B2B batching fails for a failed message

We have B2B batching implemented for outbound messages. If any one of the messages (to be batched in next cycle) ends in an error, whole Batch is stopped and no message is completed.
Is there any set up we can do, so that other messages still get batched and processed successfully.
Regards
Ravdeep

I hope you are working with 11g. Please set the B2B EM property b2b.outboundOneErrorAllError to false. Please refer -
http://docs.oracle.com/cd/E17904_01/integration.1111/e10229/app_isags.htm#CIHDFDIC
Regards,
Anuj

Similar Messages

B2B batching fails for one failed message

We have B2B batching implemented for outbound messages. If any one of the messages (to be batched in next cycle) ends in an error, whole Batch is stopped and no message is completed.
Is there any set up we can do, so that other messages still get batched and processed successfully.
Regards
Ravdeep

B2B batching fails for a failed message
Regards,
Anuj

SetXmlDoc is failing for Container Based messages in 8.51 tools

In 8.51 tools SetXmlDoc is throwing below error.
"This method can only be used by nonrowset-based messages".
Container message contains 3 rowset-based part messages.
Currently we are using these rowset-based part messages in transformation app engine. So we need to construct the message payload using %TransformData in transform app engine.
Is there any other alternate way to set the XML content into Container based message.
I tried using LoadXMLString and LoadXMLPartString methods of message class, but these two also not setting the data in message.
Please suggest me if anybody has any other approach
Thanks,
Azeem

The idea of using rowset message is that you do not have to worry about the XML. I would suggest, you copy the generated XML and clean it out (remove PS specifics like PSCAMA). You can create a new non rowset message with that. This should give you the flexibility you want.
Let me know if you have any questions.
Regards,
RK

Job failed for BiztalkMgmtDb failed

I'm trying to run a job in sql server agent for BiztalkMgmtDb and it is failing.
I'm getting below error
I downloaded BT terminator 2.1 and I'm not sure which category I need to select then execute
Christiane

For the complete list refer:
Using BizTalk Terminator to resolve issues identified by BizTalk MsgBoxViewer and the BizTalk 2010 Monitor BizTalk Server Job
Issue Identified by Monitor BizTalk Server Job
Terminator Resolution Task
Terminator View Task
Messages without any references
Repair Refcounts for All Messages
(in Manage task category)
No view task - rely on the Monitor job to identify these
Messages without reference counts
Repair Refcounts for All Messages
(in Manage task category)
View Count of Messages Without RefCounts
Messages with reference count less than 0
Repair Refcounts for All Messages
(in Manage task category)
No view task - rely on the Monitor job to identify these
Message references without spool rows
Run the View task first. If the InstanceExists value is true, use the uidInstanceID value to find the instance in Admin Console and terminate it. If the InstanceExists value is false, that means
this message ref is missing spool row AND instances row. In that case you can run the DELETE Orphaned Messages Terminator task (in Delete task category)
View Message References Without Spool Rows.
Message references without instances
DELETE Orphaned Messages in All Hosts
DELETE Orphaned Messages in Specific Host
(both in Delete task category)
View Count of Orphaned Messages by Host
Instance state without instances
No resolution task - contact MS support
No view task - rely on the Monitor job or MBV to identify these
Instance subscriptions without corresponding instances
DELETE Orphaned Instance Subscriptions
(in Delete task category)
View Count of Orphaned Instance Subscriptions
Orphaned DTA service instances
Repair Orphaned DTA Service Instances
(in Manage task category)
View Count of Orphaned DTA Service Instances
Orphaned DTA service instance exceptions
DELETE Orphaned DTA Service Instance Exceptions
(in Delete task category)
View Count of Orphaned DTA Service Instance Exceptions
TDDS is not running on any host instance when global tracking option is enabled
No resolution task within terminator - BizTalk Administrator needs to make sure one of the hosts has Tracking enabled and there is a running host instance for that host
No view task - rely on the Monitor job or MBV to identify these
Please mark as answer or vote as helpful if my reply does

MS SQL: Mnt Plan creation message: "Create failed for JobStep "Subplan"

Hi, We have installed MS SQL 2005 from the SAP Business One CDs. We have SAP version 2007a installed also. When I use the MS SQL "wizard" ro create a maintenance plan I get the "Create failed for JobStep "Subplan" message ... the detailed message says "The specified " '@subsystem' is invalid
I have sucessfully created maintenanc eplans on similar installations....
Thanks in advance!
Simon

