Automatic sleep broken after 10.5.7 update

Hello,
Since I updated my 10.5.6 system to 10.5.7, the automatic sleep function doesn't work anymore. Screen goes black but harddisk keeps running (little light doesn't pulse).
I tried to repair permissions, reset SMC like described elsewhere in the forum, without any success.
Finally, I reinstalled 10.5 using the "Archive and install" option. Then applied the 10.5.6 combo update. And automatic sleep worked again.
After a few days, with the coming of Safari 4.0 final version (which only work with 10.5.7...), I decided to give it a try and applied the 10.5.7 combo update.
And guess what...
Automatic sleep is broken again...
If anybody has a solution, I would be happy to read it.
Thanks in advance

Some clues point to my external LaCie DVD±RW DL...
As long as it is connected to my MacBook, automatic sleep doesn't work. A green light is flashing at regular intervals, which indicate some sort of activity that could prevent the MacBook to sleep automatically.
To confirm this, I disconnected the external burner and... automatic sleep was working again. I checked the availables updates on LaCie website, but it seems that my burner's firmware is up to date.
I've sent a support request to LaCie, hoping they could do something about it.

Similar Messages

  • MacBook Pro with Retina 13" Late 2013 thunderbolt port broken after 10.9.4 update

    One of Thunderbolt Port (near USB port) was broken after 10.9.4 update.
    I usually use mini Display Port to Display Port cable to connect my external screen, it works fine before 10.9.4 update. After 10.9.4 update, I tried to connect the external screen with the same cable, and the main screen of my MacBook Pro with Retina Display twinkling once so I'm sure the external screen was identified, but no video signal output.
    I went to local Apple Premium Reseller (there is no Apple Store in Taiwan) and the they told me all of Thunderbolt Port was fine, they test with their own 10.9.2 copy and it seems ok. After that, I tried to re-install 10.9.4, downloading directly from Apple, the system re-install progress was complete but the Thunderbolt Port issue still there.
    I connect to the broken Thunderbolt Port with Thunderbolt to Ethernet adapter, and it works fine, so I believe the only problem is that there is no video signal output from the Thunderbolt Port (near USB port one).
    What should I do now?
    Model: MacBook Pro with Retina 13" Late 2013

    I can confirm that problem, too: Im' working with a Dell U2713HM display, connected via display port. Since 10.9.4 Update i'm experiencing random black screens and/or display going to energy saving mode. Today i've had this issue twice: Display going black and after disconnecting the macbook von all cables screen of the macbook remaining black. Holding Power Button for about 10 s restarts the macbook. After 5 minutes the same problem appeared again.

  • Sleep problems after 10.9.4 update

    After Mavericks Update 10.9.4 sleep mode are not working properly.
    My Mac Pro goes to sleep but after a amount of time (sometimes minutes, sometimes seconds)
    the Mac awakes with black screen (monitors in sleep, the mac not). Pressing mouse or keyboard button awakes my monitors.
    I haven't had this behaviour in the Dev.-Previews of 10.9.4 nor in earlier releases !
    Reseting the NVRAM/PRAM doesn't solve my problems.
    My System:
    MacPro5,1
    Xenon 3.00 GHz Quad-Core
    48GB DDR3 ECC RAM (4x 16GB)
    Apple GeForce GT120 512MB (Slot 1) with Monitor #2 on HDMI
    EVGA GeForce GTX580 Classified 3GB (Slot 2) with Monitor #1 on HDMI (plus extra internal PSU in DVD-Tray)
    AirPort Extreme incl. BT
    Mighty Mouse USB + Magic Mouse BT + Alu Keyboard USB
    OS X Mavericks 10.9.4
    Thanks and sorry for my bad english
    Cheers,
    Kay

    Reseting the NVRAM/PRAM doesn't solve my problems.
    Hi, since you have performed NVRAM /PRAM reset, try:
    Intel-based Macs: Resetting the System Management Controller (SMC)
    and if still issues persist,  try: OS X: What is Safe Boot, Safe Mode?  
    Cheers

  • Sleep Mode after 10.5.2 update

    Hi all... my machine won't wake from sleep mode after the 10.5.2 update. I can hear the fan and drives spinning but nothing else happens... forced to cold boot. Also- the screen saver now comes on even though I have it set to "Never" in system prefs. Wierd.
    I welcome any and all thoughts/advice.
    Thanks.

