Automatically role up reporting when manager leaves
Hi,
How do we automatically role employees up to the next level of reporting relations when a manager is terminated & they are not moved?
For eg: if my manager leaves, my reporting should automatically role up to my manager's manager.
Please advise if there is some configuration or standard report to perform this activity.
Thank you,
Manish
This is actually standard SAP behaviour. When a manager position is empty, SAP considers the manager to be the next manager up the hierarchy. This is how eg. MSS and reports for managers work. Also I believe the FM that finds managers work this way.
Note that for workflows, the switch WFLOW/VAPOS needs to be set for the system to skip the vacant manager positions and go one level up.
Kirsten
Similar Messages
-
Automatically refresh a report when it loads.
Hi,
I have a report created against the service request object which is accessed from the SR page using a weblink. However when the report is displayed it does not always show the current data. I have to click the 'refresh' link at the end of report to get it to display the correct data. Ideally I would like to avoid the user having to click 'refresh' so.....
Does anyone know how i could get the report to refresh automatically when it loads so that it always shows the current data?
Thanks in advanceContact C/C they will be able to help you with that
-
10.0.01 version doesn't sign-in automatically... i look up password manager, it seems to it saves usernames and passwords, when i try to visit that website i am not automatically signed in and when i reopen mozilla it keeps on asking main password to sign-in all the time... it happened after mozilla updated itself... please help about it.. (i dont have problems like this in Opera browser)
mozilla fills user name when i click but after that it asks for main password (whats the purpose of remembering passwords if it will ask for main password)
by the way main password for password manager is of course useful but it şs useful whenever i want to use it not all the time i open mozilla .
and not all the time i open a website or forum which i often use...
there were no problems before it updated itself...
please tell me the solutionmy problem is not related with using main password or not...
in former versions of firefox i was automatically signed in to websites without any click... it wasnt asking me to sign-in (because my usernames and passwords were remembered-and saved in password manager)
in this version they are remembered again but i have to write first 2-3 letters of my username and it remembers my username then it remembers password...
for example when i clicked twitter.com my account and my homepage as automatically opened, but in this version when i click twitter.com it opens the sign-in page and i write first 2 letters of my user name it remembers name and password and then i signin
(difference i was at where i want to sign in with one click--- but in new version 1click for webpage-1 click for clicking to username are-1-2 letter writing to find my user name-1 click to remember password-1 click to sign in) an addition: also if i am using main password i am entering main password and click to sign-in
This can be little problem to u, but it is really annoying problem, 9-10 clicks more for each webpage which i wanted mozilla to remember my usernames and passwords... it also asks main password if i am using...
if i want to visit 5-6 different websites it means 70-80 clicks more and 50-60 letters typing according to your main password .. (in opera and mozillas former versions it is just 5-6 clicks)
so main problem is the cookies were remembered in all the sessions but after it updated to v.10.0.1 expiry date of cookies of same websites that i visit are just for one session... it is not related with the websites and their servers that i visit because if so how can Opera remembers all the time... -
Performance Appraisal: Automatic updation in case of Manager's Transfer
Dear All,
In performance appraisal Manager(n) is Appraiser and Manager's Manager(n1) is included as further participant so that he can view appraisals of all employees who indirectly report to him. Now whenever this higher Manager (n1) is transferred new manager coming in can not view appraisals of his new department automatically. To enable this we update this further participant list manually of all old appraisal forms of his employees. Is there a way to do this automatically as such cases are quite a few and doing this manually is very time consuming.
Thank You.i havent seen any automatic update
in general if an employee changes the manager, the old manager
should be replaced in the document as well by the new manager to get
access to the entire document.
I would suggets to replace the appraiser in the documnet e.g. by
transaction PHAP_ADMIN so that the new manager sees the entire
document.
scenarios could be
solved using BAdI HRHAP00_ACC_HEADER. It'll enable you to change the
appraiser of the created appraisal documents when manager has been
changed. -
ALV grid list report when selected from selection screen
Hi folks,
I need to get ALV grid display in my list report when selected the interval values from the selection screen. If I change the values in list of ALV grid it needs to be updated when I press UPDATE pushbutton. The output of list should be in ALV grid display.I need sorting ,flitering,totaling functionality in the list output.
For example if I selected BUKRS = 100 and 200 in the selection screen ,I need to display the ALV grid list in below the selection screen as ALV grid display...
Its urgent as I am new to ALV grid functionality...
Thanks in advance..hi raja,
check with the folllowing code.
