Axis2 client- Exception while processing response from web service

Hi,
My client request is sending the request successfully but on receiving response , it throws the following exceptions:
Exception in thread "main" org.apache.axis2.AxisFault: Must Understand check failed for header http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd : Security
     at org.apache.axis2.engine.AxisEngine.checkMustUnderstand(AxisEngine.java:97)
     at org.apache.axis2.engine.AxisEngine.receive(AxisEngine.java:163)
     at org.apache.axis2.description.OutInAxisOperationClient.handleResponse(OutInAxisOperation.java:364)
     at org.apache.axis2.description.OutInAxisOperationClient.send(OutInAxisOperation.java:417)
     at org.apache.axis2.description.OutInAxisOperationClient.executeImpl(OutInAxisOperation.java:229)
     at org.apache.axis2.client.OperationClient.execute(OperationClient.java:165)
Client using Rampart module for WS-Security, plus addressing module by default which is engaged gloabally in axis2.
Some user suggested me to disable addressing module in axis2 client but no use. Please help!

Check the header that is being generated in the request , I do not think it has all the elements that has been put in the contract , you can print the SOAP request using handlers in Axis2 . check that and also can you post your config file and the actual contract so that i can help

Similar Messages

Exception while calling the dotnet web service.

I have an Axis2-1.3 web client to a dotnet web service. The client makes rapid calls to the webservice. some times it works but often the call fails with the following exception.
org.apache.axis2.AxisFault: com.ctc.wstx.exc.WstxIOException: Connection reset
     at org.apache.axis2.AxisFault.makeFault(AxisFault.java:417)
     at com.somefirm.SystemManagerStub.fromOM(SystemManagerStub.java:2193)
     at com.somefirm.SystemManagerStub.getAllPlayersSettings(SystemManagerStub.java:914)
     at com.ser.services.webclient.Client1$ObjectListener.processMessage(Client1.java:279)
     at com.ser.services.webclient.Client1$ObjectListener.onMessage(Client1.java:174)
     at com.sun.messaging.jmq.jmsclient.MessageConsumerImpl.deliverAndAcknowledge(MessageConsumerImpl.java:338)
     at com.sun.messaging.jmq.jmsclient.MessageConsumerImpl.onMessage(MessageConsumerImpl.java:273)
     at com.sun.messaging.jmq.jmsclient.SessionReader.deliver(SessionReader.java:113)
     at com.sun.messaging.jmq.jmsclient.ConsumerReader.run(ConsumerReader.java:185)
     at java.lang.Thread.run(Thread.java:595)
Caused by: java.lang.Exception: com.ctc.wstx.exc.WstxIOException: Connection reset
     at com.somefirm.Rule$Factory.parse(Rule.java:681)
Caused by: com.ctc.wstx.exc.WstxIOException: Connection reset
     at com.ctc.wstx.sr.StreamScanner.throwFromIOE(StreamScanner.java:683)
     at com.ctc.wstx.sr.BasicStreamReader.next(BasicStreamReader.java:1086)
     at org.apache.axiom.om.impl.llom.OMStAXWrapper.next(OMStAXWrapper.java:927)
     at com.somefirm.Rule$Factory.parse(Rule.java:643)
     ... 14 more
Caused by: java.net.SocketException: Connection reset
     at java.net.SocketInputStream.read(SocketInputStream.java:168)
     at java.io.BufferedInputStream.read1(BufferedInputStream.java:254)
     at java.io.BufferedInputStream.read(BufferedInputStream.java:313)
     at org.apache.commons.httpclient.ContentLengthInputStream.read(ContentLengthInputStream.java:169)
     at java.io.FilterInputStream.read(FilterInputStream.java:111)
     at org.apache.commons.httpclient.AutoCloseInputStream.read(AutoCloseInputStream.java:107)
     at java.io.FilterInputStream.read(FilterInputStream.java:111)
     at java.io.PushbackInputStream.read(PushbackInputStream.java:161)
     at java.io.FilterInputStream.read(FilterInputStream.java:90)
     at com.ctc.wstx.io.UTF8Reader.loadMore(UTF8Reader.java:362)
     at com.ctc.wstx.io.UTF8Reader.read(UTF8Reader.java:110)
     at com.ctc.wstx.io.MergedReader.read(MergedReader.java:101)
     at com.ctc.wstx.io.ReaderSource.readInto(ReaderSource.java:84)
     at com.ctc.wstx.io.BranchingReaderSource.readInto(BranchingReaderSource.java:57)
     at com.ctc.wstx.sr.StreamScanner.loadMoreFromCurrent(StreamScanner.java:1021)
     at com.ctc.wstx.sr.StreamScanner.parseLocalName2(StreamScanner.java:1771)
     at com.ctc.wstx.sr.StreamScanner.parseLocalName(StreamScanner.java:1731)
     at com.ctc.wstx.sr.BasicStreamReader.handleStartElem(BasicStreamReader.java:2912)
     at com.ctc.wstx.sr.BasicStreamReader.nextFromTree(BasicStreamReader.java:2846)
     at com.ctc.wstx.sr.BasicStreamReader.next(BasicStreamReader.java:1019)
     ... 16 more
Can any one please help me?