    But the problem of waking from sleep mode persists.
    what third party hardware do you have attached to Mac/ usb hub can cause problem especially with devices attached during sleep. PCI internal cards. Disconnect all except Apple mouse/keyboard and go after one by one.
    I recently dumped a Belkin 7 port usb hub which worked fine in 10.4.11 and up thru 10.5.1 but when 10.5.2 came around it did not wake any device attached. I since move to a Cyberpower usb hub.

  • DVD export broken after 10.0.1 update

    A project which I have previously exported to DVD in Final Cut Pro 10.0 can no longer be exported after 10.0.1 update.
    The symptom is that, athough it plays back fine in the Viewer, after doing Share -> DVD, the burned DVD ends up with these choppy sections where it loops the same 0.3 seconds or so over and over. This occurs after about 4 minutes of playback (it is an 8 minute video).
    I've burned multiple DVDs, and deleted the projects render files and re-rendered, and tried multiple DVD players, all to no avail.
    This is my first attempt to burn a DVD since applying the update from App Store, which is why I surmise the update may be involved.
    Visually it looks a lot like a disc with a bad scratch where it gets in a loop. But as far as I can tell, Final Cut Pro is actually burning the DVD fine, and it is actually writing the same 0.3 second of video over and over. That is, if I put it into a DVD player, I can fast forward from 03:00 to 07:00, and it is still looping the same snippet of video.
    Has anybody seen this problem? Any advice for how to fix. Thanks.

    This may or may not be related, but its worth mentioning as it relates to what may be a change in the update. I did a test export "Share" > "DVD..." on a project. It worked very well. DVD played just fine on a few devices.
    Same project after the update and it fails to share a DVD now. It opens the Share Monitor app and after a few seconds FCPX shows me this:
    First, lets take a moment to appreciate the inherent humor in FCPX telling me I've failed. Funny. Moving on...
    Restarted FCPX - no change.
    Deleted "Shared Items" folder, in my FCP Project folder - no change.
    Restarted Lion - no change.
    Realization iLife in Lion no longer comes with iDVD - not happy.
    Any advice?

  • Remote desktop broken after 10.9.3 update

    After the 10.9.3 update, remote desktop is completely broken...
    The ard status monitor display : Apple Remote Desktop is disabled. I try a clean install (app + system library coreservice remote management + user library pref ans aap support deleted.
    After the Remote Desktop 3.7.2 installed from the Apple Store when i try to launch the application i get this message : The remote desktop client does not mach the administrator software version. Check for update.
    And this is the problem : there is no updates available !!!!
    I have try to install some 3.7.1 client from some dmg, but all false : ARD agent validate multiple error ( on log) error 6405, fatal error 5, error 100, error 6404, broken pipe, fatal error 0
    Now i am back to the clean uninstall and with the new Remote Desktop 3.7.2 with the desktop client not matching and not running...and without any update available.
    thanks for help !

    Nice idea and helping really !!!!
    On safe mode, i could install an old remote desktop client (3.6.x) - and the client works fine as client.
    Next i get the last Remote Desktop Admin from the Apple Store and it run also always in safe mode. No error, but all my setting were lost. With the Remote Desktop Admin running i created a new client installer and quit the Admin app for updating the client to the last release (3.7.1). I test all in safe mode (running as admin and as client) and finally reboot the computer to quit the safe mode.. and finally all was running again.
    I don't know why during the 10.9.3 update Remote Desktop was corrupted...
    Now i need to put back my remote client, but this not really a problem.
    Thank a lot th Deadzak for his genius intuition.

  • Sleep problems after 10.7.5 Update

    Hi - After updating to 10.7.5 I have found my sleepwatcher sleep script which runs osascript times out with a PM Timeout.
    Does anyone else have this problem?
    Have Apple changed what happens on Sleep - for example disabling osascript or killing other processes or changing the order of what happens?
    Thanks
    Terry

    It appears that this is not an uncommon problem:
    https://discussions.apple.com/thread/3864270?start=45&tstart=0
    (In my case it was a file permission problem.)