REPORT zca0m_zca0fcstftop NO STANDARD PAGE HEADING
MESSAGE-ID zcsv_usrtbl_maintain.
Type pools *
TYPE-POOLS : slis. " Used for ALV display
Tables
TABLES: zca0fcstftop,
dd04t, "R/3 DD: Data element texts
tactt. "Activities that can be protected
internal tables
DATA: BEGIN OF wa_zca0fcstftop .
INCLUDE STRUCTURE zca0fcstftop.
DATA: END OF wa_zca0fcstftop.
DATA: t_zca0fcstftop LIKE STANDARD TABLE OF wa_zca0fcstftop.
DATA: BEGIN OF i_fcode OCCURS 0,
fcode LIKE sy-ucomm,
END OF i_fcode.
*Record for variant selection
DATA : BEGIN OF ws_variant,
selected TYPE c,
variant LIKE ltdx-variant, "Variant name
text LIKE ltdxt-text, "Variant description
END OF ws_variant.
*Table for variant selection
data : itab_variant LIKE STANDARD TABLE OF ws_variant WITH HEADER LINE.
Variant selection pop-up global variables
DECLARATION OF TABLECONTROL 'VARIANT_CNTL' ITSELF
CONTROLS: variant_cntl TYPE TABLEVIEW USING SCREEN 0200.
LINES OF TABLECONTROL 'VARIANT_CNTL'
DATA: g_variant_cntl_lines LIKE sy-loopc.
DATA:grid1 TYPE REF TO cl_gui_alv_grid ,
g_custom_container TYPE REF TO cl_gui_custom_container.
Work fields
DATA: table_name LIKE dd02l-tabname, "To store table name
field_name LIKE dd03l-fieldname, "To Store Field Name
act_auth LIKE tactz-actvt, "To pass Activity ID
tab_maint LIKE dd02l-tabname, "To pass Table Name to be Maintd.
wg_confirm_ind, "To trap User responses
flag, "To trap changes made to an entry
f_copy, "To Identify 'COPY' Command Use
f_select, "To decide between Select-options
" and Internal Table
l_transaction_code LIKE tstc-tcode,
v_langu LIKE sy-langu,
v_repid LIKE sy-repid,
s_variant TYPE disvariant.
DATA: ok_code LIKE sy-ucomm.
DATA:selected_rows TYPE lvc_t_row ,
sel_rows TYPE lvc_t_row WITH HEADER LINE.
DATA:t_lines TYPE i.
Constants *
CONSTANTS :
c_x TYPE c VALUE 'X', " Constant 'X'.
c_f TYPE c VALUE 'F'. " Constant 'F'.
Parameters and Selection Options
*Selection Screen for table maintenance
*Selection option for Plant
SELECTION-SCREEN BEGIN OF BLOCK block1 WITH FRAME TITLE text-b01.
PARAMETERS: p_werks LIKE zca0fcstftop-werks OBLIGATORY.
SELECT-OPTIONS: s_prdfml FOR zca0fcstftop-product_family,
s_bmach FOR zca0fcstftop-base_machine,
s_factop FOR zca0fcstftop-factory_top,
s_optval FOR zca0fcstftop-option_value,
s_week FOR zca0fcstftop-week.
SELECTION-SCREEN END OF BLOCK block1.
SELECTION-SCREEN BEGIN OF BLOCK block2 WITH FRAME TITLE text-b02.
PARAMETERS : p_varant LIKE ltdx-variant. " ALV variant
SELECTION-SCREEN END OF BLOCK block2.
At selection screen *
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_varant.
PERFORM alv_variant_f4 CHANGING p_varant.
AT SELECTION-SCREEN ON p_werks .
Validating Plant on the selection screen
PERFORM validate_plant.
Initialization
INITIALIZATION.
Check Authorization for the Transaction
Authorization Check For T Code
SELECT tcode
INTO l_transaction_code
FROM tstc UP TO 1 ROWS
WHERE pgmna = sy-repid.
ENDSELECT.
AUTHORITY-CHECK OBJECT 'S_TCODE'
ID 'TCD' FIELD l_transaction_code.
IF sy-subrc NE 0.
MESSAGE e001 WITH l_transaction_code.
ENDIF.
v_langu = sy-langu. " language
v_repid = sy-repid . " abap Program name
Start Of Selection
START-OF-SELECTION.
CALL SCREEN 0050.
*& Form validate_plant *
Validating Plant on the selection screen *
FORM validate_plant .
