AWM dimension mapping - is it possible to load data from two input tables ?

Hello All
I have two tables ProductFamily (parent level) and Products (child level).
I want to load a dimension from these two tables where the parent-child relationships are maintained (I am using AWM).
I created a mapping with these two tables as input, but the data loaded does not maintain the relationships.
So how do I do that? Is it possible to load dimensions where different levels get data from multiple tables?
Is there any type of joiner available in AWM?
thanks
Few Notes:
- I do not want to use OWB here as my data is clean
- In AWM, When I loaded the data from a single view which contained data from both input tables, it worked fine. But this is my worst case option.

You should use the Snowflake Dimension option in the Dimension mapping screen for the Product Dimension (as opposed to the default dimension mapping style - star schema).
This will modify the mapping inputs to include a separate parent level key for each hierarchy/level i.e. for each hierarchy/level (unless topmost level of hierarchy), you need to specify the parent level key in addition to the current level key, code/name/description/other attributes etc.
You can do the mapping in either .... use icons at the top of the mapping screen.
the drag/drop mode by dragging the relational column onto dimension model - hierarchy/level/attribute
-or-
the table expression mapping mode which gives the same effect.. dragging a column onto an attribute sets the expression in <schema>.<table>.<column> format.
HTH
Shankar
Note1: Complete the mapping in one go.. Switching b/w the mapping modes cause the mappings to be reset.
Note2: Assume your data is correct, foreign key to parent level table: ProductFamily exists in child level table: Products.

Similar Messages

Confirmed Dimensions. OBIEE Not able to pull data from two fact tables.

Hi Experts,
I have a very simple set up of Star Schema with two fact tables and 1 dimension. Both fact tables joined to the dimension at the same level.
When i pull a column from both fact tables and the dimension table in OBIEE, it has to create simple SQL like below:
select FACT1.column1,
Fact2.Column1,
Dim.Column1
from FACT1, FACT2, DIM
where FACT1.ID = DIM.ID and FACT2.ID = DIM.ID
but instead it creating a query in a very complex way:
select case when D1.c2 is not null then D1.c2 when D2.c2 is not null then D2.c2 end as c2,
     D1.c1 as c3,
     D2.c1 as c4
from
     (select FACT1.Column1 as c1,
               DIM.Column1 as c2
          from
               DIM T1287863,
               FACT1 T1287945
   where (DIM.ID = FACT1.ID)
       ) D1 full outer join (
        select FACT2.Column1 as c1,
               DIM.Column1 as c2
          from
               DIM,
               FACT2
          where ( DIM.ID = FACT2.ID)
     ) D2 On isnull(D1.c2 , '1') = isnull(D2.c2 , '1') and isnull(D1.c2 , '2') = isnull(D2.c2 , '2')
I even tried setting the levels for both the fact tables and it still creates the query in avove way. Any thoughts on this will be vary helpful.

Subramanian,
see below the code we're using for the RFM.
on the ct_containers table i'm passing a line, and its getting updated after the call.
on the ct_errors table i just want to receive the errors and i only receive the line, we add manually there ('Serious error with validation code').
kr, achim
FUNCTION zbapi_ra_validations .
*"*"Local Interface:
*" IMPORTING
*"     VALUE(IS_RA_SCREEN) TYPE ZBAPI_S_RA_SCREEN
*" CHANGING
*"     VALUE(CT_ERRORS) TYPE ZRA_T_ERRORS
*"     VALUE(CT_CONTAINERS) TYPE ZRA_T_CONT_IP
DATA:
    lo_badi_handle TYPE REF TO zra_validation_rule,
    ls_error       TYPE zra_s_error.
GET BADI lo_badi_handle.
TRY.
      CALL BADI lo_badi_handle->validate_rules
        EXPORTING
          is_screen_flds = is_ra_screen
        CHANGING
          ct_containers = ct_containers
          ct_errors      = ct_errors.
    CATCH zcx_ra.
      ls_error-message = 'Serious error with validation code'.
      APPEND ls_error TO ct_errors.
ENDTRY.
ENDFUNCTION.
if i call this rfm in SE37 the ct_errors table is populated with all errors and the manually created line.
Message was edited by: Achim Hauck

BPC 7.5 : Is it possible to load data from ECC to BPC

Hi,
Is it possible to load data from ECC to BPC in BPC 7.5 Netweaver version.
Thanks
Prasad Bobburu

Option 1 -
ECC -> BW -> BPC NW (Standard, or recommended for NW)
Option 2
ECC -> BW -> Openhub / Flat file -> BPC MS
This is more common for SAP customers, who are using BW, but running MS version
Option 3
ECC -> ABAP Extractor Program (generated flat file) -> BPC
Again a more common for SAP customers using BPC MS
-Kiran Malineni

Is it possible to load data from attribute of I.O. to text of the same I.O.

Hi guys,
is it possible to load data from attribute of InfoObject to text of the same InfoObject.
I have this requierement: the text (description long) of InfoObject should be filled defends on the content of one attribute of this InfoObject.
Is it possible via Update Rule? (we are using BW3.5)
And how?
Thanks in adance!
Regards

HI,
1st) activate your object as data target and do the assignment in the transfer or update rules.
--- How can I active my InfoObject (Text if the InofoObject)as data target?
Right Click your info area and choose " Insert characteristics as a Datatarget" and give your info object Id.
2) create a generic datasource on the p-table of your object and assign that datasource as text datasource to your object.
--- How can I create a generic datasource on the p-table of your object ?
For Eg: your info object name is like this
ZIO_CID
For this P table will be like this
/BIC/PZIO_CID
In RSO2 tcode Generic datasources create datasource based on this table .
Hope it helps
Regards,
Arun.M.D

Is it possible to show data from two different sql tables?

Is it possible to show data from two different sql tables? Either to show combined data by using a join on a foreign key or showing a typical master detail view?
I have one table With data about a house, and another table With URL's to images in the blob. Could these two be combined in the same Gallery?
Best regards Terje F - Norway

Hi Terje,
If you have a unique key, you could use one of the following functions for your scenarios:
If you only have one image per house, you can use LookUp:
http://siena.blob.core.windows.net/beta/ProjectSienaBetaFunctionReference.html#_Toc373745501
If you have multiple images per house, you can use Filter:
http://siena.blob.core.windows.net/beta/ProjectSienaBetaFunctionReference.html#_Toc373745487
Thanks
Robin

Unable to load data from FDMEE staging table to HFM tables

Hi,
We have installed EPM 11.1.2.3 with all latest related products (ODI/FDMEE) in our development environment
We are inprocess of loading data from EBS R12 to HFM using ERPI (Data Managemwnt in EPM 11.1.2.3). We could Import and validate the data but when we try to Export the data to HFM, the process continuously running hours (neither it gives any error nor it completes).
When we check the process details in ODI work repository, following processes are completed successfully
COMM_LOAD_BALANCES - Running .........(From past 1 day, still running)
EBS_GL_LOAD_BALANCES_DATA - Successful
COMM_LOAD_BALANCES - Successful
Whereas we could load data in staging table of FDMEE database schema and moreover we are even able to drill through to source system (EBS R12) from Data load workbench but not able to load the data into HFM application.
Log details from the process are below.
2013-11-05 17:04:59,747 INFO [AIF]: FDMEE Process Start, Process ID: 31
2013-11-05 17:04:59,747 INFO [AIF]: FDMEE Logging Level: 4
2013-11-05 17:04:59,748 INFO [AIF]: FDMEE Log File: C:\FDMEE\outbox\logs\OASIS_31.log
2013-11-05 17:04:59,748 INFO [AIF]: User:admin
2013-11-05 17:04:59,748 INFO [AIF]: Location:VisionLoc (Partitionkey:1)
2013-11-05 17:04:59,749 INFO [AIF]: Period Name:JAN (Period Key:1/1/12 12:00 AM)
2013-11-05 17:04:59,749 INFO [AIF]: Category Name:VisionCat (Category key:3)
2013-11-05 17:04:59,749 INFO [AIF]: Rule Name:VisionRule (Rule ID:2)
2013-11-05 17:05:00,844 INFO [AIF]: Jython Version: 2.5.1 (Release_2_5_1:6813, Sep 26 2009, 13:47:54)
[Oracle JRockit(R) (Oracle Corporation)]
2013-11-05 17:05:00,844 INFO [AIF]: Java Platform: java1.6.0_37
2013-11-05 17:05:02,910 INFO [AIF]: -------START IMPORT STEP-------
2013-11-05 17:05:02,953 INFO [AIF]: -------END IMPORT STEP-------
2013-11-05 17:05:03,030 INFO [AIF]: -------START EXPORT STEP-------
2013-11-05 17:05:03,108 INFO [AIF]:
Move Data for Period 'JAN'
Any help on above is much appreciated.
Thank you
Regards
Praneeth

