[b]Urgent How to send XML file from forms 6.0 to a url to access database[/

hi
i need to create an XML with some values file from Oracle Forms 6.0 and then send this XML file To a URL to access the database,which in turn will send me XML file with new values.Can any body help me out as i don't have any ideas
Regards
Sunil

Sunil,
and this must be using a URL and can't be handled by a database stored procedure ?
Anyway, your scenario can be achieved using teh Java Importer in Forms 6i and above. You woudl write a Java program that takes a String and loads it to an URL. It then checks the response URL for its content.
Frank

Similar Messages

How to send xml file from local folder to azure storage

Hi,
My plan is i have xml files which are under folders in my local.
I want to use mobile service to send xml files to azure storage,
how shall i do that, either by c# or mobile service.
If internet stop, I will use my mobile service to transfer all xml files to azure storage and run web job to do to update azure
sql by xml file.
please advice.
Superman

Hi,
You could refer the following link for assistance with uploading image files to Azure Blob Storage using Mobile Services:
http://azure.microsoft.com/en-us/documentation/articles/mobile-services-windows-phone-upload-data-blob-storage/
And for image files you could refer the following link:
http://stackoverflow.com/questions/25977406/upload-a-text-file-with-azure-mobile-services
Regards,
Malar.

How to create xml file from Oracle and sending the same xml file to an url

How to create xml file from Oracle and sending the same xml file to an url

SQL/XML (XMLElement, XMLForest, XMLAgg, etc) and UTL_HTTP.
Whether that works for you with the version of Oracle you have, your requirements, and needs is another story. A little detail goes a long way.

Send xml file from sap to third party url through https

Hi,
I have a requirement to send the xml file from ecc to a 3rd party url through HTTPS. How can we achieve this using ABAP.
Client doesn't have XI enviroment. The client has provided the 3rd party url where the file needs to be uploaded.
Please help ! <removed by moderator>
Thanks in advance.
Regards,
Chitra.K
Edited by: Thomas Zloch on Sep 12, 2011 12:58 PM

