AWS HANA ABAP and sap logon pad

I am looking to consume HANA views with ABAP (as demostrated here SAP HANA Academy - ABAP: How to consume HANA procedures in ABAP - YouTube )
I have an AWS account with a HANA installation running with which I have connected with HANA Studio (rev 80) successfully.
The SAP GUI 730 (Patch 4 Hotfix 2) is installed and I have also successfully installed Eclipse Kepler (in accordance with this guide Step-by-step Guide to setup ABAP on HANA with E... | SCN )
When I try to create an ABAP project I am asked to either use the connection details in the SAP logon pad or connect manually. I have not maintained the logon pad details and hence wish to connect manually.
Here is where it gets fuzzy to me. In order to connect with my HANA instance what do I enter as:
- Application server? The IP-address of the HANA instance, right?
- Instance number?
- System-Id?
- SAP router string?
I assume that this is all information that is available with my AWS instance, but I dont know where to find it. Furthermore, I am assuming that no additional components are required in my set-up. If this assumption is wrong please indicate what is missing.
I greatly appreciate any support.
Thanx

Problem solved!

Similar Messages

Error while using SAP Logon PAD

Hii,
This is not an ABAP related doubt but a general one.
I am getting an error 'The Procedure entry point RfcResetTraceDir could not be located in the dynamic link library LIBRFC32.dll. when am clicking on sap logon pad.
Does anyone knw y this error is coming.I have changed my old sys so may something is missing here.
Can u please help.
Many Thanks

Hi Neeraj,
You need to consult with the BASIS team . They are resoponsible to handle this problem. You might some patch installed on your system.
Thanks,
Chidanand

Can't get SAP logon pad to work.

I've tried installing the latest version of SAP on a PC running XP, and got this error when I double click on the SAP logon pad:
C:\Program Files\SAP\SapSetup\setup\SAL\saplgpad.s8l
This action is only valid products that are currently installed.
This PC may have had an older version of SAP that was not properly uninstalled. I've tried reinstall the new version several times. I tried a registry cleaner after removing SAP, but that did help either. Any other suggestions? Thanks.
Mark

Hi Mark
Kindly check the Microsoft dot-net frame work. because some of the same Sap application require to install the latest Dotnet frame work.
Regards
Sriram

Where do i find daily posted question on sap abap and sap webdynpro abap

Hi
where do we find Daily posted questions on sap abap and sap webdynpro abap in scn sap so that i can go through the questions and answer them .

Hi,
Go to the Content tab of any space and click on discussions. Then you can sort them by date created or any other
For ex: This link for WDA discussions: - Web Dynpro ABAP
You can also click on Receive email notifications for any space to get updates on that space.
hope this helps,
Regards,
Kiran

Diff. bet ABAP and SAP Query

HI
Anybody can explain in detail about ABAP and SAP Query.....
And tell me what is the main diff. bet ABAP and SAP Query...
Regards
S.Baskaran

SAP Query
Purpose
The SAP Query application is used to create lists not already contained in the SAP standard system. It has been designed for users with little or no knowledge of the SAP programming language ABAP. SAP Query offers users a broad range of ways to define reporting programs and create different types of reports such as basic lists, statistics, and ranked lists.
Features
SAP Query's range of functions corresponds to the classical reporting functions available in the system. Requirements in this area such as list, statistic, or ranked list creation can be met using queries.
All the data required by users for their lists can be selected from any SAP table created by the customer.
To define a report, you first have to enter individual texts, such as titles, and select the fields and options which determine the report layout. Then you can edit list display in WYSIWYG mode whenever you want using drag and drop and the other toolbox functions available.
ABAP Query, as far as I Believe, is the use of select statements in the ABAP Programming. This needs a knowledge of Open SQL commands like Select,UPdtae, Modify etc. This has to be done only by someone who has a little bit of ABAP experience.
To sum up, SAP queries are readymade programs given by SAP, which the user can use making slight modification like the slection texts, the tables from which the data is to be retrieved and the format in which the data is to be displayed.ABAP queries become imperative when there is no such SAP query existing and also when there is a lot of customizing involved to use a SAP Query directly.
Check out these links.
http://help.sap.com/saphelp_46c/helpdata/en/35/26b413afab52b9e10000009b38f974/content.htm
http://www.thespot4sap.com/Articles/SAP_ABAP_Queries_Introduction.asp
Step-by-step guide for creating ABAP query
http://www.sappoint.com/abap/ab4query.pdf
ABAP query is mostly used by functional consultants.
Kindly reward points by clicking the star on the left of reply,if it helps.Kindly close your previous threads if your problem is solved and reward points for helpful answers.
Don't forget to reward if useful...

