Deleted Items Appearing on the FBL3n Report for Open Items

Hi All
We just went live and I am facing a huge issue;
I deleted many migration entries from loads of GL Accounts for multiple Co Codes, but on the FBL3n report, whenI execute with the option of 'Open Items' only, I still see the deleted items with a green check sitting there.
How can i get those from being visible?
Thanks for the support
RS

Hi:
This is standard behavior. Your GL accounts are managed on line item basis hence despite of the fact you reversed the entries they will continue to be shown in open item selection criteria which in fact are not open items. It makes no sense to see a GL account in FBL3N on open item date since this account has been configured on the basis on line item management and i will continue to be shown as line item with green sign . Execute report FBL3N with open item or with all item (with date you give in open item) you will see the same figures and same line items. However you can exclude the reversed entries by fetching reversed with (BKPF-STBLG) field from menu ..settings...special fields and hence excluding the entries having this filed update.
I hope this will solve your issue.
Regards

Similar Messages

Aging Analysis report for open Items in SD

Hi ,
Please give the code snippet for the following case.
aging analysis program for open items:-
payments not receivecd for 15 days,30 ,60 ,90days
imput:
custno range
sales area
days 30,60,90 selection sort by cust no,sales organization
output :report program ALV grid format
Many Thanks in Advance.
Raj

There are couple of Standard Report for Customer Open Items.
RFDOPO00 - List of Customer Open Items.
RFDSLD00 - Cutomer Balances
Also there is another standard report....
Run the Tcode 'S_ALR_87012178", that is "Customer open Item analysis by Balance of Over dues".
Copy the Report and make necessary changes.
Modification is always required to get a "good looking" aging report, there is no standard.
Hope this helps.
Vinodh Balakrishnan

Report for open process orders

Dear SAP experts,
As the period of the process order from open to close is not short, will take 1 or 2 months in our business case, so we want to find a report which can get the information just like the output of KSPP(for planned orders) .
I tried to analysis the logic of program KSPP, and it seems the function modules based on the planned orders only.
Is there any way to get the similar report for open process orders?
Many Thanks,
Lisa Yao

Is there any clues?

Foreign curr reval for open items - questions - very urgent

Hi all,
Can anyone explain me the account determination for open item exchange rate difference postings?
1.     What are the accounts meant for under tab Exchange rate difference realized (Loss, Gain)
2.     What are the account meant for under tab valuation (val loss 1, val gain 1 and Bal sheet adj 1)
3.     Accounts under translation tab (Loss, Bal sheet adj loss, Gain, and Bal sheet adj gain)
Also,
When I run F.05 for open item reval
1. Do I need to run customer and vendor open items as well by selecting the customers and vendors and checking the Valuate customer open items and Valuate vendor open items? Even though I have customer and vendor recon accounts in my g/l accounts selection and checked the Valuate g/l open items box
2. We check Reverse postings with reversal period as next period (for example if reval is done for period 3 then reversal period is 4), why do we need to reverse the postings.
Your help in this regard is highly appreciated and rewarded with points.
Thanks in advance,
Kumar

Dear Kumar,
About the acct determination for transaction KDF: open item exchange rate diff:
When you revaluate i.e. run the F.05 transaction for open items any loss is posted to the Val.loss 1 and any gain is posted to the Val.loss 2 account with its offset credit or debit to the Bal.sheet adj.1 account.
Now this is a provisional recognition of the FX difference. So long as the items remains open it will be revaluated in every period and a posting will be made. Now when you finally clear this open item e.g. pay the vendor or receive pymt from customer, the system will calculate the FX gain/loss at that time once again. This is the Exchange rate gain/loss realized. Thus, the accounts used will be those under tab Exchange rate difference realized (Loss, Gain)
The Accounts under translation tab is used in the scenario where you are maintaining more than once local currency e.g. 2nd local currency as 30. In this case you would want to translate your FX valuation to this 2nd local currency.
Regarding F.05 transaction:
1. Yes you will need to check the customer/vendor and GL open items to valuate them all. Since the customer and vendor reconciliation account are tied up to AR and AP, the program does not recognize them as a pure GL account.
2. You need reversal so that tracking of your fx valuation is easy. E.g:
You have open item in EUR and your local curr is USD. Lets us say ex rate is USD:EUR is 1:1.50 and open payable item is EUR 100
Open item in EUR-----Open item in USD--
Diff
Period 1: -
100--150--
0
Period 2: fx rate 1:1.60--100160--
loss of $10
Period 3. fx rate 1:1.30--100130--
gain of $30 over period 2.
If you don't choose the reversal postings, the system will record both the loss of 10 and the gain of 30 netting to 20. However, if you choose the reversal posting, the system will reverse the $10 loss in period 3 and just take the revaluation based on the period 1's rate i.e. difference btw 150 and 130 USD i.e. $20.
I hope this explains you the concept. Thanks,
Vishal.

