Averaging a value of a range from prior year
Hi our requirement is :
Account1-> Budget = Avg of Account1 of prior year from Jun to Mar ->Actual+ Avg of Account1 of prior to prior year for Apr & May->Actual
I tried with @Avgrange & @ Prior but without success.
Can anyone provide a soulution?
Thanks in advance..
Not sure how robust\elegant you need your solution (is it a one-off seeding exercise?)
Anyway, something like this should work (i'm sure there are more clever ways out there if that's what you need)
FIX(Budget, etc)
Account1 = (@SUMRANGE(Account1->PriorYear,Jun:Mar) + @SUMRANGE(Account1->PriorPriorYear,Apr:May)) / 12;
ENDFIX
or if you are seeding a budget from Actuals would work across a range of accounts.
FIX(AccountList)
Budget = (@SUMRANGE(Actual->PriorYear,Jun:Mar) + @SUMRANGE(Actual->PriorPriorYear,Apr:May)) / 12;
ENDFIX
Similar Messages
-
Clearing of down payments on assets from prior year
Hello,
we have the following problem with an Asset under Construction (AuC) that has been migrated from a legacy system with down payments in a prior year.
Migration has taken place in 2007 (within the year). The down payment has not been cleared in 2007, but left on the asset for 2008. The clearing of the down payment on vendor side has already taken place in 2007.
When the AuC shall now be settled to a final asset via AIBU, the error message AW605 "Down payment to recipient YYYY area 01 amount XXXX not cleared" appears.
When the down payment on the Asset under Construction shall be cleared first with transaction ABSO (TType 181 "Clearing of down payments from current year"), the following error message appears: AA571 "Not possible to post down payment clearing. There are no down payments".
In our SAP Version 6.0 there is NO transaction type "Clearing of down payments from prior year", though.
Would appreciate any indication how to deal with the issue now - do we need to create a special transaction type for this purpose? If yes, how to configure the settings so that SAP knows to clear down payments from prior year?
Thanks very much in advance for any help!
GabiI replied to your second post
But my question is then how does the down payment appears in the CJI3 report
Also, I am aware of your initial post. I feel, the details you gave is insufficient. You have just said there are two down payments made against a PO one is reflecting in WBSE another one is not. It will be difficult for others to suggest you a proper solution, You will have to give more detials as how you made the two down payments and you should tell us apart from appearing in WBSE what are all the other differences ..etc., You should give as much details as possible. -
Scope statement for Change From Prior Year
Hello All,
I have to create Current Year, Prior year and change from Prior year for all the measures. I was able to creat current Year and Prior Year calcuation with scope statemnet. But I could not do the same for Change from Prior year. I am getting 0 for
all the months.
Here is what i have:
SCOPE([LABEL].[LABEL].&[ChangeFromPY])
THIS=
AGGREGATE(
[DATE DT].[Date_Hierarchy].CURRENTMEMBER,
[LABEL].[LABEL].&[Current Year]
AGGREGATE(
PARALLELPERIOD
[DATE DT].[Date_Hierarchy].[Year], 1, [DATE DT].[Date_Hierarchy].CURRENTMEMBER),
[LABEL].[LABEL].&[Prior Year]Hi Om25,
According to your description, the Prior year calculation works on Excel, however, it not works when creating dashborad in performance Point, right? In this case, you can create separate measures for Prior Year in Cube, and use it in performance Point directly.
Here is a link that might helpful for you, please see:
http://www.bidn.com/blogs/cprice1979/ssas/2473/fun-with-mdx-ndash-part-3-ytd-and-prior-ytd-calculations
Regards,
Charlie Liao
TechNet Community Support -
Please help. I have a matrix report. In the report I have row group PO Type. One the Column groups I have a parent group by Fiscal Year, and then a child group by Month. When I run the report, I get two years of data back broken
out by month. Please see below.
Now here is where I am getting stuck. I need to take the variance between the current month of the current year, from the same month of the prior year. So I need to show the difference between Oct , 2014 from Oct, 2013. November, 2014 from November
2013... etc. etc.