Hi,
I have followed the steps 1 & 2 above. Noe the log shows something like below
2013-11-05 09:47:31,179 INFO [AIF]: FDMEE Process Start, Process ID: 22
2013-11-05 09:47:31,179 INFO [AIF]: FDMEE Logging Level: 4
2013-11-05 09:47:31,179 INFO [AIF]: FDMEE Log File: C:\FDMEE\outbox\logs\OASIS_22.log
2013-11-05 09:47:31,180 INFO [AIF]: User:admin
2013-11-05 09:47:31,180 INFO [AIF]: Location:VisionLoc (Partitionkey:1)
2013-11-05 09:47:31,180 INFO [AIF]: Period Name:JAN (Period Key:1/1/12 12:00 AM)
2013-11-05 09:47:31,180 INFO [AIF]: Category Name:VisionCat (Category key:3)
2013-11-05 09:47:31,181 INFO [AIF]: Rule Name:VisionRule (Rule ID:2)
2013-11-05 09:47:32,378 INFO [AIF]: Jython Version: 2.5.1 (Release_2_5_1:6813, Sep 26 2009, 13:47:54)
[Oracle JRockit(R) (Oracle Corporation)]
2013-11-05 09:47:32,378 INFO [AIF]: Java Platform: java1.6.0_37
2013-11-05 09:47:34,652 INFO [AIF]: -------START IMPORT STEP-------
2013-11-05 09:47:34,698 INFO [AIF]: -------END IMPORT STEP-------
2013-11-05 09:47:34,744 INFO [AIF]: -------START EXPORT STEP-------
2013-11-05 09:47:34,828 INFO [AIF]:
Move Data for Period 'JAN'
2013-11-08 11:49:10,478 INFO [AIF]: FDMEE Process Start, Process ID: 22
2013-11-08 11:49:10,493 INFO [AIF]: FDMEE Logging Level: 5
2013-11-08 11:49:10,493 INFO [AIF]: FDMEE Log File: C:\FDMEE\outbox\logs\OASIS_22.log
2013-11-08 11:49:10,494 INFO [AIF]: User:admin
2013-11-08 11:49:10,494 INFO [AIF]: Location:VISIONLOC (Partitionkey:1)
2013-11-08 11:49:10,494 INFO [AIF]: Period Name:JAN (Period Key:1/1/12 12:00 AM)
2013-11-08 11:49:10,495 INFO [AIF]: Category Name:VISIONCAT (Category key:1)
2013-11-08 11:49:10,495 INFO [AIF]: Rule Name:VISIONRULE (Rule ID:1)
2013-11-08 11:49:11,903 INFO [AIF]: Jython Version: 2.5.1 (Release_2_5_1:6813, Sep 26 2009, 13:47:54)
[Oracle JRockit(R) (Oracle Corporation)]
2013-11-08 11:49:11,909 INFO [AIF]: Java Platform: java1.6.0_37
2013-11-08 11:49:14,037 INFO [AIF]: -------START IMPORT STEP-------
2013-11-08 11:49:14,105 INFO [AIF]: -------END IMPORT STEP-------
2013-11-08 11:49:14,152 INFO [AIF]: -------START EXPORT STEP-------
2013-11-08 11:49:14,178 DEBUG [AIF]: CommData.exportData - START
2013-11-08 11:49:14,183 DEBUG [AIF]: CommData.getRuleInfo - START
2013-11-08 11:49:14,188 DEBUG [AIF]:
        SELECT brl.RULE_ID
        ,br.RULE_NAME
        ,brl.PARTITIONKEY
        ,brl.CATKEY
        ,part.PARTVALGROUP
        ,br.SOURCE_SYSTEM_ID
        ,ss.SOURCE_SYSTEM_TYPE
        ,CASE
          WHEN ss.SOURCE_SYSTEM_TYPE LIKE 'EBS%' THEN 'N'
          WHEN ss.SOURCE_SYSTEM_TYPE LIKE 'PS%' THEN 'N'
          WHEN ss.SOURCE_SYSTEM_TYPE LIKE 'FUSION%' THEN 'N'
          WHEN ss.SOURCE_SYSTEM_TYPE LIKE 'FILE%' THEN 'N'
          ELSE 'Y'
        END SOURCE_ADAPTER_FLAG
        ,app.APPLICATION_ID
        ,app.TARGET_APPLICATION_NAME
        ,app.TARGET_APPLICATION_TYPE
        ,app.DATA_LOAD_METHOD
        ,brl.PLAN_TYPE
        ,CASE brl.PLAN_TYPE
          WHEN 'PLAN1' THEN 1
          WHEN 'PLAN2' THEN 2
          WHEN 'PLAN3' THEN 3
          WHEN 'PLAN4' THEN 4
          WHEN 'PLAN5' THEN 5
          ELSE 0
        END PLAN_NUMBER
        ,br.INCL_ZERO_BALANCE_FLAG
        ,br.PERIOD_MAPPING_TYPE
        ,br.INCLUDE_ADJ_PERIODS_FLAG
        ,br.BALANCE_TYPE ACTUAL_FLAG
        ,br.AMOUNT_TYPE
        ,br.BALANCE_SELECTION
        ,br.BALANCE_METHOD_CODE
        ,COALESCE(br.SIGNAGE_METHOD, 'ABSOLUTE') SIGNAGE_METHOD
        ,br.CURRENCY_CODE
        ,br.BAL_SEG_VALUE_OPTION_CODE
        ,brl.EXECUTION_MODE
        ,COALESCE(brl.IMPORT_FROM_SOURCE_FLAG, 'Y') IMPORT_FROM_SOURCE_FLAG
        ,COALESCE(brl.RECALCULATE_FLAG, 'N') RECALCULATE_FLAG
        ,COALESCE(brl.EXPORT_TO_TARGET_FLAG, 'N') EXPORT_TO_TARGET_FLAG
        ,CASE
          WHEN (br.LEDGER_GROUP_ID IS NOT NULL) THEN 'MULTI'
          WHEN (br.SOURCE_LEDGER_ID IS NOT NULL) THEN 'SINGLE'
          ELSE 'NONE'
        END LEDGER_GROUP_CODE
        ,COALESCE(br.BALANCE_AMOUNT_BS, 'YTD') BALANCE_AMOUNT_BS
        ,COALESCE(br.BALANCE_AMOUNT_IS, 'PERIODIC') BALANCE_AMOUNT_IS
        ,br.LEDGER_GROUP
        ,(SELECT brd.DETAIL_CODE
          FROM AIF_BAL_RULE_DETAILS brd
          WHERE brd.RULE_ID = br.RULE_ID
          AND brd.DETAIL_TYPE = 'LEDGER'
        ) PS_LEDGER
        ,CASE lg.LEDGER_TEMPLATE
          WHEN 'COMMITMENT' THEN 'Y'
          ELSE 'N'
        END KK_FLAG
        ,p.LAST_UPDATED_BY
        ,p.AIF_WEB_SERVICE_URL WEB_SERVICE_URL
        ,p.EPM_ORACLE_INSTANCE
        FROM AIF_PROCESSES p
        INNER JOIN AIF_BAL_RULE_LOADS brl
          ON brl.LOADID = p.PROCESS_ID
        INNER JOIN AIF_BALANCE_RULES br
          ON br.RULE_ID = brl.RULE_ID
        INNER JOIN AIF_SOURCE_SYSTEMS ss
          ON ss.SOURCE_SYSTEM_ID = br.SOURCE_SYSTEM_ID
        INNER JOIN AIF_TARGET_APPLICATIONS app
          ON app.APPLICATION_ID = brl.APPLICATION_ID
        INNER JOIN TPOVPARTITION part
          ON part.PARTITIONKEY = br.PARTITIONKEY
        INNER JOIN TBHVIMPGROUP imp
          ON imp.IMPGROUPKEY = part.PARTIMPGROUP
        LEFT OUTER JOIN AIF_COA_LEDGERS l
          ON l.SOURCE_SYSTEM_ID = p.SOURCE_SYSTEM_ID
          AND l.SOURCE_LEDGER_ID = COALESCE(br.SOURCE_LEDGER_ID,imp.IMPSOURCELEDGERID)
        LEFT OUTER JOIN AIF_PS_SET_CNTRL_REC_STG scr
          ON scr.SOURCE_SYSTEM_ID = l.SOURCE_SYSTEM_ID
          AND scr.SETCNTRLVALUE = l.SOURCE_LEDGER_NAME
          AND scr.RECNAME = 'LED_GRP_TBL'
        LEFT OUTER JOIN AIF_PS_LED_GRP_TBL_STG lg
          ON lg.SOURCE_SYSTEM_ID = scr.SOURCE_SYSTEM_ID
          AND lg.SETID = scr.SETID
          AND lg.LEDGER_GROUP = br.LEDGER_GROUP