DATA : l_werks LIKE t001w-werks. " Plant
IF p_werks IS NOT INITIAL.
SELECT SINGLE werks
FROM t001w
INTO l_werks
WHERE werks EQ p_werks.
IF sy-subrc NE 0.
MESSAGE e100(ra) WITH text-001 .
ENDIF.
ENDIF.
AUTHORITY-CHECK OBJECT 'Z_PP_PLANT'
ID 'ACTVT' FIELD '03'
ID 'WERKS' FIELD p_werks
ID 'TCD' FIELD l_transaction_code.
IF sy-subrc NE 0.
MESSAGE e000(oo) WITH 'No authorization for plant:'(e80) p_werks.
ENDIF.
ENDFORM. " validate_plant
*& Form get_data *
Get data *
FORM get_data .
SELECT * FROM zca0fcstftop
INTO TABLE t_zca0fcstftop
WHERE werks = p_werks
AND product_family IN s_prdfml
AND base_machine IN s_bmach
AND factory_top IN s_factop
AND option_value IN s_optval
AND week IN s_week.
ENDFORM. " get_data
*& Form fill_fcode
FORM fill_fcode USING value(p_0029).
i_fcode-fcode = p_0029.
APPEND i_fcode.
CLEAR i_fcode.
ENDFORM. " fill_fcode
*& Module STATUS_0100 OUTPUT
MODULE status_0100 OUTPUT.
SET PF-STATUS 'UPDATE'.
CLEAR flag.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module MODIFY_0100 OUTPUT
MODULE modify_0100 OUTPUT.
IF sy-ucomm = 'CHNG' OR
sy-ucomm = 'PICK'.
LOOP AT SCREEN.
CHECK screen-group1 = 'CHG'.
screen-required = '0'.
screen-output = '1'.
screen-input = '0'.
MODIFY SCREEN.
ENDLOOP.
ENDIF.
Check if you are in create mode & if yes then set the screen elements
as mandatory
IF ok_code = 'CREA'.
LOOP AT SCREEN.
CHECK screen-group1 = 'CHG'.
screen-required = '1'.
screen-output = '1'.
screen-input = '1'.
MODIFY SCREEN.
ENDLOOP.
ENDIF.
ENDMODULE. " MODIFY_0100 OUTPUT
*& Module Check_Exit INPUT
text
MODULE check_exit INPUT.
IF ( sy-ucomm = 'BACK' OR sy-ucomm = 'CANC' OR sy-ucomm = 'EXIT' ) AND
( flag = 'Y' ).
CALL FUNCTION 'POPUP_TO_CONFIRM_STEP'
EXPORTING
defaultoption = 'Y'
textline1 = text-008
textline2 = text-009
titel = text-004
cancel_display = ' '
IMPORTING
answer = wg_confirm_ind.
CASE wg_confirm_ind.
WHEN 'J'. "Yes
sy-ucomm = 'SAVE'.
CLEAR flag.
WHEN 'N'. "No
sy-ucomm = 'BACK'.
CLEAR flag.
ENDCASE.
ENDIF.
ENDMODULE. " Check_Exit INPUT
*& Module Exit_0100 INPUT
text
MODULE exit_0100 INPUT.
SET SCREEN 0. LEAVE SCREEN.
ENDMODULE. " Exit_0100 INPUT
*& Module USER_COMMAND_0100 INPUT
text
MODULE user_command_0100 INPUT.
CASE sy-ucomm.
WHEN 'SAVE'. "Save
Check to see if the user has the appropriate authorization
IF p_werks NE zca0fcstftop-werks.
could not update - not in selection
MESSAGE e000(oo) WITH 'Entry not within selection'.
SET SCREEN 0. LEAVE SCREEN.
PERFORM get_data.
ENDIF.
IF f_copy = 'X'.
INSERT zca0fcstftop.
IF sy-subrc = 0.
MESSAGE s004.
PERFORM initialize.
SET SCREEN 0. LEAVE SCREEN.
PERFORM get_data.
ELSE.
MESSAGE w005.
ENDIF.
ELSE.
MODIFY zca0fcstftop.
IF sy-subrc = 0.
MESSAGE s004.
PERFORM initialize.
SET SCREEN 0. LEAVE SCREEN.
PERFORM get_data.
ELSE.
MESSAGE w005.
ENDIF.
ENDIF.
PERFORM get_data.
WHEN 'BACK'. "Back
SET SCREEN 0. LEAVE SCREEN.
WHEN 'CANC'. "Cancel
SET SCREEN 0. LEAVE SCREEN.