  • Xperia z1 broken after April 18th sony update

    After an automatic update from Sony yesterday morning my Xperia Z1 is losing power 1% each 2 minutes and when charging - charging slower than battery draining.
    I haven't changed anything but installed the Sony software update (available in sony update cener on the phone, not via PC).
    Then the device started eating battery and is constantly hot. Media server shows over 40% of battery usage.
    II tried fixing the software with Sony PC companion but after restoring it - it is the same system version and the same problem with media server easting over 40% of the battery. 
    I am uanble to use a device I paid 700 EUR for! Sony destroyed it and is not answering any Support e-mails for over 15 hours!
    I don't want to lose warranty I need oryginal Sony support. ANyone can help? I found a lot of threads with comparable problem but NO ORIGINAL SONY SOLUTION!
    It would be best If it was possible to downgrade the system to previous version (from before April 18th)

    Could you try to repair with SUS?
    http://www.sonymobile.com/gb/tools/update-service/
    All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

  • Quicktime X broken after security and Safari updates.

    Ran software update yesterday and updated Safari to 5.1.1 and got the latest security update. Now Quicktime X is broken. Still have the app but the icon is missing and it won't start. My old QT 7 still seems to work fine. Tried repairing permissions and restarting several times. Any other ideas? Wish they would just allow us to download and install QT X...

    Sorry to say but this did not work for me. I was able to find an installation of QTP 7.6.4 (which still has the Quicktime Preferences menu option). However, I was not able to install the older version of QTP even after trashing QTP app, and its associated preference files and rebooting my MacBook Pro. The installation program displayed a message that a new version of Quicktime was detected and would not allow me to continue the installation of the previous version. I then found a program called Pacifist http://www.charlessoft.com/ that allowed me to do the installation.
    My reference movies are now behaving as they should. Unquestionably there is a problem with Quicktime Player 7.6.6 which Apple really should address right away.
    BTW, after doing this, my Pro key seems to be intact. I just purchase Final Cut Studio upgrade. I guess I leave QT 7.6.4 and ignore software updates fopr Quicktime until I see 7.6.8.
    Unfortunately, I'll have a difficult time explaining this to my clients. In effect, this screw up by Apple makes it inadvisable for me to provide reference movies with alternates for my clients.

  • Bonjour broken after 10.8.5 update

    I have a home network consisting of 4 Macs. 3 are running the latest version of 10.6. The fourth computer, a MacBookPro 4,1 (early 2008) is running 10.8. After installing the 10.8.5 update on the MacBook Pro, I'm now unable to connect to the other computers on the network via Bonjour, or to see/print to any shared printers. None of the other computers have any trouble seeing one another or printing, the MBP alone seems to be the issue. I can ping other machines from the MBP, and Remote Desktop works.
    I've tried switching wifi on/off, rebooting, deleting the network location and recreating it from scratch, and flushing the cache using dscacheutil, all without success. I'm able to see the shared computers in the sidebar in the Finder, but if I click on them the connection times out.

    Bomjour is mDNSResponder. They're one and the same.
    Please read this whole message before doing anything.
    I've tested these instructions only with the Safari web browser. If you use another browser, they may not work as described.
    This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac. 
    These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing. 
    Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects. 
    Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands. 
    Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply. 
    Launch the Terminal application in any of the following ways: 
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.) 
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens. 
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid. 
    When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign. 
    Step 1 
    Triple-click the line of text below on this page to select it:
    kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}' | open -ef 
    Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). A TextEdit window will open with the output of the command. If the command produced no output, the window will be empty. Post the contents of the TextEdit window (not the Terminal window), if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
    Step 2 
    Repeat with this line:
    { sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|cups|isc|ntp|postf|x)/{print $3}'; echo; sudo defaults read com.apple.loginwindow LoginHook; echo; sudo crontab -l; } 2> /dev/null | open -ef 
    This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. 
    Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step. 
    Step 3
    { launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)/{print $3}'; echo; crontab -l 2> /dev/null; } | open -ef 
    Step 4
    ls -A /e*/{cr,la,mach}* {,/}Lib*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts .la* 2> /dev/null | open -ef  
    Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting. 
    Step 5
    osascript -e 'tell application "System Events" to get name of login items' | open -ef 
    Remember, steps 1-5 are all copy-and-paste — no typing, except your password. Also remember to post the output. 
    You can then quit Terminal.

  • Screen Black after waking from sleep mode (after 10.4.11 update)

    This issue has happened before with an earlier update (10.3.8 Delta fixed the issue originally), and I suspect it is the same with this current update.
    Has anyone else had this problem with the new update and has there been a patch released to fix the problem yet? Hopefully we can get an update soon.