Hi Chitra,
I had similar requirement and here is what I did: -
REPORT Z_HTTP_POST_TEST_AMEY.
DATA: L_URL               TYPE                   STRING          ,
      L_PARAMS_STRING     TYPE                   STRING          ,
      L_HTTP_CLIENT       TYPE REF TO            IF_HTTP_CLIENT ,
      L_RESULT            TYPE                   STRING          ,
      L_STATUS_TEXT       TYPE                   STRING          ,
      L_HTTP_STATUS_CODE TYPE                   I               ,
      L_HTTP_LENGTH       TYPE                   I               ,
      L_PARAMS_XSTRING    TYPE                   XSTRING         ,
      L_XSTRING           TYPE                   XSTRING         ,
      L_IS_XML_TABLE      TYPE STANDARD TABLE OF SMUM_XMLTB      ,
      L_IS_RETURN         TYPE STANDARD TABLE OF BAPIRET2        ,
      L_OUT_TAB           TYPE STANDARD TABLE OF TBL1024
MOVE 'https://<hostname>/xxx/yyy/zzz' TO L_URL.
MOVE '<XML as string>' TO L_PARAMS_STRING.
*STEP-1 : CREATE HTTP CLIENT
CALL METHOD CL_HTTP_CLIENT=>CREATE_BY_URL
    EXPORTING
      URL                = L_URL
    IMPORTING
      CLIENT             = L_HTTP_CLIENT
    EXCEPTIONS
      ARGUMENT_NOT_FOUND = 1
      PLUGIN_NOT_ACTIVE = 2
      INTERNAL_ERROR     = 3
      OTHERS             = 4 .
"STEP-2 : AUTHENTICATE HTTP CLIENT
CALL METHOD L_HTTP_CLIENT->AUTHENTICATE
EXPORTING
    USERNAME             = 'testUser'
    PASSWORD             = 'testPassword'.
"STEP-3 : SET HTTP HEADERS
CALL METHOD L_HTTP_CLIENT->REQUEST->SET_HEADER_FIELD
      EXPORTING NAME = 'Accept'
                VALUE = 'text/xml'.
CALL METHOD L_HTTP_CLIENT->REQUEST->SET_HEADER_FIELD
    EXPORTING NAME = '~request_method'
               VALUE = 'POST' .
CALL METHOD L_HTTP_CLIENT->REQUEST->SET_CONTENT_TYPE
    EXPORTING CONTENT_TYPE = 'text/xml' .
"SETTING REQUEST DATA FOR 'POST' METHOD
IF L_PARAMS_STRING IS NOT INITIAL.
   CALL FUNCTION 'SCMS_STRING_TO_XSTRING'
     EXPORTING
         TEXT   = L_PARAMS_STRING
     IMPORTING
           BUFFER = L_PARAMS_XSTRING
     EXCEPTIONS
        FAILED = 1
        OTHERS = 2.
CALL METHOD L_HTTP_CLIENT->REQUEST->SET_DATA
    EXPORTING DATA = L_PARAMS_XSTRING .
ENDIF.
"STEP-4 : SEND HTTP REQUEST
CALL METHOD L_HTTP_CLIENT->SEND
    EXCEPTIONS
      HTTP_COMMUNICATION_FAILURE = 1
      HTTP_INVALID_STATE         = 2.
"STEP-5 : GET HTTP RESPONSE
    CALL METHOD L_HTTP_CLIENT->RECEIVE
      EXCEPTIONS
        HTTP_COMMUNICATION_FAILURE = 1
        HTTP_INVALID_STATE         = 2
        HTTP_PROCESSING_FAILED     = 3.
"STEP-6 : Read HTTP RETURN CODE
CALL METHOD L_HTTP_CLIENT->RESPONSE->GET_STATUS
    IMPORTING
      CODE = L_HTTP_STATUS_CODE
      REASON = L_STATUS_TEXT .
WRITE: / 'HTTP_STATUS_CODE = ',
          L_HTTP_STATUS_CODE,
         / 'STATUS_TEXT = ',
         L_STATUS_TEXT .
"STEP-7 : READ RESPONSE DATA
CALL METHOD L_HTTP_CLIENT->RESPONSE->GET_CDATA
        RECEIVING DATA = L_RESULT .
"STEP-8 : CLOSE CONNECTION
CALL METHOD L_HTTP_CLIENT->CLOSE
EXCEPTIONS
    HTTP_INVALID_STATE = 1
    OTHERS             = 2   .
"STEP-9 : PRINT OUTPUT TO FILE
CLEAR : L_XSTRING, L_OUT_TAB[].
CALL FUNCTION 'SCMS_STRING_TO_XSTRING'
    EXPORTING
      TEXT   = L_RESULT
    IMPORTING
      BUFFER = L_XSTRING
    EXCEPTIONS
      FAILED = 1
      OTHERS = 2.
CALL FUNCTION 'SCMS_XSTRING_TO_BINARY'
EXPORTING
    BUFFER                = L_XSTRING
TABLES
    BINARY_TAB            = L_OUT_TAB .
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
   FILENAME                        = 'C:AMEYHTTP_POST_OUTPUT.xml'
TABLES
    DATA_TAB                        = L_OUT_TAB .
Also, following is the detailed link for use of HTTP_CLIENT class: -
http://help.sap.com/saphelp_nw70ehp1/helpdata/EN/1f/93163f9959a808e10000000a114084/content.htm
Also, in below link, you can ignore XI specific part and observe how its sending XML to external URL:-
(I know it describes call to SAP XI server's URL, but it can be used to call any URL)
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/ae388f45-0901-0010-0f99-a76d785e3ccc
In addition to all above, following configs to be present at ABAP application server: -
1. The hostname used to URL should be present in SAP ABAP application server's 'hosts' file.
2. Security certificate (if available) for URL to be called must be installed in SAP ABAP application server.
Let me know if you achieve any progress with it...

