Automatically add all scopes depending on role

Hi,
I have one environment with about 15 scopes (one scope for public content and then one per branchoffice)
now I got the following question: is it possible somehow to automatically add all scopes when new content is added that is meant to be public?
this is currently an action that can only be done by the AD group that has the full administrators role who create new stuff that will be accessible for the whole environment.
once new content is added they have to manually modify the security scope, so we would like to automate this somehow.

I’m cleaning up old post, did you figure this out yet, if so how?
There is nothing built-in to do this, you might be able to do something like this via the SDK but that might be a lot of work. IMO I wouldn’t worry about it, the CM12 Admin will learn soon enough to setup thing correctly when the ticket get sent back to
them to do more work.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Similar Messages

Automatically add user to an OIM role using rule

Hi,
I am using OIM11g and I have created a rule with condition
Oragnizaion Name == testgroup
I have attached this rule to an OIM Role testrole. but when I create user with organization as tesgroup, user is not attached to OIM Role testrole.
thanks.

Hi Rajiv,
I agree with you as it was working fine in my env also but now suddenly its not working i tried to create new rule and role. One interesting thing if i change user's organization to testgroup1 and after that if i again change user's organization testgroup than this rule is working properly.
Is this rule is related to Change Organization task ? as when I change value of organizaion then rule is working.
thanks.

Is There A Way To Auto 'Add All' MSN Buddies to iChat (Jabber)??

Hello all.
I have successfully registered for a Jabber account and "registered" the Jabber /MSN Gateway via PSi.
I remembered a long time ago before Tiger I attempted this with iChat, and all my MSN buddies are automatically added into iChat, just like in MSN.
But now when I go online in iChat with my Jabber account, it is empty.
Is there a way to "automatically add" all my MSN buddies??
Also another Question: It is only possible to activate 1 Jabber account at one time?? I have another one with my Gmail buddy, when I activate my Jabber MSN, the Jabber Gmail becomes uncheck...
Is there a way to activate ALL Jabber accounts??
Thanks and cheers

No, it's not the same Jabber server as the last time... but on the 2nd time when I log on to my Jabber account in PSi and make the MSN Gateway active, all my buddies in MSN started to appear in a list in the main window... that did not happen the 1st time round... so maybe the "push" thing you mentioned maybe happening here... but after that I did not have the time to go log on iChat again...
Thanks and cheers

Automatically add email contacts to new directory users?

Mac OS X.6 Server. Almost all users utilize the webmail interface.
Is there a way to automatically add all current user email addresses in Workgroup Mgr to new users when created?

NeddySeagoon wrote:
but I can't figure out how to get the 'saved' email address to come up with the option to Create A New or Add To An Existing Contact.
If by "'saved' email address" you mean the autocomplete email suggestions that are given when addressing new emails, there isn't any way to use these to create new or add to existing contacts.

Can I automatically add people?

Is it possible to automatically add all the people with my company's email, current and future, to Lync, or do I have to register them once they get into my company?

Hi,
Agree with Anthony,
There are not any other automated ways to copy all users into contact lists.
You can also refer to the link about a script may help you:
http://www.expta.com/2011/01/introducing-lyncaddcontacts.html
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found
there. Please make sure that you completely understand the risk before retrieving any suggestions from the above link.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Automatically add role of Contact Person when BP is created as employee

We have done the configuration and setup to transfer OM data from ERP (ECC 6.0) to CRM 7.0. Before we execute the ALE job, we have one item we would like to add to the process.
We are a County Government implementing CRM Incident Management. Users will need to assign and forward Incidents to defined Contact Persons in various Org Units. It would require significant manual effort to edit BP records for each employee to maintain the Contact Person role.
Is there a way to automatically add the Contact Person role to each Employee BP at the time that the BP is created during the transfer of OM data? In other words, when IDocs are posted using RBDAPP01 in CRM, can the BP be created with the General role, the Employee role AND the Contact Person role at that time?
I have not found a BP configuration which implements this. I also did not find a switch in T77S0 which would cause this to occur.
I have searched this forum and the the CRM General Questions forum for this issue. I have found a few threads which posed the question but none which provided an answer for CRM 7.0. Please let me know if I have overlooked a previously posted answer.
Thank you for your help and advice.
Alannis Bratton