    This happens every so often to my 12" Aluminium PowerBook after sleeping (black screen, hard drive spinning away) and after trying every possible key combination and nothing helping, I'm usually left with the usual last resort, which is a hard restart. Of course that remedies the problem short term but unfortunately, only until the next time it happens. For me, it has been an issue since I bought it and is not affected by the OS.
    I am wondering if it has anything to do with the clasp not working properly when the lid is closed. Sometimes I get the sleeping light, sometimes not - unless I play with the lid until it clicks shut. Then the light appears. Importantly, when the sleeping light appears, the machine always wakes properly with the lid opening. But I have noticed that when the light does not come on and I haven't bothered to shut it down properly, that is when the problem occurs. Which makes me wonder if rather than going into sleep mode it is actually going into hibernation mode due to non use? I haven't a clue but perhaps someone here knows far more about such things than myself?

  • IChat Server broken after 10.6.3 Update

    Jabberd is unable tostart after the update. Any ideas?
    +Mar 30 19:32:38 rudi jabberd/sm[41756]: module 'presence' added to chain 'in-sess' (order 11 index 12 seq 0)+
    +Mar 30 19:32:38 rudi jabberd/sm[41756]: module 'deliver' added to chain 'in-sess' (order 12 index 13 seq 0)+
    +Mar 30 19:32:38 rudi jabberd/sm[41756]: module 'session' added to chain 'in-router' (order 0 index 14 seq 0)+
    +Mar 30 19:32:38 rudi jabberd/sm[41756]: module 'validate' added to chain 'in-router' (order 1 index 1 seq 1)+
    +Mar 30 19:32:38 rudi jabberd/sm[41756]: module 'presence' added to chain 'in-router' (order 2 index 12 seq 1)+
    +Mar 30 19:32:38 rudi jabberd/sm[41756]: module 'privacy' added to chain 'in-router' (order 3 index 2 seq 1)+
    +Mar 30 19:32:38 rudi jabberd/sm[41756]: module 'privacy' added to chain 'out-router' (order 0 index 2 seq 2)+
    +Mar 30 19:32:38 rudi jabberd/sm[41756]: module 'iq-last' added to chain 'pkt-sm' (order 0 index 0 seq 1)+
    +Mar 30 19:32:38 rudi jabberd/sm[41756]: module 'iq-ping' added to chain 'pkt-sm' (order 1 index 6 seq 1)+
    +Mar 30 19:32:38 rudi jabberd/sm[41756]: module 'iq-time' added to chain 'pkt-sm' (order 2 index 15 seq 0)+
    +Mar 30 19:32:38 rudi jabberd/sm[41756]: module 'iq-version' added to chain 'pkt-sm' (order 3 index 16 seq 0)+
    +Mar 30 19:32:38 rudi jabberd/sm[41756]: module 'amp' added to chain 'pkt-sm' (order 4 index 9 seq 1)+
    +Mar 30 19:32:38 rudi jabberd/sm[41756]: module 'disco' added to chain 'pkt-sm' (order 5 index 8 seq 1)+
    +Mar 30 19:32:38 rudi jabberd/sm[41756]: module 'announce' added to chain 'pkt-sm' (order 6 index 11 seq 1)+
    +Mar 30 19:32:38 rudi jabberd/sm[41756]: module 'help' added to chain 'pkt-sm' (order 7 index 17 seq 0)+
    +Mar 30 19:32:38 rudi jabberd/sm[41756]: module 'echo' added to chain 'pkt-sm' (order 8 index 18 seq 0)+
    +Mar 30 19:32:38 rudi jabberd/sm[41756]: module 'roster' added to chain 'pkt-user' (order 0 index 3 seq 1)+
    +Mar 30 19:32:38 rudi jabberd/sm[41756]: module 'presence' added to chain 'pkt-user' (order 1 index 12 seq 2)+
    +Mar 30 19:32:38 rudi jabberd/sm[41756]: module 'iq-vcard' added to chain 'pkt-user' (order 2 index 5 seq 1)+
    +Mar 30 19:32:38 rudi jabberd/sm[41756]: module 'amp' added to chain 'pkt-user' (order 3 index 9 seq 2)+
    +Mar 30 19:32:38 rudi jabberd/sm[41756]: module 'deliver' added to chain 'pkt-user' (order 4 index 13 seq 1)+
    +Mar 30 19:32:38 rudi jabberd/sm[41756]: module 'vacation' added to chain 'pkt-user' (order 5 index 4 seq 1)+
