Not able to Access R/3 Tables, Function Modules through Crystal Reports
Hi Gurus,
I am working on Crystal Reports 2008 - V12.2.0, When I am trying to connect SAP R/3 system through the Data connectivity SAP Table,Cluster or FM,
I could see only the very few tables , and cannot see all Tables and not any Info sets or Function Modules,
But, I can access BW system, problem facing only with SAP R/3 system,
Suggest me on this,
Thanks
Siva
Hey here..,,
There is a limitation to show all Tables, Function Modules in Crystal reports for R/3. To see them,
In Options:
You will see Table_Name Like%: Text box, go there and give the starting or ending characters of FM's.
Eg: Z% or %Z
Then Click on Ok.
Now try to connect to R/3 again or Refresh the Connection, it will list out as you opted.
Hope it should help you.
Thank You!!
Similar Messages
-
How to use functional module in crystal report
Hi all,
I have imported my functional module to crystal report,
but when i am previewing it i am not getting data in that, according to my functional module.
how to run my functional module through crystal report.
thanks in advancePost Author: mewdied
CA Forum: .NET
'EXPORT to EMAIL ''' Code for exporting the report to Mapi (.Net Windows application) ''' *For a Web application you must export to disk as a PDF file first.
crReportDocument.Load(Application.StartupPath + "\World Sales Report.rpt") crMicrosoftMailDestinationOptions = New MicrosoftMailDestinationOptions With crMicrosoftMailDestinationOptions .MailCCList = "[email protected]" .MailToList = "[email protected]" .MailSubject = "Attached exported report" .UserName = "admin" .Password = "password" End With
crExportOptions = crReportDocument.ExportOptions With crExportOptions .DestinationOptions = crMicrosoftMailDestinationOptions .ExportDestinationType = ExportDestinationType.MicrosoftMail .ExportFormatType = ExportFormatType.PortableDocFormat End With
'Add some error handling Try crReportDocument.Export() MsgBox("Report exported successfully.") Catch err As Exception MessageBox.Show(err.ToString()) End Try
Hope this helps -
How to get data from function module in crystal report
Hi,
I installed Crystal Reports 2008 and BO SAP Integration kit for CR.
I connected successfully to SAP system from CR but unable to get the data into Report ...
But data is present in function module.
Could you please tell me what may be the reason ...!!
Thanks
RaghavendraHi,
I connected successfully to SAP system from CR but unable to get the data into Report with all the Input parameters and data is present in function module.
Note: - If we take Start date as input parameter in Crystal report data is coming for single parameter, whereas we take input parameters like Partner function, Region and Customer - we are not getting data. (These fields we created parameters in Crystal report)
In Function Module IMPORT Parameters are below mentioned and Export parameter is Blank
Start Date (Mandatory field)
Partner Function (Mandatory)
Region
Customer
Please let us know if required any information.
Regards,
Raghavendra -
Not able to use Commit after the function module STATUS_OBJECT_CREATE
I am using function module STATUS_OBJECT_CREATE
CALL FUNCTION 'STATUS_OBJECT_CREATE'
EXPORTING
CHGKZ = 'X'
CLIENT = SY-MANDT
OBJNR = LV_OBJNR3
OBTYP = 'IWE'
STSMA = 'ZS_RE_01'
IMPORTING
OBJNR = LV_OBJNR3.
STONR = LV_STONR.
IF SY-SUBRC = 0.
COMMIT WORK.
ENDIF.
i am getting error after the COMMIT WORK .