Hi Robert.
Thank you for the suggestion. However, this isn't related to creating the Contact Person role when creating a contact relationship directly in CRM. What we need is the automatic creation of the Contact Person role at the same time that the Employee BP is created via the ALE transfer of OM data from ECC to CRM.
Alannis Bratton

Automatically add MK- role when creating a related person for a student

Hello,
When creating a related person for a student there are 3 roles added to the BP:
-000000     BP (General)
-FS0000     Financial Services BP
-PSCI10     Related Person
Can anyone help me further on how to automatically add the MKK role when creating a related person?
Thanks for your help,
Lukas Molenaar

Hi Michael,
Thanks for answering it really helped me out. But Iu2019m not quite there yet.
I have the Role Grouping Category and Role Group with the 2 roles (PSCI10 and MKK).
My suspicion is that somewhere else in the IMG lays the problem. Because when you check settings for students as business partners in the IMG Path: Campus Management -> Campus Management Master Data -> Students -> Students as Business Partners -> Check Settings for Students as Business Partners.
Line nr 7 says: u201CThe definition of BP role for related person PSCI10 is correctu201D. From that I conclude (hope that is correct) that when you make a related person the BP is only created with BP role u201CPSCI10u201D.
This is because when I deliberately make that check fail (so I have the help for that line) it says:
u201CIn IMG activity Define BP Roles, you define a BP role for related person, assign this BP role to BP role category PSCI10, mark this BP as the standard assignment of BP role category PSCI10, and assign this BP role to BP view PSCI10.
That tells me it is only linked that the BP role u201CPSCI10u201D.
Can you please help me further with my problem?
Thanks,

Automatic Import Index Entries and Add All References?

I have figured out how to import a list of index entries to automically generate an index. Problem is, it doesn't allow me to choose the Add All feature to search the entire document for those terms. What am I missing?

I have figured out how to import a list of index entries to automically generate an index. Problem is, it doesn't allow me to choose the Add All feature to search the entire document for those terms. What am I missing?

How can I bypass Automatically Add to iTunes?

I have a large CD collection (>3000) that I've ripped to iTunes in ALAC format; I only listen to CD or better quality music, so I don't have any mp3 or AAC files in my iTunes library. I keep my music on an external hard drive. I recently bought a larger external hard drive and moved all of my music to that drive. For some reason, iTunes chose to put all of my music in a folder called "Automatically Add to iTunes". This was fine, except that I could no longer see the contents of the hard drive; however, I did know that the files were there, becasue of the disc space that they consumed.
Today, I ripped two new CDs to the hard drive through iTunes and I noticed that iTunes placed the music folders for those CDs outside of the "Automatically Add to iTunes". I decded to drag the new folders into the "Automatically Add to iTunes" folder. When I did so, all of the previous music disappeared and I cannot recover it. Fortunately, I have a copy of Sentuni, so I'll be able to put the music back on the hard drive from my iPods, but this process will require several hours. In addition, ripping my CD collection to iTunes required a lot of time, so I'm not pleased with the "Automatically Add to iTunes" folder feature. Is there a way to disable this feature, so that I can simply put my music on my external drive and be able to see that the folders are there.
I've been a devoted Apple customer for almost a decade, so I won't get too upset over this issue, but I wish that your developers would have addressed this issue during the development stage. Thanks for your attention to this problem.
Best,
Heath