    +Mar 30 19:32:38 rudi jabberd/sm[41756]: module 'offline' added to chain 'pkt-user' (order 6 index 10 seq 1)+
    +Mar 30 19:32:38 rudi jabberd/sm[41756]: module 'disco-publish' added to chain 'pkt-user' (order 7 index 19 seq 0)+
    +Mar 30 19:32:38 rudi jabberd/sm[41756]: module 'iq-last' added to chain 'pkt-user' (order 8 index 0 seq 2)+
    +Mar 30 19:32:38 rudi jabberd/sm[41756]: module 'session' added to chain 'pkt-router' (order 0 index 14 seq 1)+
    +Mar 30 19:32:38 rudi jabberd/sm[41756]: module 'disco' added to chain 'pkt-router' (order 1 index 8 seq 2)+
    +Mar 30 19:32:38 rudi jabberd/sm[41756]: module 'active' added to chain 'user-load' (order 0 index 20 seq 0)+
    +Mar 30 19:32:38 rudi jabberd/sm[41756]: module 'roster' added to chain 'user-load' (order 1 index 3 seq 2)+
    +Mar 30 19:32:38 rudi jabberd/sm[41756]: module 'roster-publish' added to chain 'user-load' (order 2 index 21 seq 0)+
    +Mar 30 19:32:38 rudi jabberd/sm[41756]: module 'privacy' added to chain 'user-load' (order 3 index 2 seq 3)+
    +Mar 30 19:32:38 rudi jabberd/sm[41756]: module 'disco-publish' added to chain 'user-load' (order 4 index 19 seq 1)+
    +Mar 30 19:32:38 rudi jabberd/sm[41756]: module 'vacation' added to chain 'user-load' (order 5 index 4 seq 2)+
    +Mar 30 19:32:38 rudi jabberd/sm[41756]: module 'active' added to chain 'user-create' (order 0 index 20 seq 1)+
    +Mar 30 19:32:38 rudi jabberd/sm[41756]: module 'template-roster' added to chain 'user-create' (order 1 index 22 seq 0)+
    +Mar 30 19:32:38 rudi jabberd/sm[41756]: module 'active' added to chain 'user-delete' (order 0 index 20 seq 2)+
    +Mar 30 19:32:38 rudi jabberd/sm[41756]: module 'announce' added to chain 'user-delete' (order 1 index 11 seq 2)+
    +Mar 30 19:32:38 rudi jabberd/sm[41756]: module 'disco-publish' added to chain 'user-delete' (order 2 index 19 seq 2)+
    +Mar 30 19:32:38 rudi jabberd/sm[41756]: module 'offline' added to chain 'user-delete' (order 3 index 10 seq 2)+
    +Mar 30 19:32:38 rudi jabberd/sm[41756]: module 'privacy' added to chain 'user-delete' (order 4 index 2 seq 4)+
    +Mar 30 19:32:38 rudi jabberd/sm[41756]: module 'roster' added to chain 'user-delete' (order 5 index 3 seq 3)+
    +Mar 30 19:32:38 rudi jabberd/sm[41756]: module 'vacation' added to chain 'user-delete' (order 6 index 4 seq 3)+
    +Mar 30 19:32:38 rudi jabberd/sm[41756]: module 'iq-last' added to chain 'user-delete' (order 7 index 0 seq 3)+
    +Mar 30 19:32:38 rudi jabberd/sm[41756]: module 'iq-private' added to chain 'user-delete' (order 8 index 7 seq 1)+
    +Mar 30 19:32:38 rudi jabberd/sm[41756]: module 'iq-vcard' added to chain 'user-delete' (order 9 index 5 seq 2)+
    +Mar 30 19:32:38 rudi jabberd/sm[41756]: version: jabberd sm 2.1.24.1-326.5+
    +Mar 30 19:32:38 rudi jabberd/sm[41756]: attempting connection to router at 127.0.0.1, port=5347+
    +Mar 30 19:32:38 rudi jabberd/sm[41756]: shutting down+
    +Mar 30 19:32:38 rudi org.jabber.jabberd[41754]: ERROR: router died. Shutting down server.+
    +Mar 30 19:32:38 rudi com.apple.launchd[1] (org.jabber.jabberd): Throttling respawn: Will start in 10 seconds+
    +Mar 30 19:32:48 rudi servermgrd[82]: servermgr_jabber[E]: Error -- jabberd service failed to start+
    +Mar 30 19:32:48 rudi servermgrd[82]: servermgr_jabber[W]: some jabberd processes failed to start+
    +Mar 30 19:32:48 rudi servermgrd[82]: servermgr_jabber[N]: waiting for jabberd to finish shutdown...+
    +Mar 30 19:32:48 rudi servermgrd[82]: servermgr_jabber[N]: jabberd service shutdown completed.+
    +Mar 30 19:32:48 rudi servermgrd[82]: servermgr_jabber[E]: Error -- failed to start service: jabberd+