In the example below, how do I create a column or row showing the variance for Contracts for October 2014. I need to take the contracts for October 2014 which is 3 and subtract that from October 2013 which is 8. Any suggestions? How do I do that
for each month? Then I need to do it for the quarter... then the year? But I'll be happy if I can just get the month working first.
Any help will be appreciated.
here is what my rdl file looks like.
Here is what my report looks like when I render it.Hi Adrian_s2012,
According to your description, you want to compare values for the month of current year with the month of prior year and get the variance. Right?
In Reporting Services, we don't have any function to get this "Year to Year" Growth. In this scenario, if you data source is a cube, we suggest you use Analysis Services to achieve your requirement. If this data source is just from database, it will be hardly
to calculate the variance because we need to compare the values within every two different column group and matrix generate adjacent columns one by one. Even we make it by using custom, every time executing the long code when generating result
in a cell will reduce a lot of performance, we really don't suggest to do that in SSRS. Here is a thread with much easier requirement, please take a reference of that:
http://social.msdn.microsoft.com/Forums/office/en-US/842e2dcb-d949-4297-9d91-eac989692cb5/difference-between-the-grouped-column?forum=sqlreportingservices
If you have any question, please feel free to ask.
Best Regards,
Simon Hou -
It appears that the iPad, and also the iPhone do not retain information for prior years, such as appointments, etc. Unless there is an archive feature, which I have not found, valuable information is lost. Any help would be appreciated.
Thank you so much to JimHdk. A really simple solution, but I guess I am not totally familiar with my iPad. I have a high learning curve with my iPhone also.
-
Average of values in variable ranges
Post Author: Graybane
CA Forum: Charts and Graphs
I am trying to generate a trend values that use variable ranges. For instance, I want a 12 month trend developed from preceeding 1 year + 1 month average, then preceeding year + 2 months average, then preceeding year + 3 months average and so on. I only want the values for the report for the 12 monthly values. This is all complicated by being a group function. Basically I am looking at priorities for requests in a single field and developing how long it takes to resolve the request based on another field which is what is used to develoe the averages for the trend. I have tried several methods and never gotten a good trend. The total average is correct if I do not do any weighting. Has anyone had any success with this? Are there any examples I can look at. Does anyone have any recommendations? Thanks for any helpI'm not entirely following you, Visakh, but I have a SQL Task setup in which I have an expression that makes a call to a db2 database such as the abbreviated set example below. The list of IDs in the IN statement must come from another SQL Server
database. In the past I have gotten the list of IDs, put them in a recordset and then put that in a for loop to iterate and make one call to db2 for each and every ID. The single ID example can literally take days to run for 100,000 IDs.
Therefore, I want to pull the entire set of results back at one time via a single (or at least fewer calls than there are IDs) DB2 call using 'in' instead. Maybe I am overlooking something but I don't quite see how your example will get me where
I want to go.
Set Example
SELECT
A,
B
FROM
Table 1,
Table 2,
WHERE
Joins
AND PRSNEUP.ID in ( This is where I want a list of IDs )
Single ID Example
SELECT A,
B
FROM
Table 1, Table 2,
WHERE
Joins AND PRSNEUP.ID = ( VariableContainingASingleID -
Spread Data Over Multiple Months & Years with Data from Multiple Years
Hello Everyone,
I have a complex calculation for spreading values over several months spanning mulitle years. Because we have a 36 month rolling Forecast, a more sophisticated calc is required as opposed to hard coding months or years.