WHEN OTHERS.
ENDCASE.
COMMIT WORK.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Form Initialize
FORM initialize.
CLEAR : table_name,
field_name,
wg_confirm_ind,
f_copy,
flag,
t_zca0fcstftop,
zca0fcstftop,
wa_zca0fcstftop,
i_fcode.
REFRESH: t_zca0fcstftop.
ENDFORM. " Initialize
*& Form alv_variant_f4
text
<--P_VARIANT text
FORM alv_variant_f4 CHANGING variant.
DATA: rs_variant LIKE disvariant.
DATA nof4 TYPE c.
CLEAR nof4.
LOOP AT SCREEN.
IF screen-name = 'VARIANT'.
IF screen-input = 0.
nof4 = 'X'.
ENDIF.
ENDIF.
ENDLOOP.
rs_variant-report = sy-repid.
rs_variant-username = sy-uname.
CALL FUNCTION 'REUSE_ALV_VARIANT_F4'
EXPORTING
is_variant = rs_variant
i_save = 'A'
IMPORTING
es_variant = rs_variant
EXCEPTIONS
OTHERS = 1.
IF sy-subrc = 0 AND nof4 EQ space.
variant = rs_variant-variant.
ENDIF.
ENDFORM. " ALV_VARIANT_F4
*& Module STATUS_0050 OUTPUT
text
MODULE status_0050 OUTPUT.
In this module Initialize the container and put the grid in it
DATA:grid_layout TYPE lvc_s_layo,
fieldcat TYPE lvc_t_fcat,
wa_fieldcat LIKE LINE OF fieldcat.
PERFORM set_auth.
SET PF-STATUS 'UPD_0050' EXCLUDING i_fcode.
SET TITLEBAR 'UPD_0050'.
IF g_custom_container IS INITIAL .
CREATE OBJECT g_custom_container
EXPORTING
container_name = 'FTDATA'.
CREATE OBJECT grid1
EXPORTING
i_parent = g_custom_container.
ELSE.
CALL METHOD grid1->free.
CALL METHOD g_custom_container->free.
CREATE OBJECT g_custom_container
EXPORTING
container_name = 'FTDATA'.
CREATE OBJECT grid1
EXPORTING
i_parent = g_custom_container.
ENDIF.
Every time refresh The variables
PERFORM initialize.
PERFORM get_data.
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
EXPORTING
i_structure_name = 'ZCA0FCSTFTOP'
CHANGING
ct_fieldcat = fieldcat.
grid_layout-grid_title = text-t01.
grid_layout-sel_mode = 'A'.
grid_layout-stylefname = 'CT'.
s_variant-report = sy-repid.
s_variant-username = sy-uname.
s_variant-variant = p_varant.
CALL METHOD grid1->set_table_for_first_display
EXPORTING
i_structure_name = 'ZCA0FCSTFTOP'
is_layout = grid_layout
is_variant = s_variant
i_save = 'A'
CHANGING
it_outtab = t_zca0fcstftop
it_fieldcatalog = fieldcat.
Create Object to receive events and link them to handler methods.
When the ALV Control raises the event for the specified instance
the corresponding method is automatically called.
CREATE OBJECT event_receiver.
SET HANDLER event_receiver->handle_button_click FOR grid1.
ENDMODULE. " STATUS_0050 OUTPUT
*& Module USER_COMMAND_0050 INPUT
MODULE user_command_0050 INPUT.
CALL METHOD grid1->get_selected_rows
IMPORTING
et_index_rows = selected_rows.
DESCRIBE TABLE selected_rows LINES t_lines.
IF t_lines > 1 .
MESSAGE e048(zcsv_sfdr).
ENDIF.
Clear Header
CLEAR wa_zca0fcstftop.
sel_rows[] = selected_rows .
READ TABLE sel_rows INDEX 1.
READ TABLE t_zca0fcstftop INTO wa_zca0fcstftop INDEX sel_rows-index.
CASE ok_code.
WHEN 'EXIT'.
PERFORM exit_program.
WHEN 'CREA'.
CLEAR zca0fcstftop.
ok_code = sy-ucomm.
zca0fcstftop-werks = p_werks.
CALL SCREEN 100.
WHEN 'COPY'.
MOVE wa_zca0fcstftop TO zca0fcstftop .
CLEAR wa_zca0fcstftop.
f_copy = 'X'.
CALL SCREEN 100.
WHEN 'CHNG'.