Hi Durga,
thanks for the reply.
But i did not understand your solution.
here is the code i use...
BAPI__MATERIAL__GET__DETAIL bapi_input = new BAPI__MATERIAL__GET__DETAIL();
bapi_input.setMATERIAL(matnr);
try{
BAPI__MATERIAL__GET__DETAILLocal bapi_local = this.getBAPI__MATERIAL__GET__DETAIL();
BAPI__MATERIAL__GET__DETAIL_dot_Response res = bapi_local.BAPI__MATERIAL__GET__DETAIL(bapi_input);
BAPIMATDOA doa = res.getMATERIAL__GENERAL__DATA();
BAPIRETURN ret = res.getRETURN();
retValue = new Ret();
retValue.setMsg(ret.getTYPE());
}catch (Exception e) {
     e.printStackTrace();
plz lemme know if any thing is wrong with it.
or do i have to configure something on the server to make bapi global.
thnks,
Sudheer.

ValidateXML and response from Web Services

Hi,
I'd like to be able to validate the reponse from a web service invoked via a partner link. I have validateXML true for the PL but that doesn't appear to validate the response. Should it ? Or would I have to come up with a 'manual' method of validating the returned xml ?
Cheers
Rob

I got an exception when I tried to access an expected element in an assign that followed the invoke, but that was all. The response was actuall empty, ie returned
<MyWSOutputVariable>
<part name="parameters" >
<MyWSResponse/>
</part>
</MyWSOutputVariable>

Response from web service

hello,
is there a way to view the response from a web service in a log or something ?
thanks
regards

Hi,
Yes, In transaction SOAMANAGER, you can activate the trace and display the XML payloads.
Regards,
Olivier

Mapping Array string response from Web service

Hi
Need to map the response from a sync call to a WS which contains an array of strings the response message looks like:
- <SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
- <SOAP-ENV:Body>
- <rpl:readAllRecFromDQStrArrayResponse xmlns:rpl="urn:AS400DBAccessVi">
- <rpl:Response xmlns:pns="urn:java/lang">
<pns:String>Row 1</pns:String>
<pns:String>Row 2</pns:String>
<pns:String>Row 3</pns:String>
</rpl:Response>
</rpl:readAllRecFromDQStrArrayResponse>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>
Need to map it to the following MT:
WSResponse
Response String 1..unbounded

Hi Udo
This the the source and target:
SOURCE:
<?xml version="1.0" encoding="ISO-8859-1"?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns="urn:AS400DBAccessWsd/AS400DBAccessVi/rpc" targetNamespace="urn:AS400DBAccessWsd/AS400DBAccessVi/rpc">
<xsd:import namespace="urn:java/lang" />
<xsd:element xmlns:ns1="urn:java/lang" name="Response" type="ns1:ArrayOfString" />
</xsd:schema>
TARGET:
<?xml version="1.0" encoding="ISO-8859-1"?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns="http://dubal.ae/SOP/SD003" targetNamespace="http://dubal.ae/SOP/SD003">
<xsd:element name="executeDQResponse" type="executeDQResponse" />
<xsd:complexType name="executeDQResponse">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
4c98a2b0c22d11dbbd74001125bd7544
</xsd:appinfo>
</xsd:annotation>
<xsd:sequence>
<xsd:element name="String" type="xsd:string" minOccurs="0" maxOccurs="unbounded">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
09d279c0c01011dbb867001641ad833b
</xsd:appinfo>
</xsd:annotation>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:schema>
Thanks

Set listbox items from web service response

Hi All
I am trying to set list box items from a web service response. Couple of issues over here:
1. The user should be able to select multiple items from the list. Hence if I set "Allow multiple values" and set Commit on "exit", then after the web service returns the output, no data is displayed in the listbox. I need to click inside the list box to see the data returned by the web service. How to overcome this..?? ( However this problem (clicking inside the listbox to see the items) does not exist if "Allow multiple values" is unchecked and Commit is set on "Select". )
2. After the list box is filled up, certain default values should be selected. This selection is based on one of the response field (which is actually a table with multiple values... ). Hence, how to capture this response field and set the default values in the above list..??
3. The same case for a dropdown. The values are visible in dropdown. However, a default value should be selected and displayed after returning a response from web service. Again, this default value is dependant on another field in the response as in point no.2
I am trying to use postExecute event as described in [this|http://forms.stefcameron.com/2009/03/23/pre-process-web-service-responses/] link...however not able to achieve the functionality. Please provide suggestions / inputs.
Thanks
Deepak

Hello,
first: I don´t know anything about the right solution. I am unaware of the existence of the solution, because there were quite many of question about this multiple selection problem and I don´t remember a single "answer".
I can recommend you to simplify everything and create the functionality yourself. I have done that before to avoid these "Adobe-standard" problems. If you have a problem with autofill of the object, ask your WS to send you a single string and pass it yourself using scripting (JS).
And if you have problems with multiple selection, create your own field/ object. Get the string of values, parse it, create multiple lines of the dynamic table with some suitable tool to check/ select the rows you need (use checkbox for example, and your text as a table row). This way you can selected anything you want with no problems at all. It wil only cost you some extra work.
Regards, Otto