Heres the description:
Users enter the following data,
FY11 BegBalance Number of BOD Members 10
BOD Options Vesting Months 20
BOD Options Accounting Value 10
BOD Options- Number of Shares 100
BOD Grant Month Aug
FY12 BegBalance Number of BOD Members 5
BOD Options Vesting Months 10
BOD Options Accounting Value 5
BOD Options- Number of Shares 200
BOD Grant Month Oct
FY13 BegBalance Number of BOD Members 20
BOD Options Vesting Months 8
BOD Options Accounting Value 20
BOD Options- Number of Shares 100
BOD Grant Month Feb
Based on the above;
"BOD Stock" is calculated as following/month=Number of BOD Members*BOD Options Accounting Value*BOD Options- Number of Shares/ BOD Options Vesting Months
Start month for the above is based on "BOD Grant Month". So, for instance considering data for FY11:
The total "BOD Stock" value is $10000 (originating from FY11) with start month of AUG in FY11 and the number of months to spread over is 20 months. So, essentially the "BOD Stock" per month (originating from FY11) is $500 starting from AUG FY11 to Mar FY13.
Similarly, the total "BOD Stock" value is $5000 (originating from FY12) with start month of OCT in FY12 and the number of months to spread over is 10 months. So, essentially the "BOD Stock" per month (originating from FY12) is $500 starting from OCT FY12 to JUL FY13.
The challange I am facing is because of the number of months to spread. Because I have data to spread from multiple years and each year's data spills into the following years, each year should accumulate data from prior years. For instance;
FY11 should include only FY11
FY12 should include FY11 and FY12
FY13 should include FY11, FY12 and FY13.
Could anyone suggest a smarter way to do this without writting code for each year, maybe using @MDALLOCATE function? The following shows how data should be spread and accumulated.
BegBalance Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec Period
FY11 Number of BOD Members 10 #mi #mi #mi #mi #mi #mi #mi #mi #mi #mi #mi #mi #mi
BOD Options Vesting Months 20 #mi #mi #mi #mi #mi #mi #mi #mi #mi #mi #mi #mi #mi
BOD Options Accounting Value 10 #mi #mi #mi #mi #mi #mi #mi #mi #mi #mi #mi #mi #mi
BOD Options- Number of Shares 100 #mi #mi #mi #mi #mi #mi #mi #mi #mi #mi #mi #mi #mi
BOD Grant Month Aug #mi #mi #mi #mi #mi #mi #mi #mi #mi #mi #mi #mi #mi
BOD Stock 10000 #mi #mi #mi #mi #mi #mi #mi 500 500 500 500 500 #mi
FY12 Number of BOD Members 5 #mi #mi #mi #mi #mi #mi #mi #mi #mi #mi #mi #mi #mi
BOD Options Vesting Months 10 #mi #mi #mi #mi #mi #mi #mi #mi #mi #mi #mi #mi #mi
BOD Options Accounting Value 5 #mi #mi #mi #mi #mi #mi #mi #mi #mi #mi #mi #mi #mi
BOD Options- Number of Shares 200 #mi #mi #mi #mi #mi #mi #mi #mi #mi #mi #mi #mi #mi
BOD Grant Month Oct #mi #mi #mi #mi #mi #mi #mi #mi #mi #mi #mi #mi #mi
BOD Stock 5000 500 500 500 500 500 500 500 500 500 1000 1000 1000 #mi
FY13 Number of BOD Members 20 #mi #mi #mi #mi #mi #mi #mi #mi #mi #mi #mi #mi #mi
BOD Options Vesting Months 8 #mi #mi #mi #mi #mi #mi #mi #mi #mi #mi #mi #mi #mi
BOD Options Accounting Value 20 #mi #mi #mi #mi #mi #mi #mi #mi #mi #mi #mi #mi #mi
BOD Options- Number of Shares 100 #mi #mi #mi #mi #mi #mi #mi #mi #mi #mi #mi #mi #mi
BOD Grant Month Feb #mi #mi #mi #mi #mi #mi #mi #mi #mi #mi #mi #mi #mi
BOD Stock 40000 1000 6000 6000 5500 5500 5500 5500 5000 5000 #mi #mi #mi #mi
Appreciate your inputs!
Edited by: user10678366 on Oct 12, 2010 3:21 PMWhy not use substitution variables for Years? you could have something like &Year1, &Year2, &Year3
Cheers -
How to make labview program to get average value of 200 reading from multimeter (by using loop)
Hello
How to make labview program to get average value of 200 reading from multimeter (I using using loop) to read voltage from mulmeter but I like to get average value of all of 200 reding how can I do that?