        WHERE p.PROCESS_ID = 22
2013-11-08 11:49:14,195 DEBUG [AIF]:
      SELECT adim.BALANCE_COLUMN_NAME DIMNAME
      ,adim.DIMENSION_ID
      ,dim.TARGET_DIMENSION_CLASS_NAME
      ,(SELECT COA_SEGMENT_NAME
        FROM AIF_COA_SEGMENTS cs
        WHERE cs.COA_LINE_ID = tiie.IMPSOURCECOALINEID1
      ) COA_SEGMENT_NAME1
      ,(SELECT COA_SEGMENT_NAME
        FROM AIF_COA_SEGMENTS cs
        WHERE cs.COA_LINE_ID = tiie.IMPSOURCECOALINEID2
      ) COA_SEGMENT_NAME2
      ,(SELECT COA_SEGMENT_NAME
        FROM AIF_COA_SEGMENTS cs
        WHERE cs.COA_LINE_ID = tiie.IMPSOURCECOALINEID3
      ) COA_SEGMENT_NAME3
      ,(SELECT COA_SEGMENT_NAME
        FROM AIF_COA_SEGMENTS cs
        WHERE cs.COA_LINE_ID = tiie.IMPSOURCECOALINEID4
      ) COA_SEGMENT_NAME4
      ,(SELECT COA_SEGMENT_NAME
        FROM AIF_COA_SEGMENTS cs
        WHERE cs.COA_LINE_ID = tiie.IMPSOURCECOALINEID5
      ) COA_SEGMENT_NAME5
      ,(SELECT CASE mdd.ORPHAN_OPTION_CODE
          WHEN 'CHILD' THEN 'N'
          WHEN 'ROOT' THEN 'N'
          ELSE 'Y'
        END DIMENSION_FILTER_FLAG
        FROM AIF_MAP_DIM_DETAILS_V mdd
        ,AIF_MAPPING_RULES mr
        WHERE mr.PARTITIONKEY = tpp.PARTITIONKEY
        AND mdd.RULE_ID = mr.RULE_ID
        AND mdd.DIMENSION_ID = adim.DIMENSION_ID
      ) DIMENSION_FILTER_FLAG
      ,tiie.IMPCONCATCHAR
      FROM TPOVPARTITION tpp
      INNER JOIN AIF_TARGET_APPL_DIMENSIONS adim
        ON adim.APPLICATION_ID = 2
      INNER JOIN AIF_DIMENSIONS dim
        ON dim.DIMENSION_ID = adim.DIMENSION_ID
      LEFT OUTER JOIN TBHVIMPITEMERPI tiie
        ON tiie.IMPGROUPKEY = tpp.PARTIMPGROUP
        AND tiie.IMPFLDFIELDNAME = adim.BALANCE_COLUMN_NAME
        AND tiie.IMPMAPTYPE = 'ERP'
      WHERE tpp.PARTITIONKEY = 1
      AND adim.BALANCE_COLUMN_NAME IS NOT NULL
      ORDER BY adim.BALANCE_COLUMN_NAME
2013-11-08 11:49:14,197 DEBUG [AIF]: {'APPLICATION_ID': 2L, 'IMPORT_FROM_SOURCE_FLAG': u'N', 'PLAN_TYPE': None, 'RULE_NAME': u'VISIONRULE', 'ACTUAL_FLAG': u'A', 'IS_INCREMENTAL_LOAD': False, 'EPM_ORACLE_INSTANCE': u'C:\\Oracle\\Middleware\\user_projects\\epmsystem1', 'CATKEY': 1L, 'BAL_SEG_VALUE_OPTION_CODE': u'ALL', 'INCLUDE_ADJ_PERIODS_FLAG': u'N', 'PERIOD_MAPPING_TYPE': u'EXPLICIT', 'SOURCE_SYSTEM_TYPE': u'EBS_R12', 'LEDGER_GROUP': None, 'TARGET_APPLICATION_NAME': u'OASIS', 'RECALCULATE_FLAG': u'N', 'SOURCE_SYSTEM_ID': 2L, 'TEMP_DATA_TABLE_NAME': 'TDATASEG_T', 'KK_FLAG': u'N', 'AMOUNT_TYPE': u'MONETARY', 'EXPORT_TO_TARGET_FLAG': u'Y', 'DATA_TABLE_NAME': 'TDATASEG', 'DIMNAME_LIST': [u'ACCOUNT', u'ENTITY', u'ICP', u'UD1', u'UD2', u'UD3', u'UD4'], 'TDATAMAPTYPE': 'ERP', 'LAST_UPDATED_BY': u'admin', 'DIMNAME_MAP': {u'UD3': {'IMPCONCATCHAR': None, 'TARGET_DIMENSION_CLASS_NAME': u'Generic', 'COA_SEGMENT_NAME5': None, 'COA_SEGMENT_NAME1': u'SEGMENT5', 'COA_SEGMENT_NAME2': None, 'COA_SEGMENT_NAME3': None, 'DIMENSION_FILTER_FLAG': None, 'COA_SEGMENT_NAME4': None, 'DIMNAME': u'UD3', 'DIMENSION_ID': 9L}, u'ICP': {'IMPCONCATCHAR': None, 'TARGET_DIMENSION_CLASS_NAME': u'ICP', 'COA_SEGMENT_NAME5': None, 'COA_SEGMENT_NAME1': u'SEGMENT7', 'COA_SEGMENT_NAME2': None, 'COA_SEGMENT_NAME3': None, 'DIMENSION_FILTER_FLAG': None, 'COA_SEGMENT_NAME4': None, 'DIMNAME': u'ICP', 'DIMENSION_ID': 8L}, u'ENTITY': {'IMPCONCATCHAR': None, 'TARGET_DIMENSION_CLASS_NAME': u'Entity', 'COA_SEGMENT_NAME5': None, 'COA_SEGMENT_NAME1': u'SEGMENT1', 'COA_SEGMENT_NAME2': None, 'COA_SEGMENT_NAME3': None, 'DIMENSION_FILTER_FLAG': None, 'COA_SEGMENT_NAME4': None, 'DIMNAME': u'ENTITY', 'DIMENSION_ID': 12L}, u'UD2': {'IMPCONCATCHAR': None, 'TARGET_DIMENSION_CLASS_NAME': u'Generic', 'COA_SEGMENT_NAME5': None, 'COA_SEGMENT_NAME1': u'SEGMENT4', 'COA_SEGMENT_NAME2': None, 'COA_SEGMENT_NAME3': None, 'DIMENSION_FILTER_FLAG': None, 'COA_SEGMENT_NAME4': None, 'DIMNAME': u'UD2', 'DIMENSION_ID': 11L}, u'UD4': {'IMPCONCATCHAR': None, 'TARGET_DIMENSION_CLASS_NAME': u'Generic', 'COA_SEGMENT_NAME5': None, 'COA_SEGMENT_NAME1': u'SEGMENT6', 'COA_SEGMENT_NAME2': None, 'COA_SEGMENT_NAME3': None, 'DIMENSION_FILTER_FLAG': None, 'COA_SEGMENT_NAME4': None, 'DIMNAME': u'UD4', 'DIMENSION_ID': 1L}, u'ACCOUNT': {'IMPCONCATCHAR': None, 'TARGET_DIMENSION_CLASS_NAME': u'Account', 'COA_SEGMENT_NAME5': None, 'COA_SEGMENT_NAME1': u'SEGMENT3', 'COA_SEGMENT_NAME2': None, 'COA_SEGMENT_NAME3': None, 'DIMENSION_FILTER_FLAG': None, 'COA_SEGMENT_NAME4': None, 'DIMNAME': u'ACCOUNT', 'DIMENSION_ID': 10L}, u'UD1': {'IMPCONCATCHAR': None, 'TARGET_DIMENSION_CLASS_NAME': u'Generic', 'COA_SEGMENT_NAME5': None, 'COA_SEGMENT_NAME1': u'SEGMENT2', 'COA_SEGMENT_NAME2': None, 'COA_SEGMENT_NAME3': None, 'DIMENSION_FILTER_FLAG': None, 'COA_SEGMENT_NAME4': None, 'DIMNAME': u'UD1', 'DIMENSION_ID': 7L}}, 'TARGET_APPLICATION_TYPE': u'HFM', 'PARTITIONKEY': 1L, 'PARTVALGROUP': u'[NONE]', 'LEDGER_GROUP_CODE': u'SINGLE', 'INCLUDE_ZERO_BALANCE_FLAG': u'N', 'EXECUTION_MODE': u'SNAPSHOT', 'PLAN_NUMBER': 0L, 'PS_LEDGER': None, 'BALANCE_SELECTION': u'FUNCTIONAL', 'BALANCE_AMOUNT_IS': u'PERIODIC', 'RULE_ID': 1L, 'BALANCE_AMOUNT_BS': u'YTD', 'CURRENCY_CODE': None, 'SOURCE_ADAPTER_FLAG': u'N', 'BALANCE_METHOD_CODE': u'STANDARD', 'SIGNAGE_METHOD': u'SAME', 'WEB_SERVICE_URL': u'http://localhost:9000/aif', 'DATA_LOAD_METHOD': u'CLASSIC_VIA_EPMI'}
2013-11-08 11:49:14,197 DEBUG [AIF]: CommData.getRuleInfo - END
2013-11-08 11:49:14,224 DEBUG [AIF]: CommData.insertPeriods - START
2013-11-08 11:49:14,228 DEBUG [AIF]: CommData.getLedgerListAndMap - START
2013-11-08 11:49:14,229 DEBUG [AIF]: CommData.getLedgerSQL - START
2013-11-08 11:49:14,229 DEBUG [AIF]: CommData.getLedgerSQL - END
