent in debugging this and researching and some help from SAP, we found that BASIS had missed a step in the BO patching. This step was relating to applying some BW transports in the BW system related to the new Integration toolkit.
    Please use below notes for the BW transport task of patching BOE Integration toolkit.
    Refer to Note#1472104 which explains about loading the
    transports when we install BO Service Packs or Fix Packs. Also please refer to the Note#1271751 for the advice on transports for BW systems.
    Please go through page 206 (Configuring transports) in the SAP Integration Kit installation guide. You can download this document at below link.
    https://websmp106.sap-ag.de/~sapidb/011000358700000559912010E/xi31_sp3_bip_sap_inst_en.pdf
    Refer to Note#1345919 which explains about the process of loading transports for SAP IK.
    regards,
    Abhishek

  • Chart from data with two bex queries in crystal reports 4.0 for enterprise

    Hi,
    I'm fairly new to crystal reports and I have a requirement to show the data from 2 bex queries in one single cross table. is it possible ?
    after getting it i should be able to create chart with that data
    Eg: my table would be something like below :
                   calendar day
    Input     : 12      34     50     60
    Output  :  09     23     19     57
    Input Data will be coming from one bex query
    Out put data comes from another bex query
    is it possible to merge the dimensions and then work on ????         
    any help is much appreciated

    Hi Tanveer,
    The only way you can add two BEx queries in a report is using a Subreport. The First BEx query goes in the Main Report and the second one goes in the Subreport.
    You'll not be able to add the dimensions and measures from these two BEx queries in a Crosstab anyway. Perhaps, you could create a mock crosstab and send values (all rows) from the Main Report to the Subreport as a string however, I can see that it's going to get complex.
    -Abhilash

  • Problem with Print functionality in the BI reports integrated into portal

    Hi,
    We have some BI reports integrated into portal.and we have a Print button,which is a standard SAP functionality,doesnot work.When we click that print button it takes forever to load the page and print it.
    Please help me in resolving this issue and points will be rewarded for sure
    Bala

    Hi Edward,
    Can you clarify on your statement "You can run 3.x queries normally". I am currently declaring the bex web application string in the BW iview created in this format "infocube=0D_FI_C01&query=0D_FI_C01_Q001" and i am not defining the report template anywhere in the iview properties but still the standard template is displayed.
    Pls let me know how to run 3.x queries normally.
    Also i am trying to integrate only reports which are developed for BW 3.x format in BI system but still the data is not displayed.
    Pls let me know incase the SP level of both EP and BI portal are to be considered for this.
    EP 7 portal is on SP9 where as BI 7 is on sp12.
    Also i noticed the EP portal doesn't have BI Java Addon. will this matter for displaying reports in BW 3.x format.
    As you suggested workaround i tried to create a url iviews directly taking the links from the reports displayed in BI portal , i was able to preview the report but when i added those iview reports to role, the reports are constantly loading as it is trying to contact BI system. There are being loaded constantly with nothing displayed on screen.
    "http://sapbw:50000/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=0D_PU_C01_Q011&VARIABLE_SCREEN=X&DUMMY=1"
    regards
    Bharat

  • Can not find Function module in Crystal Report Database Connections FN

    Hi,
    we designed a Function Module XX in SE80.
    We set up BO Interagtion for SAP
    We can connect to the R3( CRM) System.
    We can See FN's.
    We can not see our Function Module XX we designed in SE80 in the Database Connection
    What is missing ?
    Any Authorization missing ?
    Which Where
    Thanks
    Martin Sautter

    Yes,
    we just have got it:
    /Database Assistant / Data / My Connections/<myConnection>/FN -> Right Mice Button/ Options ->  Table Name Like: <MYTABLE>
    than
    /Right Mice Button/Regenerate
    Thanks
    Martin

  • Problems with AD Kerberos authentication in Crystal Reports Server 2008

    I have followed the steps in the xi3 admin guide and still get "Account Information Not Recognized: Active Directory Authentication failed to log you on" for any AD user in the CMC and Infoview. The user list has successfully populated from the defined AD groups.
    I have tested with kinit.exe as specified and the command line returns nothing. However if I remove the password from the end of the command line, it prompts me for it and then says a new ticket is stored.
    I have added the debugging lines in the Java tab of Tomcat configuration, and restarted Tomcat, but no verbose log file is created.
    Any suggestions?
    Thanks.
    Edited by: Davomate on Jul 17, 2009 3:54 AM

    Support did a Webex with me and resolved the problem. The kdc entry in the krb5.ini file needed to name the AD server, not just the domain.

Maybe you are looking for