Thanks
Wee
Solved!
Go to Solution.Another idea with less programming - take advantage of the "free" array that comes with a Chart - i.e. the History Data.
1) Wire your DMM data to a Chart. (You can set the chart to invisible if you don't plan on using it in the GUI).
2) Set the Chart History Length to 200 (right click on the chart, click on Chart History Length...)
3) On the block diagram, use the History Data Property Node, wire it to Mean.vi, and you're done.
Easiest running average ever.
Message Edited by Broken Arrow on 04-07-2010 11:36 AM
Richard
Attachments:
EasyAvg.jpg 8 KB -
How to Pass Multiple Value Range From Query ?
Hi,
I have searched over SDN to find about how do we pass multiple value ranges from Query to SAP ODATA?
But I have not found suitable answers so I am posting it here.
If we need to pass a date parameter in Query which has a multiple range like sales orders created date between 03/02/2014 to 05/07/2014.
How do we phrase it in Query ?
I tried as below but the IT_FILTER_SELECT_OPTIONS of /IWBEP/IF_MGW_APPL_SRV_RUNTIME~GET_ENTITYSET does not get filled up with the parameters
How do we pass multiple values in Query?
http://ctnhsapapp16.corp.ken.com:8000/sap/opu/odata/sap/ZCHAKRABK_MAINT_ORDERS_SRV/Maint_Orders?$filter=Maint_Plant eq 'US19' and B_st_dt gt datetime'2015-02-01T00:00:00' and B_st_dt lt datetime'2015-02-28T00:00:00'
Thanks in Advance.
KC.Hi,
I Have Found solution to the Query posted above.
Please find the URL's below for more clarifications.
Revert for any suggestions please.
http://ctnhsapapp16.corp.ken.com:8000/sap/opu/odata/sap/ZCHAKRABK_MAINT_ORDERS_SRV/Maint_Orders?$filter=Maint_Plant eq 'US19' and ( B_st_dt ge (datetime'2015-02-01T00:00:00') or B_st_dt le (datetime'2015-02-27T00:00:00'))
http://ctnhsapapp16.corp.ken.com:8000/sap/opu/odata/sap/ZCHAKRABK_MAINT_ORDERS_SRV/Maint_Orders?$filter=Maint_Plant eq 'US19' and ( B_st_dt ge (datetime'2015-02-01T00:00:00') and B_st_dt le (datetime'2015-02-27T00:00:00'))
Thanks KC. -
Averaging an member of a range list of prior year
Hi our requirement is :
Account1-> Budget = Avg of Account1 of prior year from Jun to Mar ->Actual+ Avg of Account1 of prior to prior year for Apr & May->Actual
I tried with @Avgrange & @ Prior but without success.
Can anyone provide a soulution?
Thanks in advance..I think you might actually be better off using substitution variables for the years. MDShift works great but does not work in combination with other functions such as AVG or SUMRANGE. In some of my formulas, I use MDSHIFT and list out all the months instead of using a sum. It's pretty ugly but it does work. Here's a brief example:
IF (@ISMBR("JAN")).....
ELSEIF (@ISMBR("SEP")) (@MDSHIFT("ADMIN FEE"->OCT,-1,YEARS,)+@MDSHIFT("ADMIN FEE"->NOV,-1,YEARS,)+@MDSHIFT("ADMIN FEE"->DEC,-1,YEARS,)+@SUMRANGE("ADMIN FEE",JAN:SEP));
ENDIF
In the example, if the month I am calucating is September, I want to take the data from Oct through December of last year and add it with the data from January to September of the current year so that I had a true year's worth of data. Let me know if you'd like me to clarify further. Good luck. -
How to get top 11 values per date range
I want to get the top 11 values by date range.