I am not getting any issue in the function module .after the function module i am using the COMMIT WORK and i am getting the following error message
Category ABAP Programming Error
Runtime Errors SAPSQL_ARRAY_INSERT_DUPREC
Except. CX_SY_OPEN_SQL_DB
ABAP Program SAPLBSVU
Application Component CA-GTF-TS-SMT
Date and Time 03/17/2014 07:01:29
|Short text |
| The ABAP/4 Open SQL array insert results in duplicate database records. |
|What happened? |
| Error in the ABAP Application Program |
| |
| The current ABAP program "SAPLBSVU" had to be terminated because it has |
| come across a statement that unfortunately cannot be executed. |
|What can you do? |
| Note down which actions and inputs caused the error. |
| |
| |
| To process the problem further, contact you SAP system |
| administrator. |
| |
| Using Transaction ST22 for ABAP Dump Analysis, you can look |
| at and manage termination messages, and you can also |
| keep them for a long time. |
|Error analysis |
| An exception occurred that is explained in detail below. |
| The exception, which is assigned to class 'CX_SY_OPEN_SQL_DB', was not caught |
| in |
| procedure "STATUS_UPDATE" "(FUNCTION)", nor was it propagated by a RAISING |
| clause. |
| Since the caller of the procedure could not have anticipated that the |
| exception would occur, the current program is terminated. |
| The reason for the exception is: |
| If you use an ABAP/4 Open SQL array insert to insert a record in |
| the database and that record already exists with the same key, |
| this results in a termination. |
| |
| (With an ABAP/4 Open SQL single record insert in the same error |
| situation, processing does not terminate, but SY-SUBRC is set to 4.) |
|How to correct the error |
| Use an ABAP/4 Open SQL array insert only if you are sure that none of |
| the records passed already exists in the database. |
| |
| If the error occures in a non-modified SAP program, you may be able to |
| find an interim solution in an SAP Note. |
| If you have access to SAP Notes, carry out a search with the following |
| keywords: |
| |
| "SAPSQL_ARRAY_INSERT_DUPREC" "CX_SY_OPEN_SQL_DB" |
| "SAPLBSVU" or "LBSVUU01" |
| "STATUS_UPDATE" |
| |
| If you cannot solve the problem yourself and want to send an error |
| notification to SAP, include the following information: |
| |
| 1. The description of the current problem (short dump) |
| |
| To save the description, choose "System->List->Save->Local File |
| (Unconverted)". |
| |
| 2. Corresponding system log |
| |
| Display the system log by calling transaction SM21. |
| Restrict the time interval to 10 minutes before and five minutes |
| after the short dump. Then choose "System->List->Save->Local File |
| (Unconverted)". |
| |
| 3. If the problem occurs in a problem of your own or a modified SAP |
| program: The source code of the program |
| In the editor, choose "Utilities->More |
| Utilities->Upload/Download->Download". |
| |
| 4. Details about the conditions under which the error occurred or which |
| actions and input led to the error. |
| |
| The exception must either be prevented, caught within proedure |
| "STATUS_UPDATE" "(FUNCTION)", or its possible occurrence must be declared in |
| the |
| RAISING clause of the procedure. |
| To prevent the exception, note the following: |
|System environment |
| SAP Release..... 702 |
| SAP Basis Level. 0010 |
| |
| Application server... "sds6ci" |
| Network address...... "11.224.101.53" |
| Operating system..... "Linux" |
| Release.............. "2.6.18-194.el5" |
| Hardware type........ "x86_64" |
| Character length.... 16 Bits |
| Pointer length....... 64 Bits |
| Work process number.. 17 |
| Shortdump setting.... "full" |
| |
| Database server... "gctsdb01lds.hsi.hugh" |
| Database type..... "ORACLE" |
| Database name..... "DS6" |
| Database user ID.. "SAPDS4" |
| |
| Terminal.......... "GCTEMP02VDI" |
| |
| Char.set.... "C" |
| |
| SAP kernel....... 720 |
| created (date)... "Sep 14 2013 05:28:14" |
| create on........ "Linux GNU SLES-9 x86_64 cc4.1.2 use-pr130820" |