    I'm sorry, the copied Log doesn't reflect the Problem, here we go again.... So why is jabberd connecting to localhost again? I can't get this to work right now...
    Thanks in advance,
    Thomas
    +Mar 30 19:41:02 rudi jabberd/c2s[42096]: starting up+
    +Mar 30 19:41:02 rudi jabberd/c2s[42096]: modules search path: /var/jabberd/modules/jabberd2+
    +Mar 30 19:41:02 rudi jabberd/c2s[42096]: initialized auth module 'sqlite'+
    +Mar 30 19:41:02 rudi jabberd/sm[42094]: attempting connection to router at 127.0.0.1, port=5347+
    +Mar 30 19:41:02 rudi jabberd/sm[42094]: shutting down+
    +Mar 30 19:41:02 rudi jabberd/s2s[42098]: starting up (interval=60, queue=60, keepalive=0, idle=86400)+
    +Mar 30 19:41:02 rudi jabberd/c2s[42096]: [domainname] configured; realm=domainname, registration disabled+
    +Mar 30 19:41:02 rudi jabberd/c2s[42096]: attempting connection to router at 127.0.0.1, port=5347+
    +Mar 30 19:41:02 rudi jabberd/c2s[42096]: shutting down+
    +Mar 30 19:41:02 rudi jabberd/s2s[42098]: attempting connection to router at 127.0.0.1, port=5347+
    +Mar 30 19:41:02 rudi jabberd/s2s[42098]: [4] [router] write error: Broken pipe (32)+
    +Mar 30 19:41:02 rudi jabberd/s2s[42098]: connection to router closed+
    +Mar 30 19:41:02 rudi jabberd/s2s[42098]: attempting reconnect (3 left)+
    +Mar 30 19:41:04 rudi jabberd/resolver[42093]: attempting connection to router at 127.0.0.1, port=5347+
    +Mar 30 19:41:04 rudi jabberd/resolver[42093]: shutting down+
    +Mar 30 19:41:04 rudi jabberd/s2s[42098]: attempting connection to router at 127.0.0.1, port=5347+
    +Mar 30 19:41:04 rudi jabberd/s2s[42098]: [4] [router] write error: Broken pipe (32)+
    +Mar 30 19:41:04 rudi jabberd/s2s[42098]: connection to router closed+
    +Mar 30 19:41:04 rudi jabberd/s2s[42098]: attempting reconnect (2 left)+
    +Mar 30 19:41:06 rudi jabberd/s2s[42098]: attempting connection to router at 127.0.0.1, port=5347+
    +Mar 30 19:41:06 rudi jabberd/s2s[42098]: [4] [router] write error: Broken pipe (32)+
    +Mar 30 19:41:06 rudi jabberd/s2s[42098]: connection to router closed+
    +Mar 30 19:41:06 rudi jabberd/s2s[42098]: attempting reconnect (1 left)+
    +Mar 30 19:41:08 rudi jabberd/s2s[42098]: attempting connection to router at 127.0.0.1, port=5347+
    +Mar 30 19:41:08 rudi jabberd/s2s[42098]: [4] [router] write error: Broken pipe (32)+
    +Mar 30 19:41:08 rudi jabberd/s2s[42098]: connection to router closed+
    +Mar 30 19:41:08 rudi jabberd/s2s[42098]: shutting down+
    +Mar 30 19:41:08 rudi org.jabber.jabberd[42092]: ERROR: router died. Shutting down server.+
    +Mar 30 19:41:08 rudi com.apple.launchd[1] (org.jabber.jabberd): Throttling respawn: Will start in 4 seconds+
    +Mar 30 19:41:11 rudi servermgrd[82]: servermgr_jabber[E]: Error -- jabberd service failed to start+
    +Mar 30 19:41:11 rudi servermgrd[82]: servermgr_jabber[W]: some jabberd processes failed to start+
    +Mar 30 19:41:11 rudi servermgrd[82]: servermgr_jabber[N]: waiting for jabberd to finish shutdown...+
    +Mar 30 19:41:11 rudi servermgrd[82]: servermgr_jabber[N]: jabberd service shutdown completed.+
    +Mar 30 19:41:11 rudi servermgrd[82]: servermgr_jabber[E]: Error -- failed to start service: jabberd+