The operation can't be completed because some items had to be skipped. For each item, choose File Get Info, make sure "Locked" is deselected, and then check t

The following error comes up when I try to install the updated Firefox:
"The operation can’t be completed because some items had to be skipped. For each item, choose File > Get Info, make sure “Locked” is deselected, and then check the Sharing & Permissions section. When you are sure the items are unlocked and not designated as Read Only or No Access, try again."
When I follow the instructions in the error message, it shows that my user name has read and write access. There are a couple other items that are read only. I tried to change this to read and write, but the Sharing and Permissions options are greyed out and will not let me change them. What is the work around for this? I would really like to install the new firefox.
Thanks.

Hello,
Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete the Firefox installation folder, which is located in one of these locations, by default('''This will NOT delete profile info such as bookmarks and history'''):
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
Please report back to see if this helped you!
Thank you.

View Customer number field in the FBL3N report

Hi All,
Is it possible to view the Customer Number Field in the FBL3N report??
Please revert asap.
Rgds,
Kunal Vichare
Moderator: Please, search SDN

Hello
Please find the process for adding additional field in FBL3N
SPRO->FA->GLA->GL->Line Item->Display line item with ALV->Define Special Fields for finding and sort data
Added the additional field for Customer account number.
Table Field name Field lable
BSEG KUNNR Customer
Thanks
Kameshwar Rao

I need the Log Report for the Data which i am uploading from SAP R/3.

Hi All,
I am BI 7.0 Platform with Support Patch 20.
I need the Log Report for the Data which i am uploading from SAP R/3.
I extract the DATA from R/3 into BI 7.0 DSO where I am mapping the GL Accounts with the FS Item. In the Transformation i have return a routine on the FS Item InfObject . I am checking the Gl code into Z table for the FS Item .
I capture the FS item from the Z table then update this FS item to Infobject FS item.
Now i need to stop the Data upload if i do not find the GL code in the Z table, and generate report for all GL code for which the FS item is not maintained in the Z table.
Please suggest.
Regards
nilesh

Hi.
Add a field that you will use to identify if the GL account of the record was found in the Z table or not. Fx, create ZFOUND with length 1 and no text.
In your routine, when you do the lookup, populate ZFOUND with X when you found a match (sy-subrc = 0) and leave it blank if you don't find a match. Now create a report filtering on ZFOUND = <blank> and output the GL accounts. Those will be the ones not existing in the Z table, but coming in from your transactions.
Regards
Jacob

PR and PO should be display in IWBK report for stock item.

Hi Exterts,
Our client requirement is to display PR and PO number in IWBK report for stock item as well.
I know PR and PO can be display in IWBK report for non-stock item but how we can display PR and PO for stock item,as PR is generated through MRP for stock item.
Please share your ideas on this.
Regards
Vishu

Vishu,
In typical MRP settings you "procure to stock" not "procure to order".
This means that there is no direct link between the PM/CS orders and any PR/POs created via MRP.
Subsequently you will not be able to show this data in IWBK.
However, we are currently designing a customer-specific report similar to IWBK that also counts the number of open POs for a given material on a PM/CS work order. The user can then navigate to ME2M (PO list) or MD04 (stock requirements list) to get further details.
PeteA

Adding a characteristics to AR Drill down report for line items

I have raised an OSS note on this, but they deem this to be consulting.
I have an AR drill down report for line items
It calls the structure RFRRD20.
I need to add a value into the characteristics so I can use it in the drill down report.
I have appended the structure, added a value in TKAF for the field, and it still does not show.
Has anybody done something similar?
I am sure this is easy, but only when you know how, so if you know how to do it please can you let me know.
thanks
Mark