Error when calling BPEL process from web service client

I have created three projects here ,there're no problem when testing Composite Application(SynchronousSampleApplication) by test case inside this project.
When I create a Java Application(SynchronousSampleApp),inside this project I've created a web service client from file WSDL of BPEL. After that, In Main class, I call an operation from web service client.But have the following error:
Jul 17, 2008 4:48:22 PM synchronoussampleapp.Main main
SEVERE: null
java.rmi.RemoteException: HTTP transport error: java.net.MalformedURLException: For input string: "${HttpDefaultPort}"; nested exception is:
HTTP transport error: java.net.MalformedURLException: For input string: "${HttpDefaultPort}"
at SynSample.SynchronuosSamplePortType_Stub.synchronuosSampleOperation(SynchronuosSamplePortType_Stub.java:83)
at synchronoussampleapp.Main.main(Main.java:24)
Caused by: HTTP transport error: java.net.MalformedURLException: For input string: "${HttpDefaultPort}"
at com.sun.xml.rpc.client.http.HttpClientTransport.invoke(HttpClientTransport.java:140)
at com.sun.xml.rpc.client.StreamingSender._send(StreamingSender.java:96)
at SynSample.SynchronuosSamplePortType_Stub.synchronuosSampleOperation(SynchronuosSamplePortType_Stub.java:67)
... 1 more
Please help me soon. Thanks very much!

Can't anyone help me? I'm using Netbean 6.1 and Glassfish server.
Do I need any additional plugin?

No response from web server after a process ran for 1-2 minutes

Hi,
I have a proven pl/sql code, it took about 2+ minutes to complete in sqlplus.
But when I created a button to process the exactly same code in APex application, the process runs about 2 minutes and
applications bombs with this msg "No Response from web server".
Has anyone gotton this msg before?
Thanks,
Julie

Hi Julie,
See this thread - it may had some extra considerations for you: OHS Webserver Timeout for long running requests
Do you know if your error message is returned at a fixed time each time? You could test this by creating a procedure that sleeps for X amount of time and then vary X to see if you can find a cutoff point for losing the connection.
Also - I assume that your process keeps running on the database, despite the webserver connection being lost?
If it's not a limitation in your httpd.conf file (the default is 5 mins as others have pointed out), then perhaps your network colleagues have set something in your network configuration to kill connections longer than a certain period of time? This is what happened in my case.
Hope this helps.
Alan

Issue of invoke wf_engine function from web service client.

hi,
I want to update work flow item attribute from web service client through soa gateway. but got the below exception:
Error Description Error occured while service was processing.
Error Details oracle.apps.fnd.soa.util.SOAException: ServiceProcessingError: Exception returned from JCA Service Runtime. file:/pim/oracle/DEV/inst/apps/DEV_pimenv/soa/PLSQL/1318/SETITEMATTRTEXT.wsdl [ SETITEMATTRTEXT_ptt::SETITEMATTRTEXT(InputParameters) ] - WSIF JCA Execute of operation 'SETITEMATTRTEXT' failed due to: Error while processing an API interaction execution. An error occurred while processing the interaction for invoking the WF_ENGINE.SETITEMATTRTEXT API. Cause: oracle.tip.adapter.apps.AppsContextValidationException: Cannot set Context ; nested exception is: ORABPEL-11812 Error while processing an API interaction execution. An error occurred while processing the interaction for invoking the WF_ENGINE.SETITEMATTRTEXT API. Cause: oracle.tip.adapter.apps.AppsContextValidationException: Cannot set Context Check to ensure that the XML containing parameter data matches the parameter definitions in the XSD. Contact oracle support if error is not fixable. at oracle.apps.fnd.soa.provider.services.jca.JCAHandler.invoke(JCAHandler.java:173) at oracle.apps.fnd.soa.provider.services.jca.JCAHandler.handleRequest(JCAHandler.java:120)
it indicate " cannot set context". but there is no method of wf_engine api to set it.
Thanks,
Rock

Hi, Buddy,
Did you fix your issue?
Now, I have the same issue, EBS version is 12.1.3. Using Soapui invoking PL/SQL, then go back to SOA monitor to check the error message.
Could you please give me some advises?
Thanks,
Jackie

Facing problem while going to catch return result from web-services.

Hi everybody,
I am new to BPEL. I am facing problem while going to catch the attributes of resultsets returning from web-services(QAS). As far as my knowledge, two types of results it should return - XML entities and another is attributes which is coming as the part of XML entitites. I am able to catch the XML entities, but can't catch the attributes under it. Even, I am not able to see whether web-services returning something within that field.
When, I tried to catch the attribute and store to a temporary varilable using the following code:
*<assign name="AssignQASDoGetAddress1">*
*<copy>*
*<from variable="InvokeQAS_DoSearch_OutputVariable"*
part="body"
query="/ns6:QASearchResult/ns6:QAPicklist/ns6:PicklistEntry/@PostcodeRecoded"/>
*<to variable="temp"/>*
*</copy>*
*</assign>*
but, I am facing the following selectionFailure errors after running it:
*"{http://schemasxmlsoap.org/ws/2003/03/business-process/}selectionFailure" has been thrown.*
-<selectionFailure xmlns="http://schemasxmlsoap.org/ws/2003/03/business-process/">
-<part name="summary">
*<summary>*
empty variable/expression result.
xpath variable/expression expression "bpws:getVariableData('InvokeQAS_DoSearch_OutputVariable', 'body', '/ns6:QASearchResult/ns6:QAPicklist/ns6:PicklistEntry/@PostcodeRecoded')" is empty at line 269, when attempting reading/copying it.
Please make sure the variable/expression result "bpws:getVariableData('InvokeQAS_DoSearch_OutputVariable', 'body', '/ns6:QASearchResult/ns6:QAPicklist/ns6:PicklistEntry/@PostcodeRecoded')"is not empty.
*</summary>*
*</part>*
*</selectionFailure>*
Getting this error it seems to me that web-service is returning nothing, but, it returns something as it has been catched using a method called isPostcodeRecoded() Java Code in Oracle ADF. This method has been used as it should return boolean whereas for catching the xml entities using java code we used the method like getPostcode(), getMoniker().
For your information, we are using Jdeveloper as the development tool for building the BPEL process.
Am I doing any syntax error. Please consider it as urgent and provide me asolution.
Thanks in advance.
Chandrachur.