CHECK NOT wa_zca0fcstftop IS INITIAL.
MOVE wa_zca0fcstftop TO zca0fcstftop .
CLEAR wa_zca0fcstftop.
ok_code = sy-ucomm.
CALL SCREEN 100.
WHEN 'DELE'.
CHECK NOT wa_zca0fcstftop IS INITIAL.
CALL FUNCTION 'POPUP_TO_CONFIRM_STEP'
EXPORTING
defaultoption = 'N'
textline1 = text-005
textline2 = text-006
titel = text-007
cancel_display = ' '
IMPORTING
answer = wg_confirm_ind.
IF wg_confirm_ind EQ 'J'.
DELETE zca0fcstftop FROM wa_zca0fcstftop .
IF sy-subrc EQ 0.
MESSAGE s004.
ELSE.
MESSAGE e005.
ENDIF.
ELSEIF wg_confirm_ind EQ 'N'.
ENDIF.
ENDCASE.
CLEAR ok_code.
ENDMODULE. " USER_COMMAND_0050 INPUT
*& Form exit_program
FORM exit_program .
CALL METHOD g_custom_container->free.
CALL METHOD cl_gui_cfw=>flush.
SET SCREEN 0.
LEAVE SCREEN.
ENDFORM. " exit_program
*& Form set_auth
FORM set_auth.
REFRESH: i_fcode.
Check authorization for change
MOVE '02' TO act_auth. "02 --> Change
MOVE 'ZCA0FCSTFTOP' TO tab_maint.
AUTHORITY-CHECK OBJECT 'ZZ:TABLMNP'
ID 'ACTVT' FIELD act_auth
ID 'TABLE' FIELD tab_maint.
IF sy-subrc NE 0.
PERFORM fill_fcode USING 'CHNG'.
ENDIF.
Check for authorization for create
MOVE '01' TO act_auth. "01 --> Create
MOVE 'ZCA0FCSTFTOP' TO tab_maint.
AUTHORITY-CHECK OBJECT 'ZZ:TABLMNP'
ID 'ACTVT' FIELD act_auth
ID 'TABLE' FIELD tab_maint.
IF sy-subrc NE 0.
PERFORM fill_fcode USING 'CREA'.
PERFORM fill_fcode USING 'COPY'.
ENDIF.
Check for authorization for delete
MOVE '06' TO act_auth. "06 --> Delete
MOVE 'ZCA0FCSTFTOP' TO tab_maint.
AUTHORITY-CHECK OBJECT 'ZZ:TABLMNP'
ID 'ACTVT' FIELD act_auth
ID 'TABLE' FIELD tab_maint.
IF sy-subrc NE 0.
PERFORM fill_fcode USING 'DELE'.
ENDIF.
ENDFORM. " set_auth
*& Module check_change INPUT
MODULE check_change INPUT.
flag = 'Y'.
ENDMODULE. " check_change INPUT
regards,
vikas.
plz reward if helpful -
Firefox (33.0.1) tabs and windows get automatically all closed when I leave computer alone for some hours. No crash report get created. It never happens while I am working on the computer or surfing the web. I have Windows XP SP3.
-> Restart your System in Safe Mode
* http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx?mfr=true
-> Uninstall your current Firefox => [[Uninstalling Firefox]]
* DO NOT SELECT TO REMOVE USER DATA AND SETTINGS
* Restart your system
-> Do a MALWARE check with these Malware Scanning programs. You need to scan with all programs because each program detects different malware. Make sure that you UPDATE each program to get the latest version of their Databases before doing a Scan. Also, Close All other Applications (softwares) before Starting to Run Scans.
* Malwarebytes' Anti-Malware -> http://www.malwarebytes.org/products/malwarebytes_free
* SuperAntispyware -> http://www.superantispyware.com
* Ad-Aware Free Internet Security -> http://www.lavasoft.com/products/ad_aware_free.php
* Spybot Search & Destroy -> http://www.safer-networking.org/en/index.html
* Anti-Rootkit Utility '''TDSSKiller''' -> http://support.kaspersky.com/faq/?qid=208283363
-> [[Installing Firefox on Windows]]
Check and tell if its working. -
SSRS 2008 Production orders created report, when I added item description some how cost group id is not working ,
my costgroup id did not break into labor , only Mat Cost showed in the total,
my query is as below, did I link the wrong field, I want to show Labor total also
can some one suggest what I did wrong .