2013-11-08 11:49:14,229 DEBUG [AIF]:
          SELECT l.SOURCE_LEDGER_ID
          ,l.SOURCE_LEDGER_NAME
          ,l.SOURCE_COA_ID
          ,l.CALENDAR_ID
          ,'0' SETID
          ,l.PERIOD_TYPE
          ,NULL LEDGER_TABLE_NAME
          FROM AIF_BALANCE_RULES br
          ,AIF_COA_LEDGERS l
          WHERE br.RULE_ID = 1
          AND l.SOURCE_SYSTEM_ID = br.SOURCE_SYSTEM_ID
          AND l.SOURCE_LEDGER_ID = br.SOURCE_LEDGER_ID
2013-11-08 11:49:14,230 DEBUG [AIF]: CommData.getLedgerListAndMap - END
2013-11-08 11:49:14,232 DEBUG [AIF]:
        INSERT INTO AIF_PROCESS_PERIODS (
          PROCESS_ID
          ,PERIODKEY
          ,PERIOD_ID
          ,ADJUSTMENT_PERIOD_FLAG
          ,GL_PERIOD_YEAR
          ,GL_PERIOD_NUM
          ,GL_PERIOD_NAME
          ,GL_PERIOD_CODE
          ,GL_EFFECTIVE_PERIOD_NUM
          ,YEARTARGET
          ,PERIODTARGET
          ,IMP_ENTITY_TYPE
          ,IMP_ENTITY_ID
          ,IMP_ENTITY_NAME
          ,TRANS_ENTITY_TYPE
          ,TRANS_ENTITY_ID
          ,TRANS_ENTITY_NAME
          ,PRIOR_PERIOD_FLAG
          ,SOURCE_LEDGER_ID
                SELECT DISTINCT brl.LOADID PROCESS_ID
                ,pp.PERIODKEY PERIODKEY
                ,prd.PERIOD_ID
                ,COALESCE(prd.ADJUSTMENT_PERIOD_FLAG, 'N') ADJUSTMENT_PERIOD_FLAG
                ,COALESCE(prd.YEAR, ppsrc.GL_PERIOD_YEAR,0) GL_PERIOD_YEAR
                ,COALESCE(prd.PERIOD_NUM, ppsrc.GL_PERIOD_NUM,0) GL_PERIOD_NUM
                ,COALESCE(prd.PERIOD_NAME, ppsrc.GL_PERIOD_NAME,'0') GL_PERIOD_NAME
                ,COALESCE(prd.PERIOD_CODE, CAST(COALESCE(prd.PERIOD_NUM, ppsrc.GL_PERIOD_NUM,0) AS VARCHAR(38)),'0') GL_PERIOD_CODE
                ,(COALESCE(prd.YEAR, ppsrc.GL_PERIOD_YEAR,0) * 10000 + COALESCE(prd.PERIOD_NUM, ppsrc.GL_PERIOD_NUM,0)) GL_EFFECTIVE_PERIOD_NUM
                ,COALESCE(ppa.YEARTARGET, pp.YEARTARGET) YEARTARGET
                ,COALESCE(ppa.PERIODTARGET, pp.PERIODTARGET) PERIODTARGET
                ,'PROCESS_BAL_IMP' IMP_ENTITY_TYPE
                ,(COALESCE(prd.YEAR, ppsrc.GL_PERIOD_YEAR,0) * 10000 + COALESCE(prd.PERIOD_NUM, ppsrc.GL_PERIOD_NUM,0)) IMP_ENTITY_ID
                ,COALESCE(prd.PERIOD_NAME, ppsrc.GL_PERIOD_NAME,'0') IMP_ENTITY_NAME
                ,'PROCESS_BAL_TRANS' TRANS_ENTITY_TYPE
                ,(COALESCE(prd.YEAR, ppsrc.GL_PERIOD_YEAR,0) * 10000 + COALESCE(prd.PERIOD_NUM, ppsrc.GL_PERIOD_NUM,0)) TRANS_ENTITY_ID
                ,pp.PERIODDESC TRANS_ENTITY_NAME
                ,'N' PRIOR_PERIOD_FLAG
                ,2202 SOURCE_LEDGER_ID
                FROM (
                  AIF_BAL_RULE_LOADS brl
                  INNER JOIN TPOVCATEGORY pc
                    ON pc.CATKEY = brl.CATKEY
                  INNER JOIN TPOVPERIOD_FLAT_V pp
                    ON pp.PERIODFREQ = pc.CATFREQ
                    AND pp.PERIODKEY >= brl.START_PERIODKEY
                    AND pp.PERIODKEY <= brl.END_PERIODKEY
                  LEFT OUTER JOIN TPOVPERIODADAPTOR_FLAT_V ppa
                    ON ppa.PERIODKEY = pp.PERIODKEY
                    AND ppa.PERIODFREQ = pp.PERIODFREQ
                    AND ppa.INTSYSTEMKEY = 'OASIS'
                INNER JOIN TPOVPERIODSOURCE ppsrc
                  ON ppsrc.PERIODKEY = pp.PERIODKEY
                  AND ppsrc.MAPPING_TYPE = 'EXPLICIT'
                  AND ppsrc.SOURCE_SYSTEM_ID = 2
                  AND ppsrc.CALENDAR_ID IN ('29067')
                LEFT OUTER JOIN AIF_GL_PERIODS_STG prd
                  ON prd.PERIOD_ID = ppsrc.PERIOD_ID
                  AND prd.SOURCE_SYSTEM_ID = ppsrc.SOURCE_SYSTEM_ID
                  AND prd.CALENDAR_ID = ppsrc.CALENDAR_ID
          AND prd.SETID = '0'
          AND prd.PERIOD_TYPE = '507'
                  AND prd.ADJUSTMENT_PERIOD_FLAG = 'N'
                WHERE brl.LOADID = 22
                ORDER BY pp.PERIODKEY
                ,GL_EFFECTIVE_PERIOD_NUM
2013-11-08 11:49:14,235 DEBUG [AIF]: CommData.insertPeriods - END
2013-11-08 11:49:14,240 DEBUG [AIF]: CommData.moveData - START
2013-11-08 11:49:14,242 DEBUG [AIF]: CommData.getPovList - START
2013-11-08 11:49:14,242 DEBUG [AIF]:
        SELECT PARTITIONKEY
        ,PARTNAME
        ,CATKEY
        ,CATNAME
        ,PERIODKEY
        ,COALESCE(PERIODDESC, TO_CHAR(PERIODKEY,'YYYY-MM-DD HH24:MI:SS')) PERIODDESC
        ,RULE_ID
        ,RULE_NAME
        FROM (
          SELECT DISTINCT brl.PARTITIONKEY
          ,part.PARTNAME
          ,brl.CATKEY
          ,cat.CATNAME
          ,pprd.PERIODKEY
          ,pp.PERIODDESC
          ,brl.RULE_ID
          ,br.RULE_NAME
          FROM AIF_BAL_RULE_LOADS brl
          INNER JOIN AIF_BALANCE_RULES br
            ON br.RULE_ID = brl.RULE_ID
          INNER JOIN TPOVPARTITION part
            ON part.PARTITIONKEY = brl.PARTITIONKEY
          INNER JOIN TPOVCATEGORY cat
            ON cat.CATKEY = brl.CATKEY
          INNER JOIN AIF_PROCESS_PERIODS pprd
            ON pprd.PROCESS_ID = brl.LOADID
          LEFT OUTER JOIN TPOVPERIOD pp
            ON pp.PERIODKEY = pprd.PERIODKEY
          WHERE brl.LOADID = 22
        ) q
        ORDER BY PARTITIONKEY
        ,CATKEY
        ,PERIODKEY
        ,RULE_ID
2013-11-08 11:49:14,244 DEBUG [AIF]: CommData.getPovList - END
2013-11-08 11:49:14,245 INFO [AIF]:
Move Data for Period 'JAN'
2013-11-08 11:49:14,246 DEBUG [AIF]:
          UPDATE TDATASEG
          SET LOADID = 22
          WHERE PARTITIONKEY = 1
          AND CATKEY = 1
          AND RULE_ID = 1
          AND LOADID < 22
            AND PERIODKEY = '2012-01-01'
2013-11-08 11:49:14,320 DEBUG [AIF]: Number of Rows updated on TDATASEG: 1842