You may check this link:
http://www.developersdex.com/sql/message.asp?p=580&r=6569670
Thanks,
Gordon

Reports successfully execute but generate a login failed for user 'sa' err

I am running Crystal Reports Server XI R2. Classic ASP is used to generate embedded reports within our application. The crystal reports use ODBC to connect to a SQL Server 2005 database. The reports successfully generate in our Classic ASP application. However in SQL Server 2005, the following error messages are being generated each time a crystal report is ran:
- Login failed for user 'sa'.
- Error: 18456, Severity: 14, State: 8.
We know that we are passing the correct username/password to the crystal reports, becuase they execute successfully.
It appears that when the report is called, Crystal Reports appears to conect to SQL Server using a username/password that we didn't provide it at execution time, this fails and the SQL Server 'login failed for user' is generated. Then it runs the report using the username/password we provide and it successfully generates a report.
I have ran Profiler against the SQL Server Database and the 'Login failed for user 'sa' ' errors have a ApplicationName of either 'Seagate Crystal Reports' or 'Crystal Reports'. Therefore I know it is Crystal Reports generating these errors in SQL Server.
Does anyone have any ideas on how to stop these SQL Server 'Login failed for user 'sa' ' errors being generated?

What happens if you use Profiler when running the report using Crystal Report Designer?
If the report is ran through Crystal Report Designer, NO 'Login failed for user' error messages appear in profiler. Everything looks ok when ran in Designer.
Also, need to know what patch level you are on?
We are running Crystal Reports Server XI Release 2, Version: 11.5.8.8265
No additional patchs have been applied since Crystal Reports Server was installed.
We may try the SA account if one of the connections fail to log on with the credentials you provided. Verify the user you logged on with has rights to all tables.
The reports were running through our application using the SA account. The SA account has permissions to these tables. The reports do generate results and appear perfectly fine in the application. The issue is that when our application requests the report from Crystal Reports Server. Crystal Reports Server delivers the correct report to our application. However during the process to generate the report, 'login failed for user 'sa' ' errors are being generated in SQL Server 2005.
Also, I have tried creating a completely new SQL user called 'crystaluser'. I ran the report using Crystal Report Designer and used the crystaluser logon and saved the report. Then I ran the same report through our application. SQL Profiler will then display 'login failed for user 'crystaluser''.
Its seems as though Crystal Reports Server is first executing the report using the default SQL user saved with the report, but is either sending a blank password or no password at all. This generates the 'login failed for user' in SQL Server 2005. But it then uses the SQL username/password my application gives it and successfully generates the report. Of course this is only speculation.

Portal Import Precheck failed for provider objects

I am trying to import some portal pages from one server to the other. I got all these precheck failed message posted as below. Can anybody tell me what was going on? My OAS version is 9.0.4
Many thanks,
Pre-Check
Start of Importing External Application
Validating and registering provider: LAC_PAGESE7985EE4E9371F2AE030007F01002436
Precheck complete for PROVIDER LAC_PAGESE7985EE4E9371F2AE030007F01002436
Validating and registering provider: DB_PROV_LAC
Precheck complete for PROVIDER DB_PROV_LAC
Precheck complete for APP_TEMPLATE LAC_GENERAL_TEMPLATE
Component DYN_HEADER with id 4467146863 cannot be reused or overwritten, since the name DYN_HEADER is in use by another Component.
Precheck failed for DYNAMIC DYN_HEADER
Component DYN_FOOTER with id 4478432881 cannot be reused or overwritten, since the name DYN_FOOTER is in use by another Component.
Precheck failed for DYNAMIC DYN_FOOTER
Precheck failed for DYNAMIC DYN_LAC_MENU
Precheck failed for DYNAMIC LAC_STAGE_AREA
Precheck failed for DYNAMIC DYN_HOME_DISPLAY
Precheck failed for DYNAMIC PAGE_LINE
Precheck failed for DYNAMIC DYN_QRY_COUNTRIES
Precheck failed for FOT FRM_UPD_COUNTRIES
Precheck failed for FOT FRM_UPD_STATES
Precheck failed for DYNAMIC DYN_QRY_CDS
Precheck failed for FOT FRM_UPD_CDS
Precheck failed for DYNAMIC DYN_QRY_CITIES
Precheck failed for FOT FRM_UPD_CITIES
Precheck failed for FOT FRM_UPD_HSS
Precheck failed for DYNAMIC DYN_QRY_STAFF_ROLES
Precheck failed for FOT FRM_UPD_STAFF_ROLES
Precheck failed for DYNAMIC DYN_QRY_SURVEY_MOTHODS
Precheck failed for FOT FRM_UPD_SURVEY_METHODS
Precheck failed for DYNAMIC DYN_QRY_SURVEY_TYPES