any advise will be great
SELECT PRODTABLE.PRODID, PRODCALCTRANS.COSTGROUPID, PRODTABLE.QTYCALC, PRODTABLE.PRODSTATUS, PRODCALCTRANS.COSTAMOUNT,
PRODCALCTRANS.COSTMARKUP, PRODCALCTRANS.REALCOSTAMOUNT, PRODCALCTRANS.CALCTYPE, PRODTABLE.DATAAREAID, PRODCALCTRANS.KEY3,
PRODCALCTRANS.CONSUMPVARIABLE, PRODCALCTRANS.REALCONSUMP, PRODTABLE.ITEMID, PRODTABLE.SCHEDDATE, PRODTABLE.FINISHEDDATE,
PRODCALCTRANS.KEY1, PRODCALCTRANS.TRANSDATE, PRODCALCTRANS.QTY, PRODCALCTRANS.KEY2, PRODCALCTRANS.COLLECTREFLEVEL,
PRODCALCTRANS.LINENUM, INVENTTABLE.ITEMNAME, INVENTTABLE.ITEMID AS Expr1, PRODTABLE.INVENTTRANSID
FROM PRODTABLE INNER JOIN
PRODCALCTRANS ON PRODTABLE.PRODID = PRODCALCTRANS.PRODID AND PRODTABLE.DATAAREAID = PRODCALCTRANS.DATAAREAID INNER
JOIN
INVENTTABLE ON PRODCALCTRANS.DATAAREAID = INVENTTABLE.DATAAREAID AND PRODCALCTRANS.KEY1 = INVENTTABLE.ITEMID
WHERE (PRODTABLE.PRODSTATUS = 7) AND (PRODTABLE.DATAAREAID = N'AR1') AND (PRODTABLE.ITEMID = @itemid) AND
(PRODTABLE.FINISHEDDATE >= @Paramfromdate) AND (PRODTABLE.FINISHEDDATE <= @Paramtodate) AND (PRODCALCTRANS.COLLECTREFLEVEL
= 1) AND
(PRODCALCTRANS.CALCTYPE >= 0)Hi Bitia,
As per my understanding, after you add Item field to the report, it does not calculate total of matl group, right? If that is the case, please refer to the following steps to troubleshoot the problem:
Modify the dataset used to retrieve data, delete the fields will not be used in the report.
Run the query in SQL Server Management Studio (SSMS) to make sure that there is data for matl cost group.
Make sure that row group and totals are correctly added.
In addition, do you want to add Finished date to page header? If that is the case, we can use ReportItem to achieve the goal. Please refer to the following steps:
In design surface, right-click the report and click Insert, then click Page Header.
Drag Text Box from Toolbox to page header.
Right-click inside of Text Box, then click Expression.
In the expression text box, type the code like below:
=ReportItems!FinishedDate.Value
If the problem remain unresolved, please provide the screenshot of the report in design view, the following screenshot is for your reference:
Reference:
ReportItems Collection References
Adding Grouping and Totals
Thanks,
Wendy Fu -
Hi,
I have created User defined form. Now i have to display report when click on Preview button (Same as Standard document).
Can we use report & layout manager to display report.
Regards,
PravinHello
possible with development, and it is pending from the B1 version.
Easy solutions are:
- 8.81 you can use Crystal Reports and PLD
- 2007 you can use PLD only or CR integration addon
in Crystal:
- You can create your layout and you can import into the system as report (not layout) into a specific folder
- When you press the print or print preview button (eg menu action is indicated, menu id "520", "519"), then you can find the crystal report in the OCMN table with the following query
select MenuUID from OCMN where Name = N'YOUR_REPORT_NAME'
- next step is call the report with ActivateMenuItem and fill the parameters.
Complete code for crystal
Dim oRs As SAPbobsCOM.Recordset = oCompany.GetBusinessObject(BoObjectTypes.BoRecordset)
Dim sQuery As String
Dim sMenuID As String
sQuery = "select MenuUID from OCMN where Name = N'YOUR_REPORT_NAME"
oRs.DoQuery(sQuery)
If oRs.Fields.Count > 0 Then
sMenuID = oRs.Fields.Item("MenuUID").Value.ToString
m_SBO_Application.ActivateMenuItem(sMenuID)
Dim oForm As SAPbouiCOM.Form = SBO_Application.Forms.ActiveForm
oForm.Items.Item("1000003").Specific.String = docentry
m_CrystalCriteriaFormID = oForm.UniqueID
oForm.Items.Item("1").Click(BoCellClickType.ct_Regular)
Else : m_SBO_Application.MessageBox("NO PRINTING LAYOUT EXISTS!")