Thanks Dave and Marc, for your suggestions. Actually what I found is QAS web-service is returning nothing as attributes when the attributes are set to the default value. For example, following is the part of the wsdl of the result which QAS webservice returns.
<xs:element name="QASearchResult">
- <xs:complexType>
- <xs:sequence>
<xs:element name="QAPicklist" type="qas:QAPicklistType" minOccurs="0" />
<xs:element name="QAAddress" type="qas:QAAddressType" minOccurs="0" />
</xs:sequence>
<xs:attribute name="VerifyLevel" type="qas:VerifyLevelType" default="None" />
</xs:complexType>
</xs:element>
<xs:complexType name="QAPicklistType">
- <xs:sequence>
<xs:element name="FullPicklistMoniker" type="xs:string" />
<xs:element name="PicklistEntry" type="qas:PicklistEntryType" minOccurs="0" maxOccurs="unbounded" />
<xs:element name="Prompt" type="xs:string" />
<xs:element name="Total" type="xs:nonNegativeInteger" />
</xs:sequence>
<xs:attribute name="AutoFormatSafe" type="xs:boolean" default="false" />
<xs:attribute name="AutoFormatPastClose" type="xs:boolean" default="false" />
<xs:attribute name="AutoStepinSafe" type="xs:boolean" default="false" />
<xs:attribute name="AutoStepinPastClose" type="xs:boolean" default="false" />
<xs:attribute name="LargePotential" type="xs:boolean" default="false" />
<xs:attribute name="MaxMatches" type="xs:boolean" default="false" />
<xs:attribute name="MoreOtherMatches" type="xs:boolean" default="false" />
<xs:attribute name="OverThreshold" type="xs:boolean" default="false" />
<xs:attribute name="Timeout" type="xs:boolean" default="false" />
</xs:complexType>
<xs:complexType name="PicklistEntryType">
- <xs:sequence>
<xs:element name="Moniker" type="xs:string" />
<xs:element name="PartialAddress" type="xs:string" />
<xs:element name="Picklist" type="xs:string" />
<xs:element name="Postcode" type="xs:string" />
<xs:element name="Score" type="xs:nonNegativeInteger" />
</xs:sequence>
<xs:attribute name="FullAddress" type="xs:boolean" default="false" />
<xs:attribute name="Multiples" type="xs:boolean" default="false" />
<xs:attribute name="CanStep" type="xs:boolean" default="false" />
<xs:attribute name="AliasMatch" type="xs:boolean" default="false" />
<xs:attribute name="PostcodeRecoded" type="xs:boolean" default="false" />
<xs:attribute name="CrossBorderMatch" type="xs:boolean" default="false" />
<xs:attribute name="DummyPOBox" type="xs:boolean" default="false" />
<xs:attribute name="Name" type="xs:boolean" default="false" />
<xs:attribute name="Information" type="xs:boolean" default="false" />
<xs:attribute name="WarnInformation" type="xs:boolean" default="false" />
<xs:attribute name="IncompleteAddr" type="xs:boolean" default="false" />
<xs:attribute name="UnresolvableRange" type="xs:boolean" default="false" />
<xs:attribute name="PhantomPrimaryPoint" type="xs:boolean" default="false" />
</xs:complexType>
here the attributes like FullAddress, PostcodeRecodedare , etc. are not being return by the web-service when it is getting the default value false. But, if it gets true then , it is being displayed at the BPEL console.
Do you have any idea how can I catch the attributes and its value even when it gets the default value which is already set. Previously, it was returning(it was not being displayed at the console).
Thanks once again for your valuable suggestions...!!!
Chandrachur.