  • Mail completely broken after 10.9.4 update

    Since the Mavericks update, my email functions are all haywire.
    It takes minutes to open mail.
    Commands don't work. For instance,
    Mail will move to trash or junk, but not delete. When I restart, it is back in my inbox.
    The "Rebuild" command doesn't start at all.
    Mail crashes or needs to be force quit on every startup
    On startup, I see that apple security is looking for a sandbox fs extension that is no longer there. Anybody know how I can get security to stop searching for the long ago deleted extension/app?
    Crash reports say: ReportCrash[551]: Invoking spindump for pid=477 thread=36897 percent_cpu=54 duration=167 because of excessive cpu utilization
    9/20/14 3:20:08.000 PM kernel[0]: process Mail[477] thread 36897 caught burning CPU! It used more than 50% CPU (Actual recent usage: 54%) over 180 seconds. thread lifetime cpu usage 91.279920 seconds, (87.265493 user, 4.014427 system) ledger info: balance: 90009539002 credit: 90009539002 debit: 0 limit: 90000000000 (50%) period: 180000000000 time since last refill (ns): 164654319357
    When I try to invoke Rebuild, console message says Mail[477]: View Based NSTableView error: preparedCellAtColumn:row: was called. Please log a bug with the backtrace from this log, or stop using the method.
    Can anyone offer any insights?
    I have already done the following:
    Reset PRAM/NVRAM
    Started in Safe Mode
    Shut down, unplugged for 15 seconds and rebooted
    Verified/Repaired disk permissions
    Ran a complete diagnostic with Tech Tools
    Ran a complete virus check
    Uninstalled Clean My Mac
    Changed trash preferences in Mail, then rebooted and changed them back.
    All was fine before the update to 10.9.4
    Updated today to 10.9.5, no help
    I do have a time machine back up, but not sure what I would need to do to go back to an earlier version of Mavericks.
    Thanks,
    Pam

    Please follow these directions to delete the Mail "sandbox" folders. In OS X 10.9 there are two sandboxes, while in 10.8 there is only one. If you're running a version older than 10.8, this comment isn't applicable.
    Back up all data.
    Triple-click anywhere in the line below on this page to select it:
    ~/Library/Containers/com.apple.mail
    Right-click or control-click the highlighted line and select
              Services ▹ Reveal
    from the contextual menu.* A Finder window should open with a folder named "com.apple.mail" selected. If it does, move the selected folder—not just its contents—to the Desktop. Leave the Finder window open for now.
    Log out and log back in. Launch Mail and test. If the problem is resolved, you may have to recreate some of your Mail settings. You can then delete the folder you moved and close the Finder window.
    This action will delete any custom Mail stationery that you have created. If you want to preserve it, ask for instructions.
    If you still have the problem, quit Mail again and put the folder back where it was, overwriting the one that may have been created in its place. Repeat with this line:
    ~/Library/Containers/com.apple.MailServiceAgent
    Caution: If you change any of the contents of the sandbox, but leave the folder itself in place, Mail may crash or not launch at all. Deleting the whole sandbox will cause it to be rebuilt automatically.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination  command-C. In the Finder, select
              Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

  • IChat Bonjour broken after 10.4.6 update

    After running the OS X 10.4.6 update yesterday, Bonjour suddenly stopped fucntioning properly in iChat. iChat with AIM buddies functions fine. But Bonjour tells me I'm all alone on the network -- even though other computers show up when I browse Network. Others in my office who have not yet updated are not experiencing any problems seeing each other in Bonjour.