End If
In PLD, the logic is the same, but you must activate the User Queries print layout, and locate the report in the matrix.
Regards
János -
Error Crystal report When viewed through SAP B1
Dear Experts
SAP B1 8.8 PL 16,SQL 2008
I am facing error (Unable to retrive data from database)(Vendor code-156) while accessing Crystal report from client machine throgh SAP B1.I have imported Crystal report through manage layout.The crystal reported is in shared in SAP server B1 SHR folder.I am able to access data from crystal report when viewed otherwise.When accessed crsytal report through SAP b1 on SAP Server crystal report is working fine.
Thanks & Regrds
Saurabh LambaHi Saurabh Lamba,
Go To Administration / System Initialisation / Authorisation / General Authorisation & Set Authorisation for user.
If you have to Set Authorisation for user allready then follow this steps.
1.Restore Database as Test Company.
2.Export Report From Live Company.
3.Import this Report in Test Company as different name.
4.Export Report from Test Company have you Imported as deifferent name.
5.Again Import this Report in Live company as different name
I don't know what's the logic behind it.
Thanks,
Srujal Patel -
Bug report: Energy Manager causes slow performance...
Very slow Windows Startup..
Energy Manager's plans and the problem occured using any plan as I remember, and it wasn't an issue with the maximum processor state. I had heavy disk usage, especially access to the Page File, which is what the person in the second link I posted also described. CPU usage was low. The disk usage was seemingly not related to Energy Manager (Chrome was usually the worst), but removing Energy Manager completely resolved the problem. If you would find it helpful. I'm quite confident that even with Maximum Processor state at %100, CPU usage was low when it was slow, and that disk access was the culprit.
previously have use 1.0.0.31 or 32 not sure.
Windows 8.1
Im using Lenovo Energy Management Driver
1.0.0.28
4.6.2014I actually have the same problem. Sorry to work on a old thread, but...
I've got my Lenovo B50-70 less than 1 month ago, and had switched it to SSD and had set everything up and is working perfectly. However there are a bunch of lenovo programs that came pre-installed. This computer is used mainly for work and I really don't like programs that suddenly pop-up and ask you to do stuff, as it is quite distracting, and with Lenovo Energy Manager being one of them so I removed it. (I did do some research before I remove...)
Everything was fine, until when I try to switch on my wifi (I usually have it off, as I use LAN most of the time)... For the B50-70 there is a airplane button on F7, which allow the user to switch wifi and bluetooth on/off. That button was unresponsive... After some digging it is actually related to the power energy manager being removed. So I've downloaded the latest version from Lenovo and it was working again...
However though, whenever I start my computer it is taking so long to start... And I tried uninstalling the power energy manager and it solved the problem... And I am stuck with either having no wifi on/off ability or a really slow boot, which loses the whole purpose of the SSD. After you enter your username and password it originally takes around 5~10 seconds to login, now it takes over 1 minute.
I have found this other link, which says Lenovo Power Manager having the same problem.
https://forums.lenovo.com/t5/ThinkVantage-Technologies/Bug-report-Power-Manager-causes-slow-performa...
There is a solution, which you can change the registry to switch a function off. I've tried it and it didn't work, which is not surprising as it's a different program.. But I am hoping that Lenovo can provide a similar solution for Lenovo Energy Manager... -
Role analysis report not displaying data
Hi experts,
I'm trying to get data out of all reports from the dashboard and so far all of them work except for the Role Analysis report. When I execute the report all information comes blank and under "Number of Roles Analyzed" shows 0. Is there any way to farther test this report? I see a lot of information on the community but mainly the solutions are "execute job sycn" and check parameter 1025 for default ruleset. Is there any other thing I can do to get results here?
Note: I also try generating all roles, running an all system risk analysis and just fyi SOD is working for User and Role level.Screen is attach, as far as steps go well after running Authorization Synch, Repository Synch and Action Usage Synch from SPRO I went to NWBC ->Reports & Analytics and under Access Dashboards I click on "Role Analysis" and I get the attach screen. All the other reports under Access Dashboards works (except for "Alerts") but Im guessing thats because I dont have any alerts or something like that. Any help is always appreciated
-
Is there a way to have bookmark folders automatically collapsed in Safari when adding bookmarks? This would be a huge convenience in navigating to the right folder w/o having to deal with an eye chart of a folder tree.
Myself as well...
I think it is a tremendous problem. Im my case it is extremelly important to manage, organize and sort favorites.