2013-11-08 11:49:14,320 DEBUG [AIF]:
        INSERT INTO AIF_APPL_LOAD_AUDIT (
          LOADID
          ,TARGET_APPLICATION_TYPE
          ,TARGET_APPLICATION_NAME
          ,PLAN_TYPE
          ,SOURCE_LEDGER_ID
          ,EPM_YEAR
          ,EPM_PERIOD
          ,SNAPSHOT_FLAG
          ,SEGMENT_FILTER_FLAG
          ,PARTITIONKEY
          ,CATKEY
          ,RULE_ID
          ,PERIODKEY
          ,EXPORT_TO_TARGET_FLAG
        SELECT DISTINCT 22
        ,TARGET_APPLICATION_TYPE
        ,TARGET_APPLICATION_NAME
        ,PLAN_TYPE
        ,SOURCE_LEDGER_ID
        ,EPM_YEAR
        ,EPM_PERIOD
        ,SNAPSHOT_FLAG
        ,SEGMENT_FILTER_FLAG
        ,PARTITIONKEY
        ,CATKEY
        ,RULE_ID
        ,PERIODKEY
        ,'N'
        FROM AIF_APPL_LOAD_AUDIT
        WHERE PARTITIONKEY = 1
        AND CATKEY = 1
        AND RULE_ID = 1
        AND LOADID < 22
            AND PERIODKEY = '2012-01-01'
2013-11-08 11:49:14,321 DEBUG [AIF]: Number of Rows inserted into AIF_APPL_LOAD_AUDIT: 1
2013-11-08 11:49:14,322 DEBUG [AIF]:
        INSERT INTO AIF_APPL_LOAD_PRD_AUDIT (
          LOADID
          ,GL_PERIOD_ID
          ,GL_PERIOD_YEAR
          ,DELTA_RUN_ID
          ,PARTITIONKEY
          ,CATKEY
          ,RULE_ID
          ,PERIODKEY
        SELECT DISTINCT 22
        ,GL_PERIOD_ID
        ,GL_PERIOD_YEAR
        ,DELTA_RUN_ID
        ,PARTITIONKEY
        ,CATKEY
        ,RULE_ID
        ,PERIODKEY
        FROM AIF_APPL_LOAD_PRD_AUDIT
        WHERE PARTITIONKEY = 1
        AND CATKEY = 1
        AND RULE_ID = 1
        AND LOADID < 22
            AND PERIODKEY = '2012-01-01'
2013-11-08 11:49:14,323 DEBUG [AIF]: Number of Rows inserted into AIF_APPL_LOAD_PRD_AUDIT: 1
2013-11-08 11:49:14,325 DEBUG [AIF]: CommData.moveData - END
2013-11-08 11:49:14,332 DEBUG [AIF]: CommData.updateWorkflow - START
2013-11-08 11:49:14,332 DEBUG [AIF]:
    SELECT tlp.PROCESSSTATUS
    ,tlps.PROCESSSTATUSDESC
    ,CASE WHEN (tlp.INTLOCKSTATE = 60) THEN 'Y' ELSE 'N' END LOCK_FLAG
    FROM TLOGPROCESS tlp
    ,TLOGPROCESSSTATES tlps
    WHERE tlp.PARTITIONKEY = 1
    AND tlp.CATKEY = 1
    AND tlp.PERIODKEY = '2012-01-01'
    AND tlp.RULE_ID = 1
    AND tlps.PROCESSSTATUSKEY = tlp.PROCESSSTATUS
2013-11-08 11:49:14,336 DEBUG [AIF]:
        UPDATE TLOGPROCESS
        SET PROCESSENDTIME = CURRENT_TIMESTAMP
        ,PROCESSSTATUS = 20
          ,PROCESSEXP = 0
          ,PROCESSENTLOAD = 0
          ,PROCESSENTVAL = 0
          ,PROCESSEXPNOTE = NULL
          ,PROCESSENTLOADNOTE = NULL
          ,PROCESSENTVALNOTE = NULL
        WHERE PARTITIONKEY = 1
        AND CATKEY = 1
        AND PERIODKEY = '2012-01-01'
        AND RULE_ID = 1
2013-11-08 11:49:14,338 DEBUG [AIF]: CommData.updateWorkflow - END
2013-11-08 11:49:14,339 DEBUG [AIF]: CommData.purgeInvalidRecordsTDATASEG - START
2013-11-08 11:49:14,341 DEBUG [AIF]:
        DELETE FROM TDATASEG
        WHERE LOADID = 22
          AND (
        PARTITIONKEY = 1
        AND CATKEY = 1
        AND PERIODKEY = '2012-01-01'
        AND RULE_ID = 1
        AND VALID_FLAG = 'N'
2013-11-08 11:49:14,342 DEBUG [AIF]: Number of Rows deleted from TDATASEG: 0
2013-11-08 11:49:14,342 DEBUG [AIF]: CommData.purgeInvalidRecordsTDATASEG - END
2013-11-08 11:49:14,344 DEBUG [AIF]: CommData.updateAppLoadAudit - START
2013-11-08 11:49:14,344 DEBUG [AIF]:
        UPDATE AIF_APPL_LOAD_AUDIT
        SET EXPORT_TO_TARGET_FLAG = 'Y'
        WHERE LOADID = 22
        AND PARTITIONKEY = 1
        AND CATKEY = 1
        AND PERIODKEY= '2012-01-01'
        AND RULE_ID = 1
2013-11-08 11:49:14,345 DEBUG [AIF]: Number of Rows updated on AIF_APPL_LOAD_AUDIT: 1
2013-11-08 11:49:14,345 DEBUG [AIF]: CommData.updateAppLoadAudit - END
2013-11-08 11:49:14,345 DEBUG [AIF]: CommData.updateWorkflow - START
2013-11-08 11:49:14,346 DEBUG [AIF]:
        UPDATE TLOGPROCESS
        SET PROCESSENDTIME = CURRENT_TIMESTAMP
        ,PROCESSSTATUS = 21
          ,PROCESSEXP = 1
          ,PROCESSEXPNOTE = 'Export Successful'
        WHERE PARTITIONKEY = 1
        AND CATKEY = 1
        AND PERIODKEY = '2012-01-01'
        AND RULE_ID = 1
2013-11-08 11:49:14,347 DEBUG [AIF]: CommData.updateWorkflow - END
2013-11-08 11:49:14,347 DEBUG [AIF]: CommData.exportData - END
2013-11-08 11:49:14,404 DEBUG [AIF]: HfmData.loadData - START
2013-11-08 11:49:14,404 DEBUG [AIF]: CommData.getRuleInfo - START
2013-11-08 11:49:14,404 DEBUG [AIF]:
        SELECT brl.RULE_ID
        ,br.RULE_NAME
        ,brl.PARTITIONKEY
        ,brl.CATKEY
        ,part.PARTVALGROUP
        ,br.SOURCE_SYSTEM_ID
        ,ss.SOURCE_SYSTEM_TYPE
        ,CASE
          WHEN ss.SOURCE_SYSTEM_TYPE LIKE 'EBS%' THEN 'N'
          WHEN ss.SOURCE_SYSTEM_TYPE LIKE 'PS%' THEN 'N'
          WHEN ss.SOURCE_SYSTEM_TYPE LIKE 'FUSION%' THEN 'N'
          WHEN ss.SOURCE_SYSTEM_TYPE LIKE 'FILE%' THEN 'N'
          ELSE 'Y'
        END SOURCE_ADAPTER_FLAG
        ,app.APPLICATION_ID
        ,app.TARGET_APPLICATION_NAME
        ,app.TARGET_APPLICATION_TYPE
        ,app.DATA_LOAD_METHOD
        ,brl.PLAN_TYPE
        ,CASE brl.PLAN_TYPE
          WHEN 'PLAN1' THEN 1
          WHEN 'PLAN2' THEN 2
          WHEN 'PLAN3' THEN 3
          WHEN 'PLAN4' THEN 4
          WHEN 'PLAN5' THEN 5
          ELSE 0
        END PLAN_NUMBER
        ,br.INCL_ZERO_BALANCE_FLAG
        ,br.PERIOD_MAPPING_TYPE
        ,br.INCLUDE_ADJ_PERIODS_FLAG
        ,br.BALANCE_TYPE ACTUAL_FLAG
        ,br.AMOUNT_TYPE
        ,br.BALANCE_SELECTION
        ,br.BALANCE_METHOD_CODE
        ,COALESCE(br.SIGNAGE_METHOD, 'ABSOLUTE') SIGNAGE_METHOD
        ,br.CURRENCY_CODE
        ,br.BAL_SEG_VALUE_OPTION_CODE