Sample Data
CREATE TABLE SAMPLE_DATA
DOMAIN_NAME VARCHAR2(100),
QTD NUMBER,
LOAD_DATE DATE
-- Insert
BEGIN
FOR lc IN 1..20
LOOP
FOR ld IN 1..30
LOOP
INSERT
INTO SAMPLE_DATA VALUES
'DM_'
||lc,
round(dbms_random.value(0,1000)),
SYSDATE-ld
END LOOP;
END LOOP;
COMMIT;
END;
SELECT *
FROM
(SELECT DOMAIN_NAME,
QTD,
LOAD_DATE
FROM
(SELECT DOMAIN_NAME,
QTD,
LOAD_DATE
FROM SAMPLE_DATA
WHERE LOAD_DATE = TRUNC(SYSDATE-3)
ORDER BY QTD DESC
WHERE ROWNUM <=10
UNION ALL
SELECT 'Others' DOMAIN_NAME,
SUM(QTD) QTD,
LOAD_DATE
FROM
(SELECT DOMAIN_NAME,
QTD,
LOAD_DATE
FROM
(SELECT rownum rn,
DOMAIN_NAME,
QTD,
LOAD_DATE
FROM
(SELECT DOMAIN_NAME,
QTD,
LOAD_DATE
FROM SAMPLE_DATA
WHERE LOAD_DATE = TRUNC(SYSDATE-3)
ORDER BY QTD DESC
WHERE rn > 10
GROUP BY LOAD_DATE
ORDER BY QTD DESC
-- Result
DOMAIN_NAME QTD LOAD_DATE
Others 2888 24/03/13
DM_1 1000 24/03/13
DM_20 933 24/03/13
DM_11 913 24/03/13
DM_3 743 24/03/13
DM_13 572 24/03/13
DM_12 568 24/03/13
DM_9 564 24/03/13
DM_6 505 24/03/13
DM_5 504 24/03/13
DM_2 480 24/03/13
Please, Help me get in one query this result using a range of date.
e.g
using LOAD_DATE BETWEEN '24/03/13' AND '25/03/13'
DOMAIN_NAME QTD LOAD_DATE
Others 2888 24/03/13
DM_1 1000 24/03/13
DM_20 933 24/03/13
DM_11 913 24/03/13
DM_3 743 24/03/13
DM_13 572 24/03/13
DM_12 568 24/03/13
DM_9 564 24/03/13
DM_6 505 24/03/13
DM_5 504 24/03/13
DM_2 480 24/03/13
Others 1948 25/03/13
DM_1 807 25/03/13
DM_8 764 25/03/13
DM_7 761 25/03/13
DM_11 656 25/03/13
DM_18 611 25/03/13
DM_17 523 25/03/13
DM_14 467 25/03/13
DM_19 447 25/03/13
DM_15 437 25/03/13
DM_6 380 25/03/13 Thank you in advance.I got the solution. Just sharing.
I used analytic functions that make my job easy.
Sample Data
DOMAIN_NAME QTD LOAD_DATE
DM_1 807 25/03/2013
DM_1 1000 24/03/2013
DM_2 226 25/03/2013
DM_2 480 24/03/2013
DM_3 244 25/03/2013
DM_3 743 24/03/2013
DM_4 48 25/03/2013
DM_4 413 24/03/2013
DM_5 164 25/03/2013
DM_5 504 24/03/2013
DM_6 380 25/03/2013
DM_6 505 24/03/2013
DM_7 761 25/03/2013
DM_7 212 24/03/2013
DM_8 764 25/03/2013
DM_8 308 24/03/2013
DM_9 354 25/03/2013
DM_9 564 24/03/2013
DM_10 214 25/03/2013
DM_10 367 24/03/2013
DM_11 656 25/03/2013
DM_11 913 24/03/2013
DM_12 37 25/03/2013
DM_12 568 24/03/2013
DM_13 332 25/03/2013
DM_13 572 24/03/2013
DM_14 467 25/03/2013
DM_14 87 24/03/2013
DM_15 437 25/03/2013
DM_15 450 24/03/2013
DM_16 238 25/03/2013
DM_16 299 24/03/2013
DM_17 523 25/03/2013
DM_17 143 24/03/2013
DM_18 611 25/03/2013
DM_18 145 24/03/2013
DM_19 447 25/03/2013
DM_19 464 24/03/2013
DM_20 91 25/03/2013
DM_20 933 24/03/2013 Top 11 QTD of DOMAIN_NAME per Data Range.
