Automatically perform calculations in report for editable items

Hello,
I have a report which consists of some editable text items. These editable items correspond to different columns in the table. Now in the report I want to make one column item to be automated so that it can perform some calculations based on other columns data entered by the user in the report. Like, for example if the user changes text item data for col3, col4 then it should automatically perform the calculations for col10 ; similar to onchage event. Consider a situation where in a user comes and enters data in the report throught the text item for col3, so whenever user changes the data for col3 it should perform the calculations for col10 automatically.
Can anyone please help me with this issue.
Thanks,
Orton

Shijesh,
Sorry for the delay in getting back to you.
In my case its a normal report but the thing is I need to calculate based on the data entered by the users in different text items which are present in different regions.
I have five fields to calculate on the fly like based on the data entered by the users. Below are the five columns. I have the item Ids specified for each of these editable items present across different regions.
PITIA's (f20) = First P And I Amount(25) + County Tax amount(f26) + Hazard Ins Amount(f27) + Over or Short Amount(f28)
F/E Ratio(f21) = PITIA's(f20) / (Borrower 1 Income(f29) + Borrower 2 Income(f30)) (This should be %)
B/E Ratio(f22) = ( PITIA's(f20) + MI Payment(f31) + 2nd Mort Payment(f32) + Revolving Liabilities(f33) + Installment Liabilities(f34) ) /( Borrower 1 Income(f29) + Borrower 2 Income(f30) ) (should be %)
LTV(f23) = First Principal Balance(f35) /Current Value(f36)
Net Disposable(f24) = ( Borrower 1 Income(f29) + Borrower 2 Income(f30) ) - ( PITIA's(f20) + MI Payment(f31) + 2nd Mort Payment(f32) + Revolving Liabilities(f33) + Installment Liabilities(f34) )
shijesh can you please help me out with these calculations.
Thanks,
Orton

Similar Messages

PR and PO should be display in IWBK report for stock item.

Hi Exterts,
Our client requirement is to display PR and PO number in IWBK report for stock item as well.
I know PR and PO can be display in IWBK report for non-stock item but how we can display PR and PO for stock item,as PR is generated through MRP for stock item.
Please share your ideas on this.
Regards
Vishu

Vishu,
In typical MRP settings you "procure to stock" not "procure to order".
This means that there is no direct link between the PM/CS orders and any PR/POs created via MRP.
Subsequently you will not be able to show this data in IWBK.
However, we are currently designing a customer-specific report similar to IWBK that also counts the number of open POs for a given material on a PM/CS work order. The user can then navigate to ME2M (PO list) or MD04 (stock requirements list) to get further details.
PeteA

Adding a characteristics to AR Drill down report for line items

I have raised an OSS note on this, but they deem this to be consulting.
I have an AR drill down report for line items
It calls the structure RFRRD20.
I need to add a value into the characteristics so I can use it in the drill down report.
I have appended the structure, added a value in TKAF for the field, and it still does not show.
Has anybody done something similar?
I am sure this is easy, but only when you know how, so if you know how to do it please can you let me know.
thanks
Mark

Hi Mark
    I am also in the same situation where i need to add two characteristics (invoice date, due date) to the AR drill down reports. I added them to the structure and TKAF table as you did, but still could not get them to the drill down reports (FDI5 or FI1).
   From your posts, i see that SAP's response was that it is not possible to add characteristics to AR drilldown reports? Did they mention any reasons or OSS notes? How did you handle your requirement, were you able to work around?
   Your suggestions would be highly appreciated.
Thanks
Vamsi

Calculation of cost for subcontracting item of type N (non stock) as it calculating for type L(Stock)

Hi Gurus,
I have a Requirement for calculating the cost for Subcontracting Non stock items N as it is getting calculated in standard functionality for subcontracting items of Type L.
This will be done in CK11n ( used to calculate the standard cost estimate of the product) for header as well as component materials.
please suggest the user exit or Badi where i can change.
Please refer the below logic-
BOM for the material 2000500 as Header and 1LPL0835298AB as a component and this component has an assembly with 7008508 as a component and this component is an Sub contracted item and this has an assembly with component 1LBA182151-3.
Price calculation for the material 7008508 (Item Category as N). Since this is sub contracted item the price will picked from field EINE-NETPR.
In EINA, pass the material (MATNR=7008508) to fetch the list of info records (INFNR) created for that material.
Then it has to input those info records to EINE table along with Purchasing organization (EINE-EKORG=PT02).
From the output of EINE table, it should compare the price (EINE-NETPR) of the PIR and should take the least price from those PIR`s.
If the currency is other than PLN, then it should be converted to PLN based on conversion charges.
For Material (MATNR=1LBA182151-3), it should pass the material number to table MBEW along with valuation area (BWKEY = WERKS).
From the output, it should check the Price control (VPRSV) ‘V’ or ‘S’
If ‘V’ the price will be picked from the field “VERPR”
If ‘S’ the price will be picked from the field “STPRS”
Also from the output, it should check the Price unit (PEINH) ‘1’ or other than ‘1’. If it is other than ‘1’ it should divide the VERPR or STPRS by PEINH. Then this is the price of the Material “1LBA182151-3”.
The material (MATNR=1LBA182151-3) should be passed to table “MARA” and will take the Base unit of measure from that table “MEINS”.
Br,
Surya