I am new to Mac and safari... and I spent a lot of time researching a solution for that thinking it was me that couldnt find this option. I like to use safari because of the "gestures". This is great. But when it comes to favorites, safari is a nightmare!!!
Also, I use to like the option in Firefox that we can have the leftside bar with the favorites and navigate to the links in the right. In safari the links are open in the full page. And then we need to come back to the favorite everytime.
I would be glad if someone could come out with good solution or suggestions how to deal with it in fafari.
Regards.
Miro -
OBIEE SSO enabling and role based reporting
Hi,
I had installed SOA10.1.3.1.0 and OBIEE10.1.3.4.0 already on my WINDOWS. I understand that I need to install 10.1.4 infrastructure to enable SSO in OBIEE, can you please tell me what is 10.1.4 infrastructure? is it equivelent to Oracle Identity Management Infrastructure and Oracle Identity Federation 10.1.4? I tried to download this from OTN since last night, but the page is always unaccessible. Where can I download 10.1.4 infrastructure except otn?
I have another question regarding to the role based reporting with SSO. We want users to see different reports based on their roles once they login. What options do we have to implement this? From my understanding, we need to maintain a user role mapping table in our database, create groups in OBIEE and map the user role with the group in OBIEE? Is it true? Are there other options? Is there a existing product we can use to implement this?
Thanks,
Menghave a look on page 137 and further http://download.oracle.com/docs/cd/E10415_01/doc/bi.1013/b31770.pdf
-
This is what happens when I leave the computer idle for a while and the Windows automatic maintenance starts:
Driver file Description ISR count DPC count Highest execution (ms) Total execution (ms)
ntoskrnl.exe NT Kernel & System 0 50764 0,235854
332,950426
A DPC spike is generated by ntoskrnl.exe causing drop outs in real-time streams.
JTSHi Fjtorsol,
We hope your issue has been resolved, if you've found solution by yourself. you could share with us and we will mark it as answer.
This high Deferred Procedure Call (DPC) latencies are usually caused by certain drivers, if it is caused by automatic maintenance, please re-check your task schedule which is marked as “when computer is idle”. As what has been suggested by MVP ZigZag, please
use the Microsoft Windows Performance Analyzer from the Windows Assessment and Deployment Kit (ADK) to identify the cause of any DPC latency spikes.
https://www.microsoft.com/en-gb/download/details.aspx?id=39982
DPC CPU Usage Summary Table will open containing a list of drivers/program. This list is already correctly sorted (by the Actual Duration column). The process on the very top of the list is therefore likely to be the cause of your problem.
Regards
D. Wu
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
How to increase font size in the report when emailed as PDF
How do I increase the font size of the report when I distribute the report as PDF to the users. I tried using different paper sizes in the LayOut tab in Broad Caster and Orientations. When I open the PDF from the mail I see the report shrinked and not readable, but when I magnify the report the numbers are visible with no loss in quality. I cannot give the users to print a shrinked PDF file. I would like to see a visiable font and print the same size what I see.
The size of the font is increased by selecting a bigger page size while emailing. This will automatically increase the size of the page.
Maybe you are looking for
-
Hi Friends , I had configared CIN for vendor and material details in chapter ID , but when i do GR with reference to perticular PO nummber , the excise tab is not appearing . Firest time i am working on CIN , configarion . I don't have overall idea o
-
Hi, I have just purchased audio books and none have been downloaded, or show as if they have been downloaded to my account. I plugged in my Nano and it didnt synchrose as it usually does. Anyone know why or what I could do to rectify the problem.
-
How the upgrade to Creative Cloud happens when you are already a signed member of Typekit?
Hello everybody. I have a signature for Typekit. When I purchase a Creative Cloud the price I had payed is discounted? How the upgrade to Creative Cloud happens when you are already a signed member of Typekit? Thanks
-
Code Editor - Navigation through Ctrl + , Ctrl +
Hi, Open Code Editor or SQL Worksheet and paste the following example line: "piRBDKBTabKnt piRBDKBTabKnt piRBDKBTabKnt" In SQL Developer version 3.2.2 when I'm moving cursor in the line by pressing Ctrl+ > (right arrow) or Ctrl + < (left arrow) then
-
Redraw issues after FLA imported to Flash, and Compiled in Air
I created a test file in inDesign. It has 3 pages. The pages are pretty simple. Though there are some clipping paths and animation. I ported the filed to Flash, as a FLA. I added video in Flash, and some more animation. I added code so the file will