The message
Component DYN_HEADER with id 4467146863 cannot be reused or overwritten, since the name DYN_HEADER is in use by another Component.
indicates that a component with the same name already exists in the target. However, this component does not come from the same source as the one in the transport set (hence the difference in the id). This could also happen if the same component name was used to create objects in the target environment.
In order for pre-check to succeed, you will either have to rename the components in source (and re-export them i.e., create new dumps) or rename them in target so they don't clash.

Any example for ENQUEUE_ARRAY for JMS compatible messages?

Is there any examples of using ENQUEUE_ARRAY with messages that are compatible with JMS? either a VARRAY or NESTED TABLE of JMS content?
I have an after insert trigger that propagates to JMS and in the for each row loop I'd much rather enqueue as a batch than for each individual message.
It's hard enough getting JMS compatible content working where you are enqueuing just a single message but just what's involved to get this working with batches of JMS compatible messages?

Hi prajithparan,
Thanks for the response. I already looked at the link and a few other links in this forum that are related to array inserts/updates. However, I could not find answers to my specific questions. I am specifically concerned with the setup of parameters to the API calls (OCIBindByName and OCIBindArrayOfStruct) that fully reflects the two-dimensional nature of the array of structs that I am trying to insert.
Moreover, I need to set the data type of the columns to be inserted as SQLT_STR. I think this data type requires the programmer to supply the length of the null terminated C strings as well. If we are inserting just one column, we can provide the length of each of the strings to be inserted into a VARCHAR2 column as part of a OCIBind call, for each of those columns.
Since in an array insert, we are supplying multiple rows at the same time, how do we supply the lengths of strings to be inserted ? Should it be some form of two-dimensional array ?
I could not get clear answers to these questions from either the Oracle documentation or the links on this forum. May be the answers are there and I am just missing them ?

The Imap command UID copy (to deleted messages) failed for the mailbox "bulk mail" with server error UID copy mailbox in use. PLease try again later

The Imap command UID copy (to deleted messages) failed for the mailbox "bulk mail" with server error UID copy mailbox in use. PLease try again later

What program are you using? And what version?

Exception Message: The form cannot connect to the data source. Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'

When opening a form in SharePoint 12013 that was created from Infopath 2013, I get the following error.
You do not have permissions to access a database that contains data required for this form to function correctly.
An entry has been added to the Windows event log of the server.
Log ID:5566
When I go to the log files on the SharePoint server. I see the following error.
Exception Message: The form cannot connect to the data source. Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'
I am guessing this has something to do with the UDCX connection and the database.
Can anyone help me get this fixed?

Hi Jim,
Please check the following kb article when it occurs 5566errro with the UDCX conection file, try the method of using the Secure Store Service to store alternate credentials for the data connection method, or the method of stating the credentials
in the UDC file explicitly.
Also check if it could help with setting sql server as "SQL Server and Windows Authentication mode".
http://support.microsoft.com/kb/981684
Thanks
Daniel Yang
TechNet Community Support

Save validation failed for message

Hi !
I am trying to save a workflow to the database however I am getting an error saying 'Save validation failed for message 'WFTEST/COMPLAINT_REJECTED'
underthis i got
401: Could not find token 'NOTE' among message attributes
401: Could not find token 'FORWARD_TO_USERNAME' among message attributes'
What must I do to stop getting this error message.

Hi,
I've answered your duplicate post on the [WorkflowFAQ forum|http://smforum.workflowfaq.com/index.php?topic=998.0].
HTH,
Matt
WorkflowFAQ.com - the ONLY independent resource for Oracle Workflow development
Alpha review chapters from my book "Developing With Oracle Workflow" are available via my website http://www.workflowfaq.com
Have you read the blog at http://www.workflowfaq.com/blog ?
WorkflowFAQ support forum: http://forum.workflowfaq.com

PO message should get failed for P.grp other than AB1 and AB2

Hello SAP Gurus,
I have a requirement like PO message should get failed for P.grp other than AB1 and AB2.
Detail explanation:
I have a P.grp AB1,AB2,AB3,AB4 etc.... The current process is once PO created and saved the message will be triggered and IDOC is transmitted to the vendor, irrespective of what ever the P.grp.
My requirement is like the PO message should get failed if P.grp is other than AB1 and AB2, and reason should be shown any where in IDOC or in messages.
Pls advice.
Thanks.