| Database version. "OCI_102, 10.2.0.5.0, V2, default" |
| |
| Patch level. 500 |
| Patch text.. " " |
| |
| Database............. "ORACLE 10.1.0.*.*, ORACLE 10.2.0.*.*, ORACLE 11.2.*.*.*" |
| SAP database version. 720 |
| Operating system..... "Linux 2.6, Linux 3" |
| |
| Memory consumption |
| Roll.... 1317248 |
| EM...... 0 |
| Heap.... 0 |
| Page.... 0 |
| MM Used. 1242912 |
| MM Free. 53400 |
|User and Transaction |
| Client.............. 160 |
| User................ "DV018458" |
| Language key........ "E" |
| Transaction......... "SE38 " |
| Transaction ID...... "5323C30FC9364665E10000000BE06533" |
| |
| EPP Whole Context ID.... "002655EE0F241ED3ABB7D81260A28C44" |
| EPP Connection ID....... 00000000000000000000000000000000 |
| EPP Caller Counter...... 0 |
| |
| Program............. "SAPLBSVU" |
| Screen.............. "RSM13000 3000" |
| Screen Line......... 2 |
| Debugger Active..... "none" |
|Information on where terminated |
| Termination occurred in the ABAP program "SAPLBSVU" - in "STATUS_UPDATE". |
| The main program was "RSM13000 ". |
| |
| In the source code you have the termination point in line 60 |
| of the (Include) program "LBSVUU01". |
| The program "SAPLBSVU" was started in the update system. |
| The termination is caused because exception "CX_SY_OPEN_SQL_DB" occurred in |
| procedure "STATUS_UPDATE" "(FUNCTION)", but it was neither handled locally nor |
| declared |
| in the RAISING clause of its signature. |
| |
| The procedure is in program "SAPLBSVU "; its source code begins in line |
| 1 of the (Include program "LBSVUU01 ". |
|Source Code Extract |
|Line |SourceCde |
| 30| LOOP AT jsto_upd WHERE chgkz = 'X'. |
| 31| CHECK: jsto_upd-chgnr > '000', |
| 32| jsto_upd-stsma NE jsto_upd-stsma_old. |
| 33| CLEAR jcdo_tab. |
| 34| MOVE-CORRESPONDING jsto_upd TO jcdo_tab. |
| 35| MOVE-CORRESPONDING chdat TO jcdo_tab. |
| 36| jcdo_tab-stsma_new = jsto_upd-stsma. |
| 37| APPEND jcdo_tab. |
| 38| ENDLOOP. |
| 39|* Änderungen zu Einzelstatus (Insert) |
| 40| LOOP AT jest_ins WHERE chgkz = 'X'. |
| 41| CHECK jest_ins-chgnr > '000'. |
| 42| CLEAR jcds_tab. |
| 43| MOVE-CORRESPONDING jest_ins TO jcds_tab. |
| 44| MOVE-CORRESPONDING chdat TO jcds_tab. |
| 45| jcds_tab-chind = 'I'. |
| 46| APPEND jcds_tab. |
| 47| ENDLOOP. |
| 48|* Änderungen zu Einzelstatus (Update) |
| 49| LOOP AT jest_upd WHERE chgkz = 'X'. |
| 50| CHECK jest_upd-chgnr > '000'. |
| 51| CLEAR jcds_tab. |
| 52| MOVE-CORRESPONDING jest_upd TO jcds_tab. |
| 53| MOVE-CORRESPONDING chdat TO jcds_tab. |
| 54| jcds_tab-chind = 'U'. |
| 55| APPEND jcds_tab. |
| 56| ENDLOOP. |
| 57|* Verbuchung Statusobjekte |
| 58| DESCRIBE TABLE jsto_ins LINES sy-tabix. |
| 59| IF sy-tabix > 0. |
|>>>>>| INSERT jsto CLIENT SPECIFIED |
| 61| FROM TABLE jsto_ins. |
| 62| ENDIF. |
| 63| DESCRIBE TABLE jsto_upd LINES sy-tabix. |
| 64| IF sy-tabix > 0. |
| 65| field-symbols <fs_jsto_line> like jsto_upd. |
| 66| loop at jsto_upd assigning <fs_jsto_line>. |
| 67| IF <fs_jsto_line>-chgnr = '000'. |
| 68| <fs_jsto_line>-chgnr = '999'. |
| 69| ENDIF. |
| 70|* on change of status profile delete user status related to old profile |
| 71| IF <fs_jsto_line>-STSMA NE <fs_jsto_line>-STSMA_OLD. |
| 72| DELETE FROM JEST CLIENT SPECIFIED WHERE |
| 73| MANDT = <fs_jsto_line>-MANDT AND |
| 74| OBJNR = <fs_jsto_line>-OBJNR AND |
| 75| STAT LIKE 'E%'. |
| 76| DELETE FROM JCDS CLIENT SPECIFIED WHERE |
| 77| MANDT = <fs_jsto_line>-MANDT AND |
| 78| OBJNR = <fs_jsto_line>-OBJNR AND |
| 79| STAT LIKE 'E%'. |i tried with out using commmit but it is not creating Status.
When i see the function module help and they are trying to COMMIT
FU STATUS_OBJECT_CREATE
Short Text
Create Status Object
Functionality
The function module generates a status object.
Take the object number from the object number management (function modules OBJECT_NUMNBER_GET_xx).
If no object number is given, the module takes a temporary object number that must be replaced later (function module STATUS_OBJECT_SWITCH_NUMBER).