Hi Surya,
Please put breakpoints in any of the below BADI's and check if any of them will trigger for your
requirement:
VALUATION_CK                            BAdI for Valuation in Product Costing
CK_KALAMATCON2_CI                       BAdI for CI Fields for Table KALAMATCON2
COSTINGRUN_CK                           Edit Costing Run
COST_APPORTION_CK                       Maint Apportionment Structure Joint Production: Dist Rules
CO_PROD_COSTING_CK                      Cost Management for Joint Products (Costing, Target Costs)
DATA_EXTENSION_CK                       For Data Enrichment in Product Costing
DYNPRO_EXTENSION_CK                     BAdI for Interface Enhancement in Costing
ORDER_COSTING_CK                        Enables Header Data Changes in Preliminary Order Costing
QUANTITY_STRUCT_CK                      Enables Quantity/Structure Changes in Costing
SUR_STOCK_TRANSF_CK                     Overhead on Materials with Stock Transfer Between Plants
Thanks
Sri

Aging Analysis report for open Items in SD

Hi ,
Please give the code snippet for the following case.
aging analysis program for open items:-
payments not receivecd for 15 days,30 ,60 ,90days
imput:
custno range
sales area
days 30,60,90 selection sort by cust no,sales organization
output :report program ALV grid format
Many Thanks in Advance.
Raj

There are couple of Standard Report for Customer Open Items.
RFDOPO00 - List of Customer Open Items.
RFDSLD00 - Cutomer Balances
Also there is another standard report....
Run the Tcode 'S_ALR_87012178", that is "Customer open Item analysis by Balance of Over dues".
Copy the Report and make necessary changes.
Modification is always required to get a "good looking" aging report, there is no standard.
Hope this helps.
Vinodh Balakrishnan

Deliery block sales orders report for TAS items

Hi,
User requirement is need a report which gives list of sales orders which have the delivery block in sales order schedule lines.( of third party items TAS)
I found V.14 and VA14L to find out the sales orders which give the list of sales orders which are blocked for outbound delivery (in schedule line delivery block).
However, for third party items sales order with item category TAS are not coming in the report of V.14.
I think the reason is because of the third party items are not relevant for delivery hence v.14 report not fetching the data of third party orders(TAS), is this my understanding is correct?
If the user is insisting on for even third party items also they want a report which should give the list of sales order which are blocked for delivery block then what is the best way to advise the user?
And does it make any sense putting delivery block for third party items ? because we are not delivering the goods to customer and even if you put delivery block we can’t stop PR,PO and MIGO and MIRO etc .
Thanks,

is this my understanding is correct?
Absolutely correct.
they want a report which should give the list of sales order which are blocked for delivery block
Since the inventory / stock of material would be handled out of SAP, what is the need to set a delivery block. Even if you set delivery block, vendor is going to deliver the material.
what is the best way to advise the user?
Convince the user what they are expecting in SAP are logically incorrect. When the material is being delivered by a vendor, what is the use if you set delivery block for this item? What they are going to achieve.
And does it make any sense putting delivery block for third party items ?
Definitely, no
G. Lakshmipathi

What is the formula for calculating average cost for an item in inventory

Hi,
Can someone please share the formula to calculate average cost for an item in inventory which uses Average Costing?
Thank you,
Naren.

HI
When a transaction updates the average cost of an item, the new average cost is calculated as follows:

Automatic SOS in shopping cart for reservation items

Dear all,
I am creating a shopping cart using a catalog item that creates a reservation in the backend (classic). However, when i change sthing, the system reads an info record that exist in the back-end and assigns the vendor as the source of supply for this items.
Why the system behaves like that?
BR

Hi,
Please check in config setting "Define Backend Objects ".
Please debug the transfer process.
http://wiki.sdn.sap.com/wiki/display/SRM/Follow-ondocumentdetermination(PR,PO,RS)
Thanks,
Anshu

Deleted Items Appearing on the FBL3n Report for Open Items

Hi All
We just went live and I am facing a huge issue;
I deleted many migration entries from loads of GL Accounts for multiple Co Codes, but on the FBL3n report, whenI execute with the option of 'Open Items' only, I still see the deleted items with a green check sitting there.
How can i get those from being visible?
Thanks for the support
RS

Hi:
This is standard behavior. Your GL accounts are managed on line item basis hence despite of the fact you reversed the entries they will continue to be shown in open item selection criteria which in fact are not open items. It makes no sense to see a GL account in FBL3N on open item date since this account has been configured on the basis on line item management and i will continue to be shown as line item with green sign . Execute report FBL3N with open item or with all item (with date you give in open item) you will see the same figures and same line items. However you can exclude the reversed entries by fetching reversed with (BKPF-STBLG) field from menu ..settings...special fields and hence excluding the entries having this filed update.
I hope this will solve your issue.
Regards