Issue with receiving response from web application

Hi,
I have configured B2B with business protocol as 'Custom document document over Internet', document exchange protocol as AS2-1.1 and transport protocol HTTPS1.1 to invoke a web application deployed in Oracle Application server. B2B is able to invoke the web application with HTTPS request which contains an xml.
I have set the acknowledgment mode as 'Sync' and 'Is acknowledgement handled by B2B' as true. But while receiving the response from web application which is an xml, B2B is showing the error as
Description: Unable to identify the document protocol of the message
StackTrace:
Error -: AIP-50083: Document protocol identification error
     at oracle.tip.adapter.b2b.engine.Engine.identifyDocument(Engine.java:3244)
     at oracle.tip.adapter.b2b.engine.Engine.processIncomingMessage(Engine.java:1665)
     at oracle.tip.adapter.b2b.msgproc.Request.postTransmit(Request.java:2382)
     at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequestPostColab(Request.java:1825)
     at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequest(Request.java:974)
     at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1166)
     at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:833)
     at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:400)
     at java.lang.Thread.run(Thread.java:534)
I have added headers as present in the wire message of the request. In B2B, it is showing the wire message for response as follows.
TO_PARTY=XXX
AS2-To=XXX
DOCTYPE_NAME=TestAS2DT
DOCTYPE_REVISION=1.0
Date=Tue, 03 Nov 2009 06:09:22 GMT
AS2-Version=1.1
AS2-From=YYY
Content-Transfer-Encoding=binary
[email protected]
ACTION_NAME=TestAS2_BA
Content-Type=application/xml
Server=Oracle-Application-Server-10g/10.1.3.4.0 Oracle-HTTP-Server
MIME-version=1.0
User-Agent=AS2 Server
FROM_PARTY=YYY
Content-Disposition=attachment; filename=1.0
Connection=Keep-Alive
From=YYY
Keep-Alive=timeout=15, max=100
<?xml version="1.0" encoding="UTF-8"?>
<Books>
<Book>
<BookTitle>Ajax Hacks</BookTitle>
<Author>Bruce W. Perry</Author>
<PubDate>March 2006</PubDate>
</Book>
</Books>
I am able to see the xml sent as response from web application in Payload as follows.
<?xml version="1.0" encoding="UTF-8"?>
<Books>
<Book>
<BookTitle>Ajax Hacks</BookTitle>
<Author>Bruce W. Perry</Author>
<PubDate>March 2006</PubDate>
</Book>
</Books>
I am able to see the HTTP response in b2b_dc_transport.log. In transport log it is not showing any error. Please help me to fix this issue.

Hi,
Request and Response should be part of same agreement. I hope you are not confused between Acknowledgement and Response. Acknowledgement can be received in the same session (sync mode) but Response will always come in a different session and will be treated as a different document. If, for request, party A is initiator and B is responder then for response party B will be initiator and party A will be responder (as Requset and Response are two docs in case of Custom Document)
For configuring X-Path, please refer section 8.3.11 Configuring the XPath Expression for a Custom XML Document at below link -
http://download.oracle.com/docs/cd/B14099_19/integrate.1012/b19370/busact_coll.htm#sthref784
Please let us know whether you are trying to receive a response or Ack?
Regards,
Anuj

Serialization error while returning Value Object from Web Service

Hi
I have developed a sample Web Service (RPC based), it returns Customer Value Object
when client calls getCustomer method.
I have written a Client (attached the client source code) to invoke the web service
when the client invokes the Web Service it throws an Exception , the Exception
Exception in thread "main" serialization error: no serializer is registered for
(null, {java:customer}Customer)
at com.sun.xml.rpc.encoding.DynamicInternalTypeMappingRegistry.getSerializer(DynamicInternalTypeMappingRegistry.java:62)
at com.sun.xml.rpc.encoding.soap.SOAPResponseSerializer.initialize(SOAPResponseSerializer.java:72)
at com.sun.xml.rpc.encoding.ReferenceableSerializerImpl.initialize(ReferenceableSerializerImpl.java:47)
at com.sun.xml.rpc.client.dii.BasicCall.createRpcResponseSerializer(BasicCall.java:382)
at com.sun.xml.rpc.client.dii.BasicCall.getResponseDeserializer(BasicCall.java:364)
at com.sun.xml.rpc.client.dii.BasicCall.invoke(BasicCall.java:259)
at ClientwithWSDL.main(ClientwithWSDL.java:63)
CAUSE:
no serializer is registered for (null, {java:customer}Customer)
at com.sun.xml.rpc.encoding.TypeMappingUtil.getSerializer(TypeMappingUtil.java:41)
at com.sun.xml.rpc.encoding.InternalTypeMappingRegistryImpl.getSerializer(InternalTypeMappingRegistryImpl.java:287)
at com.sun.xml.rpc.encoding.DynamicInternalTypeMappingRegistry.getSerializer(DynamicInternalTypeMappingRegistry.java:47)
at com.sun.xml.rpc.encoding.soap.SOAPResponseSerializer.initialize(SOAPResponseSerializer.java:72)
at com.sun.xml.rpc.encoding.ReferenceableSerializerImpl.initialize(ReferenceableSerializerImpl.java:47)
at com.sun.xml.rpc.client.dii.BasicCall.createRpcResponseSerializer(BasicCall.java:382)
at com.sun.xml.rpc.client.dii.BasicCall.getResponseDeserializer(BasicCall.java:364)
at com.sun.xml.rpc.client.dii.BasicCall.invoke(BasicCall.java:259)
at ClientwithWSDL.main(ClientwithWSDL.java:63)
If someone can help me to fix the issue, it will be great.
Thanks
Jeyakumar Raman.