SELECT *
FROM
(SELECT DOMAIN_NAME,
QTD,
LOAD_DATE
FROM
(SELECT LOAD_DATE,
DOMAIN_NAME ,
QTD,
(DENSE_RANK() OVER (PARTITION BY LOAD_DATE ORDER BY QTD DESC )) AS RANK_QTD
FROM SAMPLE_DATA
WHERE trunc(load_date) BETWEEN '24/03/2013' AND '25/03/2013'
WHERE RANK_QTD <= 10
UNION ALL
SELECT 'Others',
SUM(QTD) AS QTD,
LOAD_DATE
FROM
(SELECT LOAD_DATE,
DOMAIN_NAME ,
QTD,
(DENSE_RANK() OVER (PARTITION BY LOAD_DATE ORDER BY QTD DESC )) AS RANK_QTD
FROM SAMPLE_DATA
WHERE trunc(load_date) BETWEEN '24/03/2013' AND '25/03/2013'
WHERE RANK_QTD > 10
GROUP BY LOAD_DATE
ORDER BY LOAD_DATE ASC,
QTD DESC
DOMAIN_NAME QTD LOAD_DATE
Others 2888 24/03/2013
DM_1 1000 24/03/2013
DM_20 933 24/03/2013
DM_11 913 24/03/2013
DM_3 743 24/03/2013
DM_13 572 24/03/2013
DM_12 568 24/03/2013
DM_9 564 24/03/2013
DM_6 505 24/03/2013
DM_5 504 24/03/2013
DM_2 480 24/03/2013
Others 1948 25/03/2013
DM_1 807 25/03/2013
DM_8 764 25/03/2013
DM_7 761 25/03/2013
DM_11 656 25/03/2013
DM_18 611 25/03/2013
DM_17 523 25/03/2013
DM_14 467 25/03/2013
DM_19 447 25/03/2013
DM_15 437 25/03/2013
DM_6 380 25/03/2013 -
I need to validate Input List Of Values Field when Inserted From Bean
I've two view object EmployeeView and DepartmentsView
In Employee View I've changed Department_Id to Input List OF Values
I've created a bean to inset data into Employee Table
ApplicationModule am = ADFUtils.getApplicationModuleForDataControl("AppModuleDataControl");
ViewObject importedVO = am.findViewObject("EmployeesView");
try {
newEmp.setEmployeeId(new Number("3424));
newEmp.setFirstName("Test Fname");
newEmp.setLastName("Test Lname");
newEmp.setEmail("[email protected]");
newEmp.setPhoneNumber("4643131345");
newEmp.setJobId("AD_VP");
newEmp.setDepartmentId(new oracle.jbo.domain.Number(999));
} catch (Exception e) {
// TODO: Add catch code
System.out.println("inside Catch");
e.printStackTrace();
}I know that ADF validate Input list of values when inserting new value on it
when I've enabled the debugger I've found that
<ViewObjectImpl><buildQuery> [604] SELECT DepartmentsEO.DEPARTMENT_ID, DepartmentsEO.DEPARTMENT_NAME, DepartmentsEO.MANAGER_ID, DepartmentsEO.LOCATION_ID, DepartmentsEO.ISDELETED FROM DEPARTMENTS DepartmentsEO WHERE ( ( (DepartmentsEO.DEPARTMENT_ID = :vc_temp_1 ) ) )
<ViewObjectImpl><bindParametersForCollection> [605] Bind params for ViewObject: [com.test.model.views.DepartmentsEOView]AppModule.__LOCAL_VIEW_USAGE_com_test_model_views_EmployeesEOView_DepartmentsView_findByVC_12_LOV_DepartmentId_lov__filterlist__vcr___
<OracleSQLBuilderImpl><bindParamValue> [606] Binding param "vc_temp_1": 999
<ViewObjectImpl><processViewCriteriaForRowMatch> [607] VCs converted to RowMatch: ( (DepartmentId = :vc_temp_1 ) )
<ViewRowImpl><handleListBindingMismatch> [608] No matching row found for list binding:LOV_DepartmentId for ViewRow:oracle.jbo.Key[34235 ]
<ViewRowImpl><handleListBindingMismatch> [609] --- filterList ValueMap key:DepartmentId, value:999
<DCBindingContainer><internalRefreshControl> [610] **** refreshControl() for BindingContainer :com_test_view_testInsertPageDef
<JUCtrlHierNodeBinding><release> [611] released: ROOT node binding:noCtrl_oracle_adfinternal_view_faces_model_binding_FacesCtrlHierNodeBinding_2, value:EmployeesViewIterator