Difference between SAP BC ABAP and SAP ABAP Training

What is the basic difference between SAP BC ABAP and SAP ABAP Training ?
Can any one answer these? I am little confused about the learning material I searched on internet and the course provided. It has similar topics but different name. I have course like SAP ABAP ECC 6.0 (TAW10 and TAW12) but on search I also found SAP BC ABAP beside this.

Hello
SAP BC means SAP Business Connector
http://help.sap.com/saphelp_nw04/helpdata/en/6f/1bd5c2a85b11d6b28500508b5d5211/content.htm
http://en.wikipedia.org/wiki/SAP_Business_Connector
So you can know SAP BC ABAP is ABAP for SAP BC
SAP ABAP/4 is a program lanuague
https://en.wikipedia.org/wiki/ABAP
For ABAP certification
TAW10 and 12 are the right materials.
Regards

PDF document not open and SAP logon closed by CV04N,

Hello,
When I try to open the PDF document by transaction CV03N/CV04N, it's crash the SAP login.
Please give anybody solution for this issue to fix
Thank
Surya

Hi Surya,
is it the same with CV03 as well?
Is it the same crash using Display Document WebUI? (if you have EhP5+)
You can uninstall your Adobe Reader from your computer and download the latest version from here:
https://get.adobe.com/hu/reader/
Which SAP Logon version do you have? You may have to upgrade it too.
Best regards
Tamas

WebSAPConsole , telnet serever ,RF terminal and SAP logon screen

What would be the easiest way to connect RF terminal(character based) to an SAP system.
Of course it is via WebSAPconsole. As far as I red WebSAPconsole guide if I want to use it to connect character based RF terminal is the same as preaviously SAPconsole(under e.g.SAP enterprise 4.7 ext2.)
1.st install telnet server (best SLnet 2.6RF from Seattle LABS) and then configure In SAP console administrator in Control panel entered corresponding system ip,sysnr and transaction code(from saplogon)
However on RF terminal SAP logon screen does not appear. But only telnet prompt.
What to do? Should the telnet server and SAP console be on an other machine than SAP server(ECC6)?

Hi Thomas Kremer,
Can you help me to solve this issue!?
I´m facing with same error then you. I did a homogenous system copy and after I finish this SAPINST I install the saplogon and of course I try to accede to SAP system and the first thing that display in system is that short dump --> dynpro_itab_error
What´s this?! How you solve this issue... can you remmember? (I know that already was a two years ago but even so if you remember this can you share with me!?).
Best regards,
João Dimas - Portugal

Batch file for End Users SAP logon pad update.

Hi All,
We need to make sure that some of the new systems are updated in the end users logon pad. I know that on the logon pad itself a user can create an entry for the new Server but is it possible to create a batch file that will automatically update the logon pad, when ran.
If yes, then can someone guide me on the steps.

the logon pad relies on a few files:
saplogon.ini
sapmsg.ini
and another one less used:
sapgraph.ini
so, all you have to do is to copy these files from a distribution server, upon the next saplogon restart, it will use the new config.

SAP logon pad with NCo and visual studio 2003

Hi All,
I'm struggling to find a way in visual studio 2003 utilising the dot net connector to allow the user to select the SAP system, client user name and password in a similar way that happens when done with activeX controls.
E.g. with ActiveX this sort of code:
Dim sapConn As Object 'Declare connection object
Set sapConn = CreateObject("SAP.Functions") 'Create ActiveX object
If sapConn.Connection.Logon(0, False) <> True Then
The false in the last line prevents a silent logon i.e. a little pop up window is created with the server, client etc. for the user to select and fill in.
I have been trying to use methods like availabledestinations and getdestinationbyname as well as the destinationname property of the saplogon proxy I dropped on my form. In fact I can see all the destinations when I drop down on the destinationname property on the proxy logon object. I though of maybe binding this to a list box but I can't seem to get that to work.
I also tried setting the SAPgui value to 0,1 or 2 on the proxy logon object but this had no effect.
Is there not a simple way of doing this similar to the ActiveX approach?
PS. This is a windows forms project and not a web project.
Thanks,
Grant.

Hi Jitesh,
Thanks for the quick response!
I declared _e as an iDictionaryEnumerator, is that correct?
So the code looks like this:
Dim _e As IDictionaryEnumerator
        For Each _destEntry As System.Collections.DictionaryEntry In SapLogonDestination1.AvailableDestinations
            Dim _destText As String = _e.Value.ToString
            Dim _destKey As String = _e.Key.ToString
        Next
I get a Nullreference error: Object reference not set to an instance of an object at the line Dim _destText As String = _e.Value.ToString.
What have I done wrong?
Thanks,
Grant.