How to send a file from FTP to external server

My requirement is to send a file from FTP to D3(External) server.
Now I am able to store the file in Appln server.
I want to send the file created by the program thru FTP to D3 server.
I know the username,Password,HostID,RFC destination details.
How to send the file from FTP to D3.
If u have any program,Plz send it...
I dont want the function modules name...I want the example code ....
Thanks in advance.

Hi Sumi,
You could do it so that you create a .bat or .cmd script to your server which does your ftp transfer.
To do this you must use sm69 to create a external operating system command which you can call from FM SXPG_COMMAND_EXECUTE. To SXPG_COMMAND_EXECUTE you the file you need to transfer as a parameter.
What happens is that your abap program passes the file to windows batch script (.bat .cmd) which will then do the transfer for you.
Here's a sample of ftp-script for windows:
echo open IP_ADDRESS_TO_YOUR_SERVER > c:zftp_transfer.ftp
echo USERNAME>> c:zftp_transfer.ftp
echo PASSWORD>> c:zftp_transfer.ftp
echo put YOUR_FILE>> c:zftp_transfer.ftp
echo quit>> c:zftp_transfer.ftp
ftp -s:c:zftp_transfer.ftp
also take a look here for more details:
http://support.microsoft.com/?kbid=96269
Ok, this might be a bit trivial but if your server is unix/aix etc.. Instead of using batch script you must do a shell script.
Regards,
Ville

How to refresh XML file from my client machine

Hai All
I have temp.XML and temp.XSL template in our server machine.
when i give a print from client machine first time it gives the record,and next time it did not get refresh.Always it shows the previous records in the browser.But when i go into the server machine and click on temp.xml,it shows the current record(correct records)
How to refresh XML file from my client machine?
Regards
Dhina

You never delete a Time Machine backup by dragging it to the Trash. You are supposed to use the TM application to manage the backups. What you will need to do now is to simply erase the drive using Disk Utility.

How to upload XML file from Application server.

Hi,
How to upload XML file from Application server.Please tell me as early as possible.
Regards,
Sagar.

Hi,
parameters : p_file type ibipparms-path obligatory.
***DOWNLOAD---->SAP INTO EXCEL
filename1 = p_file.
call function 'GUI_DOWNLOAD'
exporting
BIN_FILESIZE                    =
    filename                        = filename1
    filetype                        = 'ASC'
APPEND                          = ' '
WRITE_FIELD_SEPARATOR           = 'X'
HEADER                          = '00'
TRUNC_TRAILING_BLANKS           = ' '
WRITE_LF                        = 'X'
COL_SELECT                      = ' '
COL_SELECT_MASK                 = ' '
DAT_MODE                        = ' '
CONFIRM_OVERWRITE               = ' '
NO_AUTH_CHECK                   = ' '
CODEPAGE                        = ' '
IGNORE_CERR                     = ABAP_TRUE
REPLACEMENT                     = '#'
WRITE_BOM                       = ' '
TRUNC_TRAILING_BLANKS_EOL       = 'X'
WK1_N_FORMAT                    = ' '
WK1_N_SIZE                      = ' '
WK1_T_FORMAT                    = ' '
WK1_T_SIZE                      = ' '
IMPORTING
FILELENGTH                      =
tables
    data_tab                        = it_stock
FIELDNAMES                      =
exceptions
   file_write_error                = 1
   no_batch                        = 2
   gui_refuse_filetransfer         = 3
   invalid_type                    = 4
   no_authority                    = 5
   unknown_error                   = 6
   header_not_allowed              = 7
   separator_not_allowed           = 8
   filesize_not_allowed            = 9
   header_too_long                 = 10
   dp_error_create                 = 11
   dp_error_send                   = 12
   dp_error_write                  = 13
   unknown_dp_error                = 14
   access_denied                   = 15
   dp_out_of_memory                = 16
   disk_full                       = 17
   dp_timeout                      = 18
   file_not_found                  = 19
   dataprovider_exception          = 20
   control_flush_error             = 21
   others                          = 22
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
Regards,
Deepthi.