I guess, this is because the RI client is not finding the
codec to ser/deser your Value Object. You need to register
the codec in the type mapping registry before you invoke
the web service method.
Here is a sample:
Service service = factory.createService( serviceName );
TypeMappingRegistry registry = service.getTypeMappingRegistry();
TypeMapping mapping = registry.getTypeMapping(
SOAPConstants.URI_NS_SOAP_ENCODING );
mapping.register( SOAPStruct.class,
new QName( "http://soapinterop.org/xsd", "SOAPStruct" ),
new SOAPStructCodec(),
new SOAPStructCodec() );
BTW, you can do the same exact thing on the client by using
WLS impl of JAX-RPC. Is there a reason for using RI on the
client side?
regards,
-manoj
"Jeyakumar Raman" <[email protected]> wrote in message news:[email protected]...
Hi Manoj,
Thanks for your information, Yes, my client is Sun's JAX-RPC based, but the Server
Implementation is done using Weblogic 7.0. When I invoke the Client without WSDL.
It works fine without any problem. But when I invoke the webservice using WSDL,
I am getting this problem.
Here is my Client Code :
* This class demonstrates a java client invoking a WebService.
import java.net.URL;
import javax.xml.rpc.ServiceFactory;
import javax.xml.rpc.Service;
import javax.xml.rpc.Call;
import javax.xml.rpc.ParameterMode;
import javax.xml.namespace.QName;
import customer.Customer;
public class ClientwithWSDL {
private static String qnameService = "CustomerService";
private static String qnamePort = "CustomerServicePort";
private static String BODY_NAMESPACE_VALUE =
"http://jeyakumar_3957:7001/Customer";
private static String ENCODING_STYLE_PROPERTY =
"javax.xml.rpc.encodingstyle.namespace.uri";
private static String NS_XSD =
"http://www.w3.org/2001/XMLSchema";
private static String URI_ENCODING =
"http://schemas.xmlsoap.org/soap/encoding/";
private static String method="getCustomer";
private static String endpoint="http://jeyakumar_3957:7001/webservice/CustomerService?WSDL";
public static void main(String[] args) throws Exception {
// create service factory
ServiceFactory factory = ServiceFactory.newInstance();
// define qnames
QName serviceName =new QName(BODY_NAMESPACE_VALUE, qnameService);
QName portName = new QName(BODY_NAMESPACE_VALUE, qnamePort);
QName operationName = new QName("",method);
URL wsdlLocation = new URL(endpoint);
// create service
Service service = factory.createService(wsdlLocation, serviceName);
// create call
Call call = service.createCall(portName, operationName);
// invoke the remote web service
Customer result = (Customer) call.invoke(new Object[0]);
System.out.println("\n");
System.out.println(result);
"manoj cheenath" <[email protected]> wrote:
>
>
>Hi Jayakumar,
>
>From the stack trace it looks like you are using sun's
>RI of JAX-RPC. I am not sure what is going wrong with RI.
>
>WLS 7.0 got its own implementation of JAX-RPC. Check
>out the link below for details:
>
>http://edocs.bea.com/wls/docs70/webserv/index.html
>
>
>Let us know if you need more details.
>
>--=20
>
>regards,
>-manoj
>
>
>
> "Jeyakumar" <[email protected]> wrote in message =
>news:[email protected]...
>
> Hi
>
> I have developed a sample Web Service (RPC based), it returns Customer
>=
>Value Object
> when client calls getCustomer method.
>
> I have written a Client (attached the client source code) to invoke
>=
>the web service
> when the client invokes the Web Service it throws an Exception , the
>=
>Exception
>
>
> Exception in thread "main" serialization error: no serializer is =
>registered for
> (null, {java:customer}Customer)
> at =
>com.sun.xml.rpc.encoding.DynamicInternalTypeMappingRegistry.getSerializer=
>(DynamicInternalTypeMappingRegistry.java:62)
>
> at =
>com.sun.xml.rpc.encoding.soap.SOAPResponseSerializer.initialize(SOAPRespo=
>nseSerializer.java:72)
> at =
>com.sun.xml.rpc.encoding.ReferenceableSerializerImpl.initialize(Reference=
>ableSerializerImpl.java:47)
> at =
>com.sun.xml.rpc.client.dii.BasicCall.createRpcResponseSerializer(BasicCal=
>l.java:382)
> at =
>com.sun.xml.rpc.client.dii.BasicCall.getResponseDeserializer(BasicCall.ja=
>va:364)
> at =
>com.sun.xml.rpc.client.dii.BasicCall.invoke(BasicCall.java:259)
> at ClientwithWSDL.main(ClientwithWSDL.java:63)
>
> CAUSE:
>
> no serializer is registered for (null, {java:customer}Customer)
> at =
>com.sun.xml.rpc.encoding.TypeMappingUtil.getSerializer(TypeMappingUtil.ja=
>va:41)
> at =
>com.sun.xml.rpc.encoding.InternalTypeMappingRegistryImpl.getSerializer(In=
>ternalTypeMappingRegistryImpl.java:287)
> at =
>com.sun.xml.rpc.encoding.DynamicInternalTypeMappingRegistry.getSerializer=
>(DynamicInternalTypeMappingRegistry.java:47)
>
> at =
>com.sun.xml.rpc.encoding.soap.SOAPResponseSerializer.initialize(SOAPRespo=
>nseSerializer.java:72)
> at =