<JUCtrlHierNodeBinding><release> [612] released: ROOT node binding:noCtrl_oracle_adfinternal_view_faces_model_binding_FacesCtrlHierNodeBinding_2, value:EmployeesViewIterator
<DCIteratorBinding><releaseDataInternal> [613] Releasing iterator binding:EmployeesViewIterator
<ApplicationPoolMessageHandler><doPoolMessage> [614] **** PoolMessage REQ ATTACH LWS
<ApplicationPoolMessageHandler><doPoolMessage> [615] **** PoolMessage REQ DETACH LWS
<DCJboDataControl><initializeApplicationModule> [616] (oracle.adf.model.bc4j.DataControlFactoryImpl.SyncMode = Immediate
<DCBindingContainer><internalRefreshControl> [617] **** refreshControl() for BindingContainer :com_test_view_testInsertPageDef
<DCBindingContainerState><validateToken> [618] Process BindingContainer state token(decompressed state):BCST:=0%V%=NEmployeesViewIterator=-D-,
<this means that ADF tries to validate the input list of values "Department_Id" and didn't found any match
I need to through exception when I try to set Department_ID with invalid value "value not on range" like
newEmp.setDepartmentId(new oracle.jbo.domain.Number(999));I don't want to validate it manually as I've a lot of fields.
I need to through exception when try to
newEmp.setDepartmentId(new oracle.jbo.domain.Number(999));Thanks Timo
this is the code that I use
ApplicationModule am = ADFUtils.getApplicationModuleForDataControl("AppModuleDataControl");
ViewObject importedVO = am.findViewObject("EmployeesView");
EmployeesEOViewRowImpl newEmp = (EmployeesEOViewRowImpl)importedVO .createRow();
importedVO .insertRow(newEmp);
try {
newEmp.setEmployeeId(new Number("3424));
newEmp.setFirstName("Test Fname");
newEmp.setLastName("Test Lname");
newEmp.setEmail("[email protected]");
newEmp.setPhoneNumber("4643131345");
newEmp.setJobId("AD_VP");
newEmp.setDepartmentId(new oracle.jbo.domain.Number(999));
} catch (Exception e) {
// TODO: Add catch code
System.out.println("inside Catch");
e.printStackTrace();
} -
CURRENT YEAR SALES DATE PARAMATER AND PRIOR YEAR SAME DATE RANGE
I am pulling data from a SQL view dbo.view that has current and historical SOP data by line. The date paramater is a date range, uppr date and lower date formulas are in the report. I need to include prior year SOP data for the same prior year date range in the detail. I have tried adding the view in twice with no luck, just duplications. Ultimately I want to supress the detail and only show the totals by customer so it is comparitive. Thanks for your help. Jayne
OK
lets simplify it
get a test data source with some simple dates in it.
get the report logic working.
it looks like you have the right formula ideas but lets go for
@upperthisyear
@upperlastyear
@lowerthisyear
@lowerlastyear
then assuming a date field of {table1.date}
the record selection would be
if (@upperthisyeare > {table1.date} and @lowerthisyear < {table1.date}) or (@upperlastyeare > {table1.date} and @lowerlastyear < {table1.date}) then 1 else 0
I would test this by using it as a formula field with the test data. -
Problem inserting value in CLOB column from an XML file using XSU
Hi,
When I try to insert CLOB value into Oracle9i database from an XML document using XSU, I get an exception as below.