How to send XML file to https server using POST

Hi, I am having an requirement, that I have to connect to https server and I have to pass an input XML file as a response server will give me output XML file.
The certificate validation part is over, I am using FileInputStream to read the XML file and attaching this to connection.getOutputStream(); but server is throwing me DTD does n't match.
Can any body tell me how to send XML file, I have to use any DOM parser to send the XML file, suggest me and give me sample code.
Thanks,

Can anybody give me the solution

How to edit xml file particular value. and how to send xml file over ip address 192.168.2.10 using ftp

how to edit xml file particular value. and how to send xml file over ip address 192.168.2.10 device using ftp through Ethernet

Hello
For using FTP function in LabVIEW, I recommend you to check this document: FTP Basics
Also, take a look at FTP Browser.vi, which is available at the Example Finder.
To edit a XML file, try to use VIs in XML palette. Maybe Write to XML.vi helps you.
Post your current VI if possible.
Regards
Mondoni

Hi How to get XML file from servlet that XI sent to my J2EE appl?

Hi All!
I have a scenario like XI sends xml file to j2ee application. In my J2EE application my servlet receives this xml. Will the xml file be in my HTTPServletRequest object? if so how to get that file from Request object.
Please help me its urgent, Any code help is highly appreciated.
My xml file will be like this:
<ns0:Http_Message_Type_Demo
xmlns:ns0="http://abcdemo.com">
<Name>ABC</Name>
<RollNo>123</RollNo>
<Address>a-4</Address>
</ns0:Http_Message_Type_Demo>
somebody should help me!please
Thanks

Hi,
You can use HTTPServletRequest object to get the XML payload.
BufferedReader reader = request.getReader(); //gets XML payload
String line = reader.readLine(); // to read the XML payload line by line
(request is the HTTPServletRequest object)
Regards,
Uma

Sending xml file from client to servlet

Hi,
I am writing the server component of an applcation, such that it will receive xml files from the clients(standalone application similar to javaSwing stuff but it's coded in C#), and the servlet will have to extract the data from the xml file and update the mySql database. it will also fulfill the client's request for xmlFiles (and extract data from DB, format to xml file and send back to client)
I'm new to implementing the servlet receiving files from clients so would need some help.
I've got 3 questions to ask:
1) How does the servlet receive/returns the xml file from the client as a series of httpPost request/response. Do i send a File or the file's contents as a String to/from the client?
2) Is it also a must to use socket for the file transfers? I have read in other posts about sockets as well as HttpURLConnection but i don't quite understand.
3) When I send a file back to the client(client is standalone application written in C# whereas server is coded in java), what do i specify for the HttpResponse.setContentType() in my servlet? (i'm returning the xml file to client)
Would really appreciate for any help rendered. If you have any useful links, would appreciate them too. Thanks a lot.
Karen

I've got 3 questions to ask:
1) How does the servlet receive/returns the xml file
from the client as a series of httpPost
request/response. Do i send a File or the file's
contents as a String to/from the client?The server will listen on some port for requests. The client has to open a socket to this server to send the file as string to the server.
see http://java.sun.com/docs/books/tutorial/networking/index.html
>
2) Is it also a must to use socket for the file
transfers? I have read in other posts about sockets as
well as HttpURLConnection but i don't quite
understand.You use HttpURLConnection to make a request using the http protocol, instead of opening a socket and then writing the html headers yourself.
3) When I send a file back to the client(client is
standalone application written in C# whereas server is
coded in java), what do i specify for the
HttpResponse.setContentType() in my servlet? (i'm
returning the xml file to client)Its up to your receiving program how to interpret this though, so you probably dont need this.