        ,brl.EXECUTION_MODE
        ,COALESCE(brl.IMPORT_FROM_SOURCE_FLAG, 'Y') IMPORT_FROM_SOURCE_FLAG
        ,COALESCE(brl.RECALCULATE_FLAG, 'N') RECALCULATE_FLAG
        ,COALESCE(brl.EXPORT_TO_TARGET_FLAG, 'N') EXPORT_TO_TARGET_FLAG
        ,CASE
          WHEN (br.LEDGER_GROUP_ID IS NOT NULL) THEN 'MULTI'
          WHEN (br.SOURCE_LEDGER_ID IS NOT NULL) THEN 'SINGLE'
          ELSE 'NONE'
        END LEDGER_GROUP_CODE
        ,COALESCE(br.BALANCE_AMOUNT_BS, 'YTD') BALANCE_AMOUNT_BS
        ,COALESCE(br.BALANCE_AMOUNT_IS, 'PERIODIC') BALANCE_AMOUNT_IS
        ,br.LEDGER_GROUP
        ,(SELECT brd.DETAIL_CODE
          FROM AIF_BAL_RULE_DETAILS brd
          WHERE brd.RULE_ID = br.RULE_ID
          AND brd.DETAIL_TYPE = 'LEDGER'
        ) PS_LEDGER
        ,CASE lg.LEDGER_TEMPLATE
          WHEN 'COMMITMENT' THEN 'Y'
          ELSE 'N'
        END KK_FLAG
        ,p.LAST_UPDATED_BY
        ,p.AIF_WEB_SERVICE_URL WEB_SERVICE_URL
        ,p.EPM_ORACLE_INSTANCE
        FROM AIF_PROCESSES p
        INNER JOIN AIF_BAL_RULE_LOADS brl
          ON brl.LOADID = p.PROCESS_ID
        INNER JOIN AIF_BALANCE_RULES br
          ON br.RULE_ID = brl.RULE_ID
        INNER JOIN AIF_SOURCE_SYSTEMS ss
          ON ss.SOURCE_SYSTEM_ID = br.SOURCE_SYSTEM_ID
        INNER JOIN AIF_TARGET_APPLICATIONS app
          ON app.APPLICATION_ID = brl.APPLICATION_ID
        INNER JOIN TPOVPARTITION part
          ON part.PARTITIONKEY = br.PARTITIONKEY
        INNER JOIN TBHVIMPGROUP imp
          ON imp.IMPGROUPKEY = part.PARTIMPGROUP
        LEFT OUTER JOIN AIF_COA_LEDGERS l
          ON l.SOURCE_SYSTEM_ID = p.SOURCE_SYSTEM_ID
          AND l.SOURCE_LEDGER_ID = COALESCE(br.SOURCE_LEDGER_ID,imp.IMPSOURCELEDGERID)
        LEFT OUTER JOIN AIF_PS_SET_CNTRL_REC_STG scr
          ON scr.SOURCE_SYSTEM_ID = l.SOURCE_SYSTEM_ID
          AND scr.SETCNTRLVALUE = l.SOURCE_LEDGER_NAME
          AND scr.RECNAME = 'LED_GRP_TBL'
        LEFT OUTER JOIN AIF_PS_LED_GRP_TBL_STG lg
          ON lg.SOURCE_SYSTEM_ID = scr.SOURCE_SYSTEM_ID
          AND lg.SETID = scr.SETID
          AND lg.LEDGER_GROUP = br.LEDGER_GROUP
        WHERE p.PROCESS_ID = 22
2013-11-08 11:49:14,406 DEBUG [AIF]:
      SELECT adim.BALANCE_COLUMN_NAME DIMNAME
      ,adim.DIMENSION_ID
      ,dim.TARGET_DIMENSION_CLASS_NAME
      ,(SELECT COA_SEGMENT_NAME
        FROM AIF_COA_SEGMENTS cs
        WHERE cs.COA_LINE_ID = tiie.IMPSOURCECOALINEID1
      ) COA_SEGMENT_NAME1
      ,(SELECT COA_SEGMENT_NAME
        FROM AIF_COA_SEGMENTS cs
        WHERE cs.COA_LINE_ID = tiie.IMPSOURCECOALINEID2
      ) COA_SEGMENT_NAME2
      ,(SELECT COA_SEGMENT_NAME
        FROM AIF_COA_SEGMENTS cs
        WHERE cs.COA_LINE_ID = tiie.IMPSOURCECOALINEID3
      ) COA_SEGMENT_NAME3
      ,(SELECT COA_SEGMENT_NAME
        FROM AIF_COA_SEGMENTS cs
        WHERE cs.COA_LINE_ID = tiie.IMPSOURCECOALINEID4
      ) COA_SEGMENT_NAME4
      ,(SELECT COA_SEGMENT_NAME
        FROM AIF_COA_SEGMENTS cs
        WHERE cs.COA_LINE_ID = tiie.IMPSOURCECOALINEID5
      ) COA_SEGMENT_NAME5
      ,(SELECT CASE mdd.ORPHAN_OPTION_CODE
          WHEN 'CHILD' THEN 'N'
          WHEN 'ROOT' THEN 'N'
          ELSE 'Y'
        END DIMENSION_FILTER_FLAG
        FROM AIF_MAP_DIM_DETAILS_V mdd
        ,AIF_MAPPING_RULES mr
        WHERE mr.PARTITIONKEY = tpp.PARTITIONKEY
        AND mdd.RULE_ID = mr.RULE_ID
        AND mdd.DIMENSION_ID = adim.DIMENSION_ID
      ) DIMENSION_FILTER_FLAG
      ,tiie.IMPCONCATCHAR
      FROM TPOVPARTITION tpp
      INNER JOIN AIF_TARGET_APPL_DIMENSIONS adim
        ON adim.APPLICATION_ID = 2
      INNER JOIN AIF_DIMENSIONS dim
        ON dim.DIMENSION_ID = adim.DIMENSION_ID
      LEFT OUTER JOIN TBHVIMPITEMERPI tiie
        ON tiie.IMPGROUPKEY = tpp.PARTIMPGROUP
        AND tiie.IMPFLDFIELDNAME = adim.BALANCE_COLUMN_NAME
        AND tiie.IMPMAPTYPE = 'ERP'
      WHERE tpp.PARTITIONKEY = 1
      AND adim.BALANCE_COLUMN_NAME IS NOT NULL
      ORDER BY adim.BALANCE_COLUMN_NAME
2013-11-08 11:49:14,407 DEBUG [AIF]: {'APPLICATION_ID': 2L, 'IMPORT_FROM_SOURCE_FLAG': u'N', 'PLAN_TYPE': None, 'RULE_NAME': u'VISIONRULE', 'ACTUAL_FLAG': u'A', 'IS_INCREMENTAL_LOAD': False, 'EPM_ORACLE_INSTANCE': u'C:\\Oracle\\Middleware\\user_projects\\epmsystem1', 'CATKEY': 1L, 'BAL_SEG_VALUE_OPTION_CODE': u'ALL', 'INCLUDE_ADJ_PERIODS_FLAG': u'N', 'PERIOD_MAPPING_TYPE': u'EXPLICIT', 'SOURCE_SYSTEM_TYPE': u'EBS_R12', 'LEDGER_GROUP': None, 'TARGET_APPLICATION_NAME': u'OASIS', 'RECALCULATE_FLAG': u'N', 'SOURCE_SYSTEM_ID': 2L, 'TEMP_DATA_TABLE_NAME': 'TDATASEG_T', 'KK_FLAG': u'N', 'AMOUNT_TYPE': u'MONETARY', 'EXPORT_TO_TARGET_FLAG': u'Y', 'DATA_TABLE_NAME': 'TDATASEG', 'DIMNAME_LIST': [u'ACCOUNT', u'ENTITY', u'ICP', u'UD1', u'UD2', u'UD3', u'UD4'], 'TDATAMAPTYPE': 'ERP', 'LAST_UPDATED_BY': u'admin', 'DIMNAME_MAP': {u'UD3': {'IMPCONCATCHAR': None, 'TARGET_DIMENSION_CLASS_NAME': u'Generic', 'COA_SEGMENT_NAME5': None, 'COA_SEGMENT_NAME1': u'SEGMENT5', 'COA_SEGMENT_NAME2': None, 'COA_SEGMENT_NAME3': None, 'DIMENSION_FILTER_FLAG': None, 'COA_SEGMENT_NAME4': None, 'DIMNAME': u'UD3', 'DIMENSION_ID': 9L}, u'ICP': {'IMPCONCATCHAR': None, 'TARGET_DIMENSION_CLASS_NAME': u'ICP', 'COA_SEGMENT_NAME5': None, 'COA_SEGMENT_NAME1': u'SEGMENT7', 'COA_SEGMENT_NAME2': None, 'COA_SEGMENT_NAME3': None, 'DIMENSION_FILTER_FLAG': None, 'COA_SEGMENT_NAME4': None, 'DIMNAME': u'ICP', 'DIMENSION_ID': 8L}, u'ENTITY': {'IMPCONCATCHAR': None, 'TARGET_DIMENSION_CLASS_NAME': u'Entity', 'COA_SEGMENT_NAME5': None, 'COA_SEGMENT_NAME1': u'SEGMENT1', 'COA_SEGMENT_NAME2': None, 'COA_SEGMENT_NAME3': None, 'DIMENSION_FILTER_FLAG': None, 