Example
Creating an internal order with number 100123 (object type "ORC") for status profile "STATSCHEM" with final object number
call function 'OBJECT_NUMBER_GET_OR'
exporting
aufnr = '100123'
importing objnr = objektnummer.
call function 'STATUS_OBJECT_CREATE'
exporting
objnr = objektnummer
obtyp = 'ORC'
stsma = 'STATSCHEM'.
commit work.
Creating the same order with a temporary object number
data: objectkey like ionra.
* TBO00-REFSTRUCT for object type 'OR' is 'IONRA'
objectkey-aufnr = '100123'.
call function 'STATUS_OBJECT_CREATE'
exporting
i_objectkey = objectkey
obtyp = 'ORC'
stsma = 'STATSCHEM'.
importing
objnr = objektnummer.
call function 'OBJECT_NUMBER_GET_OR'
exporting
aufnr = '100123'
importing objnr = objektnummer_neu.
call function 'STATUS_OBJECT_SWITCH_NUMBER'
exporting
objnr_old = objektnummer
objnr_new = objektnummer_neu.
commit work.
Notes -
Function module in crystal reports using tables as input
We had a function module created with a few import parameters. We successfully linked it in crystal and were able to retrieve the data.
To accommodate the requirement of being able to pick multiple values for some of the parameters, the import parameters were changed to tables. When testing in ECC, we are able to retrieve the data using the function module.
However, when we're using the same approach as before in crystal reports, we are not able to retrieve the data.
Is it possible in crystal to pass the input parameters to tables ?
Any ideas what I might be doing wrong?
Thanks,
MatHi John,
The solution is very simple.
You create a function module in ECC (t-code SE37) that will receive you input parameters, process them, and export a table with your results.
In the function module you define an input parameter using a CHAR120 data type (ex. PERNR).
In the function module source code you add logic to split the input parameter
[SPLIT i_PERNR AT ',' INTO TABLE itab_PERNRS.]
You then create a crystal report against your function module.
In your crystal report you create a parameter using type "string" (ex. I_PERNR).
When you execute the crystal report, you input a comma delimited string in the parameter.
[00001234,00005678,00009123]
The function module will receive the string of values, split the string to an internal table, and process accordingly.
I still have no solution for the 120 character restriction in the CR->ECC interface. In the meantime, I get around this by creating multiple parameters (PERNR1, PERNR2, PERNR3, etc.).
Each parameter is set up to pass a string of 120 characters to ECC.
The function module is set up to concatenate the parameters before splitting.
[CONCATENATE PERNR1 PERNR2 PERNR3 into I_PERNR]
Hope this helps. -
Can not find Function module in Crystal Report Database Connections FN
Hi,
we designed a Function Module XX in SE80.
We set up BO Interagtion for SAP
We can connect to the R3( CRM) System.
We can See FN's.
We can not see our Function Module XX we designed in SE80 in the Database Connection
What is missing ?
Any Authorization missing ?
Which Where
Thanks
Martin SautterYes,
we just have got it:
/Database Assistant / Data / My Connections/<myConnection>/FN -> Right Mice Button/ Options -> Table Name Like: <MYTABLE>
than
/Right Mice Button/Regenerate
Thanks
Martin -
Not able to connect to older version of CMS from Crystal report 2008
When i try to open a report kept in platform/Enterprise (XI r2 CMC) from my crystal report it says that "Access denied. you cannot log on to an older version of the CMS."
I need to copy these reports to a differnt box. please advice.
ArkaHi,
As you are in XIR2 Enterprise version so, you can use the Import wizard to import the report.
You can create BIAR file using the Import wizard and then in the destination system use the Import wizard to import the reports from the BIAR file.
You can get more information in the admin guide, from the below site:
http://help.sap.com/
-Noor. -
Not able to access the result set from one member function to another
Im new to jdbc
I have declared a connection object , a result set object and statement object in one member function and i am not able to access these in another member function. But both are in the same class
Kindly help
Thanks
ShasiKindly refrain from double-posting:
http://forum.java.sun.com/thread.jspa?threadID=700659&tstart=0
- Saish -
I am not able to access the "featured" and "top charts" in the app store
I am not able to access the "featured" and "top charts" icons in the app store. Everything else works fine.
Here I am using Java Type IV for database
connection.
So,there was no necessity of creating DNS.How your app communicates with db shouldn't matter for the end user. Still, you may want to use a functional network name also for the thin client driver connection string.