Improving the performance of Crystal Reports for Eclipse 2.0

Hi,
I am having some performance issues with displaying reports where it can take upto 30 seconds per user for each new session for the report to display. If we run this directly from the client (through Crystal 2008) it takes about 2 seconds.
The product only has 4 different rpt files but are constantly viewed by the clients (although with diffferent parameters). The users tend to come onto the system browse a couple of reports and log-off. They will do this about 3 - 5 x a day.
1) Can you cache the reports at an application level (rather than the session) (and is it recommended)
2) Create a separate web-service just hosting the Crystal Reports
3) Other mechanisms of calling the report (currently using addDiscreteParameterValue, replaceConnection, Logon [this replaceConnection and Logon is done for the master and every subreport], then using processHttpRequest
Anyone got any advice , recommendations or pearls of wisdom?
Probably have max 15 concurrent users which process these 4 reports.
Kind regards
Matt.

CR4E 2.0 currently uses 5 CPLs - 5 concurrent process license, which means it services up to five concurrent report requests. This isn't per-session, per-report, or per-user, but per-request (open report, next page, export).
So having 15 simultaneous users may lead to some requests being queued till a license is free.
For a more scalable solution, the recommendation is to go with a server-client solution like Crystal Reports Server Embedded or BusinessObjects Enterprise.
But to tune your CR4E app to see how much you'll be able to service, what I recommend is turning on Log4J logging to see where the performance is going.
Going from 2 sec to 30 sec between CR Designer (binary app) to CRJ (pure Java app) isn't out of performance expectations, but there may be ways to tune it.
For example, if you're doing replaceConnection or setTableLocation, you may just want to do it once to the rpt file during deployment, so you'd not need to change the connection info every time the report is run.
Saving to application context isn't something that CRJ is designed for - it's designed to have the ReportSource per-Session.
Sincerely,
Ted Ueda

Avoid automatic creation of purchase requisition for bom item N

Dear.
When I create a production order , for the components with bom item N the system create a purchase requisition. I need to avoid this automatic creation , do you know a solution to obtain this ?
Thanks.

For the many people that have asked this question.
N item category in the BOM is always going to propose direct procurement. Through configuration I have not found a way to make it go away from the planned order. You can make it go away from the production order.
The IMG path:
Plant Maintenance and Customer Service
-> Maintenance and Service Processing
--> Maintenance and Service Orders
---> Functions and Settings for Order Types
----> Define Change Docs, Collective Purc. Req. Indicator, Operation No. Interval
Under the Res/PurRq -> Specify Never
In order make this setting effective, you must define the following
system message to error or warning, as it is stated on note 569984
Version Appl.A. No. Cat
00000000 C2 280 W
Please note that this setting is effective for reservations and
requisitions.
The best solution is to use BOM item category L with the bulk indicator set. You will not get any direct procurement proposals or planned orders and you can use long term planning to see the time phased MRP results.

Report for editing the word document with xml tags

Hi all,
My requirement is to edit the contents of the word document in the presentation server through report programming and save that document in the presentation server.
For eg if my word document contains many xml tags with spaces < EDI_DS40 >, i would like to remove the spaces and i want it to be lyk <EDI_DS40>.Then say if i wanted to make some modification (addition, deletion,replacing with some text) in the text in some nth line of the document how can dis be dione.
Is there any function module or bapi which serves this purpose.
Can anyone pls guide me on dis.
Thanks & Regards,
Revathi.

Hi,
just to let you know I have sorted this.
http://macintoshhowto.com/leopard/how-to-merge-pdf-files-with-preview-in-leopard .html
Thanks.

Create AP/AR line item report for parked items

Dear all,
Has anyone been able to create a line item report in AP or AR that includes parked items? I have created an aging report using standard 0SAPDUEAN-01 as a base, using report painter. Now the Finance department want to be able to see the numbers of the parked invoices as well but I am not able to find a way to pull these.
Does anyone know if this is actually possible?
many thanks

Hi,
by using of TCODE. FBV3 it is displaying parked documents
based on document type.
K.Satish

Costs Report for inventory items

Does anyone know if there is a report where i can see all the items with their costs? I am using moving averag valuation method.
Thanks
Jacobo

Hi Jacobo,
I think you could use the Inventory Audit Report under Inventory-Inventory Report module to track the item cost.
Best Regards
Helen Sun

How automatically insert date when exit from Edit Item?

Hi all
Example: Sales - A/R -> A/R Invoice
when you input any symbol in field "due date" and will press tab beside you is automatically inserted current date. in system exist standart function transformations in date or not?
thank & hallo from moscow, russia

Hi Artem Artamonov
I'm not sure exactly what you asking, but you can chenge the display format. Go to administration->system initialisation->general settings and look on the display
tab.
Hope this helps

Automatically perform calculations in report for editable items

Similar Messages

Maybe you are looking for