    Hi Scott,
    Welcome To The Apple Discussion Pages.
    I have just got my Intel MacBookPro and updated it to 10.4.6 and it works fine over Bonjour
    Both are now on 10.4.6 which maybe a help.
    Having said that I would run the Combo intaller for the computer type you are on as this often sorts out little quirks like this.
    10:30 PM Wednesday; April 5, 2006

  • CUPS broken after 10.4.11 update

    The 10.4.11 ppc combo updater broke the CUPS installation on my system (iMac G5, 10.4.8).
    I did repair permissions, tried to reinstall the printers with Printer Setup Utility, used Printer Setup Repair. http://www.fixamacsoftware.com/software/psr
    That CUPS was hosed was pretty clear soon. No printers available. Not possible to install them again. cupsd was not invoked after restart. Printer Setup Repair said something about a wrong configuration file, which i couldn't repair, meaning i had no clue how to.
    Instead i noticed frequent crashes of printers.cgi, pstops, pap, jobLogFilter05AE (whatever that is) in the console.
    Searched for a CUPS installation pkg but didn't find one that would compatible with osx and i wouldn't know what version to take anyway. Apple does not offer anything on their website. While writing this post a new mac-version of CUPS was released, but only source code, no binary. Check cups.org if you want to know more.
    Finally i did a file by file comparison with my backup. Yes, i do that occasionally, the backup, not the comparison, would be kinky though. Some files were noticeable smaller, some missing. e.g. libcups.2.dylib 346 KB before update, 108 KB after update.
    In a kind of brute force - couldn't bother with archive install 'n stuff - i manually copied the files back and - surprise - printing worked again.
    I am not a tech savvy person, i don't know what i'm doing when copying files back and forth from invisible system folders like /etc, /usr or whatever. Actually i really think i should not have been bothered with that first hand.
    Since i am curious, still a bit of a believer in Apple, thinking "it sure was my fault" and already made good experiences with reapplying combo updates if something's hosed i tried the combo updater again. Guess what. Same results and procedures as before. Bummer.
    Since i am still curious i searched through my files and found a cups-1.2.7.dmg from last year. This will be involved in my next attempt to get a proper CUPS installation when i'm in the mood.
    By the way: same update, different issue.
    10.4.11 caused also major problems on my powerbook G4. Frequent application crashes and system halts. Console says: CGSResolveShmemReference : offset exceeds bounds. Which has something to do with…bad memory? Hardware failure? Really?
    Applejacked and memtested the machine over night. No more problems with the shmem-****. (Your favourite 4* word here)
    Never give up on a failing system.

    Hey jens
    I have a similar problem than yours, the one you had with your powerbook G4. although i have a mac book pro.
    after 10.4.11 a lot of my applications (itunes, ical, addressbook, activity monitor, greenfoot, system profiler) are crashing at start. i had problems with cups before (because i installed a different version) and they got solved when i installed version 1.3
    I read only about updating the prebindings. and when i do :
    sudo update_prebinding - debug -root / -force
    i get many many lines like this one :
    update_prebinding: warning: could not link /System/Library/QuickTime/QuickTimeH264.component/Contents/MacOS/QuickTimeH264: dylib not prebound: /usr/lib/libcups.2.dylib
    all of them say could not link BLA because the libcups.2.dylib is not prebound.
    The weird thing is that if i run all these applications in my System Administrator user, everything runs fine.
    At this point i only wish to uninstall cups as it has only given me trouble and nothing else.
    Is there a good way to do this ? (googling uninstall cups 1.3 mac does not give me anything ...)
    It seems that the only post about this is yours, so i would really apreciate some help from you.
    thanks!
    Carlos

Maybe you are looking for

  • No Media Transfer Protocol ("MTP") on Clip Jam ? Coming soon?

    I notice that my new Clip Jam doesn't seem to support the 'MTP' (Media Transfer Protocol) - whereas I believe older Clip models used to ? Is this something that will be introduced by a Firmware Upgrade at some point ? My current Firmware is '1.03' wh

  • Help! RE: Bitrate Too High!!

    I'm still using DVD StudioPro 2. I've imported the ".m2v" and ".aif" files generated from iMovie2 and Quicktime. I used a 2 pass variable option. After loading both files into DVD/SP2, when I try to simply "build" the file, it goes 20%, then gives me

  • SEM BCS Faq's

    Hi Friends, I will have technical discussion on SEM BCS. Please send me the some useful material on SEM BCS and please send me any FAQ's from interview presepevtive.I would appriceiate if any body respond to this post. It would be very great helpful

  • I've downloaded the upgrade several times and I'm still getting the message that I'm not on the latest at sign on

    I don't know what more to add. I have a Mac Os X

  • Solaris 11.1 Grub failure

    Hi all I've just downloaded the latest Solaris 11.1 live image and burnt it to a DVD and booted up all OK. However when I actually install it to the local drive it fails to boot, giving me a grub recovery prompt. ? In another life I used to teach peo