'COA_SEGMENT_NAME4': None, 'DIMNAME': u'ENTITY', 'DIMENSION_ID': 12L}, u'UD2': {'IMPCONCATCHAR': None, 'TARGET_DIMENSION_CLASS_NAME': u'Generic', 'COA_SEGMENT_NAME5': None, 'COA_SEGMENT_NAME1': u'SEGMENT4', 'COA_SEGMENT_NAME2': None, 'COA_SEGMENT_NAME3': None, 'DIMENSION_FILTER_FLAG': None, 'COA_SEGMENT_NAME4': None, 'DIMNAME': u'UD2', 'DIMENSION_ID': 11L}, u'UD4': {'IMPCONCATCHAR': None, 'TARGET_DIMENSION_CLASS_NAME': u'Generic', 'COA_SEGMENT_NAME5': None, 'COA_SEGMENT_NAME1': u'SEGMENT6', 'COA_SEGMENT_NAME2': None, 'COA_SEGMENT_NAME3': None, 'DIMENSION_FILTER_FLAG': None, 'COA_SEGMENT_NAME4': None, 'DIMNAME': u'UD4', 'DIMENSION_ID': 1L}, u'ACCOUNT': {'IMPCONCATCHAR': None, 'TARGET_DIMENSION_CLASS_NAME': u'Account', 'COA_SEGMENT_NAME5': None, 'COA_SEGMENT_NAME1': u'SEGMENT3', 'COA_SEGMENT_NAME2': None, 'COA_SEGMENT_NAME3': None, 'DIMENSION_FILTER_FLAG': None, 'COA_SEGMENT_NAME4': None, 'DIMNAME': u'ACCOUNT', 'DIMENSION_ID': 10L}, u'UD1': {'IMPCONCATCHAR': None, 'TARGET_DIMENSION_CLASS_NAME': u'Generic', 'COA_SEGMENT_NAME5': None, 'COA_SEGMENT_NAME1': u'SEGMENT2', 'COA_SEGMENT_NAME2': None, 'COA_SEGMENT_NAME3': None, 'DIMENSION_FILTER_FLAG': None, 'COA_SEGMENT_NAME4': None, 'DIMNAME': u'UD1', 'DIMENSION_ID': 7L}}, 'TARGET_APPLICATION_TYPE': u'HFM', 'PARTITIONKEY': 1L, 'PARTVALGROUP': u'[NONE]', 'LEDGER_GROUP_CODE': u'SINGLE', 'INCLUDE_ZERO_BALANCE_FLAG': u'N', 'EXECUTION_MODE': u'SNAPSHOT', 'PLAN_NUMBER': 0L, 'PS_LEDGER': None, 'BALANCE_SELECTION': u'FUNCTIONAL', 'BALANCE_AMOUNT_IS': u'PERIODIC', 'RULE_ID': 1L, 'BALANCE_AMOUNT_BS': u'YTD', 'CURRENCY_CODE': None, 'SOURCE_ADAPTER_FLAG': u'N', 'BALANCE_METHOD_CODE': u'STANDARD', 'SIGNAGE_METHOD': u'SAME', 'WEB_SERVICE_URL': u'http://localhost:9000/aif', 'DATA_LOAD_METHOD': u'CLASSIC_VIA_EPMI'}
2013-11-08 11:49:14,407 DEBUG [AIF]: CommData.getRuleInfo - END
2013-11-08 11:49:14,407 DEBUG [AIF]: CommData.getPovList - START
2013-11-08 11:49:14,407 DEBUG [AIF]:
        SELECT PARTITIONKEY
        ,PARTNAME
        ,CATKEY
        ,CATNAME
        ,PERIODKEY
        ,COALESCE(PERIODDESC, TO_CHAR(PERIODKEY,'YYYY-MM-DD HH24:MI:SS')) PERIODDESC
        ,RULE_ID
        ,RULE_NAME
        FROM (
          SELECT DISTINCT brl.PARTITIONKEY
          ,part.PARTNAME
          ,brl.CATKEY
          ,cat.CATNAME
          ,pprd.PERIODKEY
          ,pp.PERIODDESC
          ,brl.RULE_ID
          ,br.RULE_NAME
          FROM AIF_BAL_RULE_LOADS brl
          INNER JOIN AIF_BALANCE_RULES br
            ON br.RULE_ID = brl.RULE_ID
          INNER JOIN TPOVPARTITION part
            ON part.PARTITIONKEY = brl.PARTITIONKEY
          INNER JOIN TPOVCATEGORY cat
            ON cat.CATKEY = brl.CATKEY
          INNER JOIN AIF_PROCESS_PERIODS pprd
            ON pprd.PROCESS_ID = brl.LOADID
          LEFT OUTER JOIN TPOVPERIOD pp
            ON pp.PERIODKEY = pprd.PERIODKEY
          WHERE brl.LOADID = 22
        ) q
        ORDER BY PARTITIONKEY
        ,CATKEY
        ,PERIODKEY
        ,RULE_ID
2013-11-08 11:49:14,409 DEBUG [AIF]: CommData.getPovList - END
2013-11-08 11:49:14,409 DEBUG [AIF]: CommData.updateWorkflow - START
2013-11-08 11:49:14,409 DEBUG [AIF]:
    SELECT tlp.PROCESSSTATUS
    ,tlps.PROCESSSTATUSDESC
    ,CASE WHEN (tlp.INTLOCKSTATE = 60) THEN 'Y' ELSE 'N' END LOCK_FLAG
    FROM TLOGPROCESS tlp
    ,TLOGPROCESSSTATES tlps
    WHERE tlp.PARTITIONKEY = 1
    AND tlp.CATKEY = 1
    AND tlp.PERIODKEY = '2012-01-01'
    AND tlp.RULE_ID = 1
    AND tlps.PROCESSSTATUSKEY = tlp.PROCESSSTATUS
2013-11-08 11:49:14,410 DEBUG [AIF]:
        UPDATE TLOGPROCESS
        SET PROCESSENDTIME = CURRENT_TIMESTAMP
        ,PROCESSSTATUS = 30
          ,PROCESSENTLOAD = 0
          ,PROCESSENTVAL = 0
          ,PROCESSENTLOADNOTE = NULL
          ,PROCESSENTVALNOTE = NULL
        WHERE PARTITIONKEY = 1
        AND CATKEY = 1
        AND PERIODKEY = '2012-01-01'
        AND RULE_ID = 1
2013-11-08 11:49:14,411 DEBUG [AIF]: CommData.updateWorkflow - END
2013-11-08 11:49:14,412 DEBUG [AIF]:
    SELECT COALESCE(usr.PROFILE_OPTION_VALUE, app.PROFILE_OPTION_VALUE, site.PROFILE_OPTION_VALUE) PROFILE_OPTION_VALUE
    FROM AIF_PROFILE_OPTIONS po
    LEFT OUTER JOIN AIF_PROFILE_OPTION_VALUES site
      ON site.PROFILE_OPTION_NAME = po.PROFILE_OPTION_NAME
      AND site.LEVEL_ID = 1000
      AND site.LEVEL_VALUE = 0
      AND site.LEVEL_ID <= po.MAX_LEVEL_ID
    LEFT OUTER JOIN AIF_PROFILE_OPTION_VALUES app
      ON app.PROFILE_OPTION_NAME = site.PROFILE_OPTION_NAME
      AND app.LEVEL_ID = 1005
      AND app.LEVEL_VALUE = NULL
      AND app.LEVEL_ID <= po.MAX_LEVEL_ID
    LEFT OUTER JOIN AIF_PROFILE_OPTION_VALUES usr
      ON usr.PROFILE_OPTION_NAME = usr.PROFILE_OPTION_NAME
      AND usr.LEVEL_ID = 1010
      AND usr.LEVEL_VALUE = NULL
      AND usr.LEVEL_ID <= po.MAX_LEVEL_ID
    WHERE po.PROFILE_OPTION_NAME = 'JAVA_HOME'
2013-11-08 11:49:14,413 DEBUG [AIF]: HFM Load command:
%EPM_ORACLE_HOME%/products/FinancialDataQuality/bin/HFM_LOAD.vbs "22" "a9E3uvSJNhkFhEQTmuUFFUElfdQgKJKHrb1EsjRsL6yZJlXsOFcVPbGWHhpOQzl9zvHoo3s%2Bdq6R4yJhp0GMNWIKMTcizp3%2F8HASkA7rVufXDWEpAKAK%2BvcFmj4zLTI3rtrKHlVEYrOLMY453J2lXk6Cy771mNSD8X114CqaWSdUKGbKTRGNpgE3BfRGlEd1wZ3cra4ee0jUbT2aTaiqSN26oVe6dyxM3zolc%2BOPkjiDNk1MqwNr43tT3JsZz4qEQGF9d39DRN3CDjUuZRPt4SEKSSL35upncRJiw2uBOtV%2FvSuGLNpZ2J79v1%2Ba1Oo9c4Xhig7SFYbE6Jwk1yXRJLTSw0DKFu%2FEpcdjpOnx%2F6YawMBNIa5iu5L637S91jT1Xd3EGmxZFq%2Bi6bHdCJAC8g%3D%3D" "C%3A%5COracle%5CMiddleware%5Cuser_projects%5Cepmsystem1" "%25EPM_ORACLE_HOME%25%2F..%2Fjdk160_35"
Is there anywhere we need to set EPM Home and also let me know what is PSU1 ?
Thanks in advance.
Praneeth