>com.sun.xml.rpc.encoding.ReferenceableSerializerImpl.initialize(Reference=
>ableSerializerImpl.java:47)
> at =
>com.sun.xml.rpc.client.dii.BasicCall.createRpcResponseSerializer(BasicCal=
>l.java:382)
> at =
>com.sun.xml.rpc.client.dii.BasicCall.getResponseDeserializer(BasicCall.ja=
>va:364)
> at =
>com.sun.xml.rpc.client.dii.BasicCall.invoke(BasicCall.java:259)
> at ClientwithWSDL.main(ClientwithWSDL.java:63)
>
> If someone can help me to fix the issue, it will be great.
>
> Thanks
> Jeyakumar Raman.
>
>
><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
><HTML><HEAD>
><META http-equiv=3DContent-Type content=3D"text/html; =
>charset=3Diso-8859-1">
><META content=3D"MSHTML 6.00.2713.1100" name=3DGENERATOR>
><STYLE></STYLE>
></HEAD>
><BODY bgColor=3D#ffffff>
><DIV><FONT face=3DCourier size=3D2>Hi Jayakumar,</FONT></DIV>
><DIV><FONT face=3DCourier size=3D2></FONT> </DIV>
><DIV><FONT face=3DCourier size=3D2>From the stack trace it looks like
>=
>you are using=20
>sun's</FONT></DIV>
><DIV><FONT face=3DCourier size=3D2>RI of JAX-RPC. I am not sure
>=
>what is going=20
>wrong with RI.</FONT></DIV>
><DIV><FONT face=3DCourier size=3D2></FONT> </DIV>
><DIV><FONT face=3DCourier size=3D2>WLS 7.0 got its own implementation
>of =
>
></FONT><FONT face=3DCourier size=3D2>JAX-RPC. Check</FONT></DIV>
><DIV><FONT face=3DCourier size=3D2>out the link below for =
>details:</FONT></DIV>
><DIV><FONT face=3DCourier size=3D2></FONT><FONT face=3DCourier=20
>size=3D2></FONT> </DIV>
><DIV><FONT face=3DCourier size=3D2><A=20
>href=3D"http://edocs.bea.com/wls/docs70/webserv/index.html">http://edocs.=
>bea.com/wls/docs70/webserv/index.html</A></FONT></DIV>
><DIV><FONT face=3DCourier size=3D2></FONT> </DIV>
><DIV><FONT face=3DCourier size=3D2></FONT> </DIV>
><DIV><FONT face=3DCourier size=3D2>Let us know if you need more=20
>details.</FONT></DIV>
><DIV><BR>-- <BR><BR>regards,<BR>-manoj</DIV>
><DIV> </DIV>
><DIV><BR> </DIV>
><BLOCKQUOTE=20
>style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
>BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
> <DIV>"Jeyakumar" <<A=20
> href=3D"mailto:[email protected]">[email protected]</A>>
>=
>wrote in=20
> message <A=20
> =
>href=3D"news:[email protected]">news:[email protected]=
>a.com</A>...</DIV><BR>Hi<BR><BR>I=20
> have developed a sample Web Service (RPC based), it returns Customer
>=
>Value=20
> Object<BR>when client calls getCustomer method.<BR><BR>I have written
>=
>a Client=20
> (attached the client source code) to invoke the web service<BR>when
>=
>the client=20
> invokes the Web Service it throws an Exception , the=20
> Exception<BR><BR><BR>Exception in thread "main" serialization error:
>=
>no=20
> serializer is registered for<BR>(null,=20
> {java:customer}Customer)<BR>
>=
>at=20
> =
>com.sun.xml.rpc.encoding.DynamicInternalTypeMappingRegistry.getSerializer=
>(DynamicInternalTypeMappingRegistry.java:62)<BR><BR> &nb=
>sp; =20
> at=20
> =
>com.sun.xml.rpc.encoding.soap.SOAPResponseSerializer.initialize(SOAPRespo=
>nseSerializer.java:72)<BR> =20
> at=20
> =
>com.sun.xml.rpc.encoding.ReferenceableSerializerImpl.initialize(Reference=
>ableSerializerImpl.java:47)<BR> =
>=20
> at=20
> =
>com.sun.xml.rpc.client.dii.BasicCall.createRpcResponseSerializer(BasicCal=
>l.java:382)<BR> =20
> at=20
> =
>com.sun.xml.rpc.client.dii.BasicCall.getResponseDeserializer(BasicCall.ja=
>va:364)<BR> =20
> at=20
> =
>com.sun.xml.rpc.client.dii.BasicCall.invoke(BasicCall.java:259)<BR> =
> =20
> at ClientwithWSDL.main(ClientwithWSDL.java:63)<BR><BR>CAUSE:<BR><BR>no
>=
>
> serializer is registered for (null,=20
> {java:customer}Customer)<BR>
>=
>at=20
> =
>com.sun.xml.rpc.encoding.TypeMappingUtil.getSerializer(TypeMappingUtil.ja=
>va:41)<BR> =20
> at=20
> =
>com.sun.xml.rpc.encoding.InternalTypeMappingRegistryImpl.getSerializer(In=
>ternalTypeMappingRegistryImpl.java:287)<BR> =
> =20
> at=20
> =
>com.sun.xml.rpc.encoding.DynamicInternalTypeMappingRegistry.getSerializer=
>(DynamicInternalTypeMappingRegistry.java:47)<BR><BR> &nb=
>sp; =20
> at=20
> =
>com.sun.xml.rpc.encoding.soap.SOAPResponseSerializer.initialize(SOAPRespo=
>nseSerializer.java:72)<BR> =20
> at=20
> =
>com.sun.xml.rpc.encoding.ReferenceableSerializerImpl.initialize(Reference=
>ableSerializerImpl.java:47)<BR> =
>=20
> at=20
> =
>com.sun.xml.rpc.client.dii.BasicCall.createRpcResponseSerializer(BasicCal=
>l.java:382)<BR> =20
> at=20
> =
>com.sun.xml.rpc.client.dii.BasicCall.getResponseDeserializer(BasicCall.ja=
>va:364)<BR> =20
> at=20
> =
>com.sun.xml.rpc.client.dii.BasicCall.invoke(BasicCall.java:259)<BR> =
> =20
> at ClientwithWSDL.main(ClientwithWSDL.java:63)<BR><BR>If someone can
>=
>help me=20
> to fix the issue, it will be great.<BR><BR>Thanks<BR>Jeyakumar=20
>Raman.</BLOCKQUOTE></BODY></HTML>
>
>
[att1.html]