So,is there any other way to solve this problem.What is the problem really? Do you not use dns for network naming? Maybe you have to manage the hosts file on every client then. -
SQL2005 on winserver 2003. I have a view in Xdb that accesses tables in 2 different databases (Xdb and Ydb) on the same server. I have mixed mode security. I have a SQL user (XYuser) that has read access to all tables and views on both databases, yet when I try to access the view using a C# windows application I get the following error:
The server principal "XYuser" is not able to access the database "Ydb" under the current security context
This same scenario works under SQL 2000. I looked through the postings and tried to set TRUSTWORTHY ON on both databases but that didn't help. I can access any other views or tables on the SQL 2005 server, just not the one that joins the tables cross databases. Any help is much appreciated... johnThis appears to be a Login/Database Mapping issue. I was having this problem, but was able to resolve it as follows:
Using the SQL Server management Studio:
In the Object explorer, under the SERVER security folder (not the database security folder), expand Logins.
That is: ServerName -> Security -> Logins
NOT: ServerName -> Databases -> DatabaseName -> Security -> Users
Select the Login that is having the troubles. Right click on the Login and select ‘Properties.’
The ‘User Mapping’ page should list all databases on the server with a check mark on the databases that the Login has been mapped to. When I was getting the error, the database in question was not checked (even though the Login was assigned as a User on the database itself). Map the Login by checking the box next to the database name. Set the default schema. Then select the roles for the Login in the Database role membership list box. I selected db_datareader and public. After clicking OK to save the changes, the problem was resolved.
In order to ‘Map’ the Login, the Login must not already be as User on the database, so you may have to go to the database security (ServerName -> Databases -> DatabaseName -> Security -> Users) and delete the Login from the list of database Users before mapping the Login to the database. -
When I added a contact to my contacts, took a picture and added Ringtone, pressed done, the screen went black and I am not able to access contacts. I turned off the ipad but still cannot access contacts.
I don't fully understand what the System Reset does but I've found that it cures many ills. It's easy, quick and harmless:
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears.
A System Reset does not remove any apps, music, movies, etc. nor does it cause any settings to revert back to default.
Also, you might wish to download the iPad-2 User Guide. Pay special attention to page 162. Note that this Guide also applies to the iPad-1 with IOS 4.3 except for those functions that are not supported by the hardware.
http://support.apple.com/manuals/#ipad
Finally, the User Guide can be downloaded at no charge via iBooks and a less comprehensive version of the Guide is included as a Safari bookmark. -
APEX application not able to access
Hi all,
I am new in APEX.
and I have to create the same environment as the client have.
client only given me sql for importing the application developed in APEX.
I created workspace and imported the application in that. but the client is using the active directory authentication and now when i am trying to run the application at my environment then i am not able to access the application.
So could any one of you please guide me what i need to do with the APEX to login to the application with my active directory authentications.
this is somehow urgent and i am not able to get any help. so could anyone guide me.
Sanket
Edited by: user10528895 on Oct 28, 2010 10:46 PMHi ajinkya,
Thanks for forwording the helping hand.
but can able to mannage and found some documentas of configuration of LDAP and using the LDAP authentication at my own. and now i configured the LDAP and able to access the application.
now the next step i am stuch is the authentication is of 2 layer 1 i passed but next is there are some of the authorizations schems created and assigned to the specific users.
now if i want to get the information of the authentications schems and where the data store then from where i get the information that is my question
i am using database version 10g 10.2.0 and apex 3.0.1
Regards,
Sanket -
Sharepoint 2010 - Not able to access Sharepoint 2010 Public facing site on mobile browsers
Hi All,
Earlier, I posted a similar question in the forum , but did not get appropriate response . Posting it again with some more information .
We are not able to access Sharepoint public facing site on Mobile browsers like chrome, IE, Safari (However the site is working fine on Firefox mobile browser and on PC/Laptops as well .)
Following is the error we are getting :
"Cannot set custom attribute on mobile controls in this page. Custom attributes specified are Access Key=0."