09:37:32,392 ERROR [STDERR] oracle.xml.sql.OracleXMLSQLException: 'java.sql.SQLException: ORA-03237: Initial Extent of specified size cannot be allocated
ORA-06512: at "SYS.DBMS_LOB", line 395
ORA-06512: at line 1
' encountered during processing ROW element 0. All prior XML row changes were rolled back. in the XML document.
All Element tags in XML doc. is mapped to columns in the database. One of the table columns is CLOB. That is the one that gives the above exception. Here is the xml...
ID - is autogenerated value.
<?xml version="1.0" ?>
<ROWSET>
<ROW num="1">
<ID></ID>
<SEQ>
GCATAGTTGTTATGAAGAAATGGAAGAAAAATGCACTCAAAGTTGGGCTGTCAGGCTGTCTGGGGCTGAATTCTGGTGTGACAGTGTGATGAAGCCATCTTTGAGCCTAAATTTGATAATGAGCCAGTCATGATCTGGTTGTGATTACTATAACAAGATTAAATCTGAATAAGAGAGCCACAACTTCTTTAAAGACAGATTGTCAAGTCATTACATGGAAGAGGGAGATTGCTCCTTTGTAAATCAGGCTGTCAGGCCAACTGAATGAAGGACGTCATTGTACAGTAACCTGATGAAGATCAGATCAACCGCTCACCTCGCCG
</SEQ>
</ROW>
</ROWSET>
Can anyone identify what's the problem.. and suggest a solution for this..?
Thanks in advance..
VijiWould you please specify the XDK verison and database version?
-
NAM 5.1 How to create Application with port range from cli?
Hello,
I can create new Applicaion with port range from GUI, but I can not do it from CLI
If I do it by CLI as a:
nam# application
nam# name mkst-cur-A
nam# match udp 16001-16009
nam# exit
then
nam# show application app-tag 268435576
custom:120 (268435576) mkst-cur-A
udp 16001
nam#
But if I do it by GUI and than
nam# show application app-tag 268435576
custom:120 (268435576) mkst-cur-A
udp 16001 - 16009
nam#
How to do it by CLI?Hi Alexey,
Sure, the function you're looking for is in the ANALYSIS panel under the "CUrve Fitting" palette-- it's called "Linear Mapping". You will need to create the desired X channel prior to calling this function, though, so you will probably need to use the ANALYIS function "Generate Numeric Channel" in the "Channel Functions" palette.
Brad Turpin
DIAdem Product Support Engineer
National Instruments
Maybe you are looking for
-
How can i change a low resolution photo into higher one without losing much quality.
I opened a photo and it has a poor quality, how can i fix it to a better one??
-
iTunes 11.1.4 will not install properly - windows 8.1, 64 bit. The only way I have found to recover is to restore my system. I have unistalled/reintalled iTunes two times. No success. iTunes 11.1.3.8 functions properly (following system restore).
-
Upgraded, Podcast library now says it's 3x larger
I upgraded yesterday, everything went smoothly, EXCEPT, my iTunes library has mysteriously grown. My music library is now about 70GB larger, and my podcast library went from about 26GB to 71GB. I have a separate hard drive just for music, 232GB forma
-
IPhone 4 freezes and will not restart or restore using iTunes.
iPhone 4 freezes and will not restart and cannot be restored using iTunes (unknown error 1602). My daughter's iPhone 4 did the same thing 10 days ago. Is this a software glitch? I replaced her phone, but I'm ready to switch to Android.
-
Can videos be embedded in power point presentations in keynote?
I have just purchased an APPLE MAC Pro. I have always used a PC and have numerous power point presentations with windows media videos embedded in the power point. Two questions: Can I transfer Windows video media from the PC to the Apple? Can I e