Heath Watts wrote:
If only this were the case. I tried to move several albums into the "Automatically add to iTunes" folder, which resulted in thousands of albums being erased from the folder. One should be able to drag a music folder into the "Automatically add to iTunes" folder without iTunes erasing the original contents of the folder.
It didn't erase anything.
It automatically added them to iTUnes and moved them to the correct folder (Movies, Music, etc.) in the location shown in iTunes prefs > Advanced - iTunes media folder location.
I would like to disable the "Automatically add to iTunes" feature in iTunes,
You "disable" it by not putting anything into it. If you don't want to use it, don't use it.
If you want to manually manage, do not put anything into this folder.
Go to iTunes prefs > Advanced and uncheck Copy files to iTunes media folder when adding to library.
Then File > Add to library adn select what you want to add to iTunes. Do NOT put anything into the Automatically add to iTunes folder
and would like to be able to see the albums and artists on my external hard drive without having to do Spotlight searches
You wouldn't have to do Spotlight searches anyway.
The files are in /Music/Artist/Album folderin the location shown in iTunes prefs > Advanced - iTunes media folder location.
Also, in iTunes, you can select a song, right click - Show in Finder.

How to add all photos in one Album

Hi,
I bought iMovie yesterday and I have albums in photos application. I want to add all photos in one album to iMovie.
Thanks
Best Regards

They can only be added one at a time, a bit annoying but that's the way.
Add photos
With your project open, scroll the project timeline so that the playhead (the red vertical line) appears over the location where you want to add the photo; you can move the photo later if you want.
If the playhead is resting over a video clip, the photo is added before or after the end of the clip closest to the playhead.
Tap the Media Library button , and then tap the Photos button at the bottom of the screen.
Tap Camera Roll, Photo Library, or an album, and then tap the photo you want to add.
To preview a photo before adding it, tap and hold the photo in the Photo browser until it appears in the pop-up viewer.
The added photo appears for a duration of 3 to 6 seconds, depending on the length of the transitions that appear before and after the photo, but you canchange this duration.
A Ken Burns effect is also applied to the image, which means the camera appears to sweep across and zoom in on the photo. You can adjust this effect. Go to Edit a photo to learn how.
You can ask Apple to fix this in the next update:
http://www.apple.com/feedback/imovie_ios.html

How can I add all of my PDF files at once

Is there any way to add all of my PDF files that are in different folder at once, kind of self search option that add the files automatically, thanks.

I'd also really like this feature added (unless I'm just missing something that is)

UIX 2.1.21: Date OnBlurValidator automatically add current month or year?

Would be nice if the OnBlurValidator for a UIX Date field could automatically add a missing month or year.
e.g. Format dd.mm.yyyy
When the user enters 01.01. the current year could be added automatically.
Or when the users only enters 01. the current month and year could be added.
Would be a nice feature additionally to the already existing lenient-date-formats = true.
Really great would be to allow entering values like "now" / ".", "yesterday" / "-" or "tomorrow" / "+" that are evaluated to the according dates (of course internationalized).
Thanks, Markus

hey mill1640,
Did you ever get your iPhone to register with iTunes? I just upgraded as well to Snow Leopard, and my my isn't recognized at all also.
If you did get this resolved, I would appreciate a little suggestion in the right direction.
Many thanks,
Josh

(Bold 9900 - BBOS 7.1) Is there a way to automatically add reminder alert when flagging a message for follow-up?

I love the feature in Outlook that lets me flag a message for follow-up and automatically adds a default reminder at the end of the day. Is this something I can configure my Blackberry 9900 to do (running 7.1)?
As far as I can tell, when I flag something for follow-up, it adds a flag but does NOT add any reminder alerts. If I want to do that, I then need to manually add the reminder and set it (which is a little cumbersome).