I checked in the event logs , following was the exception :
Exception captured in Exception HttpModule: System.Web.HttpException: Server cannot append header after HTTP headers have been sent.
at System.Web.HttpResponse.set_RedirectLocation(String value)
at Microsoft.SharePoint.Utilities.SPMobileUtility.Redirect(String url, SPRedirectFlags flags, HttpContext context, String queryStrings)
at Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.HandleMobilePageRequest(HttpContext context)
at Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.PostResolveRequestCacheHandler(Object oSender, EventArgs ea)
at System.Web.HttpApplication.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
Also, there was a microsoft OS security patching on our farm servers post which the error starts coming . Following were the patches that were installed
1. MS14-005
KB2916036 Security Update for Windows Server 2008 R2 x64
Edition (KB2916036)
MS14-009
KB2898857 Security Update for Microsoft .NET Framework 3.5.1
2. on Windows 7 and Windows Server 2008 R2 SP1 for x64-based Systems
(KB2898857)
3. MS14-009
KB2901112 Security Update for Microsoft .NET Framework 3.5.1
on Windows 7 and Windows Server 2008 R2 SP1 for x64-based Systems
(KB2901112)
4. MS14-009
KB2911501 Security Update for Microsoft .NET Framework 3.5.1
on Windows 7 and Windows Server 2008 R2 SP1 for x64-based Systems
(KB2911501)
5. MS14-011
KB2909210 Security Update for Windows Server 2008 R2 x64
Edition (KB2909210)
6. MS14-012
KB2925418 Cumulative Security Update for Internet Explorer 8
for Windows Server 2008 R2 x64 Edition (KB2925418)
7. MS14-015
KB2930275 Security Update for Windows Server 2008 R2 x64
Edition (KB2930275)
8. MS14-016
KB2923392 Security Update for Windows Server 2008 R2 x64
Edition (KB2923392)
Has anyone of you ever faced similar(site not opening on mobile browsers) issue after installing these patches on farm servers .
Any help would be much appreciated .
Thanks
Saquib KhanWe have found below error related in ULS as well as event viewer both :
Exception captured in Exception HttpModule: System.Web.HttpException: Server cannot append header after HTTP headers have been sent.
at System.Web.HttpResponse.set_RedirectLocation(String value)
at Microsoft.SharePoint.Utilities.SPMobileUtility.Redirect(String url, SPRedirectFlags flags, HttpContext context, String
queryStrings)
at Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.HandleMobilePageRequest(HttpContext context)
at Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.PostResolveRequestCacheHandler(Object oSender, EventArgs ea)
at System.Web.HttpApplication.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
Saquib Khan -
User has contribute access but he is not able to access the site collection...
User has contribute access but he is not able to access the site collection...
What error does he get.
Can you share fiddler trace(check if any 404 error)
what error do we see in ULS Logs
Create disableloopback
registry on server
http://support.microsoft.com/kb/926642/en-us -
Not able to access blackberry world on Z10. what could be the reason?
not able to access blackberry world on Z10. what could be the reason? It wasn't issue earlier but facing it from last two days.
Please guys read other forums on this community before posting redundant issues.
Try this fix
Go to the games app.
At the bottom tap on games.
At the right bottom, you will notice three dots. Tap the dots
Tap the option to enter the blackberry world. Wait until the screen is loaded
Swipe right to Enter My World - > My Apps and Games.
Tap the three dots again to check for updates.
Update all the apps and close your App World.
Try accessing the app world in the standard way. Everything mus be fixed by now.
Twitter: @ukmight
1. Click on the " Like " button if you find anything helpful posted.
2. If any of the replies in your post has resolved your problem, mark the reply(ies) as " Solution ", so that others can readily view the solution instead of creating another redundant post.
Maybe you are looking for
-
What is the best Report Category for the selection fields personnel no, personnel area, personnel subarea, employee group, employee subgroup, organizational unit? Thanks Vicky
-
Authority Objects to read HR FM BAPI_ORGUNITEXT_DATA_GET
Hello gurus, i want to run only FM BAPI_ORGUNITEXT_DATA_GET through a SAP User ID, i assigned some Authority Objects to it but its not returining anything if i run it through other user using same parameters its showing me the data. i assigned S_
-
Always plugged in- Battery life
Hi what will be the effect on my battery if its always plugged in to the charger. I am using my MBP more or less like a desktop these days. charging , removing & again putting the charging lead is frustrating & sometimes i just forget to take the lea
-
Failed to load jsp with jstl 1.0 when deployed to Weblogic 11g
The same war is successfully run on weblogic 10.X but failed to run on weblogic 11.x JSTL version is 1.0 Compilation of JSP File failed: Exception occurred while processing '/u02/tech/product/otm620/otmapp/weblogic/domains/otm/servers/gc3-scdemo/tmp/
-
How to make the delivery cost changeable after cancellation of GR?
Create a PO (with Delivery cost), then GR (101) , then cancel the GR (102), but the delivery cost still cannot be modified eventhough the GR has been cancelled - how to make the delivery cost changeable after cancellation of GR?