Load data from a staging table into an actual table by using flag value

I am in need of a quick and dirty pl/sql code to read the staging table "STG_TABLE, row by row and load data into a PROD_TABLE. The load should fail entirely, that is a rollback should occur when there an error occurs during record inserting into a production table using a flag value of Y as successful completion and N as a failure.
Any suggestions?

Hi,
It sounds as if you want something like:
BEGIN
    :ok_flag := 'N';
    INSERT INTO prod_table (col1, col2, ...)
     SELECT               col1, col2, ...
     FROM     stg_table;
    :ok_flag := 'Y';
END;ROLLBACK happens automatically in the event of an error.
Instead of a bind variable for ok_flag, you could use some other kind of variable defined outside the scope of this PL/SQL code.
Edited by: Frank Kulash on Jun 5, 2012 10:47 PM

Loading data from two flat files into one table

Hi All,
I want to load few fields from one file and few fields from another file and load the data into one table in the database.
For Ex: I have two flat files file1.csv and file2.csv and file1.csv containes 25 columns and file2.csv containes 12 columns, i want to load 20 columns from file1.csv and 7 columns from file2.csv into the table
how to combine the columns from both the files and load them into one table at a time?
Any help is appriciated
Thanks
R.G

Use external tables.
If using Oracle9 or higher connect both your csv with database as separate external tables and load the requited fields in new/requited table.

To load data from a cube in SCM(APO) system to a cube in BI system.

Experts,
Please let me know whether it is possible to load data from a cube in SCM(APO) system to a cube in BI system.If so explain the steps to perform.
Thanks,
Meera

Hi,
Think in this way,
To load the data fro any source we need datasource Ok. You can genare Export data source for Cube in APO, then use that datasource for BW extraction, try like this. I think it will work, in my case I'm directly loading data from APO to BW using the DataSource sthat are genaraed on Planning Area.
Why you need to take data from APO cube?. Is there any condition for that?. If it is not mandatory, you can use the dame datasource and load the data to BW, if they have any conditions while loading the data from APO to APO cube, they you try check wherther it is possible in BW or not. If possible then you use DataSource and do the same calculation in BW directly.
Thanks
Reddy

Loading data from flat file...

Hello,
I am actually experiencing a problem where I cant load data from a flat file into a table. I have actually reverse engineered the flat file into ODI. But the thing is I don't know how to load the data that is reversed into a RDBMS table. Added, I don't know how create this RDBMS table form within ODI to be reflected on the DB. Added, don't know how to load the data from the flat file onto this table without having to add the columns in order to map between the flat file and the table.
In conclusion, I need to know how to create an RDBMS table from within ODI on the database. And how to automatically map the flat file to the DB table and load the data into the DB table.
Regards,
Hossam

Hi Hossam,
We can used ODI procedure to create table in the DB.
Make sure you keep the column name in the table name same as the column name in FLAT FILE so that it can automatically map the column.
and regarding Loading data from FLAT File i.e. our source table is FLAT FILE till ODI 10.1.3.4 we need to manually insert the datastore since the file system cannot be reversed.
Please let me know Hossam if i can assis you further.
Thanks and Regards,
Andy

Load data from file and send to background

Hello, is it possible to load data from a file on the presentation server and then create a batch input to call a transaction with those values but on background NOT using data set?
Thanks in advance.

U can surely design the process to be executed in various ways..one of them is as below ::
Upload ABAP.
1. It reads the file from the presentation server and exports it into INDX database with a specific filename.
2. Updates a ztable with user/upload date and time/filename/status=U.
Batch ABAP.
1. It reads the ztable for all the files with status=U.
2. Using the filename IMPORTS the data from INDX database.
3. Creates the batch input to call transaction.
4. Sets the status as process along with process date and time.
With the above you can have multiple uploading data and batch job picking up each file and doing the needful.
Regards
Anurag

How to load data from oracle table to XML using ODI ?

Hello Team
I am trying to load data from an oracle table to an xml file. I have configured the physical and the logical schemas for the same. I have used SQL to SQL as LKM and SQL to SQL Append as IKM with Sunopsis Memory Engine as staging area.
After this, when I am executing the interface, it is executed without any errors but to my surprise I am not finding the relevant data in the xml file. What could be the reason ?
Please look into this and lemme know how to solve it.
Thanks.

908458 wrote:
Hello Phanikanth
Even IKM SQL Control Append is not solving the problem. There are many " order columns" in the target xml table. I have not mapped them or specified any order. Does the problem persist because of this ?
Thanks
Manoj
Ocle to XML file loading issue in ODI 10.1.3.5

Loading data from oracle table to text file........

how can i load data from a oracle table to a text file or CSV file using PL/SQL procedures where the pls/sql code will take the table name dynamically.........
soumen

Try this thread..
Is it possible to export a pl/sql region as a csv file?

Loading data from Z table to an ODS in BW/BI

Hello Gurus,
Can some one guide me how do I load data from a Z table which exists in the same BI system into an ODS/DSO. I'm working on a 04S system.
Your help is highly appreciated.
Thanks & Regards,
Prashanth

hi Prasanth
u r using generic extraction method to load data from R/3 to BW server
u can use
T.Code SBIW or RSO2 to create Generic DataSource.
step 1- logon to R/3 system
step2 - check data in table
     for this use t.code se11.
Db table name --- ZXXXXX.
1.     select " Display " button.
2.     select " contents"(shftctrlf11).--->execute.
*step-3 *- create generic datasource for trasactiona data
     enter t.code- rso2
     select t.data -
zXXXXX.(specify ur datasource name to create a new one).
     select create icon.
     appl.. component --- (browse and choose ur application component)(EX- sd).
     Extration from DBView"
     table/view---zXXXXX(give ur ztable name).
     text----give sht .des, m.des, L .des.......... for u data source.
     Select generic delta option in toolbar.
     Give delta specific field
     Field name---- (ex- pid)
     Select any radio button(ex-numeric pointer).
     Settings additive delta radio button( for delta loads from ods to i.cube).
     Select save save .
     Package -
some package name.
     Save
     Continiue
     Coustomize the datasource by seleting selection check boxes for fields.
     Save
     MSg:- datasource hve been created.
SAP BW side:
Step :1
Enter t.code rsa13.
     Identify R/3 source system icon.
     Double click on R/3 s . system.
     Expand BW datasource
     Expand sap Appl. Comp..
     Select ur application component( for Ex- SD).
     Context menu -- replicate datasource
     Refresh tree once the replication is complete.
     Find ur datasource.
     Double click on data source icon { this implies data source is not assigned).
     Context menu
     Assign infosource..
     i.source assignment:
o     select others radio button
o     and select optioncreate.
     Flexible update.-------XXXXX
     Des----XXXXXX
     Continue
     Create I.Obj w .r t r/3 s.s fields.
     Assign the I.Obj to the fields of r/3 respectively.
     Enter 0RECORDMODE in comm.. structure.
       Activate
     create ODS obj and create structure and activate
     create update rules for Ods object with reference to i.source. and activate.
     Create infopackage and schedule data.and monitor the data in psa and ods objects tables.

Is it possible to load data at aggregated level directly

Hi All,
My question may sound vague but still would like to clarify this.
Is it possible to load data at some higher level than the leaf level? The reason for asking this question is that we are facing severe performance issues while loading the cube.
We are trying to reduce the number of members which inturn can reduce the loading time. On this attempt to reduce the number of members client said that there are 3 million leaf members(out of 4.3 million total members) for which they do not bother if they appear on report or not but they want to see the total value correct. i.e. the dimension will be only loaded with 1.3 million(4.3 - 3) members but the total can still be correct(including the 3 million leaf members).
Is it possible to have two loads one at leaf level only and other at parents and above levels.
DB - 10.2.0.4
Also I want to know when do we use allocmap? how does this work?
Regards,
Brijesh
Edited by: BGaur on Feb 13, 2009 3:33 PM

Hi Carey,
Thanks for your response.
I worked on your suggestion and I could able to load data at higher level for a value based hierarchy. But I met with a other problem while doing this.
I am describing this as a level based but while loading we are converting to value based hierarchy.
we have following levels in the customer dimension having two hierarchy
hier1
lvl1
lvl2
lvl3
lvl4
lvl5
prnt
leaf
hier2
level1
level2
level3
level4
prnt
leaf
so prnt and leaf is common levels are common in both the hierarchies but we were facing multipath issues in second hierarchy and we work around it by concatenating the level name.
In attemp to decrease the number of this dimension member(currrently 4.3 million) business suggested that there are some kind of customer for which they dont want to see the data at leaf and prnt level instead the level4 or lvl5 should have the total consisting of those members. So by this way we need not to load those members and they were making up 2.4 million out of 4.3
To implement above I did following.
1. Created six hierarchies.
one to have members from level4 till level1
second to have members from lvl5 till lvl1
third to have all members of hier1
fourth to have all members of hier2
fifth will have leaf and prnt of hier1
sixth will have leaf and prnt of hier2
In fifth and sixth hierarchy leaf is common but prnt is different due to the concatenation.
In the cube I am selecting the aggregation hierarhies as first,second,fifth and sixth. hierarchies third and fourth will be used for viewing the data.
Fact will have data corresponding for leaf level data,level4 and lvl5.
The challenge I am facing is that if there is some fact value for leaf level loaded through relational fact but no value being loaded through fact for lvl5 or level4 I am not seeing the total value as leaf value is aggregating till prnt level and no value at level4 or lvl5 so same is propagated till lvl1 and level1.
I tried to be as clear as possible but still if there is any confussion pls update the thread. I understand that the approach is vague but I am not seeing any other way.
Thanks
Brijesh

AWM dimension mapping - is it possible to load data from two input tables ?

Similar Messages

Maybe you are looking for