I guess timed message is on the wish list
However in all my forms I use following scenario to validate all data entry at one time and then submit...
I use regular button and add code in Click event
JS example.....
var errorFlag = 0;
var errorMsg = "";
if (validation expression 1) {
     //true/pass
     //no need to change following values
     errorFlag = errorFlag;
     errorMsg = errorMsg;
}else {
    //false/fail
   //set the flag and message accordingly
    errorFlag = errorFlag + 1;
    errorMsg = errorMsg + "validation message1" + "\n"; //\n for new line with in the message
if (validation expression 2) {
     //true/pass
     //no need to change following values
     errorFlag = errorFlag;
     errorMsg = errorMsg;
}else {
    //false/fail
   //set the flag and message accordingly
    errorFlag = errorFlag + 1;
    errorMsg = errorMsg + "validation message2" + "\n"; //\n for new line with in the message
//finally
if (errorFlag > 0) {
    //>0 indicates there are one or more errors
    xfa.host.message(""+errorMsg);//display all messages at one time
    exit; //now since there are validation errors you can stop processing further and exit the event
//add submit code......here....

How do I automatically add a background/watermark to a PDF?

Hi!
My name is mike and I am working on an invoice draft. The invoice is created within Microsoft Access and will be printed out on the Adobe PDF printer.
I'd like to automatically add a background with some graphical details (which is not possible with Access in my case) to the PDF when printed out to the specific PDF printer.
Now I have a background preset and I do have to select it every time and save the changes, which is quite time consuming when there are many invoices.
I appreciate your help and thank you in advance!
mike

Hi Srv-02,
You can create a custom action to add Watermark for all the generated pdfs.
You can also accomplish this via Javascript: https://acrobatusers.com/tutorials/watermarking-a-pdf-with-javascript
Regards,
Rave

Mail server automatically cc all email for user to other acct but group...

Back on April 2007, David_X answered this question:
How to have the mail server automatically cc all e-mail for user to other accounts, (gmail, hotmail, etc). Here is the old post that explains that:
http://discussions.apple.com/thread.jspa?messageID=4357149&#4357149
What I did not catch at the time was if you setup a Group, one of three ways, the cc step no longer works. There is a fourth way but it is not practical. Creating local groups on individual Macs.
*Group method 1 per David_X:*
Use edited group files on the server.
The following sends to members of groups but does not show all recipients in the received message...
In /etc/postfix/aliases, add...
groupname: :include:/path/to/groupname.txt
In a file called groupname.txt (using plaintext editor)...
[email protected]
[email protected]
Reload aliases...
sudo newaliases
sudo postalias aliases
sudo postfix reload
Mail sent to [email protected] gets passed to amavisd once, before then being relayed out for each individual recipient.
*Group method 2 per David_X:*
Make a user, e.g., "accounts"
In mail settings, select 'Forward' option and enter the group members' email addresses, comma separated e.g.,
[email protected],[email protected]
This gets a bit 'long' for lots of members.
The email then gets sent to each of the people in this list.
*Group method 3 that I just discovered:*
Create a group in Workgroup Manager.
Drag the users you want in it.
Save.
Test sending to that group.
Best part, the group name shows up in Address Book if you have LDAP setup.
So I have setup all three. If I send an email to any type of group, they work.
The problem:
If one of those members in the group also has a BCC setup to Gmail or any other outside email, they never get the e-mail copied out to the external account.
Example:
I send an email to [email protected]. He gets the email there and also a copy at his Gmail account.
If I send an email to the Sales group that jsmith belongs to, he gets the email there but nothing at the Gmail account.
It looks like the mail server processes the "aliases" file and skips the "Recipient_bcc" file that handles the forwards.
Is there a way to have my cake and eat it too? David_X your thoughts also?
Thanks everyone!

Bump.
Short version. Sales guy has a Gmail account he wants his e-mail copied to also.
Send e-mail directly to his Xserve account, he gets it there and it gets sent on to his Gmail account.
Send an e-mail to the sales Group that he is a member of, he gets it there but it never gets sent out to the Gmail account.
Ideas?

Automatically add all scopes depending on role

Similar Messages

Maybe you are looking for