Watched folder error - "Exception while getting principal from Directory manager"

Hi! I've been having problems with a LiveCycle ES installation.
I've configured a watched folder that starts a process with an Office
Document, converts it to PDF and applies a Rights Management Policy.
It runs on behalf of an Active Directory user.
Sometimes it works flawlessly, but most of the time it fails, giving a
ridiculously long failure log with the longest trace stacks I've ever
seen in life... resumed:
=======================
ALC-DSC-600-000: com.adobe.idp.dsc.provider.service.scheduler.impl.SchedulerRuntimeException : Failure to invoke the job [watched_folder_endpoint_name]
Caused by: ALC-FEP-011-000: com.adobe.idp.dsc.service.file.impl.FileProviderRuntimeException: Failed to get the context on behalf of user [username], domain [company_domain] for watch folder [watched_folder_endpoint_name]
Caused by: | [com.adobe.idp.um.api.impl.AuthenticationManagerImpl] errorCode:16386 errorCodeHEX:0x4002 message:Exception while getting principal from Directory manager| [IDPLoggedException] errorCode:12801 errorCodeHEX:0x3201 message:Exception while getting principal from Directory manager
chainedException:javax.ejb.TransactionRolledbackLocalException: null;
CausedByException is:
nullchainedExceptionMessage:null; CausedByException is:
null chainedException
trace:javax.ejb.TransactionRolledbackLocalException: null;
CausedByException is:
null
=======================
I vaguely suspect is the server's clock going out of sync with the domain controller's clock, but I tried everything I knew of about it with no consistent results.
It's LiveCycle 8.0.1 SP2 installed on a Windows 2003 Server.
Manual install, JBoss Clustered configuration (the second node is actually turned off for the time being)
SQL Server 2005 as backend Database
Users on Active Directory on a Windows 2003 Server -which is a "copy" of the main domain controller.
Watched folder is in a mounted share of another Windows 2003 Server acting as fileserver.
Any clue will be greatly appreciated!!

Hello,
sorry in advance for my english. i am beginning in Adobe LiveCycle and i think that you can help me : i want to configure a watched folder to automatically convert in pdf file and apply a right management policy. Can you tell me how you configure it ? many thanks in advance. regards

Process as a Web Service WSDL client

Hi,
I am using the Process as a Web Service Option inside of BPM . I launch the deployed webservices webapps and I get the WSDL out of it.. The WSDL works fine with SOAP UI..But when I try to create a web service client out of that WSDL it gives me the following error:-
com.bea.albpm.TestProject.SampleProject.OperationException cannot be resolved as type and the web service client does not work..
how do I resolve this error.. Is there a jar file that I need to import?

Did you use PAPI code inside your web service or did u just use PAPI Web Services ( like did u just pressed the button Launch PAPI Web Services ) and it created the WSDL for you and u used it to create the client?
I am using the latest version of OBPM..
Oracle 10.3.10
Can you let me know what do u mean by PAPI interface.. Is it the PAPI code of is the PAPI Web Service which is built by BPM automatically and could be used?
Edited by: user8707382 on Sep 10, 2009 9:00 AM

No response from Web Server

Hello,
I have installed Oracle9i application server Rel 2,9i Infrastructure & oracle 8i DB on Win 2000 server.The installation was successful.
When I access the browser with http://<hostname>:7777 it works fine, it shows HTTP server welcome page.
Now I am trying to access Portal home page using http://<hostname>:7779/pls/portal
It seems, it searches for the Web site for sometime & then gives the error "No response from Web Server"
What is the problem ?? Is there anything with the services ?? I can see two http servers(apps & infrastructure)in the program listing,is it related with these ??
Please help.I will appreciate your support.
Regards
Sandeep

Hi Sandeep.
Try run EM WebSite running in http://<hostname>:1810.
If you are familiarized with this service it should be easy to solve your problem.
Once you access EM WebSite, you'll see two farms(One for iasdb, and one for Portal). That are some symbols that tell you about the status of Portal. If You see an red arrow pointing down, then you need to access Portal farm to put some services "up".
Choose the link for Portal Farm.
This page shows the status of all Portal components.
For you to get response from your portal http server, there a few of these that must be working.
They are (by order):
1. OC4J_Portal;
2. Web Cache;
3. HTTP Server;
For you to start them, you must (for each one) click on it's radio button an choose start.
With this components "up" you should be able to access Portal.
Some of other components cannot be started by us, because it's radio button is disabled, but Single Sign-On:orasso:7777 must be "up", and
Portal:portal:7778 in my case is "down". The rest of OC4J components are needed for other utilities like deploying components.
Hope i helped you.
Pedro.

Axis2 client- Exception while processing response from web service

Similar Messages

Maybe you are looking for