Hi Mark
    I am also in the same situation where i need to add two characteristics (invoice date, due date) to the AR drill down reports. I added them to the structure and TKAF table as you did, but still could not get them to the drill down reports (FDI5 or FI1).
   From your posts, i see that SAP's response was that it is not possible to add characteristics to AR drilldown reports? Did they mention any reasons or OSS notes? How did you handle your requirement, were you able to work around?
   Your suggestions would be highly appreciated.
Thanks
Vamsi

Decrease the field width for apex item..

I cant decrease the field width for apex item. i used apex_item.text in the select query report region.
i want to change the field width. i tried to change the element width..but no use. pls help how to change it.
thanks and regard,
skud.

The third parameter to apex_item.text is p_size. You can set the field width with this parameter.
Jure

How to create a report with data using the Crystal Reports for Java SDK

Hi,
How do I create a report with data that can be displayed via the Crystal Report for Java SDK and the Viewers API?
I am writing my own report designer, and would like to use the Crystal Runtime Engine to display my report in DHTML, PDF, and Excel formats. I can create my own report through the following code snippet:
ReportClientDocument boReportClientDocument = new ReportClientDocument();
boReportClientDocument.newDocument();
However, I cannot find a way to add data elements to the report without specifying an RPT file. Is this possible? I seems like it is since the Eclipse Plug In allows you to specify your database parameters when creating an RPT file.
is there a way to do this through these packages?
com.crystaldecisions.sdk.occa.report.data
com.crystaldecisions.sdk.occa.report.definition
Am I forced to create a RPT file for the different table and column structures I have?
Thank you in advance for any insights.
Ted Jenney

Hi Rameez,
After working through the example code some more, and doing some more research, I remain unable to populate a report with my own data and view the report in a browser. I realize this is a long post, but there are multiple errors I am receiving, and these are the seemingly essential ones that I am hitting.
Modeling the Sample code from Create_Report_From_Scratch.zip to add a database table, using the following code:
<%@ page import="com.crystaldecisions.sdk.occa.report.application.*"%>
<%@ page import="com.crystaldecisions.sdk.occa.report.data.*"%>
<%@ page import="com.crystaldecisions.sdk.occa.report.document.*"%>
<%@ page import="com.crystaldecisions.sdk.occa.report.definition.*"%>
<%@ page import="com.crystaldecisions.sdk.occa.report.lib.*" %>
<%@ page import = "com.crystaldecisions.report.web.viewer.*"%>
<%
try {
            ReportClientDocument rcd = new ReportClientDocument();
            rcd.newDocument();
// Setup the DB connection
            String database_dll = "Sqlsrv32.dll";
            String db = "qa_start_2012";
            String dsn = "SQL Server";
            String userName = "sa";
            String pwd = "sa";
            // Create the DB connection
            ConnectionInfo oConnectionInfo = new ConnectionInfo();
            PropertyBag oPropertyBag1 = oConnectionInfo.getAttributes();
            // Set new table logon properties
            PropertyBag oPropertyBag2 = new PropertyBag();
            oPropertyBag2.put("DSN", dsn);
            oPropertyBag2.put("Data Source", db);
            // Set the connection info objects members
            // 1. Pass the Logon Properties to the main PropertyBag
            // 2. Set the Server Description to the new **System DSN**
            oPropertyBag1.put(PropertyBagHelper.CONNINFO_CRQE_LOGONPROPERTIES, oPropertyBag2);
            oPropertyBag1.put(PropertyBagHelper.CONNINFO_CRQE_SERVERDESCRIPTION, dsn);
            oPropertyBag1.put("Database DLL", database_dll);
            oConnectionInfo.setAttributes(oPropertyBag1);
            oConnectionInfo.setUserName(userName);
            oConnectionInfo.setPassword(pwd);
            // The Kind of connectionInfos is CRQE (Crystal Reports Query Engine).
            oConnectionInfo.setKind(ConnectionInfoKind.CRQE);
// Add a Database table
          String tableName = "Building";
            Table oTable = new Table();
            oTable.setName(tableName);
            oTable.setConnectionInfo(oConnectionInfo);
            rcd.getDatabaseController().addTable(oTable, null);
    catch(ReportSDKException RsdkEx) {
            out.println(RsdkEx);
    catch (Exception ex) {
          out.println(ex);
%>
Throws the exception
com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: java.lang.NullPointerException---- Error code:-2147467259 Error code name:failed
There was other sample code on SDN which suggested the following - adding the table after calling table.setDataFields() as in:
          String tableName = "Building";
            String fieldname = "Building_Name";
            Table oTable = new Table();
            oTable.setName(tableName);
            oTable.setAlias(tableName);
            oTable.setQualifiedName(tableName);
            oTable.setDescription(tableName) ;
            Fields fields = new Fields();
            DBField field = new DBField();
            field.setDescription(fieldname);
            field.setHeadingText(fieldname);
            field.setName(fieldname);
            field.setType(FieldValueType.stringField);
            field.setLength(40);
            fields.add(field);
            oTable.setDataFields(fields);
            oTable.setConnectionInfo(oConnectionInfo);
            rcd.getDatabaseController().addTable(oTable, null);
This code succeeds, but it is not clear how to add that database field to a section. If I attempt to call the following:
FieldObject oFieldObject = new FieldObject();
            oFieldObject.setDataSourceName(field.getFormulaForm());
            oFieldObject.setFieldValueType(field.getType());
            // Now add it to the section
            oFieldObject.setLeft(3120);
            oFieldObject.setTop(120);
            oFieldObject.setWidth(1911);
            oFieldObject.setHeight(226);
            rcd.getReportDefController().getReportObjectController().add(oFieldObject, rcd.getReportDefController().getReportDefinition().getDetailArea().getSections().getSection(0), -1);
Then I get an error (which is not unexpected)
com.crystaldecisions.sdk.occa.report.lib.ReportDefControllerException: The field was not found.---- Error code:-2147213283 Error code name:invalidFieldObject
How do I add one of the table.SetDataFields() to my report to be displayed?
Are there any other pointers or suggestions you may have?
Thank you