Hi Jurgen,
Thanks for the reply...
There are only 5 vendors which is relevant for EDI and P.grp AB1 and AB2 denotes EDI PO, same P.grp mapping has been done in PI also via data ID. The user sometimes selects the P.grp AB3, AB4 etc incorrectly and it goes to the vendor which in-turn again the customer has to amend the PO.
Now I'm planning to include a piece of logic while saving the PO, check if the vendor is EDI vendor then P.grp should be AB1 or AB2, if it is a different P.grp then the system will not allow to save the PO,so that the user will select the relevant P.grp for EDI vendors. Pls let me know your thought and inputs.
Thanks.

Receiving error message "Login failed for user 'NT AUTHORITY\SYSTEM'" every minute on server which is the mirror

Hello,
I have 2 SQL Server 2008 R2 machines that are configured with database mirroring (using certificates as authentication), there is no witness configured. My issue is that the mirror server is receiving at least one of the below pared messages every
second and filling up my sql error log quickly.
SYSTEM is the service account user for the MSSQLSERVER service.
[298] SQLServer Error: 4060, Cannot open database "<databasename>" requested by the login. The login failed. [SQLSTATE 42000]
[298] SQLServer Error: 18456, Login failed for user 'NT AUTHORITY\SYSTEM'. [SQLSTATE 28000]
The database has a status of: Affected database state is: Mirror, Synchronized/Restoring...
When I checking the database mirror monitor, it shows that its mirroring ok and everything has green checkboxes.
Is there a way to stop all these errors being logged, I'm assuming this isn't normal.
Marcus

Yes i have faced the same issues and tried everything and nothing was using this account, system was ended up with creating few GB's sql error log files everday.. and finally i had two options, 1 -- Rebuild the instance completely 2. Change the SQL Server
Audit settings to Only successful logins and restart the instance.. ( May be your current sql server level Audit setting is set to Failed & Successful logins..
Remeber my server was a DR so I have changed the SQL Server Audit settings to only Successful logins.. but production servers we will monitor both... :)
Raju Rasagounder Sr MSSQL DBA

BCS - Message from External System : 'Login failed for user 'NT AUTHORITY\IUSR'.'.

Hello,
I have create a an external content type .
I Choose "Connect with user's Identity".
I create a external list that uses the ExternalContentType.
When I try open the external list from browser by User "TestUser" . I get the following error "Message from External System : 'Login failed for user 'NT AUTHORITY\IUSR'.'"
My Question :
I need to know why pass the credential "NT AUTHORITY\IUSR" to connect to the data base not the
current log in"TestUser" ? How Can I solve it ?
Thanks
Hema
ASk

Hi,
did you configure Kerberos delegation?
NTLM fails when you try to open external list from client computer, because SharePoint cannot pass user's identity - "Double Hop" issue.
Take a look at confguring Kerberos for SharePoint 2010 white paper
Download Configuring Kerberos Authentication for Microsoft SharePoint 2010 Products from Official Microsoft Download Center
http://www.microsoft.com/en-us/download/details.aspx?id=23176
Robi MCT Kompas Xnet d.o.o. Ljubljana | blog: http://xblogs.kompas-xnet.si | website: http://www.kompas-xnet.si
Slovenia
Please vote if you find reply useful or mark it as answer.
Thank you

Error message: .Mac account credentials validation failed for account...

I have published via iWeb for some time, but after I created a new webpage, I have been unable to publish again. This is the latest error message...
".Mac account credentials validation failed for account “account name."
I have tried publishing via wireless internet and direct connect to router, with the same results. The apple support site recommendation is to upgrade to iWeb 1.1.1 or higher, but I'm already running 1.1.2.
Thanks!
Craig

I have this same problem SUDDENLY. I never have had issues before.I have not tried to publish since 10/04 so I don't know when this started...? what is the answer. My .mac account is fine and working.

B2B batching fails for a failed message

Similar Messages

Maybe you are looking for