How to send XML files through Business Connector to client URL

Dear ALL
I am new to SAP BC. We have setup BC 4.8 and would like to send out a XML file from BC to Client URL. Could someone please guide me.
Please suggest solutions.
Thanks
Ahmed

Hello Mickael
Thanks for your reply. No, we do not have PI. This BC will be used for point to point communication with client.
Scenario:
R/3 server to send XML files to BC. BC will load these files ( using pub.getfile service), this file is to be parsed using pub.loaddocument service and then sent to client in XML format wrapped with digital signature. As i am new to BC i am unable to parse this file and wrap it with the digital signaature to send it.
Kindly advise on how best can we perform this action.
Thanks
Ahmed

Best Practices:: How to generate XML file from a ResultSet

Hi all,
Could someone please suggest the best practices of how to generate an XML file from a resultset? I am developing a web application in Java with Oracle database and one of my tasks is to generate an XML file when the user, for example, click a "download as XML" button on the JSP. The application is basically like an Order with line items. I am using Struts and my first thought has been to have an action class which will extend struts's DownloadAction and through StAX's Iterator API to create an XML file. I intend to have a POJO which will have properties of all columns of my order and line items tables so that for each order I get all line items and:
1. Write order details then
2. Through an iterator write line items of that order to an XML file.
I will greatly appreciate for comments or suggestions on the best way to do this through any pointers on the Web.
alex

Use a OracleWebRowSet in which an XML representation of the result set may be obtained.
http://www.oracle.com/technology/sample_code/tech/java/sqlj_jdbc/files/oracle10g/webrowset/Readme.html
http://download.oracle.com/docs/cd/B28359_01/java.111/b31224/jcrowset.htm

How to create xml file from relational tables in 10gR2

Hi,
I am very new to XML and was wondering how to create an XML file from querying relational tables. Some child tables may contain multiple rows that need to be returned in certain instances. Other queries will just be single or multiple rows from one or more tables. I would like to use the latest feathers in 10gR2. Thanks for any help you can provide.
Thanks,
Lee

Here is the first row of data created from our person table - it used the column names as the tag names:
<?xml version="1.0"?>
<ROWSET>
     <ROW>
          <MP_ID_SEQ>289</MP_ID_SEQ>
          <MP_NAME>LOBERG,JUDITH LEE</MP_NAME>
          <MP_SEX>F</MP_SEX>
          <MP_RACE>I</MP_RACE>
          <MP_DOB>19500709</MP_DOB>
          <MP_HT>504</MP_HT>
          <MP_WT>170</MP_WT>
          <MP_EYE_CLR>BLU</MP_EYE_CLR>
          <MP_HAIR_CLR>BRO</MP_HAIR_CLR>
          <MP_SKN>RUD</MP_SKN>
          <MP_SMT>POCKMARKS</MP_SMT>
          <MP_SOC>517607968</MP_SOC>
          <MP_OLN>517607968</MP_OLN>
          <MP_OLS>MT</MP_OLS>
          <MP_OLY>2007</MP_OLY>
          <MP_CAUT_MED>70</MP_CAUT_MED>
          <MP_VISION_SCRIPT>C0RRECTIVE LENSES</MP_VISION_SCRIPT>
          <MP_DNA_AVAIL>N</MP_DNA_AVAIL>
          <CREATED_BY>MMPS</CREATED_BY>
          <DTM_CREATED>31-AUG-06</DTM_CREATED>
          <MI_INC_ID_SEQ>288</MI_INC_ID_SEQ>
          <MP_ALERT>N</MP_ALERT>
     </ROW>

How to read .xml file from embedded .swf(flash output) in captivate

I have been trying to read .xml file from the .swf (Flash output) that is embedded within the captivate file but no luck yet . Please if anyone got any clue on how get this thing done using Action script 3.0 then let me know. I am using Adobe Captivate 5.5 at present and Flash CS 5.5.
I am well aware about how to read .xml file through action script 3.0 in flash but when insert the same flash in captivate and publish nothing comes in captivate output. I would higly appreciate if anyone could help me out with that.
Here is is graphical demonstration of my query :
Message was edited by: captainmkv

Hi Captainmkv,
Does the information in this post cover what you're trying to do: http://forums.adobe.com/message/5081928#5081928
Tristan,

[b]Urgent How to send XML file from forms 6.0 to a url to access database[/

Similar Messages

Maybe you are looking for