Advice on client proxy generation (ABAP and SAP PI)

Hi,
I've set up an ABAP client proxy using the wizard in transaction SE80 in the backend system, released it using transaction SOAMANAGER and tested that it works.
I now want to compare this technical approach against the same scenario using a proxy generated from a SAP PI outbound synchronous message interface.
I have hit the following issues:
1) When I upload the WSDL file (saved from the test web service I exposed from one of our SAP systems) into the Integration Repository, I receive the following error:
"Check Result for Object GetDOB_WSDL Document check found errors Cause: Unable to recognize the loaded document as valid WSDL Tag Policy is not permitted at position portType".
I can remove this error by deleting the tag policy but don't have an answer why this is not supported and whether this is the right approach - this error occurs regardless of which option I choose when saving the WSDL (i.e. portType or binding) or which upload option I select.
2) When I create the proxy in the backend system based on the message interface the objects are all created successfully and generate/activate correctly. As I don't need the PI runtime (no mapping, queuing etc) I go to create the logical port in transaction SOAMANAGER and I receive the error:
SRT Framework exception: The WSDL document is not compatible with proxy class "ZPROXCO_ZFUNC_UPDATE_ADDRESSHI": "Operation(s) Missing ZFuncUpdateAddresshistory"
even though the external operation does exist and is called ZFuncUpdateAddresshistory.
I have no clues as to why this doesn't work other than the generated WSDL file in the ABAP client proxy has the same name for the portType and operation (ZFuncUpdateAddresshistory).
3) Can someone please explain the value at design time over creating the client proxy in SAP PI versus using simply the wizard in the backend ABAP system - is it simply that the interfaces can be held centrally in the IR if desired or the WSDL might already be there and could be used to quickly generate a message interface?
Thanks,
Alan

Hi,
As far as I know, we follow the top down approach in proxy scenarios.
meaning, we first create the interfaces in XI IR and then go to the back end to implement them.
So, you should create a message interface (Probably Manually rather than importing the wsdl from R/3)
in IR and then go to the ERP backend to implement the proxy using the SPROXY transaction.
Coming to your 3rd question, In PI 7.1 you might be knowung that we have something called ESR(Enterprise Service Repository), which has all the services in a single place.This gives us an option of collating all the different enterprise services scattered all over different systems to be in a common repository.
Regards,
Ravi Kanth Talagana

ABAP and SAP R3 documentation

Hi all,
I am looking for ABAP documentation from SAP and also SAP R3 documentation from SAP. I just want to learn enough for XI purposes. Also is there any docuemtnation on SAP R3. I have documentation on RFC,Idoc etc.
Thanks in advance

Hey
have a look at the following for R/3
http://help.sap.com/saphelp_470/helpdata/en/e1/8e51341a06084de10000009b38f83b/frameset.htm
and
http://help.sap.com/saphelp_nw2004s/helpdata/en/22/042578488911d189490000e829fbbd/frameset.htm - RFC/ALE/IDOC/BAPI
for ALE/BAPI etc
for XI if u finish the second link,u would be through,u dont even need first link
thanx
ahmad
Message was edited by:
Ahmad

RFC function and SAP logon window

Hi experts,
i created the report which uses RFC function ( returns some info from dev. system ). Long time it worked without problem, but before several days ( maybe SAP basis did some changes ), when i run the report and is called RFC function, system ask me to log on into the system.
Do you have any idea ?
Thanks in advance
Martin

User ALEREMOTE was locked

ABAP and SAP BW

Hello
I want to write an ABAP Program and get the results/output reported to BW,? Is it possible?.
can anyone kindly suggest some solutions?.
where can I find this info ?.
regards
Shiva

Hi Shiva,
alternatively you could define a transparent table that is fed through your ABAP. You then create a data source with this table for your BW objects.
Regards
RobM

ABAP and SAP B1

I am a tying job in ABAP, as we know that B1is for small and medium organization, so i want to know that if an organization implement B1, will they recriut ABAPers or they need not ?

Hi,
Besides the fact that I know nothing about ABAP, to develop something for B1 (I'm also a developer) you'll have to be able to use an ActiveX (basically, all the B1 interface is done thru 2 ActiveX).
In all the documentation that I've read, all mentioned as supported environment those from Microsoft and particularly these languages: C#, VB.Net, VB6 and sometimes C++.
Regards,
Eric

AWS HANA ABAP and sap logon pad

Similar Messages

Maybe you are looking for