How do I delete a file from the Adobe Reader for iOS?

How do I delete a file from the Adobe Reader for iOS?

Read this:
http://forums.adobe.com/thread/1012973?tstart=0

Standard report(for open PO order items) with estimated Delivery dates

hi friends
i would like to know if there is any standard report(for open PO order items) with estimated Delivery dates on it.
thanks
alahari

ME2M (by material)
ME2L (by vendor)
ME2N (by number)
Use selection parameter WE101 for open GR
and scope of list EINT (scheduling lines)

Changing the default view for Line Items in an Auction.

Hello All,
We have a version 5 client who is asking for us to change the default view for line items in an auction.
Currently, if you have an auction setup, and you go to the Line Items tab, the default view is the "Basic View". The client would like to change the Default from "basic view" to "price view".
Is there a way to change this default in the system? Can this be configured using query groups? Any information would be helpful.

Hi wood cloud,
This is not possible, bcz there is no VLV for that drop down and we cant set it to the price view.
Thanks,
Ankur Goyal

Activation the Standard reports for SAP CRM IN BW 3.5 Version

hi guys
I am working on SAP BW 3.5 version
I have Activated the Satadard Reports for CRM Campaign, Lead, Opportunity in BW 3.5 Business Content
But I don't find the any single Standard Report in BEX.
I followed these Steps ;
BEX - Open - Queries - Info Area
If any One Knows please let me Know, Urgent Requirement
thanks in Advance
Suma

did u try to see that reports in metadata repository
login to bi system
enter RSA1
on the left panel select METADATA REPOSITORY
select LOCAL OBJECTS
then hit Query
TRY TO find ur REPORTS WITH TECHNICAL NAME
if it exists here than u shuld be able to seee in infocube.
if that doesnot make sense
go back to LOCAL OBJECTS SCREEN
hit INFOCUBE
locate ur infocube and select it
now everything with respect to infocube active and available is visible
all char catalog, keyfig catalog, queries etc....

Deleted Items Appearing on the FBL3n Report for Open Items

Similar Messages

Maybe you are looking for